ACLAP3L61Microwave Oven with two Magnetrons Model 2M261-M32

Covered Equipment CFR 47 §2.911 (d)(5) Attestation May 10, 2026 MOD-26-F002A Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: FCC ID: ACLAP3L61 for Microwave Oven To whom it may concern: Panasonic Corporation of North America (“the applicant”) certifies that the equipment for which authorization is sought is not the equipment on the Covered List, as established pursuant to § 1.50002 of CFR Title 47, that is prohibited from obtaining an equipment authorization under this subpart. Panasonic Corporation of North America certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Panasonic Corporation of North America certifies that no Cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software is installed in the equipment being certified. The above-referenced Covered List is published by the Public Safety and Homeland Security Bureau (PSHSB), pursuant to Section 1.50002 of the Commission’s rules. Sincerely, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel: 201-348-7760 / [email protected] Ben Botros Manager – Regulatory Compliance Panasonic Corporation of North America Agent Designation Attestation CFR 47 §2.911 and §2.909 Federal Communications Commission Date: April 23, 2026 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: FRN 0027086172 with FCC Grantee Code ACL - Attestation Statements Panasonic Corporation of North America (“the applicant”) certifies that, Panasonic Corporation of North America is our designated U.S. agent for service of process for the above referenced FCC Grantee Code ACL. Panasonic Corporation of North America accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Panasonic Corporation of North America accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for Grantee Code ACL. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Designated U.S. Agent Information: Name: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, New Jersey, United States Contact Person: Ben Botros Tel.: 201-348-7760 Email: [email protected] We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. This agreement applies to all products applied by Panasonic Corporation of North America for FCC Grantee Code ACL and is valid within the product life. Sincerely, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America FRN 0027086172

Request for Permanent Confidentiality April 23, 2026 MOD-26-F002A Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Re: FCC ID: ACLAP3L61 for Microwave Oven models NE-1266 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §0.457, §0.459), we are requesting the Commission to withhold the following attachments as permanent confidential documents from public disclosure. • Operational Description • Schematics • Block Diagram Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Thank you for your attention in this matter. Sincerely, Ben Botros Manager – Regulatory and Compliance Panasonic Corporation of North America

Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 Tel/Fax: 201-348-7760 / [email protected] Ben Botros, Manager – Regulatory & Compliance Panasonic Corporation of North America April 23, 2026 MOD-26-F002A Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Original Application for Microwave Oven Model NE-1266 Under FCC: ID ACLAP3L61 for FCC Part 18 Please be advised Panasonic Corporation of North America hereby submits Original application for Microwave Oven Model NE-1266 under FCC ID ACLAP3L61. FCC ID: ACLAP3L61 FCC Rule Parts: FCC Part 18 Applicant & Grantee: Panasonic Corporation of North America Two Riverfront Plaza, Newark, NJ 07102-5490 USA FRN Number: 0027086172 We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Further, this application for equipment authorization has not been submitted to another TCB for Certification. Please advise the undersigned should you have any questions or comments. Authorized by, Ben Botros Manager – Regulatory & Compliance Panasonic Corporation of North America

EXHIBIT B – EXTERNAL PHOTOGRAPHS Front View Rear View Left View Right View Top View Bottom View Front View with Door Open

EXHIBIT F SAMPLE AND LOCATION OF FCC ID LABEL Grantee Code: ACL Product Code: AP3L61 PKATJX: Code identifies location of manufacture PKATJX denotes: Panasonic Kitchen Appliances Technology (Jiaxing) Co., Ltd No.369 Chenggong Road, Chengnan Street, Nanhu District, Jiaxing City, Zhejiang Province, China NE-1266 ACLAP3L61 Left Side View

EXHIBIT C – INTERNAL PHOTOGRAPHS Right Side View without Enclosure Left Side View without Enclosure Rear View without Enclosure Top View without Enclosure Top and bottom view of PCB A UNIT (Main control Board) Top and bottom view of PCB D UNIT (Power supply, Power relay, Line noise filter Board) Magnetron View Door Assembly View

