ABZ99FT4096Non Broadcast Transmitter

APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT D User Information User Information Tune-up and user / operational manual information are provided in the following exhibits. EXHIBIT DESCRIPTION D1 Tune-Up Procedure D2 User / Operational Manual APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT D2 User / Operational Manual Operational or User’s Manual The manual should include instruction, installation, operator, or technical manuals with required ‘information to the users’. This manual should include a statement that cautions the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The manual shall include RF Hazard warning statements, if applicable. The end user in the US and Canada receives a booklet entitled “MOTOTRBO™ SLR 5000 Series Repeater Quick Start Guide’ ” (part number MN001443A01-AA, March 2015), as all units are shipped with this document. This booklet is printed in English and French Canadian. As indicated in the ‘Quick Start Guide’, more detail can be found in the document “MOTOTRBO™ SLR 5000 Series Repeater Basic Service and Installation Manual” (part number MN001436A01-AA, March 2015). Upon request, published basic service and installation manuals will be sent to the commission and/or telecommunication certification body (TCB). All of the descriptions, block diagrams, and schematics that are included in this filing package are current as of the package submittal date. MOTOTRBO™SLR 5000 Series Repeater en QUICK START GUIDE fr-CA 8QWLWOHGIP3DJH7XHVGD\)HEUXDU\30 1 English m MOTOTRBO™ SLR 5000 Series Repeater Quick Start GuideNotations Used in This ManualNote and caution notations are used throughout the text in this publication. These notations are used to emphasize that safety hazards exist, and due care must be taken and observed. CAUTION indicates a potentially hazardous situation which, if not avoided, might result in equipment damage. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or injury. This symbol indicates areas of the product that pose potential burn hazards. W A R N I N G SLR_5000_NAG.book Page 1 Monday, March 2, 2015 10:19 AM 2 English General Safety and Installation Standards and Guidelines The following are additional general safety precautions that must be observed:• To continue compliance with any applicable regulations and maintain the safety of this equipment, do not install substitute pa rts or perform any unauthorized modifications. • All equipment must be serviced by Motorola trained personnel.• If troubleshooting the equipment while the power is on, be aware of live circuits which could contain hazardous voltage.• Do not operate the radio transmitters unless all RF connectors are secure and all connectors are properly terminated.• All equipment must be properly grounded in accordance with the Motorola R56 and specified installation instructions for safe o peration. • Slots and openings in the cabinet are provided for ventilation. Do not block or cover openings that protect the devices from o verheating. • Some equipment components can become extremely hot during operation. Turn off all power to the equipment and wait until suffic iently cool before touching. • Maintain emergency first aid kits at the site.• Never store combustible materials in or near equipment racks. The combination of combustible material, heat and electrical ene rgy increases the risk of a fire hazard. • Equipment shall be installed in a site that meets the requirements of a “restricted access location,” per (UL60950-1 & EN60950 -1), which is defined as follows: “Access can only be gained by service persons or by users who have been instructed about the reasons for th e restrictions applied to the location and about any precautions that shall be taken; and access is through the use of a tool or lock and key, or other means of security, and is controlled by the authority responsible for the location.” • Burn hazard. The metal housing of the product may become extremely hot. Use caution when working around the equipment. WARNING : For safe installation, operation, service and repair of this equipment, follow the safety precautions and instructions described below, as well as any additional safety information in Motorola’s product service and installation manuals and the Motorola R56 Standards and Guidelines for Communications Sites manual (which can be obtained by ordering CD-ROM 9880384V83). To obtain copies of these materials, please contact Motorola as directed at the end of this section. After installation, these instructions should be retained and readily available for any person operating or servicing this repeater or working near it.Failure to follow these safety precautions and instructions could result in serious injury or property damage. The installation process requires preparation and knowledge of the site before installation begins. Review installation procedures and precautions in the Motorola R56 manual before performing any site or component installation. Personnel must use safe work practices and good judgment, and always follow applicable safety procedures, such as requirements of the Occupational Safety and Health Administration (OSHA), the Nati onal Electrical Code (NEC), and local codes. W A R N I N G SLR_5000_NAG.book Page 2 Monday, March 2, 2015 10:19 AM 3 English • RF energy burn hazard. Disconnect power in the cabinet to prevent injury before disconnecting and connecting antennas. • Shock hazard. The outer shields of all Tx and Rx RF cables outer shields must be grounded per Motorola R56 manual.• Shock hazard. DC input voltage shall be no higher than 60 VDC. This maximum voltage shall include consideration of the battery charging “float voltage” associated with the intended supply system, regardless of the marked power…

Text truncated - open the document above for the full version.

