AEZCPE-310-200W-CDMA subscriber terminal

Before beginning the installation, familiarize yourself with the top and side panels of the indoor unit. The lights on the top panel tell you when the SOMAport is ready. Off The SOMAport is not receiving power. Amber The SOMAport is booting and running its internal diagnostics. Flashing amber The SOMAport is upgrading its software. Green The SOMAport is powered and operating normally. Red An error occurred. The SOMAport is not currently functional. Off The SOMAport is not receiving power. Amber The SOMAport is attempting to locate a base station. Flashing amber The SOMAport cannot locate a base station. Flashing green The SOMAport has located a base station and is attempting to establish a connection. Green The SOMAport has located a base station and has established a connection. Red An error occurred. The SOMAport is not currently functional. Status Light Network Light When setting up the SOMAport, follow these guidelines:  Do not connect any third-party devices to the indoor unit, CAT5 cable, or outdoor unit.  Do not use the outdoor unit indoors. It must be mounted on a permanent outdoor structure. 1 Insert the connector of the power cord that is attached to the power supply into the power jack on the indoor unit. 2 Insert the socket end of the AC power cord into the power supply. 3 Position and orient the SOMAport in the location in which you plan on keeping it. 4 Insert the plug end of the AC power cord into a power outlet. The SOMAport takes up to five minutes to start, connect to your service provider’s network, and acquire a radio signal. The light on the power supply indicates whether or not it is receiving power. Wait until the Network light on the top of the SOMAport turns green before you begin connecting equipment to the SOMAport. The Outdoor SOMAport consists of two parts: an outdoor unit and an indoor unit. After installing the SOMAport, simply plug-in the indoor unit and connect it to your computer using the provided Ethernet cable. The SOMAport will automatically connect your service provider and you can setup your account using a Web browser. If you are using your SOMAport to provide telephone service, you can connect ordinary telephones to it. The Ethernet cable is supplied with the SOMAport. If your computer has an Ethernet port, use the Ethernet cable. If your computer does not have an Ethernet port, you will need to purchase an Ethernet card or an Ethernet-to-USB adapter. Copyright 2005 SOMA Netowrks, Inc. All Rights Reserved. SOMA, SOMA Networks and the star-and-circle design are trademarks or registered trademarks of SOMA Networks, All of SOMA Netwoks’ product names are trademarks of SOMA Netowrks, Inc. All other company and product names may be trademarks or registered trademarks of their respective owners. Products and services of SOMA Networks, Inc. may be protected by one or more pending or issued U.S. or foreign patents. Part 006218 revision 01 Before pluggin in the SOMAport, make sure that the CAT5 cable from the outdoor unit has been inserted to the ODU/IF port on the side of the indoor unit.

