ABZ99FT4047CM200 UHF 25W Mobile Radio

GM3188 User Guide 6804113J31-O COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse- engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. © Motorola Inc., 2003 MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. InsideCover.fm Page 1 Friday, April 18, 2003 2:21 PM Turning the Radio On or Off 1. Rotate the On/Off/Volume Control knob clockwise. You will hear the self-test pass tone and see the green LED indicator light momentarily. 2. Rotate the On/Off/Volume Control knob counterclockwise until you hear a click and both the display and the LED indicators turn off. Adjusting the Volume 1. Turn the On/Off/Volume Control knob clockwise to increase the volume, or counterclockwise to decrease the volume. Selecting a Radio Channel 1. Press the or button to select the desired channel. Sending a Call 1. Turn radio on and select appropriate channel. 2. Press PTT button, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. 3. Release PTT button to listen. Receiving a Call 1. Turn radio on and adjust volume to the desired level. 2. Select desired channel. 3. To respond to an incoming call, press PTT button, hold the microphone 1 to 2 inches (2.5 to 5 cm) from your mouth, and speak clearly into it. Starting or Stopping Scan 1. Press the preprogrammed Scan button to start scan. The green LED indictor blinks during scan operation. Or, select a channel that has been prepro- grammed to start Auto Scan. 2. Press the Scan button again to stop scan. Or, select a channel that has not been preprogrammed to stop Auto Scan. Deleting a Nuisance Channel During Scanning 1. While radio is on a nuisance channel, hold down preprogrammed Nuisance Delete button until you hear a tone. 2. Release Nuisance Delete button. GM3188 Quick Reference Card Record the functions for your radio’s programmable buttons in the table provided below. For further information, see page 8 of this User Guide. Programmable Button 2 (P2) Red/Yellow/Green LED Indicators Programmable Button 1 (P1) Microphone Jack Knob On/Off/Volume 7-Segment Display Channel Selector Buttons High Power Indicator ButtonFunctionShort Press Long Press Hold Down Page 10_QR-Card.fm Page 21 Thursday, March 20, 2003 4:18 PM LED IndicatorsAudio Indicators for Programmable Buttons LED State/ColorIndication Radio Call RedTransmitting Flashing RedReceiving Flashing RedChannel Busy Scan Flashing GreenScanning for activity Call Alert Flashing YellowIndicates receiving a Call Alert Selective Call Flashing YellowIndicates receiving a Selective Call Sticky Monitor/Open Squelch YellowWhile monitoring High/Low Power Dot on DisplayIndicates High Power Dot Not On DisplayIndicates Low Power Programmable Button Positive Indicator Tone Negative Indicator Tone Scan Start scan Stop scan Power Level High power selected Low power selected Squelch Tight Squelch Normal Squelch Repeater/ Talkaround Does not use repeater Uses repeater VOXVOX enabled VOX disabled Local/Distance Local Mode Distance Mode 10_QR-Card.fm Page 22 Thursday, March 20, 2003 4:18 PM 1 English CONTENTS CONTENTS Safety Information. . . . . . . . . . . . . . . . . . . . 2 Product Safety and RF Exposure Compliance. . . . . . . . . . . . . . . . . . 2 Radio Overview. . . . . . . . . . . . . . . . . . . . . . 3 Parts of the Radio . . . . . . . . . . . . . . . . . . . . . 3 Optional Enhanced Keypad Microphone (RMN5029) . . . . . . . . . . . . . . . . . . . . . . . 4 On/Off/Volume Knob . . . . . . . . . . . . . . . . 5 Seven Segment Display. . . . . . . . . . . . . . 5 Channel Selector Buttons . . . . . . . . . . . . 5 LED Indicators . . . . . . . . . . . . . . . . . . . . . 5 Programmable Buttons . . . . . . . . . . . . . . 6 Push-to-Talk (PTT) Button. . . . . . . . . . . . 6 Microphone . . . . . . . . . . . . . . . . . . . . . . . 6 Use with Enhanced Keypad Microphone (RMN5029) . . . . . . . . . . . . . . . . . . . . . . . 6 Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . 8 Improved Audio Features . . . . . . . . . . . . . . . 8 Companding. . . . . . . . . . . . . . . . . . . . . . . 8 Getting Started . . . . . . . . . . . . . . . . . . . . . . 9 Turning the Radio On or Off . . . . . . . . . . . . . 9 Adjusting the Volume . . . . . . . . . . . . . . . . . . 9 Selecting a Radio Channel. . . . . . . . . . . . . . .9 Sending a Call . . . . . . . . . . . . . . . . . . . . . . .10 Receiving a Call . . . . . . . . . . . . . . . . . . . . . .10 Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . .10 VOX Operation . . . . . . . . . . . . . . . . . . . . . . .11 Radio Calls . . . . . . . . . . . . . . . . . . . . . . . . .12 Selective Radio Inhibit . . . . . . . . . . . . . . . . .12 Repeater or Talkaround Mode . . . . . . . . . . .12 Setting the Power Level . . . . . . . . . . . . . . . .12 Setting Tight or Normal Squelch. . . . . . . . . .13 Receiving a Selective Call . . . . . . . . . . . . . .13 Receiving a Call Alert Page . . . . . . . . . . . . .13 Setting Local or Distance Mo…