Page 1 of 10 Control No. 23130-2502 JQA File No. : KL80250981 Issue Date : March 13, 2026 T E S T R EP O R T Applicant : PANASONIC CORPORATION OF NORTH AMERICA Address : Two Riverfront Plaza, Newark, New Jersdey, United States 07102-5490 Products : Commercial Microwave Oven Model No. : NE-1266 Serial No. : FES003 Test Standard : CFR 47 FCC Rules and Regulations Part 18 FCC ID : ACLAP3L61 Test Results : Pass (in partial testing, see test results) Date of Receipt : February 19, 2026 Yasuhisa Sakai Manager Japan Quality Assurance Organization Kitakansai Testing Center Saito EMC Branch EMC Div. 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan ● The test results in this test report was made by using the measuring instruments which are traceable to national standards of measurement in accordance with ISO/IEC 17025. ● The applicable standard, testing condition and testing method which were used for the tests are based on the request of the applicant. ● The test results presented in this report relate only to the offered test sample. ● The contents for the equipment under test (EUT) such as identification information in clause 2 and 6 of this report were provided by the applicant. JQA is not responsible for the test results affected by the incorrect information. ● The contents of this test report cannot be used for the purposes, such as advertisement for consumers. ● This test report shall not be reproduced except in full without the written approval of JQA. ● VLAC does not approve, certify or warrant the product by this test report. ● The laboratory activity period is defined as the time from the date of receipt of the EUT to the date of issue of this report. ● ISO/IEC 17025 accreditation scope is limited to the testing activity. VLAC-001-2 JQA File No. : KL80250981 Issue Date : March 13, 2026 Page 2 of 10 Control No. 23130-2502 REVISION HISTORY File No. Contents Issue Date KL80250981 Initial Issue March 13, 2026 JQA File No. : KL80250981 Issue Date : March 13, 2026 Page 3 of 10 Control No. 23130-2502 TABLE OF CONTENTS Page 1 Summary of Test Results .................................................................................................................... 4 2 Description of Equipment Under Test (EUT)..................................................................................... 5 3 Test Location ........................................................................................................................................ 6 4 Accreditation of Test Laboratory ....................................................................................................... 6 5 Measurement Uncertainty ................................................................................................................... 6 6 Setup of EUT ........................................................................................................................................ 7 6.1 Test Configuration .......................................................................................................................... 7 6.2 Test Arrangement (Drawings) ....................................................................................................... 7 6.3 Operating Condition ....................................................................................................................... 7 7 Test Item ............................................................................................................................................... 8 7.1 Radiation Hazard ............................................................................................................................ 8 JQA File No. : KL80250981 Issue Date : March 13, 2026 Page 4 of 10 Control No. 23130-2502 1 Summary of Test Results Applied Standard : CFR 47 FCC Rules and Regulations Part 18 – Industrial, Scientific, and Medical Equipment Item Standard (Procedure) Result Note Radiation Hazard FCC/OET MP-5 (1986) FCC Part 18 §18.313 Pass RF Output Power FCC/OET MP-5 (1986) Not Tested 1 ISM Frequency FCC/OET MP-5 (1986) FCC Part 18 §18.301 Not Tested 1 AC Powerline Conducted Emission FCC/OET MP-5 (1986) FCC Part 18 §18.307 Not Applicable 2 Radiated Emission FCC/OET MP-5 (1986) FCC Part 18 §18.305 Not Tested 1 1) By manufacturer request. 2) The EUT is categorized in non-consumer equipment. In the approval of test results, - No deviations were employed from the applied standard. - No modifications were conducted by JQA to achieve compliance to the limitations. Reviewed by Hiroyuki Nakamura / Senior Manager Tested by Yasuhisa Sakai / Manager JQA File No. : KL80250981 Issue Date : March 13, 2026 Page 5 of 10 Control No. 23130-2502 2 Description of Equipment Under Test (EUT) Manufacturer Panasonic Corporation Kitchen Appliances Business Division 2-3-1-3 Noji-higashi, Kusatsu City, Shiga 525-0058, Japan Products Commercial Microwave Oven Model No. NE-1266 Serial No. FES003 Product Type Pre-production Date of Manufacture September 8, 2025 Power Rating 120VAC 60Hz Rated RF Power Output 1890 W EUT Grounding Grounded at the plug end of the power line Type of Device Non-consumer equipment using ISM frequency EUT Authorization Certification Operating Frequency 2450 MHz JQA File No. : KL80250981 Issue Date : March 13, 2026 Page 6 of 10 Control No. 23130-2502 3 Test Location Japan Quality Assurance Organization (JQA) Kitakansai Testing Center Saito EMC Branch EMC Div. 7-3-10, Saito-asagi, Ibaraki-shi, Osaka 567-0085, Japan 4 Accreditation of Test Laboratory The test laboratory is accredited under ISO/IEC 17025 by the following accreditation bodies and the test facility of the laboratory is registered by the following bodies. Test Laboratory Body Code/No. or Description Kitakansai Testing Center Saito EMC Branch EMC Div. VLAC Accreditation No. VLAC-001-2 BSMI Laboratory Code SL2-IS/IN/R1/R2/A1-E-6006 CNAS Accreditation No. L8352 VCCI Laboratory Registration No. A-0002 FCC Designation No. JP5008 Test Firm Registration No. 6…

