AEZCPE-400-2C0W-CDMA subscriber terminal

1 SOMAPORT USER GUIDE Part S1AH6P1P0006-- revision A 2 3 Preface .......................................................................................... 9 Important Safety Instructions ................................................. 11 Regulatory Notices ................................................................ 15 Introduction ............................................................................... 21 Overview ............................................................................... 22 The Front Panel ..................................................................... 23 The Back Panel ..................................................................... 25 The Internal Antenna .............................................................. 27 Installing the SOMAport ...................................................... 29 Unpacking the SOMAport ...................................................... 30 Choose the Best Location ..................................................... 31 Connecting the Power Supply and Powering on the SOMAport ............................................ 32 Connecting a Computer via Ethernet ..................................... 34 Connecting a Computer via USB (Optional) ........................... 35 Connecting Telephones to SOMAport ................................... 37 Activating Service .................................................................. 42 Connecting Multiple Computers ...................................... 43 Overview ............................................................................... 44 Using an Ethernet Hub .......................................................... 45 Using an Internet Router ........................................................ 46 CONTENTS CONTENTS 4 Troubleshooting ...................................................................... 47 Finding Causes of Computer Problems ................................. 48 Finding Causes of Telephone Problems ................................. 50 The Signal is Weak ................................................................ 52 There is a Fault Condition ...................................................... 54 The SOMAport is Not Receiving Power ................................. 55 There is a Problem with the Ethernet or USB Cabling ............ 56 There is a Problem with the USB Port Settings ...................... 58 The Computer Uses an Old Dial-up Connections ................... 59 Internet Explorer LAN Settings are Incorrect .......................... 61 Ethernet Network Settings are Incorrect ................................ 62 IP Address Needs to be Renewed ......................................... 72 Specifications ......................................................................... 75 Index ............................................................................................ 77 COPYRIGHT 5 SOMA NETWORKS INC. ENDUSER PRODUCT LICENSE AGREEMENT THE SOMAPORT™ SUBSCRIBER STATION AND PROVIDED SOFTWARE CONTAIN CERTAIN COMPUTER PROGRAMS AND OTHER PROPRIETARY MATERIAL OF SOMA NETWORKS, INC. OR LICENSED TO SOMA NETWORKS, INC., THE USE OF WHICH IS SUBJECT TO THIS AGREEMENT. BY: (A) SIGNING AN AGREEMENT FOR SERVICE WITH YOUR SERVICE PROVIDER; (B) OPENING THE SEALED ENVELOPE CONTAINING THE SOMAPORT; OR (C) USING THE SOMAPORT, YOU ASSENT TO AND ACCEPT THIS ENDUSER PRODUCT LICENSE AGREEMENT. IF YOU DO NOT AGREE WITH ALL THE TERMS OF THIS AGREEMENT YOU MUST RETURN THIS PRODUCT (WITH THE ENVELOPE STILL SEALED), ALL MANUALS AND DOCUMENTATION, ANY SOFTWARE PACK- AGES PROVIDED WITH THE SOMAPORT AND PROOF OF PAYMENT TO THE PLACE YOU OBTAINED THEM FOR A FULL REFUND WITHIN THIRTY (30) DAYS OF FIRST ACQUIRING THE SOMAPORT, OTHERWISE YOU ARE DEEMED TO HAVE ACCEPTED AND AGREED TO THESE TERMS AND CONDITIONS. UNAUTHORIZED REPRODUCTION, DISTRIBUTION, DECOMPILATION OR OTHER REVERSE ENGINEERING OF THIS PRODUCT INCLUDING ITS HARDWARE AND/OR SOFTWARE, OR ANY PORTION OF IT, IS PROHIBITED AND MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW. 1. GRANT OF LICENSE: Subject to the terms of this Enduser Product License Agreement (the "Agreement"), SOMA Networks, Inc. ("SOMA") grants you (the "Licensee") a non-sub-licensable, non-exclusive right ("License") to use the Product. "Product" means, collectively, the Software and the provided hardware, and specifically the SOMAport™ subscriber station and its accessories, if any, together with documentation provided to you by SOMA or your service provider. "Software" means, collectively, the version of the SOMA software program in object code format and all updates to that program distributed to you by SOMA, directly or indirectly, by any means and includes any firmware provided to you with the Product. You have no right, unless otherwise explic- itly permitted, to receive any source code or design documentation relating to the Product. SOMA retains ownership of all Software copies. The Software and this License is only provided to you to be used in conjunction with the SOMAport provided to you by SOMA or your service provider when you subscribed to services that utilize the SOMA wireless air interface technology and is not licensed to you to be used for any other purpose. 2. RESTRICTIONS: Except as reasonably required to use the Product strictly in accordance with the License and this Agreement, you may not copy any Software. Licensee shall not (and shall not allow any third party to): (I) decompile, disassemble, or otherwise reverse engineer or attempt to reconstruct or discover any source code or underlying ideas or algorithms or file formats or pro- gramming or interoperability interfaces of the Product by any means whatsoever; (II) remove any Product identification, copyright or other notices; (III) modify, incorporate into or with other software or create a derivative work of any part of the Software or Product; or (IV) modify or other…

Text truncated - open the document above for the full version.