OUTDOOR SOMAPORT USER GUIDE Part 006217 revision 01 3 Preface .................................................................................. 9 Regulatory Notices ........................................................................... 15 Introduction ....................................................................... 17 Overview ......................................................................................... 18 System Components ........................................................................ 19 The Indoor Unit .............................................................................. 20 Antenna ........................................................................................... 22 Connecting the Indoor Unit ............................................... 23 Connecting the Power Supply and Powering on the Indoor Unit .... 24 Connecting a Computer via Ethernet .............................................. 25 Connecting Telephones to the Indoor Unit ..................................... 26 Activating Service ............................................................................. 30 Connecting Multiple Computers ........................................ 31 Overview ......................................................................................... 32 Using an Ethernet Hub .................................................................... 33 Using an Internet Router ................................................................. 34 Troubleshooting ................................................................. 35 Finding Causes of Computer Problems ........................................... 36 Finding Causes of Telephone Problems .......................................... 38 Finding Causes of Outdoor Unit Problems ...................................... 40 The Signal is Weak .......................................................................... 41 There is a Fault Condition ............................................................... 43 CONTENTS 4 The SOMAport is Not Receiving Power .......................................... 44 There is a Problem with the Ethernet Cabling ................................. 45 The Computer Uses an Old Dial-up Connections ........................... 46 Internet Explorer LAN Settings are Incorrect ................................... 48 Ethernet Network Settings are Incorrect .......................................... 49 IP Address Needs to be Renewed ..................................................... 58 Specifications ......................................................................61 5 SOMA NETWORKS INC. ENDUSER PRODUCT LICENSE AGREEMENT THE OUTDOOR SOMAPORT™ SUBSCRIBER STATION AND PROVIDED SOFTWARE CON- TAIN CERTAIN COMPUTER PROGRAMS AND OTHER PROPRIETARY MATERIAL OF SOMA NETWORKS, INC. OR LICENSED TO SOMA NETWORKS, INC., THE USE OF WHICH IS SUB- JECT TO THIS AGREEMENT. BY: (A) SIGNING AN AGREEMENT FOR SERVICE WITH YOUR SERVICE PROVIDER; (B) OPENING THE SEALED ENVELOPE CONTAINING THE OUTDOOR SOMAPORT; OR (C) USING THE OUTDOOR SOMAPORT, YOU ASSENT TO AND ACCEPT THIS ENDUSER PRODUCT LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH ALL THE TERMS OF THIS AGREEMENT YOU MUST RETURN THIS PRODUCT (WITH THE ENVE- LOPE STILL SEALED), ALL MANUALS AND DOCUMENTATION, ANY SOFTWARE PACKAGES PROVIDED WITH THE SOMAPORT AND PROOF OF PAYMENT TO THE PLACE YOU OBTAINED THEM FOR A FULL REFUND WITHIN THIRTY (30) DAYS OF FIRST ACQUIRING THE OUTDOOR SOMAPORT, OTHERWISE YOU ARE DEEMED TO HAVE ACCEPTED AND AGREED TO THESE TERMS AND CONDITIONS. UNAUTHORIZED REPRODUCTION, DIS- TRIBUTION, DECOMPILATION OR OTHER REVERSE ENGINEERING OF THIS PRODUCT INCLUDING ITS HARDWARE AND/OR SOFTWARE, OR ANY PORTION OF IT, IS PROHIB- ITED AND MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE PROS- ECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW. 1. GRANT OF LICENSE: Subject to the terms of this Enduser Product License Agreement (the "Agree- ment"), SOMA Networks, Inc. ("SOMA") grants you (the "Licensee") a non-sub-licensable, non-exclusive right ("License") to use the Product. "Product" means, collectively, the Software and the provided hardware, and specifically the Outdoor SOMAport™ subscriber station and its accessories, if any, together with docu- mentation provided to you by SOMA or your service provider. "Software" means, collectively, the version of the SOMA software program in object code format and all updates to that program distributed to you by SOMA, directly or indirectly, by any means and includes any firmware provided to you with the Product. You have no right, unless otherwise explicitly permitted, to receive any source code or design documentation relating to the Product. SOMA retains ownership of all Software copies. The Software and this License is only provided to you to be used in conjunction with the Outdoor SOMAport provided to you by SOMA or your service provider when you subscribed to services that utilize the SOMA wireless air interface technology and is not licensed to you to be used for any other purpose. 2. RESTRICTIONS: Except as reasonably required to use the Product strictly in accordance with the License and this Agreement, you may not copy any Software. Licensee shall not (and shall not allow any third party to): (I) decompile, disassemble, or otherwise reverse engineer or attempt to reconstruct or dis- cover any source code or underlying ideas or algorithms or file formats or programming or interoperability interfaces of the Product by any means whatsoever; (II) remove any Product identification, copyright or other notices; (III) modify, incorporate into or with other software or create a derivative work of any part of the Software or Product; or (IV) modify or otherwise alter the operation of the Product. Various compo- nents, functions, routines and/or portions of the Product may be protected by Intellectual Property Rights ("IPR") including, but not limited to, designs, copyrights, tra…

Text truncated - open the document above for the full version.