Text truncated - open the document above for the full version.

Form 6 File No. S25063-1 (2) Page 1 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation TEST REPORT Test Report File No. : S25063-1 (2) Date of Issue : 19 March, 2026 Type : Commercial Microwave Oven Model No. : NE-1266 Applicant : Panasonic Corporation of North America Address : Two Riverfront Plaza, Newark, New Jersdey, United States 07102-5490 Manufacturer : Panasonic Corporation Living Appliance and Solutions Company Address : 2-3-1-3, Nojihigashi, Kusatsu City, Shiga, 525-0058, Japan Test Result Accord : ■Positive□Negative to the standards at page 4 Approved by: Reviewed by: Naoto Ishibashi Takamori Kimoto Laboratory Director, EMC Test Laboratory Technical Manager, EMC Test Laboratory The test laboratory is not responsible for the data and information provided by the applicant, which may affect the validity of the results. The results in this report apply only to the tested sample. This test report shall not be reproduced in full or partial, without the written approval of the test laboratory. This test report must not be used by the customer to claim product certification, approval, or endorsement by any agency of the U.S. Government. This test report replaces already issued S25063-1 (1) (10 March, 2026). Form 6 File No. S25063-1 (2) Page 2 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Revision History Revision Test Report No. Date Description - S25063-1 19 January, 2026 Original Issue (1) S25063-1 (1) 10 March, 2026 Page 1: The applicant and manufacturer have been corrected. Page 6: Added “Test Firm Registration Number” and “Designation Number” to the “Test Site Description”. Page 8: The applicant have been corrected. Added EUT Categorized to the identification of EUT A. (2) S25063-1 (2) 19 March, 2026 Page 33: Added “Appendix B External Photographs”. Form 6 File No. S25063-1 (2) Page 3 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Directory Documentation Page Definitions for Symbols used in this Test Report .................................................................................................................. 4 Test Standards ..................................................................................................................................................................... 4 Deviation From The Standards ............................................................................................................................................. 4 Purpose ................................................................................................................................................................................ 4 Requirement ......................................................................................................................................................................... 5 Summary .............................................................................................................................................................................. 6 Environmental Conditions ..................................................................................................................................................... 7 Measurement Uncertainty ..................................................................................................................................................... 7 Equipment under Test* ......................................................................................................................................................... 8 Operation of the EUT during Testing* ................................................................................................................................... 9 Test Results and Conditions ............................................................................................................................................... 11 Radiated Emission (9 kHz - 30 MHz : Electric Field) ...................................................................................................... 11 Radiated Emission (Below 1 GHz : Electric Field) .......................................................................................................... 16 Radiated Emission (Above 1 GHz : Electric Field).......................................................................................................... 21 Operating Frequency measurements (OST MP-5, 4.5) .................................................................................................. 28 Variation in Operating Frequency with Line Voltage (OST MP-5, 4.5)............................................................................ 29 Appendix A Lists of the Test Equipment ........................................................................................................................ 30 Appendix B – External Photographs ................................................................................................................................... 33 (*) Data and information are provided by the applicant. The information on the cover and data is also provided by the customer. Form 6 File No. S25063-1 (2) Page 4 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Definitions for Symbols used in this Test Report Black box indicates (■) that the listed condition, standard, or equipment was applicable for this Report. Blank box indicates (□) that the listed condition, standard, or equipment was not applicable for this Report. Test Standards The tests were performed according to the following standards: ■ FCC Part 18 Subpart C Industrial, Scientific, and Medical Equipment ■ FCC / OST MP-5 : 1986 - Test Procedure. Deviation From The Standards Deviations from or additions to the test method: No deviation or addition Purpose The purpose of this report is to show compliance of the Commercial Microwave Oven / Model NE-1266 to the requirement of Par…

Text truncated - open the document above for the full version.