Power Supply Cord The power supply cord is the disconnect device. Ensure that the socket outlet is installed near the equipment and can be easily accessed. Telephone Line Cord To reduce the risk of fire, use only No. 26 AWG or larger telephone line cord. ERRATA (SP4 User Guide) P 12 P 26 P 33 Copyright 2007 SOMA Networks, Inc. All Rights Reserved. W A R N I N G : To reduce the risk of fire, use only No. 26 AWG or larger telephone line cord to connect to the telephone jacks on the SOMAport. WARNING: The power supply cord is the disconnect device. Ensure that the socket outlet is installed near the equipment and can be easily accessed. WARNING: Telephone jacks on the SOMAport are for connecting the telephones only. Do not connect the telephone line cord from these jacks to the public telephone network. Otherwise, you may pose a risk of electric shock or electrocution.  Supplementary to “Important Safety Instruction”:  Supplementary to “The Back Panel” section: P 38  Supplementary to “Connection Telephones to SOMAport” section:  Supplementary to “Connecting the Power Supply and Powering on the SOMAport” section: P 75  Supplementary to “Internal antenna” specification Inernal antenna gain: 0.36 dBi (700MHz) 3.0 dBi (Other frequencies)  Part S1AH6P1P0018-- Rev _

Telefication B.V. Attn.: M. Koop Edisonstraat 12a 6902 PK Zevenaar The Netherlands Date: June 6, 2007 Dear Mr. Koop Pursuant to section 0.457 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID: AEZCPE-400-2C0, to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than Sanyo Electric Co., Ltd.: 1. Bill of materials 2. Circuit diagram 3. Operational description 4. Block diagram The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Yours sincerely, O. Shimizu Sanyo Electric Co., Ltd. 1-1 Sanyo-cho Daito City Osaka 574-8534 Japan Telephone: +81 72 870 6532 Telefax: +81 72 870 6597

1 SOMAPORT400 CPE-400-2C0 Outside Perspective View Outside Perspective View (1) Outside Perspective View (2) 2 SOMAPORT400 CPE-400-2C0 Outside Front, Back view Outside Front View Outside Back View 3 SOMAPORT400 CPE-400-2C0 Outside Left, Right view Outside Left View Outside Right View 4 SOMAPORT400 CPE-400-2C0 Outside Top, Bottom view Outside Top View Outside Bottom View Rating Label View Regulatory Label View

1 SOMAPORT400 CPE-400-2C0 Inside Perspective View Inside Perspective View (1) Inside Perspective View(2 ) 2 SOMAPORT400 CPE-400-2C0 Inside Chassis Front, Back view Inside Chassis Front View Inside Chassis Back View 3 SOMAPORT400 CPE-400-2C0 Inside Chassis Left, Right view Inside Chassis Left View Inside Chassis Right View 4 SOMAPORT400 CPE-400-2C0 Inside Chassis Top, Bottom view Inside Chassis Top View Inside Chassis Bottom View

SOMAPORT400 CPE-400-2C0 Inside Chassis BB View Inside Chassis BB Board Perspective View (1) Inside Chassis BB Board Perspective View(2) Inside Chassis BB Board Exploded View (1) Inside Chassi s BB Board Exploded View(2) SOMAPORT400 CPE-400-2C0 BB Board View BB Board View (C-side) BB Board View (S-side)

SOMAPORT400 CPE-400-2C0 RF Board View RF Board View (C-side) RF Board View (S-side) Inside Chassis RF Board Exploded View

Declaration on radiation safety standard conformance To whom it may concern: Sanyo Electric Co., Ltd. 1-1 Sanyo-cho Daito City Osaka 574-8534 Japan declares that the following product FCC ID : AEZCPE-400-2C0 Model number : CPE-400-2C0 Description : W-CDMA Subscriber Terminal Equipment class : Licensed non-broadcast station transmitter has a maximum e.r.p. of 25.1 dBm (324 mW) in the frequency range of 698 - 716 MHz. The prediction of the power density at 20 cm distance of the radiating structures of the product can be calculated as follows (in accordance with OET Bulletin 65 (edition 97-01), page 19, equation 4): S = EIRP / (4*π * R 2 ) S = EIRP / (4* π *R 2 ) = 324 mW / (4 * π *(20cm) 2 ) = 0.064 mW/cm 2 (limit = 0.48 mW/cm 2 ) This means that the product as defined above fulfills the requirements on power density for general population/uncontrolled exposure with reference to table 1 (B) of 47 CFR Part 1.1310 where the limit for power density in the frequency range of 300 ñ 1500 MHz has been set to f/1500 mW/cm 2 ( = 716/1500 mW/cm 2 = 0.48 mW/ cm 2 ).