51 Tr o ubleshooting „If multiple TCP/IP connections are listed, select the one that contains "Ethernet", "NIC", or "10/100 MB" in its name, go to step 4. „If TCP/IP is not listed, install it: iClick Add. The Select Network Component Type window opens. iiSelect Protocol from the list. iiiClick Add. The Select Network Protocol window opens. ivSelect Microsoft from the Manufacturers list. vSelect TCP/IP from the Network Protocols list. viClick OK. viiInsert the Windows 98 or ME CD or reboot the computer if prompted to do so. viiiIf the PC reboots, repeat steps 1 to 3. 4Check TCP/IP properties: iClick Properties with the correct TCP/IP connection selected. The TCP/IP Properties window opens to the IP Address tab. iiMake sure the Obtain an IP address automatically radio button is enabled. iiiClick the DNS Configuration tab. ivMake sure the Disable DNS radio button is enabled. vClick OK on the TCP/IP Properties window. viClick OK on the Network window. viiRestart the computer if prompted to do so. 5Check your Internet connection by launching a Web browser on the computer connected to the indoor unit. „If your browser automatically opens to your service provider’s Web site, full service has already been activated and you can begin using your SOMAport for Internet service. „If your browser does not automatically open to your service provider’s Web site, go to step 6. 6Enter a valid Internet address (such as www.google.com) in the Address field and press Enter. „If the Web page opens, full service has already been activated and you can begin using your SOMAport for Internet service. 52 Tr o ubleshooting „If your service provider’s Web page opens, activate full service by following the sign-up procedure that is provided on the Web site. „If your computer attempts an Internet connection using an old dial-up connection, see "The Computer Uses an Old Dial-Up Connection" on page 46. „If you do not establish an Internet connection, see "Finding Causes of Computer Problems" on page 36. To change network settings in Windows 2000 1Right-click the My Network Places icon and choose Properties from the pull-down menu. The Network and Dial-up Connections window opens. 2Select the Local Area Connection icon. „If there are multiple local area connections, read the device name beside each icon and double-click the one that is associated with the Ethernet card. „If there is no icon, the Ethernet card has not been properly installed. Install the Ethernet card by following the manufacturer’s instructions, then return to this procedure. The Local Area Connection Status window opens. 3Click Properties. The Local Area Connection Properties window opens. 4Select Internet Protocol (TCP/IP). If Internet Protocol (TCP/IP) is not listed, install it as follows: iClick Install. The Select Network Component Type window opens. iiSelect Protocol from the list. iiiClick Add. The Select Network Protocol window opens. ivSelect Internet Protocol (TCP/IP). vClick OK. viInsert the Windows 2000 CD or reboot the computer if prompted to do so. viiIf the PC reboots, repeat steps 1 to 4. 53 Tr o ubleshooting 5Check TCP/IP properties: iClick Properties. iiThe Internet Protocol (TCP/IP) Properties window opens to the General tab. iiiMake sure the Obtain an IP address automatically radio button is enabled. ivMake sure the Obtain DNS server address automatically radio button is enabled. vClick OK on the Internet Protocol (TCP/IP) Properties window. viClick OK on the Local Area Connection Properties window. viiClick Close on the Local Area Connection Status window. viiiRestart the computer if prompted to do so. 6Check your Internet connection by launching a Web browser on the computer connected to the indoor unit. „If your browser automatically opens to your service provider’s Web site, full service has already been activated and you can begin using your SOMAport for Internet service. „If your browser does not automatically open to your service provider’s Web site, go to step 7. 7Enter a valid Internet address (such as www.google.com) in the Address field. „If the Web page opens, full service has already been activated and you can begin using your SOMAport for Internet service. „If your service provider’s Web page opens, activate full service by following the sign-up procedure that is provided on the Web site. „If your computer attempts to connect to the Internet using an old dial-up connection, see "The Computer Uses an Old Dial- Up Connection" on page 46. „If you do not get an Internet connection, see "Finding Causes of Computer Problems" on page 36. 54 Tr o ubleshooting To change network settings in Windows XP 1Choose Start → Settings → Network Connections. The Network Connections window opens. 2Select the Local Area Connection icon. „If there are one or more Local Area Connection icons, double-click the Local Area Connection icon that is associated with the Ethernet card. „If there is no icon, the Ethernet card has not been properly installed. Install the Ethernet card by following the manufacturer’s instructions, then return to this procedure. The Local Area Connection Status window opens. 3Click Properties. The Local Area Connection Properties window opens. 4Select Internet Protocol (TCP/IP). If Internet Protocol (TCP/IP) is not listed, install it as follows: iClick Install. The Select Network Component Type window opens. iiSelect Protocol from the list. iiiClick Add. The Select Network Protocol window opens. ivSelect Internet Protocol (TCP/IP). vClick OK. viInsert the Windows XP CD or reboot the computer if prompted to do so. viiOnce TCP/IP has been installed, repeat steps 1 to 4. 5Check TCP/IP properties: iClick Properties. The Internet Protocol (TCP/IP) Properties window opens to the General tab. iiMake sure the Obtain an IP address automatically radio button is enabled. iiiMake sure the Obtain DNS server address automatically radio button is enabled. ivClick OK on the Internet Protocol (TCP/IP) Properties window. 55 Tr o ubleshoot…

Text truncated - open the document above for the full version.

