ABZ99FT4063GM3688 UHF 25W Mobile Radio

GM3688User Guide COMPUTER SOFTWARE COPYRIGHTSThe Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse engineered, or distributed in - any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non exclusive license to use that arises by - operation of law in the sale of a product. English.book Page 1 Friday, November 7, 2003 12:41 PM priority Menu Navigation D on/off Scan List (p. 27) Phone List (p. 33) add/delete entry Selective Call Call Alert Alert Keypad Escalert add/delete/ edit/edit code entry on/off select/enter ID G H G H G H G H select/enter ID repeater mode/ talkarnd mode G H G H G H on/off on/off standard/alert #1 - #6 To ne Tag Squelch normal/ tight Power Level high/low Option Board Backlight Intensity high/med/low D to enter menu mode G or H to scroll through the list D to select menu item C to return to previous menu level — or — Hold down C to exit menu mode G or H to scroll through sub list - D to select sub menu item - Phone (p. 30) Program Lists System Scan (p. 24) Utility (p. 41) Rptr/ Talkarnd (p. 17) Menu Navigation Chart(Refer to Menu Navigation guidelines—lower, left hand corner of this page) - Software Ver# on/off Radio Call Tones (p. 37) G H Edit PL/ DPL Codes (p. 19) Rx/Tx English.book Page 1 Friday, November 7, 2003 12:41 PM 1 English CONTENTS CONTENTS Computer Software Copyrights . . . . . . . . . . . 1Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Product Safety and RFExposure Compliance . . . . . . . . . . . . . . . . . . 3Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4Conventional Radio Systems . . . . . . . . . . . . 4GM3688 Radio Features. . . . . . . . . . . . . . . . 4 Radio Wide Features . . . . . . . . . . . . . . . . 4Signaling Features . . . . . . . . . . . . . . . . . . 4 Radio Overview . . . . . . . . . . . . . . . . . . . . . . 5LED Indicators. . . . . . . . . . . . . . . . . . . . . . . . 6Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Optional Enhanced Keypad Microphone (RMN5029) . . . . . . . . . . . . . . . . . . . . . . . . . . 7Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . 9Programmable Buttons . . . . . . . . . . . . . . . . 10Menu Buttons . . . . . . . . . . . . . . . . . . . . . . . 14 Menu Button. . . . . . . . . . . . . . . . . . . . . . 14Menu Scroll Buttons . . . . . . . . . . . . . . . . 14Navigate the Menu . . . . . . . . . . . . . . . . . 14 Exit the Menu . . . . . . . . . . . . . . . . . . . . . . . 14 Getting Started . . . . . . . . . . . . . . . . . . . . . . 15Turn the Radio On or Off . . . . . . . . . . . . . . . 15Adjust the Volume . . . . . . . . . . . . . . . . . . . . 15Select a Radio Channel . . . . . . . . . . . . . . . . 15Receive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Silent Monitor . . . . . . . . . . . . . . . . . . . . . 16Open Squelch Monitor. . . . . . . . . . . . . . . 16 Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Repeater or Talkaround J Mode . . . . . . . . 17 Home Revert Memory Channel (1 & 2) . . . . 18Store Memory Channel (1 & 2). . . . . . . . . . . 18Set Local or Distance Mode . . . . . . . . . . . . . 18VOX Operation . . . . . . . . . . . . . . . . . . . . . . . 18Program PL/DPL Codes . . . . . . . . . . . . . . . . 19Radio Calls . . . . . . . . . . . . . . . . . . . . . . . . . 20Selective Radio Inhibit . . . . . . . . . . . . . . . . . 20Receive a Selective Call. . . . . . . . . . . . . . . . 20Send a Selective Call . . . . . . . . . . . . . . . . . . 20Receive a Call Alert™ Page . . . . . . . . . . . . . 21Send a Call Alert Page . . . . . . . . . . . . . . . . . 21Repeater Access . . . . . . . . . . . . . . . . . . . . . 22Emergency Alerts . . . . . . . . . . . . . . . . . . . . . 22Send an Emergency Alert. . . . . . . . . . . . . . . 23Clear an Emergency Alert . . . . . . . . . . . . . . 23 English.book Page 1 Friday, November 7, 2003 12:41 PM 2 English CONTENTS Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Talkback . . . . . . . . . . . . . . . . . . . . . . . . . . . .24Start System Scan . . . . . . . . . . . . . . . . . . . .24Stop System Scan . . . . . . . . . . . . . . . . . . . .25Start Auto Scan . . . . . . . . . . . . . . . . . . . . . .25Stop Auto Scan. . . . . . . . . . . . . . . . . . . . . . .26Delete a Nuisance Channel . . . . . . . . . . . . .26 Restore Channels to the Scan List . . . . .26 Edit a Scan List. . . . . . . . . . . . . . . . . . . . . . .27Add or Delete Channels in a Scan sList . . . .27Prioritize a Channel in a Scan List . . . . . . . .28Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Receive a Phone Call . . . . . . . . . . . . . . . . . .30Make a Phone Call . . . . . . . . . . . . . . . . . . . .31Edit the Phone List . . . . . . . . . . . . . . . . . . . .33 Add an Entry . . . . . . . . . . . . . . . . . . . . . .33Delete an Entry . . . . . . . . . . . . . . . . . . . .34Edit an Entry . . . . . . . . . . . . . . . . . . . . . .35Edit Access/Deaccess Codes . . . . . . . . .36 Tone Preferences . . . . . . . . . . . . . . . . . . . .37Tones On/Off . . . . . . . . . . . . . . . . . . . . . . . .39Keypad On/Off Tones . . . . . .…

