ABZ99FT4081MOTOTRBO UHF 25W Radio

XPR 4500 / XPR 4550 Mobile Radio User’s Guide 6816817H01 MOTOROLA, the Stylized Logo and CommPort are registered in the U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006. All Rights Reserved. ii XPR 4500 / XPR 4550 Mobile Radioi Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C99) to ensure compliance with RF energy exposure limits. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Documentation Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others. MOTOROLA and the Stylized M Logo are registered in the U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006. Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. !
 iv Notations Used in This Manual Throughout the text in this publication, you will notice the use of WARNINGS, CAUTIONS, and Notes. These notations are used to emphasize that safety hazards exist, and care that must be taken or observed. The following special notations identify certain items: WARNING: An operational procedure, practice, or other condition, which might result in injury or death if not carefully observed. CAUTION: An operational procedure, practice, or other condition, which might result in damage to the equipment if not carefully observed. Note:Note: An operational procedure, practice, or other condition, which is essential to emphasize. ExampleDescription Light button or > Buttons and keys are shown in bold print or as a key symbol. PHONE Menu items (softkeys) are similar to the way they appear on the radio’s display. WARNING ! CAUTION ! Contents Declaration of Conformity .................................................................. ii Computer Software Copyrights .........................................................iii Documentation Copyrights ................................................................iii Disclaimer .........................................................................................iii Notations Used in This Manual ........................................................ iv Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using Your Radio: The Basics .......................................................... 1 Getting Started .................................................................................. 2 Identifying Your Radio ....................................................................... 3 Control Head .............................................................................. 3 Operating Your Control Head ............................................................ 3 Turning On the Radio ........................................................................ 4 Setting the Volume ..................................................................... 5 Adjusting the Display Brightness ................................................ 5 Using the navigation key ............................................................ 5 Trunked Modes or Conventional Channels ................................ 6 Field Programming ..................................................................... 6 Display Status ................................................................................... 7 Feature Control ................................................................................. 7 Alert Tones ........................................................................................ 7 Basic Operating Procedures . . . . . . . . . . . . . . . . . . . 11 Basic Functions ............................................................................... 11 Selecting the Zone or Mode ............................................................ 12 Selecting or Changing the Zone ..........................................…

Text truncated - open the document above for the full version.

English Product Safety and RF Energy Exposure Booklet for Mobile Two-Way Radios Installed in Vehicles or as Fixed Site Control Stations ATTENTION! The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. © Motorola, Inc. 2005 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 *6881095C99* 68P81095C99-E 2 English RF Energy Exposure Awareness and Control Information, and Operational Instructions for FCC Occupational Use Requirements NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola 2-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of 2-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 3 English Please refer to the following Web sites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits. http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for mobile 2-way radios before they can be marketed in the U.S. When 2-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. Your Motorola 2-way radio has a RF exposure product label. Also, your Motorola user manual, or separate safety booklet, includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standard Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environment at duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio antenna radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2003 • ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2001) “additional requirements for SMR, cellular, and PCS product certification.” RF Exposure Compliance and Control Guidelines and Operating Instructions To control exposure to yourself and others and to ensure compliance with the RF exposure limits, always adhere to the following procedures. Guidelines: • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met. Instructions: •Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button or, for radios equipped with VOX, speak into the microphone. The red LED will illuminate when the radio is 5 English transmitting. To receive calls, release the PTT button, or, for radios equipped with VOX, stop talking. The red LED will extinguish when the radio stops transmitting. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance). •Transmit only when people outside the vehicle are at l…

Text truncated - open the document above for the full version.

EXHIBIT 13A SHEET 1 OF 1 FCC ID: ABZ99FT4081 Date: July 13, 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4081 Dear Sir or Madam: Motorola Inc., 1313 East Algonquin Road, Schaumburg, Illinois, herein submits application for Certification of the equipment identified by FCC ID number ABZ99FT4081. This transmitter is primarily intended for use in a mobile radio application with capabilities for conventional and 2 to 1 TDMA digital communications with a conducted transmit power which is adjustable from 1 Watt (+30.00 dBm) to 30 Watts (+44.77 dBm). There are two models using the same transmitter – one with a GPS receiver and one without a GPS receiver. The transmitter is exactly the same between the two types. On the non-GPS model, the GPS receiver circuitry is removed. The subject transmitter complies with CFR Title 47, Section 90.203, in that the operator cannot directly program the transmit frequencies using only the normally accessible external controls of the unit. Enclosed is a complete Certification Application. Please contact me if you require any additional information. Sincerely, /s/ Donna Tokarz (signed) Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected]