Text truncated - open the document above for the full version.

English Product Safety and RF Energy Exposure Booklet for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site Control Stations ATTENTION! The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. © Motorola, Inc. 2003 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 Printed in U.S.A. 8/03. *6881095C99* 68P81095C99-A 2 English RF Energy Exposure Awareness and Control Information, and Operational Instructions for FCC Occupational Use Requirements NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola 2-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of 2-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 3 English Please refer to the following Web sites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits. http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for mobile 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. Your Motorola 2-way radio has a RF exposure product label. Also, your Motorola user manual, or separate safety booklet, includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standard Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio antenna radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2003 • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular, and PCS product certification.” RF Exposure Compliance and Control Guidelines and Operating Instructions To control exposure to yourself and others and to ensure compliance with the RF exposure limits, always adhere to the following procedures. Guidelines: • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met. Instructions: •Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio 5 English generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). •Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away, as shown in Table 1, from the body of a vehicle with a properly installed antenna. This separation distance will ensure that there is sufficient distance f…

Text truncated - open the document above for the full version.

Radius CM200 ™ /CM300 ™ & PM400 ™ Commercial SeriesTwo-Way Radio Installation Guide MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office.All other product or service names are the property of their respective owners. © 2002, 2003 Motorola, Inc. All rights reserved. Printed in U.S.A. *6802966C25*68P02966C25-A i Table of Contents Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards ............ iii Information for Vehicles with Electronic Anti-Lock/Anti-Skid Brakes .......................................iv Installation Warnings .............................................................................................iv Installation Precautions ..........................................................................................iv Braking System Tests ............................................................................................iv Chapter 1Introduction 1.1 General Information ............................................................................................... 1 1.2 Plan the Installation ............................................................................................... 1 Chapter 2DC Power Cable Installation 2.1 Planning the Power Cable Installation ................................................................... 2 2.2 Power Cable Installation Procedure ...................................................................... 2 Chapter 3Trunnion Installation 3.1 Planning the Mounting Trunnion Installation .......................................................... 5 3.2 Trunnion Installation Procedure ............................................................................. 5 Chapter 4Antenna Installation 4.1 Antenna Installation and Compliance with Radio Frequncy (RF) Energy Safety Standards................................................................................ 8 4.2 Selecting an Antenna Site/Location on a Metal Body Vehicle ................................ 8 4.3 Antenna Installation Procedure .............................................................................. 9 4.4 Completing the Installation .................................................................................... 9 Chapter 5Installation Options 5.1 Mobile Dashboard Mounting ................................................................................ 10 5.1.1Installing the Mounting Frame into the Dashboard ................................. 10 ii 5.1.2Inserting the Radio into the Mounting Frame (Figure 5.1)...................... 10 5.1.3Removing the Radio from the Mounting Frame ..................................... 11 5.2 External Speaker Installation ...............................................................................11 5.3 Visor Microphone Installation ...............................................................................12 5.3.1Connecting to the Mobile Radio ............................................................. 12 Chapter 6Accessory Connections 6.1 Accessory Connector Pin Functions ....................................................................13 6.2 Connection Plan for Accessories .........................................................................15 Chapter 7Noise Sources 7.1 Introduction ..........................................................................................................16 7.2 Radiated Noise .....................................................................................................16 7.3 Conducted Noise ..................................................................................................17 7.4 Induced Noise ......................................................................................................17 Chapter 8Operation of a Conventional Ignition System 8.1 Introduction ..........................................................................................................18 8.2 Sources of Ignition Interference ...........................................................................18 Chapter 9Detection of Noise Sources 9.1 Noise Detection Procedure ..................................................................................20 9.2 Sources of Noise ..................................................................................................21 Chapter 10Noise Reduction Techniques 10.1 General ................................................................................................................22 10.2 Ignition System Interference ................................................................................22 10.2.1 Engine Maintenance and Tune-Up......................................................... 22 10.2.2 Available Noise Reduction Kits .............................................................. 22 10.2.3 Ignition Coil Interference ........................................................................ 23 10.2.4 Distributor Interference ........................................................................... 23 10.2.5 Battery Connections ............................................................................... 23 10.3 Alternator ..............................................................................................................24 10.4 Voltage Regulator Noise ......................................................................................25 10.5 Hood and Trunk Lid Noise ...................................................................................25 10.6 Other Electrical Noises .........................................................................................25 10.7 Ground Bonding ...................................................................................................26 Safety-iii INSTALLATION REQUIREMENTS FOR COMPLIANCE WITH RADIO FREQUENCY (RF) ENERGY EXPOSURE SAFETY STANDARDS ATTENTION! This radio is intended for use in occupational/controlled conditions, where users have full knowledge of th…