Text truncated - open the document above for the full version.

Radius CM200 ™ /CM300 ™ & PM400 ™ Commercial SeriesTwo-Way Radio Installation Guide MOTOROLA, the Stylized M Logo, and Radius are registered in the US Patent & Trademark Office.All other product or service names are the property of their respective owners. © 2002, 2003 Motorola, Inc. All rights reserved. Printed in U.S.A. *6802966C25*68P02966C25-A i Table of Contents Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards ............ iii Information for Vehicles with Electronic Anti-Lock/Anti-Skid Brakes .......................................iv Installation Warnings .............................................................................................iv Installation Precautions ..........................................................................................iv Braking System Tests ............................................................................................iv Chapter 1Introduction 1.1 General Information ............................................................................................... 1 1.2 Plan the Installation ............................................................................................... 1 Chapter 2DC Power Cable Installation 2.1 Planning the Power Cable Installation ................................................................... 2 2.2 Power Cable Installation Procedure ...................................................................... 2 Chapter 3Trunnion Installation 3.1 Planning the Mounting Trunnion Installation .......................................................... 5 3.2 Trunnion Installation Procedure ............................................................................. 5 Chapter 4Antenna Installation 4.1 Antenna Installation and Compliance with Radio Frequncy (RF) Energy Safety Standards................................................................................ 8 4.2 Selecting an Antenna Site/Location on a Metal Body Vehicle ................................ 8 4.3 Antenna Installation Procedure .............................................................................. 9 4.4 Completing the Installation .................................................................................... 9 Chapter 5Installation Options 5.1 Mobile Dashboard Mounting ................................................................................ 10 5.1.1Installing the Mounting Frame into the Dashboard ................................. 10 ii 5.1.2Inserting the Radio into the Mounting Frame (Figure 5.1)...................... 10 5.1.3Removing the Radio from the Mounting Frame ..................................... 11 5.2 External Speaker Installation ...............................................................................11 5.3 Visor Microphone Installation ...............................................................................12 5.3.1Connecting to the Mobile Radio ............................................................. 12 Chapter 6Accessory Connections 6.1 Accessory Connector Pin Functions ....................................................................13 6.2 Connection Plan for Accessories .........................................................................15 Chapter 7Noise Sources 7.1 Introduction ..........................................................................................................16 7.2 Radiated Noise .....................................................................................................16 7.3 Conducted Noise ..................................................................................................17 7.4 Induced Noise ......................................................................................................17 Chapter 8Operation of a Conventional Ignition System 8.1 Introduction ..........................................................................................................18 8.2 Sources of Ignition Interference ...........................................................................18 Chapter 9Detection of Noise Sources 9.1 Noise Detection Procedure ..................................................................................20 9.2 Sources of Noise ..................................................................................................21 Chapter 10Noise Reduction Techniques 10.1 General ................................................................................................................22 10.2 Ignition System Interference ................................................................................22 10.2.1 Engine Maintenance and Tune-Up......................................................... 22 10.2.2 Available Noise Reduction Kits .............................................................. 22 10.2.3 Ignition Coil Interference ........................................................................ 23 10.2.4 Distributor Interference ........................................................................... 23 10.2.5 Battery Connections ............................................................................... 23 10.3 Alternator ..............................................................................................................24 10.4 Voltage Regulator Noise ......................................................................................25 10.5 Hood and Trunk Lid Noise ...................................................................................25 10.6 Other Electrical Noises .........................................................................................25 10.7 Ground Bonding ...................................................................................................26 Safety-iii INSTALLATION REQUIREMENTS FOR COMPLIANCE WITH RADIO FREQUENCY (RF) ENERGY EXPOSURE SAFETY STANDARDS ATTENTION! This radio is intended for use in occupational/controlled conditions, where users have full knowledge of th…

Text truncated - open the document above for the full version.