FCC ID: ABZ99FT4081 REQUEST FOR CONFIDENTIALITY Date: July 20, 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4081 Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. In Addition, Motorola is also requesting that the FCC mark Exhibit 3(External Photos) and exhibit 9 (Internal photos), as Temporary or Short-Term Confidentiality as outline in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” and Exhibits 3 and 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/Donna Tokarz (signed) Donna Tokarz NPR Coordinator Tel: (847) 576-7245 Fax: (847) 538-4312 E-mail: [email protected] EXHIBIT 13B SHEET 1 OF 1

MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 1 OF 5 GENERAL VIEW, 256 CHANNEL MODEL WITH MICROPHONE (CLOSE-UP OF RF EXPOSURE LABEL ON FOLLOWING PAGE) MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 2 OF 5 RF EXPOSURE LABEL (CLOSE-UP VIEW) MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 3 OF 5 FRONT VIEW, 256 CHANNEL MODEL FRONT VIEW, 32 CHANNEL MODEL MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 4 OF 5 BOTTOM VIEW, SHOWING FCC ID LABEL (CLOSE-UP OF FCC ID LABEL ON FOLLOWING PAGE) MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 5 OF 5 CLOSE-UP VIEW OF FCC ID LABEL

MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 1 SHEET 1 OF 2 LIST OF EXHIBITS DESCRIPTION EXHIBIT REFERENCE I. Identification Label Information 1 2.1033-(c) 11 & General Information 1A 1. Production Plans 2.1033-(c) 2. Application References 2.1061 3. Data Submittal Procedure II. Certification of Data 2 2.1517-(g) III. External Photographs 3 2.1033-(c) 12 IV. Circuit Descriptions 4 V. Schematic Diagrams 5 2.1033-(c) 10 VI. Test Report 1. Data Index 6 2. RF Output Data 6A 2.1046 3. Modulation Characteristics A. Audio Response & Low Pass Filter Response 6B, 6C 2.1047-(a) B. Modulation Limiting 6D 2.1047-(b) 4. Occupied Bandwidth 6E 2.1049 5. Conducted Spurious Emissions 6F 2.1051 6. Radiated Spurious Emissions 6G 2.1053 7. Frequency Stability A. Frequency Stability vs. Temperature 6H-1 2.1055 B. Frequency Stability vs. Supply Voltage 6H-2 2.1055 8. Transient Frequency Behavior 6I 90.214 VII. Test Set-up Procedures 7 2.1041 VIII. Instruction Manuals 8 2.1033-(c) 3 IX. Internal Photographs 9 2.1033-(c) 11, 12 X. Parts List and Tune-up Procedures 10 2.1033-(c) 9, 10 XI. RF Exposure Information 11 2.1091 XII. Operational Description 12 2.1033-(c) 4, 5 1. Technical Characteristics 2. Application XIII. Cover Letter 13 MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 1 SHEET 2 OF 2 IDENTIFICATION LABEL Pursuant to 47 CFR 2.1033(c) LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the bottom of the unit near the front. Shown below is a photo of the actual label affixed to the cast chassis of the transmitter. TYPE The label is a paper polyester film laminated with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with a minimum peel strength of 40 oz/inch. MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 1A SHEET 1 OF 1 EXHIBIT 1A – GENERAL INFORMATION 1. Production Plans – Pursuant 2.1033 (c) Quantity production is planned. 2. Application References: TIA/EIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Sec. 2.1033-2.1057, and Part 90 Sec. 90.210. 3. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commissions’ rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47, Part 90. Maximum transmitter power shall not be adjustable by the user.

MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 1 OF 4 TOP VIEW OF GPS MODEL WITH CHASSIS TOP COVER REMOVED (MATING SURFACES OF TOP COVER AND CIRCUIT BOARD IN CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 2 OF 4 TOP VIEW OF NON-GPS MODEL WITH CHASSIS TOP COVER REMOVED (MATING SURFACES OF TOP COVER AND CIRCUIT BOARD IN CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 3 OF 4 TOP VIEW OF GPS MODEL WITH CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN) MOTOROLA INC FCC ID: ABZ99FT4081 EXHIBIT 3 SHEET 4 OF 4 TOP VIEW OF NON-GPS MODEL WITH CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN)

MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 11A SHEET 1 OF 1 RF EXPOSURE INFORMATION Pursuant 47 CFR 2.1091 In accordance with 47 CFR 2.1091(c) this transmitter has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1091(d) for mobile devices, using measurements per methods stated in 47 CFR 2.1091(d)(1). The complete S.A.R. EME Compliance Test Report is attached as Exhibit 11B.