TNO Electronic Products & Services (EPS) B.V. Nederlandse Organisatie voor toegepast-natuurwetenschappelijk onderzoek / Netherlands Organisation for Applied Scientific Research Smidshornerweg 18 P.O. Box 15 9822 ZG Niekerk The Netherlands www.tno.nl T +31 594 505005 F +31 594 504804 E [email protected] Subject Request for confidentiality Date November 30, 2005 Our reference 05K0783b Your reference - Page 1 of 1 Our General Terms and Conditions, as filed at the Chamber of Commerce in Groningen, are applicable to all orders given to TNO Electronic Products & Services (EPS) B.V. TNO Electronic Products & Services (EPS) B.V. is registered at the Chamber of Commerce in Groningen with no. 27247331. Return address: P.O. Box 15, 9822 ZG Niekerk, The Netherlands Telefication B.V. Attn.: W. Blom Edisonstraat 12a 6902 PK Zevenaar The Netherlands Dear Mr. Blom, Pursuant to section 0.457 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID: AEZCPE-310-200, to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than Sanyo Electric Co., Ltd. and TNO Electronic Products & Services (EPS) B.V.: 1. Bill of materials 2. Circuit diagram 3. Operational description 4. Block diagram The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, TNO Electronic Products & Services (EPS) B.V. P.A.J.M. Robben, B.Sc.E.E. Director

1. Body: Front View 2. Body: Back View 3. Body: Top View 4. Body: Bottom View 5. Body: Left-side View 6. Body: Right-side View 7. Body: Close-up of Label(Front)

1. Body: Front View 2. Body: Back View 3. Body: Top View 4. Body: Bottom View 5. Body: Left-side View 6. Body: Right-side View 7. Body: Close-up of Label(Front)

AEZCPE-310-200 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) This device may not cause harmful interference, and ( 2 ) This device must accept any interference received, including interference that may cause undesired operation. 200

FCC ID: AEZCPE-310-200 Label location: the label is located at the bottom of the device.

1. Inside view Left: Cabinet front Right: IDU board 2. Cabinet back 3. IDU board(front view) 4. IDU board (back view)

1. Inside view Left: Cover RF Right: Shield RF (center) 2. Inside view Left: Shield RF Right: RF board (center) 3. Inside view Top: Cabinet front Under: BB board 4. Cabinet back

5. RF board(front view) 6. RF board (back view) 7. BB board(front view) 8. BB board(back view)

Declaration on radiation safety standard conformance To whom it may concern: Sanyo Electric Co., Ltd. 1-1 Sanyo-cho Daito City Osaka 574-8534 Japan declares that the following product FCC ID : AEZCPE-310-200 Model number : CPE-310-200 Description : W-CDMA Subscriber Terminal Equipment class : PCS Licensed Transmitter has a maximum e.i.r.p. of 30.7 dBm (1175 mW) in the frequency range of 1850 - 1910 MHz. The prediction of the power density at 20 cm distance of the radiating structures of the product can be calculated as follows (in accordance with OET Bulletin 65 (edition 97-01), page 19, equation 4): EIRP S = 4*π * R 2 EIRP 1175 mW S = 4*π*R 2 = 4 *π*(20cm) 2 = 0.23 mW/cm 2 (limit = 1.0 mW/cm 2 ) This means that the product as defined above fulfills the requirements on power density for general population/uncontrolled exposure with reference to table 1 (B) of 47 CFR Part 1.1310 where the limit for power density in the frequency range of 1.5 - 100.0 GHz has been set to 1.0 mW/cm 2 .