Applicant: Motorola Inc. FCC ID: ABZ99FT4063 Certification of Data Pursuant to 47 CFR 2.907 The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications: 1) I received a BEng (H) degree from the University of Northumbria at Newcastle, Newcastle, UK. 2) I have 6 years experience in developing, testing, and certifying Land Mobile Communications Products. NAME: Solomon A. Lorthu SIGNATURE: /s/ Solomon Arulanandam DATE: January 22, 2004 POSITION: Engineering Section Manager II I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. NAME: Kok Gee Siong SIGNATURE: /s/ Kok Gee Siong DATE: January 22, 2004 POSITION: Engineering Manager EXHIBIT 2 SHEET 1 OF 1

Applicant: Motorola Inc FCC ID: ABZ99FT4063 Table of Contents Exhibit 1. Identification Label -- 47 CFR. 2.925, 2.1065 & 2.1033(c) (11) 1-1 Exhibit 1A. General Information 1-1 1A.1. Application References 1-1 1A.2. Data Submittal Procedure 1-2 EXHIBIT 2. Statement of Certification -- 47 CFR. 2.907 2-1 EXHIBIT 3. EXTERNAL PHOTOGRAPHS -- PURSUANT 47 CFR 2.1033 (c )12 3-1 EXHIBIT 4. Circuit Description---47 CFR. 2.1033(c)10 4-1 4A. Carrier Frequency Generation and Stabilization 4-1 4B. Means for Limiting Modulation 4-1 4C. Means of Attenuation of Higher Audio Frequencies 4-1 4D. Means for Attenuation of Spurious Emissions 4-1 4E. Means for Limiting Output Power 4-1 4F. Modulation Techniques 4-2 4G. Means for Controlling Transient Frequency Behavior 4-2 4H. Block Diagrams 4-3 EXHIBIT 5. Circuit Diagrams-- PURSUANT 47 CFR 2.1033(c)10 5-1 EXHIBIT 6. Measured Data--47 CFR. 2.1041 & 2.1033 (C) (14) 6-1 6A. RF Power -- Pursuant 47 CFR 2.1046(a) & 2.1033(c)8 6-3 6B. Transmit Audio Frequency Response-- Pursuant to 47 CFR 2.1047(a) 6-4 6C. Transmit Audio Post Limiter Low Pass Filter Response-- Pursuant to 47 CFR 2.1047(a) 6-5 6D. Modulation Characteristics Data -- Pursuant 47 CFR 2.1047 (d) 6-6 6E. Occupied Bandwidth Data -- Pursuant 47 CFR 2.1049(i), 90.210(b) (d) 6-9 6F. Conducted Spurious Emissions Data-- Pursuant 47 CFR 2.1051, 2.1057 6-18 6G. Radiated Spurious Emissions Data -- Pursuant 47 CFR 2.1053, 2.1057 6-24 6H. Frequency Stability Data -- Pursuant 47 CFR 2.1055(a)(d) 6-32 6I. Transient Frequency Behavior -- Pursuant to 47 CFR 90.214 6-33 EXHIBIT 7. Measurement Procedures--47 CFR. 2.947 7-1 7A. RF Power -- Pursuant to 47 CFR 2.1046 7-1 7B. Transmit Audio Frequency Response-- Pursuant to 47 CFR 2.1047(a) 7-1 7C. Transmit Audio Post Limiter Low Pass Filter Response-- Pursuant to 47 CFR 2.1047(a) 7-1 7D. Modulation Characteristics Data -- Pursuant 47 CFR 2.1047 (d) 7-1 7E. Occupied Bandwidth -- Pursuant to 47 CFR 2.1049(c)(i) 7-1 7F. Conducted Spurious Emissions--Pursuant to 47 CFR 2.1051 7-2 7G. Radiated Spurious Emissions -- Pursuant to 47 CFR 2.1053 7-2 7H. Frequency Stability -- Pursuant to 47 CFR 2.1055(a)(d) 7-3 7I. Transient Frequency Behavior -- Pursuant to 47 CFR 90.214 and TIA 603 Section 2.2.19 7-3 7J. Measurement Equipment List -- Pursuant to 47 CFR 2.947(d) 7-4 EXHIBIT 8. User & Product Safety INSTRUCTION Manual-- PURSUANT 47 CFR 2.1033(c) & 2.1093 8-1 EXHIBIT 9. INTERNAL PHOTOGRAPHS-- PURSUANT 47 CFR 2.1033(c)12 9-1 EXHIBIT 10. SEMICONDUCTOR/ACTIVE DEVICE LIST AND TUNE UP PROCEDURE 10-1 10A. Semiconductor / Active Device List -- 47 CFR 2.1033(c)(10) 10-2 10B. List of Recommended Test Equipment for Servicing -- 47 CFR 2.1033(c)(10) 10-4 10C. Tune Up Procedure -- 47 CFR 2.1033-(c)(9) 10-5 EXHIBIT 0 Applicant: Motorola Inc FCC ID: ABZ99FT4063 EXHIBIT 0 EXHIBIT 11. RF EXPOSURE INFORMATION-- PURSUANT 47 CFR 2.1091 11-1 EXHIBIT 12. Transmitter Description -- 47 CFR. 2.1033(c) 12-1 12A. Transmitter Technical Characteristics -- Pursuant 47 CFR 2.1033(c)4, 5, 6, 7 12-1 12B. Transmitter Application 12-2 EXHIBIT 13. COVER LETTER -- 47 CFR. 2.1033(c)1,2 13-1