FCC ID: ABZ99FT4081 SR4052 Form-MPE Vehicle rpt. Rev 3.00 Page 1 of 20 Certificate Number: 1449-01 FCC ID: ABZ99FT4081 DECLARATION OF COMPLIANCE MPE ASSESSMENT Government & Enterprise Mobility Solutions EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: May 22, 2006 Report Revision: Rev. O Report ID: FCC MPE rpt_PMUE2342A_UHF R1_ Rev O_060522_SR24052 Responsible Engineer: Kim Uong (EME Engineer) Date/s Tested: 5/12/06 - 5/15/06 Manufacturer/Location: Motorola, Penang Date submitted for test: 5/2/06 DUT Description: UHF Range 1, 403-470 MHz, 1-25W Test TX mode(s): CW Max. Power output: 30W, 50% Duty cycle TX Frequency Bands: 403-470 MHz Signaling type: CW using FM and 2:1 TDMA using 4FSK Model(s) Tested: PMUE2342A Model(s) Certified: PMUE2342A Serial Number(s): MB5EM08U Classification: Occupational Controlled (Operator); General Population/Uncontrolled (Passengers/Bystanders) Rule Part(s): 2.1091 Approved Accessories: Antenna(s): HAE4002A (403-430 MHz, 1/4 Wave, 0 dBd gain); HAE4003A (450-470 MHz, 1/4 Wave, 0 dBd gain); HAE4010A (406-420 MHz, 5/8 Wave, 3.5 dBd gain), HAE4011A (450-470 MHz, 5/8 Wave, 3.5 dBd gain), RAE4004ARB (445-470 MHz, 5/8 Wave, 5 dBd gain). Final RF Exposure Results: Mobile max calculated power density = 0.27mW/cm 2 Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 3.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. Signature on file -Stephen Whalen for Ken Enger Ken Enger - GEMS EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 5/22/06 Certification Date: 5/22/06 Certification No.: L1060521P FCC ID: ABZ99FT4081 SR4052 Form-MPE Vehicle rpt. Rev 3.00 Page 2 of 20 TABLE OF CONTENTS 1.0 Product and System Description 2.0 Additional Options and Accessories 3.0 Measurement and Limit Standards 4.0 Data Collection Consideration 5.0 Measurement System Uncertainty Levels 6.0 Method of Measurement 6.1 EME measurements made with trunk mounted antenna 6.1.1 External vehicle EME measurement 6.1.2 Internal vehicle EME measurement 6.2 EME measurements made with roof mounted antenna 6.2.1 External vehicle EME measurements 6.2.2 Internal vehicle EME measurement 7.0 Test Site 8.0 Measurement System/Equipment 9.0 Test Unit Description 10.0 Test Set-Up Description 11.0 Test Results Summary APPENDIX A: Illustration of antenna location and test distances APPENDIX B: Meter/Probe Calibration Certificates APPENDIX C: Photos of Assessed Antennas APPENDIX D: Detail MPE Measurement Data REVISION HISTORY Date Revision Comments 5/22/06 O Original release FCC ID: ABZ99FT4081 SR4052 Form-MPE Vehicle rpt. Rev 3.00 Page 3 of 20 1.0 Product and System Description FCC ID: ABZ99FT4081, model PMUE2342A is a mobile transceiver that utilizes both analog and digital two-way radio communications and also includes GPS capability. The modulation scheme used for analog is narrowband Frequency Modulation (FM). The modulation scheme used for digital is 4 Level Frequency Shift Keying (4FSK) and Time Division Multiple Access (TDMA). TDMA is used to allocate portions of the RF signal by dividing time into two slots. Transmission from a unit or base station is accommodated in time-slot lengths of 30 milliseconds and frame lengths of 60 milliseconds. The intended use of the radio is Push-To-Talk (PTT) while the device is properly installed in a vehicle with an external antenna mounted at the center of the roof or trunk. This device will be marketed to and used by employees solely for work-related operations, such as public safety agencies, e.g. police, fire and emergency medical. User training is the responsibility of these agencies which can be expected to employ the usage instructions, safety information and operational cautions set forth in the user's manual, instructional sessions or other means. Accordingly this product is classified as Occupational/Controlled Exposure. However, In accordance with FCC requirements, the passengers inside the vehicle and the bystanders external to the vehicle are evaluated to the General Population/Uncontrolled Exposure Limits. (Note that “By-standers” as used herein mean people other than operator) 2.0 Additional Options and Accessories NA 3.0 Measurement and Limit Standards Measurements were performed according to the recommended guidelines in IEEE/ANSI C95.3-2002 and compared to FCC Limits Per 47 CFR 2.1091 (d) for General Population/Uncontrolled RF Exposure. For test frequencies ranging from 403 - 470 MHz the MPE (Maximum Permissible Exposure) limit to electromagnetic energy in equivalent plane wave free-space power density is 0.27 – 0.31 mW/cm 2 and calculated using the formula f/1500. 4.0 Data Collection Consideration Power density testing was performed with DUT installed in a 1991 Ford Taurus (4-door). Measurement data was taken with the vehicle running at idle and the vehicle battery measuring 14.0 volts. FCC ID: ABZ99FT4081 SR4052 Form-MPE Vehicle rpt. Rev 3.00 Page 4 of 20 5.0 Measurement System Uncertainty Levels The information below presents an estimate of the possible errors that are associated with the measurement system. Uncertainty Budget for Near Field Probe Measurements Tol. Prob. u i (± %) Dist. Divisor (±%) Measurement System Survey Meter Calibration 3.0 N 1.00 3.0 Repeatability Accuracy 7.0 N 1.00 7.0 Combined Standard Uncertainty RSS 7.6 Expanded Uncertainty (95% CONFIDENCE LEVEL) k=2 15 6.0 Method of Measurement 6.1 EME measurements made with trunk mounted antenna(s) (For reference, see Illustration of antenna location and test distances in APPENDIX A) 6.1.1 External vehicle EME measurement (Antenna mounted at trunk center) MPE measurements for by-stander conditions are determined by taki…