Sanyo Testing Laboratory Co., Ltd. 7-3-2 Higashimachi, Ibukidai, Nishi-ku Kobe-city, Hyogo Prefecture 651-2242 Japan Telephone: +81 78 993 1062 Telefax: +81 78 993 1097 Project number: 05111401.r02 Page 1 of 34 TEST REPORT OF A W-CDMA SUBSCRIBER TERMINAL, MODEL CPE-310-200, BRAND SOMA NETWORKS, IN ACCORDANCE WITH 47 CFR PART 24, SUBPART E (2004-10-01). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.r02 Page 2 of 34 MEASUREMENT/TECHNICAL REPORT Sanyo Electric Co., Ltd. Model : CPE-310-200 FCC ID: AEZCPE-310-200 December 5, 2005 This report concerns: Original grant/certification Class 2 change Verification Equipment type: PCS licensed transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii) ? Yes No Report prepared by: Company name : Sanyo Testing Laboratories Co., Ltd. Address : 7-3-2 Higashimachi, Ibukidai, Nishi-ku Postal code/city : Kobe-city, Hyogo Prefecture, 651-2242 Mailing address : - Postal code/city : - Country : Japan Telephone number : +81 78 993 1062 Telefax number : +81 78 993 1097 The data taken for this test and report herein was done in accordance with 47 CFR Part 24, Subpart E (broadband PCS) and the measurement procedures of ANSI C63.4: 2003. Sanyo Testing Laboratories Co., Ltd. at Kobe-city, Japan, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: December 5, 2005 Signature: H. Wada Sanyo Testing Laboratories Co., Ltd. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.r02 Page 3 of 34 Description of test item Test item : W-CDMA subscriber terminal Manufacturer : Sanyo Electric Co., Ltd. Brand : SOMA Networks Model : CPE-310-200 Serial numbers : - Revision : - Receipt number : 1 Receipt date : November 22, 2005 Applicant information Applicant's representative : Mr. O. Shimizu Company : Sanyo Electric Co., Ltd. Address : 1-1 Sanyo-cho Daito City Postal code : 574-8534 City : Osaka PO-box : - Postal code : - City : - Country : Japan Telephone number : +81 72 870 6532 Telefax number : +81 72 870 6597 Test(s) performed Location : Kobe-city Test(s) started : November 22, 2005 Test(s) completed : November 25, 2005 Purpose of test(s) : Type approval / certification Test specification(s) : 47 CFR Part 24, subpart E (2004-10-01) Test engineer(s) : T. Fujiwara K. Yakamoto I. Nakajo : Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.r02 Page 4 of 34 Table of contents 1 General information ...............................................................................................................................................................5 1.1 Product description.........................................................................................................................................................5 1.2 Related submittal(s) and/or Grant(s) ..............................................................................................................................5 1.3 Tested system details......................................................................................................................................................5 1.4 Test methodology ...........................................................................................................................................................6 1.5 Test facility.....................................................................................................................................................................6 1.6 Product labeling..............................................................................................................................................................6 1.7 System test configuration ...............................................................................................................................................7 1.7.1 Justification ............................................................................................................................................................7 1.7.2 EUT exercise software ...........................................................................................................................................7 1.8 Special accessories .........................................................................................................................................................7 1.9 Equipment modifications................................................................................................................................................7 1.10 Configuration of the tested system .................................................................................................................................7 1.11 Block diagram(s) of the EUT .........................................................................................................................................7 2 Transmitter tests .....................................................................................................................................................................8 2.1 RF output power (conducted) .........................................................................................................................................8 2.1.1 Test results...........................................................................................................…

Text truncated - open the document above for the full version.

Sanyo Testing Laboratory Co., Ltd. 7-3-2 Higashimachi, Ibukidai, Nishi-ku Kobe-city, Hyogo Prefecture 651-2242 Japan Telephone: +81 78 993 1062 Telefax: +81 78 993 1097 Project number: 05111401.p01 Page 1 of 12 47 CFR PART 24E TEST SETUP PHOTOGRAPHS OF A W-CDMA SUBSCRIBER TERMINAL (PCS LICENSED TRANSMITTER), BRAND SOMA NETWORKS, MODEL CPE-310-200. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 2 of 12 Description of test item Test item : W-CDMA subscriber terminal Manufacturer : Sanyo Electric Co., Ltd. Brand : SOMA Networks Model : CPE-310-200 Serial numbers : - Revision : - Receipt number : 1 Receipt date : November 22, 2005 Applicant information Applicant's representative : Mr. O. Shimizu Company : Sanyo Electric Co., Ltd. Address : 1-1 Sanyo-cho Daito City Postal code : 574-8534 City : Osaka PO-box : - Postal code : - City : - Country : Japan Telephone number : +81 72 870 6532 Telefax number : +81 72 870 6597 This report shall not be reproduced, except in full, without the written permission of Sanyo Testing Laboratory Co., Ltd. The test results relate only to the item(s) tested. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 3 of 12 Table of contents 1 Radiated emission test setup...................................................................................................................................................4 1.1 Radiated emission test setup (front). ..............................................................................................................................4 1.2 Radiated emission test setup (back)................................................................................................................................5 1.3 RF output power (eirp) measurement test setup. ............................................................................................................6 2 Conducted emission test setup................................................................................................................................................8 2.1 Conducted emission test setup (front). ...........................................................................................................................8 2.2 Conducted emission test setup (back). ...........................................................................................................................9 3 Conducted RF measurements test setup. ..............................................................................................................................10 3.1 RF output power measurement test setup. ....................................................................................................................10 3.2 Occupied bandwidth measurement test setup...............................................................................................................11 3.3 Frequency stability measurement test setup. ................................................................................................................12 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 4 of 12 1 Radiated emission test setup. 1.1 Radiated emission test setup (front). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 5 of 12 1.2 Radiated emission test setup (back). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 6 of 12 1.3 RF output power (eirp) measurement test setup. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 7 of 12 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 8 of 12 2 Conducted emission test setup. 2.1 Conducted emission test setup (front). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 05111401.p01 Page 9 of 12 2.2 Conducted emission test setup (back). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal (PCS licensed transmitter Sanyo Electric Co., Ltd. SOMA Networks CPE-310-200 AEZCPE-310-200 Project number: 051…

Text truncated - open the document above for the full version.