Form 6 File No. S25063-1 (2) Page 13 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Photo of the Test Set-up Pre-check : A loop antenna was set at a height of 2 m and a level with a small margin of Vertical axis (0°, 45°, 90°, 135°) and Horizontal Axis was measured using a spectrum analyzer. Final measurement : Emission levels (Ave. value) were measured by means of the test receiver referring the result of Pre-check. Drawing: Vertical axis Horizontal Axis EUT Loop Antenna 135 deg 90 deg 45 deg 0 deg 3 m 0.6 m Loop Antenna 9 kHz - 30 MHz Test table EUT Turntable Ground plane EMI test receiver (Ave.) 1 m Antenna height 2 m 3 m EUT Test table 1 m Antenna height 2 m Turntable Ground plane EMI test receiver (Ave.) EXHIBIT D - TEST SETUP PHOTOS Form 6 File No. S25063-1 (2) Page 14 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Worst angle Front View Form 6 File No. S25063-1 (2) Page 15 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Rear View Form 6 File No. S25063-1 (2) Page 18 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Photographs of the Test Set-up The EUT (with the peripherals) was placed on a 1.0 m high nonconductive turntable along. The turntable was separated from the antenna by a distance of 3 m. Cables for peripherals were placed in a position to produce maximum emissions as determined by experimentation, and the operation mode was selected for maximum emission. Pre-check: Radiated emission levels (PEAK value) which have small margin for the regulation were measured by means of spectrum analyzer changing antenna movement (1 m - 4 m) and table rotation (0 degree - 360 degree). Final measurement: Emission levels (Ave. value) were measured by means of the test receiver referring the result of Pre-check. The emission levels from the EUT were maximized changing conditions; Turntable rotation, Antenna height and arrangement of the EUT. Drawing : EMI test receiver (Ave.) Antenna height 1 m - 4 m Biconical Antenna 30 MHz - 200 MHz Logperiodic Antenna 200 MHz - 1000 MHz 3 m (H / V) Test table 1.0 m Ground plane Turntable Preamplifier EUT Form 6 File No. S25063-1 (2) Page 19 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Worst angle Front View Form 6 File No. S25063-1 (2) Page 20 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Rear View Form 6 File No. S25063-1 (2) Page 25 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Photographs of the Test Set-up The EUT(with the peripherals) was placed on a 1.0 m high nonconductive turntable along. The turntable was separated from the antenna by a distance of 3 m. Cables for peripherals were placed in a position to produce maximum emissions as determined by experimentation, and the operation mode was selected for maximum emission. Pre-check: Radiated emission levels (Ave. value) which have small margin for the regulation were measured by means of spectrum analyzer changing antenna movement (1 m - 4 m) and table rotation (0 degree - 360 degree). Final measurement: Emission levels (Ave. value) were measured by means of the signal analyzer (1 GHz - 25 GHz) referring the result of Pre-check. The emission level from the EUT were maximized changing conditions; Turn table rotation, Antenna height, azimuth and arrangement of the EUT. Drawing : 1 GHz - 3 GHz Drawing : 3 GHz - 6 GHz Preamplifier Horn Antenna 1 GHz - 3 GHz 3 m (H / V) Test table (h = 1.0 m) Ground plane Turntable Signal Analyzer (Ave.) EUT See the table on the 21 page Antenna height 1 m - 4 m Horn Antenna 3 GHz - 6 GHz 3 m (H / V) Test table (h = 1.0 m) Ground plane Turntable Signal Analyzer (Ave.) EUT See the table on the 21 page Antenna height 1 m - 4 m Form 6 File No. S25063-1 (2) Page 26 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Drawing : 6 GHz - 25 GHz Worst angle Horn Antenna 6 GHz - 25 GHz 3 m (H / V) Test table (h = 1.0 m) Ground plane Turntable Signal Analyzer (Ave.) EUT Preamplifier See the table on the 21 page Antenna height 1 m - 4 m Form 6 File No. S25063-1 (2) Page 27 of 34 EMC Test Laboratory, Product Analysis Center, Panasonic Holdings Corporation Front View Rear View