Text truncated - open the document above for the full version.

MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6 SHEET 1 OF 2 INDEX OF SUBMITTED MEASURED DATA This exhibit contains the measured data for this equipment as follows: EXHIBIT 6A - RF Power Output (Table) EXHIBIT 6B - Transmit Audio Response (2 Graphs) 6B-1 – 12.5 kHz Channel Spacing 6B-2 – 25 kHz Channel Spacing EXHIBIT 6C - Transmit Audio Post Limiter Lowpass Filter Response (Graph) EXHIBIT 6D - Modulation Limiting Characteristics (6 Graphs) 6D-1 – 12.5 kHz Carrier Squelch Mode 6D-2 – 12.5 kHz Tone Private Line (CTCSS) Mode 6D-3 – 12.5 kHz Digital Private Line (CDCSS) Mode 6D-4 – 25 kHz Carrier Squelch Mode 6D-5 – 25 kHz Tone Private Line (CTCSS) Mode 6D-6 – 25 kHz Digital Private Line (CDCSS) Mode EXHIBIT 6E - Occupied Bandwidth (20 Spectrum Analyzer Plots) 6E-1 – 12.5 kHz 2500 Hz Audio Modulation Only 6E-2 – 12.5 kHz 2500 Hz Audio and TPL (CTCSS) Modulation 6E-3 – 12.5 kHz 2500 Hz Audio and DPL (CDCSS) Modulation 6E-4 – 12.5 kHz DTMF Modulation Only 6E-5 – 12.5 kHz DTMF Modulation and TPL (CTCSS) Modulation 6E-6 – 12.5 kHz DTMF Modulation and DPL (CDCSS) Modulation 6E-7 – 12.5 kHz 2000/3000 Hz FSK Data Modulation Only 6E-8 – 12.5 kHz 2000/3000 Hz FSK Data and TPL (CTCSS) Modulation 6E-9 – 12.5 kHz 2000/3000 Hz FSK Data and DPL (CDCSS) Modulation 6E-10 – 12.5 kHz 4-Level FSK Digital Data 6E-11 – 12.5 kHz 4-Level FSK Digital Voice and Data 6E-12 – 25 kHz 2500 Hz Audio Modulation Only 6E-13 – 25 kHz 2500 Hz Audio and TPL (CTCSS) Modulation 6E-14 – 25 kHz 2500 Hz Audio and DPL (CDCSS) Modulation 6E-15 – 25 kHz DTMF Modulation Only 6E-16 – 25 kHz DTMF Modulation and TPL (CTCSS) Modulation 6E-17 – 25 kHz DTMF Modulation and DPL (CDCSS) Modulation 6E-18 – 25 kHz 2000/3000 Hz FSK Data Modulation Only 6E-19 – 25 kHz 2000/3000 Hz FSK Data and TPL (CTCSS) Modulation 6E-20 – 25 kHz 2000/3000 Hz FSK Data and DPL (CDCSS) Modulation EXHIBIT 6F - Conducted Spurious Emissions (6 Graphs) 6F-1 – 30 Watts, 403.000 MHz 6F-2 – 30 Watts, 436.000 MHz 6F-3 – 30 Watts, 470.000 MHz 6F-4 – 1 Watt, 403.000 MHz 6F-5 – 1 Watt, 436.000 MHz 6F-6 – 1 Watt, 470.000 MHz MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6 SHEET 2 OF 2 INDEX OF SUBMITTED MEASURED DATA (CONTINUED) EXHIBIT 6G – Radiated Spurious Emissions – (12 Graphs) 6G-1 – 30 Watts, 403.0125 MHz, 12.5 kHz 6G-2 – 30 Watts, 436.0125 MHz, 12.5 kHz 6G-3 – 30 Watts, 469.9750 MHz, 12.5 kHz 6G-4 – 1 Watt, 403.0125 MHz, 12.5 kHz 6G-5 – 1 Watt, 436.0125 MHz, 12.5 kHz 6G-6 – 1 Watt, 469.9750 MHz, 12.5 kHz 6G-7 – 30 Watts, 403.0125 MHz, 25 kHz 6G-8 – 30 Watts, 436.0125 MHz, 25 kHz 6G-9 – 30 Watts, 469.9750 MHz, 25 kHz 6G-10 – 1 Watt, 403.0125 MHz, 25 kHz 6G-11 – 1 Watt, 436.0125 MHz, 25 kHz 6G-12 – 1 Watt, 469.9750 MHz, 25 kHz EXHIBIT 6H – Frequency Stability (2 Graphs) 6H-1 – Frequency Stability vs. Temperature 6H-2 – Frequency Stability vs. Voltage EXHIBIT 6I- Transient Frequency Behavior (8 Graphs) 6I-1 – 30 Watts, 12.5 kHz Key-Up Attack Time 6I-2 – 30 Watts, 12.5 kHz De-Key Decay Time 6I-3 – 30 Watts, 25 kHz Key-Up Attack Time 6I-4 – 30 Watts, 25 kHz De-Key Decay Time 6I-5 – 1 Watt, 12.5 kHz Key-Up Attack Time 6I-6 – 1 Watt, 12.5 kHz De-Key Decay Time 6I-7 – 1 Watt, 25 kHz Key-Up Attack Time 6I-8 – 1 Watt, 25 kHz De-Key Decay Time MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6A RF OUTPUT DATA The RF power output was measured with the indicated voltage applied to and current into the final RF amplifying device, pursuant to 47 CFR 2.1033(c)(8) and 2.1046. HIGH POWER SETTING, FREQUENCY 403.000 MHz Measured RF Output Power: 30.0 Watts Measured DC Voltage: 13.6 Volts Measured DC Input Current: 5.87 Amperes Measured DC Input Power: 79.9 Watts LOW POWER SETTING, FREQUENCY 403.025 MHz Measured RF Output Power: 1.0 Watt Measured DC Voltage: 13.6 Volts Measured DC Input Current: 1.69 Amperes Measured DC Input Power: 23.0 Watts HIGH POWER SETTING, FREQUENCY 436.000 MHz Measured RF Output Power: 30.0 Watts Measured DC Voltage: 13.6 Volts Measured DC Input Current: 6.15 Amperes Measured DC Input Power: 83.7 Watts LOW POWER SETTING, FREQUENCY 436.025 MHz Measured RF Output Power: 1.0 Watt Measured DC Voltage: 13.6 Volts Measured DC Input Current: 1.76 Amperes Measured DC Input Power: 24.0 Watts HIGH POWER SETTING, FREQUENCY 470.000 MHz Measured RF Output Power: 30.0 Watts Measured DC Voltage: 13.6 Volts Measured DC Input Current: 6.63 Amperes Measured DC Input Power: 90.2 Watts LOW POWER SETTING, FREQUENCY 469.975 MHz Measured RF Output Power: 1.0 Watt Measured DC Voltage: 13.6 Volts Measured DC Input Current: 1.79 Amperes Measured DC Input Power: 24.4 Watts MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6B-1 TRANSMIT AUDIO RESPONSE 12.5 kHz CHANNEL SPACING MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6B-2 TRANSMIT AUDIO RESPONSE 25 kHz CHANNEL SPACING MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6C POST-LIMITER LOWPASS FILTER RESPONSE MOTOROLA INC. FCC ID: ABZ99FT4081 EXHIBIT 6D-1 MODULATION LIMITING CHARACTERISTIC 12.5 kHz CARRIER SQUELCH MODE XPR 4550 - 12.5 kHz Channel Spacing TX Modulation Limiting - CSQ Mode 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -25-20-15-10-50510152025 Audio Input Level (dB) Deviation (kHz ) 300 Hz Audio 1 kH…

Text truncated - open the document above for the full version.