FCC ID: ABZ99FT4063 REQUEST FOR CONFIDENTIALITY Date: January 22, 2004 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4063 Dear Sir / Madam, Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected] EXHIBIT 13B SHEET 1 OF 1

FCC ID: ABZ99FT4063 Date: January 22, 2004 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4063 Dear Sir / Madam, Motorola Inc., 1309 E. Algonquin, Schaumburg, Illinois, US herein submits application for Certification of the equipment identified by FCC ID number ABZ99FT4063. This transmitter is primarily intended for use in a mobile radio enviroment with capabilities for conventional communications with a conducted transmit power which is adjustable from 1 Watt to 28 Watts. The subject transmitter complies with CFR Title 47, Section 90.203, in that the operator cannot directly program the transmit frequencies using only the normally accessible external controls of the unit. Enclosed is a complete Certification Application. Please contact me if you require any additional information. Sincerely, Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected] EXHIBIT 13A SHEET 1 OF 1

Applicant: Motorola Inc. FCC ID: ABZ99FT4063 External Photographs Pursuant to 47 CFR 2.1033(c) 12 Figure 3-1: Front and side views of complete radio. Figure 3-2: Front view of complete radio. EXHIBIT 3 SHEET 1 OF 4 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 Figure 3-3: Rear view of complete radio showing antenna connector, DC cable, and accessory connector. FCC Label Location Figure 3-4: Rear view of complete radio showing FCC Label location. EXHIBIT 3 SHEET 2 OF 4 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 RF Safety Label Figure 3-5: RF Safety Label Location attached at Microphone cord. Figure 3-6: Close-Up of RF Safety Label EXHIBIT 3 SHEET 3 OF 4 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 EXHIBIT 3 SHEET 4 OF 4 Figure 3-7: Antenna connector options, BNC on left, mini-UHF on right.

Applicant: Motorola Inc. FCC ID: ABZ99FT4063 IDENTIFICATION LABEL Pursuant to 47 CFR 2.925(a), 2.1033(c), 2.0165 LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the bottom of the unit near the front. Shown below is a photo of the actual label affixed to the cast chassis of the transmitter. TYPE The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/inch. EXHIBIT 1A – GENERAL INFORMATION 1. Application References: TIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Sec. 2.1033-2.1057, Part 22, Part 74 and Part 90, Section 90.210. EXHIBIT 1 SHEET 1 OF 2 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 EXHIBIT 1 SHEET 2 OF 2 2. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commission’s rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Part 22, 74 and 90. Maximum transmitter power shall not be adjustable by the user.

Applicant: Motorola Inc. FCC ID: ABZ99FT4063 Internal Photographs Pursuant to 47 CFR 2.1033(c)12 Figure 9-1: Top Side of PCB with shields. EXHIBIT 9 SHEET 1 OF 5 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 Figure 9-2: Bottom Side of PCB with shields. EXHIBIT 9 SHEET 2 OF 5 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 Figure 9-3: Top View of PCB placed in chassis. EXHIBIT 9 SHEET 3 OF 5 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 Figure 9-4: Top View of PCB placed in chassis with shield covering transmitter section. EXHIBIT 9 SHEET 4 OF 5 Applicant: Motorola Inc. FCC ID: ABZ99FT4063 EXHIBIT 9 SHEET 5 OF 5 Figure 9-5: Top view of chassis with main shield in place.