Text truncated - open the document above for the full version.

FCC ID: ABZ99FT4047 ______________________________________________________________________________ EXHIBIT 13A 1309 East Algonquin Road, Schaumburg, Illinois 60196 Date: September 26, 2003 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4047. Dear Sir or Madam: Motorola Inc, 1309 East Algonquin Road, Schaumburg, Illinois, herein submits application for Certification of the subject transmitter. This transmitter is intended for use in a Mobile Radio environment with capabilities for clear communications with a variable transmit power of 1 to 25 watts operating within the following frequency ranges: 403 to 440 MHz. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Part 22, 74 and 90 The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. Contact Donna Tokarz at (847) 576-7245 if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected]

FCC ID: ABZ99FT4047 REQUEST FOR CONFIDENTIALITY Date: September 26, 2003 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4047 Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected] EXHIBIT 13B SHEET 1 OF 1

Applicant: Motorola Inc. FCC ID: ABZ99FT4047 External Photographs Pursuant to 47 CFR 2.1033(c)12 Figure 3-1: Front and side views of complete radio. Figure 3-2: Front view of complete radio. EXHIBIT 3 SHEET 1 OF 4 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 3-3: Rear view of complete radio showing antenna connector, DC cable, and accessory connector. Figure 3-4: Rear view of complete radio showing FCC Label location. FCC Label Location EXHIBIT 3 SHEET 2 OF 4 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 3-5: RF Safety Label Location; attached at Microphone cord. Figure 3-6: Close-Up of RF Safety Label RF Safety Label EXHIBIT 3 SHEET 3 OF 4 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 3-6: Antenna connector options, BNC on left, mini-UHF on right. EXHIBIT 3 SHEET 4 OF 4

Applicant: Motorola Inc. FCC ID: ABZ99FT4047 IDENTIFICATION LABEL Pursuant to 47 CFR 2.925(a), 2.1033(c), 2.0165 LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the bottom of the unit near the front. Shown below is a photo of the actual label affixed to the cast chassis of the transmitter. TYPE The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/inch. EXHIBIT 1A – GENERAL INFORMATION 1. Application References: TIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Sec. 2.1033-2.1057, Part 22, Part 74 and Part 90, Section 90.210. 2. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commission’s rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Part 22, 74 and 90. Maximum transmitter power shall not be adjustable by the user. EXHIBIT 1 SHEET 1 OF 1

Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Internal Photographs Pursuant to 47 CFR 2.1033(c)12 Figure 9-1: Top Side of PCB without shields. EXHIBIT 9 SHEET 1 OF 7 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 9-2: Bottom Side of PCB without shields. EXHIBIT 9 SHEET 2 OF 7 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 9-3: Top Side of PCB with shields. EXHIBIT 9 SHEET 3 OF 7 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 9-4: Bottom Side of PCB with shields. EXHIBIT 9 SHEET 4 OF 7 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 9-5: Top View of PCB placed in chassis. EXHIBIT 9 SHEET 5 OF 7 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Figure 9-6: Top View of PCB placed in chassis with shield covering transmitter section. EXHIBIT 9 SHEET 6 OF 7 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 EXHIBIT 9 SHEET 7 OF 7 Figure 9-7: Top view of chassis with main shield in place.

