ABZ99FT4088UHF Mobile Radio w/GPS & BT

EXHIBIT 13A SHEET 1 OF 1 FCC ID: ABZ99FT4088 Date: June 22, 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Low Power Intentional Radiator Part 15, Subpart C, with FCC ID: ABZ99FT4088 Dear Sir or Madam: Motorola Solutions, Inc., 1301 East Algonquin Road, Schaumburg, Illinois, herein submits application for Certification of the equipment identified by FCC ID number ABZ99FT4088. For Bluetooth operation, the transmitter complies with CFR Title 47, Section 15.247, operating in the 2400 - 2483.5 MHz band. Enclosed is a complete Certification Application. Please contact me if you require any additional information. Sincerely, /s/ Larry D. Larsen (signed) Larry D. Larsen Regulatory Coordinator Tel: (847) 538-2239 Fax: (847) 538-4312 E-mail: [email protected]

EXHIBIT 13B SHEET 1 OF 1 FCC ID: ABZ99FT4088 Date: June 29, 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4088 Dear Sir or Madam: Motorola is requesting that form 731 for FCC ID:ABZ99FT4088 with confirmation number EA798183 be corrected to remove the “19” in Grant Notes column of line 1 of the Equipment Specifications. Please contact me if you require any additional information. Sincerely, Larry D. Larsen Larry D. Larsen Regulatory Coordinator Tel: (847) 538-2239 Fax: (847) 538-4312 E-mail: [email protected]

EXHIBIT 13B SHEET 1 OF 1 FCC ID: ABZ99FT4088 REQUEST FOR CONFIDENTIALITY Date: June 22, 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: ABZ99FT4088 Dear Sir or Madam: Motorola Solutions Inc (Motorola) is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Sections 0.457(d), 0.459 and 552(b)(4) of the Freedom of Information Act. This information is only for internal Motorola use and the use of dealers and service providers that have entered into confidential business agreements with Motorola. In addition, Motorola is also requesting that the FCC Exhibit 9 (Internal photos) as Temporary or Short-Term Confidentiality as outline in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” and Exhibit 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, Larry D. Larsen Larry D. Larsen Regulatory Coordinator Tel: (847) 538-2239 Fax: (847) 538-4312 E-mail: [email protected]

MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 1 OF 5 GENERAL VIEW, 1000 CHANNEL MODEL WITH MICROPHONE (CLOSE-UP OF RF EXPOSURE LABEL ON FOLLOWING PAGE) MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 2 OF 5 RF EXPOSURE LABEL (CLOSE-UP VIEW) MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 3 OF 5 FRONT VIEW, 1000 CHANNEL MODEL FRONT VIEW, 32 CHANNEL MODEL MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 4 OF 5 BOTTOM VIEW, SHOWING FCC ID LABEL (CLOSE-UP OF FCC ID LABEL ON FOLLOWING PAGE) MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 5 OF 5 CLOSE-UP VIEW OF FCC ID LABEL

MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 1 SHEET 1 OF 2 IDENTIFICATION LABEL Pursuant to 47 CFR 2.1033(c) LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the bottom of the unit near the front. Shown below is a photo of the actual label affixed to the cast chassis of the transmitter. TYPE The label is a paper polyester film laminated with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with a minimum peel strength of 40 oz/inch. MARKINGS (TEXT) See the Attached Photograph and Exhibit 3, Sheet 4 for the actual location of the FCC label on the device MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 1A SHEET 1 OF 1 GENERAL INFORMATION 1. Production Plans – Pursuant 2.1033 (c) Quantity production is planned. 2. Application References: “Code of Federal Regulations”, Ti tle 47, Part 2, 15, and 90 3. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commissions’ rules.

MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 1 OF 5 TOP VIEW WITH CHASSIS TOP COVER REMOVED (MATING SURFACES OF TOP COVER AND CIRCUIT BOARD IN CHASSIS ARE SHOWN) MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 2 OF 5 TOP VIEW WITH CIRCUIT BOARD REMOVED FROM CHASSIS (MATING SURFACES OF CIRCUIT BOARD AND CHASSIS ARE SHOWN) MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 3 OF 5 FRONT VIEW WITH BLUETOOTH/GPS BOARD INSTALLED ON THE LEFT AND GENERIC OPTION BOARD INSTALLED ON THE RIGHT MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 4 OF 5 FRONT VIEW OF GENERIC OPTION BOARD BACK VIEW OF GENERIC OPTION BOARD MOTOROLA SOLUTIONS, INC FCC ID: ABZ99FT4088 EXHIBIT 3 SHEET 5 OF 5 FRONT VIEW OF BLUETOOTH/GPS BOARD BACK VIEW OF BLUETOOTH/GPS BOARD