Dan Crowder Certification Department 1516 Centre Circle Downers Grove, Illinois 60515 Telephone: 630 495-9770 Fax: 630 495-9785 E-mail: [email protected] ELITE ELECTRONIC ENGINEERING March 10, 2015 Subject: Request to Update Confidentiality and Supersede User Information Exhibits for ABZ99FT4096 / 109AB- 99FT4096 Good afternoon Dan, Please see the attached documents and the following requests: a) Updated Request for Confidentiality – please note the request to change from short term confidentiality to permanent confidentiality for the Tune-Up Procedure. Everything else is the same as the 2/18/15 request. b) Updated Exhibit D1, Tune-Up Procedure – please supersede this exhibit on the FCC site. The attached includes final manual copy rather than the draft copy previously submitted. c) Updated Exhibit D2, User / Operational Manual – please supersede this exhibit on the FCC site. The attached includes the ‘Quick Start Guide’ which is specifically targeted to the final user. The Basic Service and Installation Manual, which was included in error with the initial filing package submission, is not intended for final users and is not intended to be public knowledge. Please remove the existing Exhibit D2 from the FCC site and replace it with this revised Exhibit D2. d) If any of items above are applicable to the Industry Canada submission, please make those updates also as necessary. Thank you very much and I apologize for the additional efforts required on this. If there are any questions or concerns please feel free to let me know. Sincerely, Ken Weiss Motorola Solutions, Inc. 1301 E. Algonquin Road Room 1043 Schaumburg, IL 60196 Telephone: (847) 576-2789 Mobile Telephone: (847) 561-0815 E-mail: [email protected]

APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C1-1 Photographs of the Device External Front View of Base Radio APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C1-2 Photographs of the Device External Front View of Base Radio, Top Cover and Front Panel Removed APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C1-3 Photographs of the Device External Back View of Base Radio

APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT A1 Equipment Label FCC / IC Identification Numbers The FCC Identifier (FCC ID) is made up of the Grantee Code, supplied by the FCC, and an Equipment Product Code. This equipment product code may be to 14 characters in length, and is assigned by the grantee (applicant). The Grantee Code for this product is ABZ The Equipment Product Code for this product is 99FT4096 The entire FCC ID number is ABZ99FT4096 The Industry Canada (IC) identification consists of the certification / registration number as well as the IC model number. The certification / registration number is made up of Company Number (CN) assigned by Industry Canada, and the Unique Product Number (UPN) assigned by Motorola. The IC model number is the unique model number of the radio assigned by Motorola. The Company Number is 109AB The Certification / Registration Number for this product is 109AB-99FT4096 The IC Model Number is SLR 5700-UHF1 APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT A2-1 Equipment Label FCC / IC Identification Label A representative image of the FCC / IC Identification label is shown below. This label is generated as part of the standard manufacturing process and is printed in the factory. Much of the information that is on the label, such as serial number, model number, etc. is driven by the ordering process and is unique per customer order. MAC 1: 847E40FD2582 MAC 2: 847E40FD2583 SN: Prof . Transceiver 31 NH Made in Mexico Serial No: 478IQY014 8 M odel No: AAR10QCGANQ1AN S/Tanapa: PM UE4392AANAA FCC ID: ABZ99FT4096 IC: 109AB- 99FT4096 IC M odel No: SLR 5700- UHF1 100- 240V ~ M ax 4A 50/60 Hz 11.0- 14.4V 17A M ax This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference SLR 5700 FCC / IC Identification Label APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT A2-2 Equipment Label FCC / IC ID Label The location of the identification label is on the back of the radio, as shown in the photograph below. Location of FCC/ IC Identification Label

APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-1 Photographs of the Device Internal Front View – Modem Module APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-2 Photographs of the Device Internal Front View – Modem Module Top View – Cover Removed APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-3 Photographs of the Device Internal Front View – Modem Module Bottom View – Heat Sink Removed APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-4 Photographs of the Device Internal Front View – Power Amplifier Module APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-5 Photographs of the Device Internal Front View – Power Amplifier Module – Top View, Cover Removed APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-6 Photographs of the Device Internal Front View – Power Amplifier Module – Bottom View, Heat Sink Removed APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT C2-7 Photographs of the Device Internal Front View – Power Supply Module

APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT E (Sheet 1 of 2) Report on Test Measurements Measurements Report The measurement report shows compliance information against the pertinent technical standards. Each parameter is measured generally at the low end, middle, and at the high end of the applicable frequency band. Each section of the report contains either verbiage or a graph (or graphs) which show compliance to applicable standards as required, explains testing method used, and indicates what the applicable specification is. Information and performance relative to 25 kHz ‘wideband’ operation is included in the report. Although wideband operation in the 150-174 MHz and 421-512 MHz bands is no longer allowable for rule part 90 in the US, it is available for other FCC rule parts and in use in other countries, including Industry Canada. The time division multiple access (TDMA) mode of operation provides two voice paths in a 12.5 kHz channel bandwidth and a data rate of 9600 bits per second bits per second in a channel bandwidth of 12.5 kHz. This is equivalent to one voice path per 6.25 kHz of channel bandwidth and 4800 bits per second or greater in a 6.25 kHz channel bandwidth. The SLR 5700 conforms to the spectrum efficiency requirements of FCC rule § 90.203 (j) (5). A list of test equipment for all sections, and certification signoff page are included at the end of the measurement report. SUBMITTED MEASURED DATA -- INDEX EXHIBIT DESCRIPTION E1-1 RF Output-Data E1-2 Occupied Bandwidth, Digital Emissions: Setup, Specifications, and Index E1-2.1 MOTOTRBO TM Digital Modulation, 406.1125 MHz E1-2.2 MOTOTRBO TM Digital Modulation, 420.0125 MHz E1-2.3 MOTOTRBO TM Digital Modulation, 429.9875 MHz E1-2.4 MOTOTRBO TM Digital Modulation, 450.0125 MHz E1-2.5 MOTOTRBO TM Digital Modulation, 460.0125 MHz E1-2.6 MOTOTRBO TM Digital Modulation, 469.9875 MHz E1-3 Conducted Spurious Emissions: Setup, Specifications, and Index E1-3.1 Conducted Spurious Harmonic Emissions, Power 60 Watts E1-3.2 Conducted Spurious Harmonic Emissions, Power 1 Watt E1-3.3 Conducted Spurious Emission Spectrum, 60 Watts, 406.1125 MHz E1-3.4 Conducted Spurious Emission Spectrum, 60 Watts, 420.0125 MHz E1-3.5 Conducted Spurious Emission Spectrum, 60 Watts, 429.9875 MHz E1-3.6 Conducted Spurious Emission Spectrum, 60 Watts, 450.0125 MHz E1-3.7 Conducted Spurious Emission Spectrum, 60 Watts, 460.0125 MHz E1-3.8 Conducted Spurious Emission Spectrum, 60 Watts, 469.9875 MHz E1-4 Radiated Spurious