Applicant: Motorola Inc. FCC ID: ABZ99FT4047 PARTS LIST AND TUNE UP PROCEDURES (CONFIDENTIALITY REQUESTED) This exhibit contains a list of the semiconductor devices used in the transceiver and the test equipment and tuning procedures for maintaining the transceiver. EXHIBIT 10A Function of RF Semiconductors and Other Active Devices EXHIBIT 10B List of Recommended Test Equipment for Servicing EXHIBIT 10C Tune Up Procedure EXHIBIT 10 SHEET 1 OF 16 Applicant: Motorola Inc. FCC ID: ABZ99FT4047 Exhibit 10A – Function of RF Semiconductors and Other Active Devices Pursuant to 47 CFR 2.1033(c)(10) EXHIBIT 10 SHEET 2 OF 16 Reference # Part # Circuit Application Operating Freq. Industry Equivalent D102 4813833C02 DC Switch DC MMBD6100 D103 4802482J02 Antenna Switch 403-440MHz MA4P959 D104 4802482J02 Antenna Switch 403-440MHz MA4P959 D105 4805218N57 Reverse Volt. Peak Detector DC RB715F D106 4805218N57 Reverse Volt. Peak Detector DC RB715F D200 4802233J09 Voltage Multiplier 1.05MHz IMN10 D201 4802233J09 Voltage Multiplier 1.05MHz IMN10 D202 4862824C03 Crystal Warp DC 1SV232 D203 4805649Q13 RX VCO Frequency Control 358-395MHz 1SV228 D204 4805649Q13 TX VCO Frequency Control 403-440MHz 1SV228 D205 4862824C01 TX VCO Modulator Audio-440MHz 1SV229 D301 4802245J97 Switching Diode DC DAN235ETL D302 4802245J97 Switching Diode DC DAN235ETL D303 4802245J97 Switching Diode DC DAN235ETL D304 4802245J97 Switching Diode DC DAN235ETL D305 4880142L01 Switching Diode DC MMBV3401LT D400 4813833C07 Steering Diode DC MMBD7000 D401 4813833C02 Steering Diode DC MMBD6100 D402 4809948D42 Steering Diode DC RB751V D500 4813833C02 DC Switch DC MMBD6100 D502 4813825A23 Steering Diode DC MMSD301 D511 4813833C02 DC Switch DC MMBD6100 D513 4813833C02 DC Switch DC MMBD6100 Q100 4886163B01 TX RF Power Amplifier 403-440MHz MRF1535 Q101 4813824A10 DC Switch DC MMBT3904 Q102 4813824A10 DC Switch DC MMBT3904 Q103 4813824A06 DC Switch DC MMBTA13 Q105 4886212B01 TX Driver Stage 403-440MHz MRF1518 Q106 4805128M2 7 Current Source DC BSR33 Q200 4802245J95 RX Injection Amplifier 358-395MHz BFS540 Q201 4809939C04 DC Switch DC UMC3 UM5 Q300 4809940E02 DC Switch DC DTC114YE Q301 4813824A17 Current Source DC MMBT3906 Q302 4813824A10 DC Switch DC MMBT3904 Q303 4802245J95 RX Injection Amplifier 358-495MHz BFS540 Q304 4809939C04 DC Switch DC UMC3 UM5 Q305 4802197J95 IF Amplifier 44.85MHz PBR941 Q306 4813824A17 DC Switch DC MMBT3906 Q400 4809940E02 DC Switch DC DTC114YE Q401 4880141L03 DC Switch DC BCW68GLT1 Q403 4809940E02 DC Switch DC DTC114YE Q404 4809940E02 DC Switch DC DTC114YE Q405 4809940E02 DC Switch DC DTC114YE Q407 4809940E02 DC Switch DC DTC114YE Q408 4880048M0 1 DC Switch DC DTC144EKA Q409 4880048M0DC Switch DC DTC144EKA Applicant: Motorola Inc. FCC ID: ABZ99FT4047 EXHIBIT 10 SHEET 3 OF 16 1 Q410 4880048M0 1 DC Switch DC DTC144EKA Q411 4880048M0 1 DC Switch DC DTC144EKA Q412 4880048M0 1 DC Switch DC DTC144EKA Q413 4809940E02 DC Switch DC DTC114YE Q414 4809940E02 DC Switch DC DTC114YE Q416 4809940E02 DC Switch DC DTC114YE Q417 4813824A10 DC Switch DC MMBT3904 Q500 4813824A10 DC Switch DC MMBT3904 Q501 4809940E02 DC Switch DC DTC114YE Q502 4809940E02 DC Switch DC DTC114YE Q503 4813824A10 DC Switch DC MMBT3904 Q504 4880048M0 1 DC Switch DC DTC144EKA Q505 4813824A10 DC Switch DC MMBT3904 Q506 4813824A10 DC Switch DC MMBT3904 U100 5113818A01 Power Control DC LM2904DR2 U101 5185130C65 TX Pre-Driver Stage 403-440MHz 30C65 U102 5113818A01 Power Control