English Product Safety and RF Energy Exposure Booklet for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site Control Stations ATTENTION! The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. © Motorola, Inc. 2003 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 Printed in U.S.A. 8/03. *6881095C99* 68P81095C99-A 2 English RF Energy Exposure Awareness and Control Information, and Operational Instructions for FCC Occupational Use Requirements NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola 2-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of 2-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 3 English Please refer to the following Web sites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits. http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for mobile 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. Your Motorola 2-way radio has a RF exposure product label. Also, your Motorola user manual, or separate safety booklet, includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standard Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio antenna radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2003 • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular, and PCS product certification.” RF Exposure Compliance and Control Guidelines and Operating Instructions To control exposure to yourself and others and to ensure compliance with the RF exposure limits, always adhere to the following procedures. Guidelines: • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met. Instructions: •Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio 5 English generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). •Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away, as shown in Table 1, from the body of a vehicle with a properly installed antenna. This separation distance will ensure that there is sufficient distance f…

Text truncated - open the document above for the full version.

Form-MPE Vehicle rpt. Rev 2.00 Page 1 of 22 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 MPE Compliance Test Report Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with all applicable national and international reference standards and guidelines. Signature on File 1/20/04 Ken Enger Date Approved Senior Resource Manager, Laboratory Director, CGISS EME Lab Phone: 954-723-6299 Fax: 954-723-3803 Note: This report shall not be reproduced in part without written approval from an authorized representative of the Motorola CGISS EME Laboratory. Certificate Number: 1449-02 Date of Report: January 16, 2004 Report Revision(s): Rev. O Device Manufacturer: Motorola Device Description: 25W 4 channel Mobile Radio 465-495 MHz Classification: Occupational/Controlled Exposure FCC ID: ABZ99FT4063 Device Model: PMUE2148A Test Period: 1/14/04 Test Engineer: Jim Fortier (Elect. Principle Staff Engineer) Kim Uong (Lead EME Engineer) Author: Michael Sailsman (Global EME Regulatory Affairs Liaison) Form-MPE Vehicle rpt. Rev 2.00 Page 2 of 22 TABLE OF CONTENTS 1.0 Product Description 2.0 Offered Options and Accessories 3.0 Measurement Standards 4.0 Data Collection Consideration 5.0 Measurement System Uncertainty Levels 6.0 Method of Measurement 6.1 EME measurements made on trunk mounted antennas 6.1.1 External vehicle EME measurement 6.1.2 Internal vehicle EME measurement 6.2 EME Measurements made on center roof mounted antennas 6.2.1 External vehicle EME measurements 6.2.2 Internal vehicle EME measurement 7.0 Test Site 8.0 Measurement System/Equipment 9.0 Test Unit Description 10.0 Test Set-Up Description 11.0 Test Results Table 1 465.0125 MHz external E-field assessment at the trunk w/ antenna model HAE4003A Table 2 465.0125 MHz internal E-field assessment at the trunk w/ antenna model HAE4003A Table 3 465.0125 MHz external E-field assessment at the trunk w/ antenna model HAE4011A Table 4 465.0125 MHz internal E-field assessment at the trunk w/ antenna model HAE4011A Table 5 470.0125 MHz external E-field assessment at the trunk w/ antenna model HAE4004A Table 6 470.0125 MHz internal E-field assessment at the trunk w/ antenna model HAE4004A Table 7 470.0125 MHz external E-field assessment at the trunk w/ antenna model HAE4012A Table 8 470.0125 MHz internal E-field assessment at the trunk w/ antenna model HAE4012A Table 9 480.0125 MHz external E-field assessment at the trunk w/ antenna model HAE4004A Table 10 480.0125 MHz internal E-field assessment at the trunk w/ antenna model HAE4004A Table 11 480.0125 MHz external E-field assessment at the trunk w/ antenna model HAE4012A Form-MPE Vehicle rpt. Rev 2.00 Page 3 of 22 Table 12 480.0125 MHz internal E-field assessment at the trunk w/ antenna model HAE4012A Table 13 494.9875 MHz external E-field assessment at the trunk w/ antenna model HAE4004A Table 14 494.9875 MHz internal E-field assessment at the trunk w/ antenna model HAE4004A Table 15 494.9875 MHz external E-field assessment at the trunk w/ antenna model HAE4012A Table 16 494.9875 MHz internal E-field assessment at the trunk w/ antenna model HAE4012…

Text truncated - open the document above for the full version.