Emissions: Setup, Specifications, and Index E1-4.1 Radiated Spurious Harmonic Emissions, Power 60 Watts E1-4.2 Radiated Spurious Harmonic Emissions, Power 1 Watt E1-5 Frequency Stability: Setup, Specifications, and Index E1-5.1 Frequency Stability Vs Temperature E1-5.2 Frequency Stability Vs Voltage (Continued) APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT E (Sheet 2 of 2) Report on Test Measurements Measurements Report SUBMITTED MEASURED DATA – INDEX (Continued) EXHIBIT DESCRIPTION E1-6 Frequency Transient Behavior: Setup, Specifications, and Index E1-6.1, 2, 3 Frequency Transient Behavior, 25 kHz Channel Key-Up, 406.1 - 430 MHz E1-6.4, 5, 6 Frequency Transient Behavior, 25 kHz Channel Key-Up, 450 - 470 MHz E1-6.7, 8, 9 Frequency Transient Behavior, 25 kHz Channel De-Key, 406.1 - 430 MHz E1-6.10, 11, 12 Frequency Transient Behavior, 25 kHz Channel De-Key, 450 - 470 MHz E1-6.13, 14, 15 Frequency Transient Behavior, 12.5 kHz Channel Key-Up, 406.1 - 430 MHz E1-6.16, 17, 18 Frequency Transient Behavior, 12.5 kHz Channel Key-Up, 450 - 470 MHz E1-6.19, 20, 21 Frequency Transient Behavior, 12.5 kHz Channel De-key, 406.1 - 430 MHz E1-6.34, 23, 24 Frequency Transient Behavior, 12.5 kHz Channel De-key, 450 - 470 MHz E1-7 Audio Frequency Response – Modulation Characteristics: Setup, Specifications, and Index E1-7.1, 2, 3 Audio Frequency Response – 25 kHz Channels – 406.1 - 430 MHz E1-7.4, 5, 6 Audio Frequency Response – 25 kHz Channels – 450 - 470 MHz E1-7.7, 8, 9 Audio Frequency Response – 12.5 kHz Channels – 406.1 - 430 MHz E1-7.10, 11, 12 Audio Frequency Response – 12.5 kHz Channels – 450 - 470 MHz E1-8 Audio Modulation Limiting – Modulation Characteristics: Setup, Specifications, and Index E1-8.1, 2, 3 Audio Modulation Limiting – 25 kHz Channels – 406.1 - 430 MHz E1-8.4, 5, 6 Audio Modulation Limiting – 25 kHz Channels – 450 - 470 MHz E1-8.7, 8, 9 Audio Modulation Limiting – 12.5 kHz Channels – 406.1 - 430 MHz E1-8.10, 11, 12 Audio Modulation Limiting – 12.5 kHz Channels – 450 - 470 MHz E1-9 Occupied Bandwidth Description – Analog Modulation: Setup, Specifications, and Index E1-9.1, 2, 3 Occupied Bandwidth Plots – 406.1125 MHz – Tone / No PL / DPL – 25 kHz Channels E1-9.4, 5, 6 Occupied Bandwidth Plots – 420.0125 MHz – Tone / No PL / DPL – 25 kHz Channels E1-9.7, 8, 9 Occupied Bandwidth Plots – 429.9875 MHz – Tone / No PL / DPL – 25 kHz Channels E1-9.10, 11, 12 Occupied Bandwidth Plots – 450.0125 MHz – Tone / No PL / DPL – 25 kHz Channels E1-9.13, 14, 15 Occupied Bandwidth Plots – 460.0125 MHz – Tone / No PL / DPL – 25 kHz Channels E1-9.16, 17, 18 Occupied Bandwidth Plots – 469.9875 MHz – Tone / No PL / DPL – 25 kHz Channels E1-9.19, 20, 21 Occupied Bandwidth Plots – 406.1125 MHz – Tone / No PL / DPL – 12.5 kHz Channels E1-9.34, 23, 24 Occupied Bandwidth Plots – 420.0125 MHz – Tone / No PL / DPL – 12.5 kHz Channels E1-9.25, 26, 27 Occupied Bandwidth Plots – 429.9875 MHz – Tone / No PL / DPL – 12.5 kHz Channels E1-9.28, 29, 30 Occupied Bandwidth Plots – 450.0125 MHz – Tone / No PL / DPL – 12.5 kHz Channels E1-9.31, 32, 33 Occupied Bandwidth Plots – 460.0125 MHz – Tone / No PL / DPL – 12.5 kHz Channels E1-9.34, 35, 36 Occupied Bandwidth Plots – 469.9875 MHz – Tone / No PL / DPL – 12.5 kHz Channels E1-11 Test Equipment Used E1-12 Statement of Certification APPLICANT: MOTOROLA SOLUTIONS EQUIPMENT TYPE: ABZ99FT4096 109AB-99FT4096 EXHIBIT E1-1 Report on Test Measurements RF Power Ou…

Text truncated - open the document above for the full version.