DC LM2904DR2 U103 5113819A04 Power Control DC MC3303 U200 5185963A27 Frequency Synthesizer 1-440MHz FRACN_63A27 U201 5105750U54 VCO Buffer IC 358-440MHz 50U54 U300 5186144B01 RX Back-End IC Audio-455KHz SA616 U301 5109522E10 Inverter DC TC7W04F U302 4808612Y05 Quad Mixer Diode 358-440MHz SMS3928 U400 5102463J64 EEPROM 1MHz X25128-2.7 U403 5102226J56 Microprocessor 7.56MHz MC68HC11FL0 U404 5189233U02 FLASH 3.78MHz AT49LV002N_70V I U405 5113805A75 Shift Register DC MC74HC595ADR2 U501 5102190C33 Voltage Regulator DC LM2941T U503 5105469E65 Voltage Regulator DC LP2951C U504 5185130C53 Audio and Signaling IC DC 30C53 U505 5113818A01 Filter Audio LM2904DR2 U506 5113818A01 Filter Audio LM2904DR2 U507 5113818A01 Filter Audio LM2904DR2 U508 5113816A30 Voltage Regulator DC MC33269D U509 5113806A20 Analog Switch DC MC14053BDR2 U510 5104187K94 Voltage Regulator DC LP2986ILDX U514 4802393L66 DC Switch DC SI3455ADV VR101 4813830A18 DC Switch DC MMBZ5235B VR102 4813830A15 Current Source DC MMBZ5232B VR402 4813830A09 DC Switch DC MMBZ5226B VR500 4813832C77 Reverse Protection DC MR2835S VR501 4813830A14 Reverse Protection DC MMBZ5231B VR503 4813830G09 Reverse Protection DC MMSZ4684 VR504 4813830G09 Reverse Protection DC MMSZ4684 VR692 4813830A75 ESD Protection DC MMBZ20VAL VR693 4813830A77 ESD Protection DC MMBZ33VAL VR694 4813830A75 ESD Protection DC MMBZ20VAL VR695 4813830A77 ESD Protection DC MMBZ33VAL Applicant: Motorola Inc. FCC ID: ABZ99FT4047 VR696 4813830A75 ESD Protection DC MMBZ20VAL VR697 4813830A75 ESD Protection DC MMBZ20VAL VR698 4813830A75 ESD Protection DC MMBZ20VAL VR699 4813830A75 ESD Protection DC MMBZ20VAL Y201 4880114R06 16.8MHz Crystal 16.8MHz 114R06 Y300 9186145B02 Ceramic Discriminator 455kHz CDBCA455CX36 Exhibit 10B – List of Recommended Test Equipment for Servicing Instrument Recommended Type Application RF Signal Generator HP 8656B or equivalent Receiver Measurements Modulation Analyzer HP 8901B or equivalent Frequency and Deviation Measurements Audio Analyzer HP 8903A or equivalent Receiver Measurements Power Meter HP 438A or equivalent Transmitter Power Measurements Power Sensor HP 8428A or equivalent Transmitter Output Power DC Power Supply 0-20 volts at 15 amps Attenuator Pad 75 Watts, 30 dB Transmitter Measurements DC Ammeter 30mA to 20 A Current Drain Measurements Computer IBM PC, PC/XT, or PC/AT Radio Alignment Radio Interface Box RLN4008E Computer Interface to Radio Cable 3080369B72 From RIB to Computer Cable AAPMKN4004 From RIB to Radio Software RVN4191 Radio Alignment EXHIBIT 1…

Text truncated - open the document above for the full version.

Applicant: Motorola Inc. FCC ID: ABZ99FT4047 EXHIBIT 11A SHEET 1 OF 1 RF EXPOSURE INFORMATION (CONFIDENTIALITY REQUESTED) PURSUANT 47 CFR 2.1091 In accordance with 47 CFR 2.1091(c) this transmitter has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1091(d) for mobile devices, using measurements per methods stated in 47 CFR 2.1091(d)(1).

Certificate Number: 1449-02 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 MPE Compliance Test Report Date of Report: September 19, 2003 Report Revision(s): Rev. O Device Manufacturer: Motorola Device Description: 25W 32 channel Mobile Radio 403-440 MHz Classification: Occupational/Controlled Exposure FCC ID: ABZ99FT4047 Device Model: PMUE2003A Test Period: 9/5/03 Test Engineer: Jim Fortier (Elect. Principle Staff Engineer) Au…

Text truncated - open the document above for the full version.