Sanyo Electric Co., Ltd. Testing Laboratory 7-3-2 Higashimachi, Ibukidai, Nishi-ku Kobe-city, Hyogo Prefecture 651-2242 Japan Telephone: +81 78 993 1062 Telefax: +81 78 993 1097 Project number: 07052501.r01 Page 1 of 37 TEST REPORT OF A W-CDMA SUBSCRIBER TERMINAL, MODEL CPE-400-2C0, BRAND SOMA NETWORKS, IN ACCORDANCE WITH 47 CFR PART 27 (2006-10-01). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE –400-2C0 AEZCPE-400-2C0 Project number: 07052501.r01 Page 2 of 37 MEASUREMENT/TECHNICAL REPORT Sanyo Electric Co., Ltd. Model : CPE-400-2C0 FCC ID: AEZCPE-400-2C0 May 24, 2007 This report concerns: Original grant/certification Class 2 change Verification Equipment type: Licensed non-broadcast station transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii) ? Yes No Report prepared by: Company name : Sanyo Electric Co., Ltd. Testing Laboratory Address : 7-3-2 Higashimachi, Ibukidai, Nishi-ku Postal code/city : Kobe-city, Hyogo Prefecture, 651-2242 Mailing address : - Postal code/city : - Country : Japan Telephone number : +81 78 993 1062 Telefax number : +81 78 993 1097 The data taken for this test and report herein was done in accordance with 47 CFR Part 27 (Miscellaneous Wireless Communications Services) and the measurement procedures of ANSI C63.4: 2003. Sanyo Electric Co., Ltd. Testing Laboratory at Kobe-city, Japan, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: May 24, 2007 Signature: H. Wada Sanyo Electric Co., Ltd. Testing Laboratory Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE –400-2C0 AEZCPE-400-2C0 Project number: 07052501.r01 Page 3 of 37 Description of test item Test item : W-CDMA subscriber terminal Manufacturer : Sanyo Electric Co., Ltd. Brand : SOMA Networks Model : CPE-400-2C0 Serial numbers : 1307200041 Revision : - Receipt number : 1 Receipt date : May 17, 2007 Applicant information Applicant's representative : Mr. O. Shimizu Company : Sanyo Electric Co., Ltd. Address : 1-1 Sanyo-cho Daito City Postal code : 574-8534 City : Osaka PO-box : - Postal code : - City : - Country : Japan Telephone number : +81 72 870 6532 Telefax number : +81 72 870 6597 Test(s) performed Location : Kobe-city Test(s) started : May 17, 2007 Test(s) completed : May 21, 2007 Purpose of test(s) : Type approval / certification Test specification(s) : 47 CFR Part 27 (2006-10-01) Test engineer(s) : K. Yamamoto Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE –400-2C0 AEZCPE-400-2C0 Project number: 07052501.r01 Page 4 of 37 Table of contents 1 General information ...............................................................................................................................................................5 1.1 Product description.........................................................................................................................................................5 1.2 Related submittal(s) and/or Grant(s) ..............................................................................................................................5 1.3 Tested system details......................................................................................................................................................5 1.4 Test methodology ...........................................................................................................................................................6 1.5 Test facility.....................................................................................................................................................................6 1.6 Product labeling..............................................................................................................................................................6 1.7 System test configuration ...............................................................................................................................................7 1.7.1 Justification ............................................................................................................................................................7 1.7.2 EUT exercise software ...........................................................................................................................................7 1.8 Special accessories .........................................................................................................................................................7 1.9 Equipment modifications................................................................................................................................................7 1.10 Configuration of the tested system .................................................................................................................................7 1.11 Block diagram(s) of the EUT .........................................................................................................................................7 2 Transmitter tests .....................................................................................................................................................................8 2.1 RF output power (conducted) .........................................................................................................................................8 2.1.1 Test results..............................................................................................................................................................8 2.2 RF outpu…

Text truncated - open the document above for the full version.

SANYO Testing Lab. 22 May,2007 15:29<<Conducted Emission>> Standard: FCC Class BModel: CPE-400-2C0 Serial No.: 1307200041 Operator: H.Izuka AC Mains: 120V,60Hz Temp ,Humid: 28°C,38%,1004hPa Remark1: Remark2: Remark3: Remark4: 0.15030.0000.5001.0005.00010.000 0 90 10 20 30 40 50 60 70 80 Frequency Level [MHz] [dB(μV)] <FCC Class B> Standard （QP) Standard (AV) <CPE-400-2C0> Final Result-QP(N) Final Result-AV(N) Final Result-QP(L1) Final Result-AV(L1) Final Result --- N Phase --- No. Frequency Reading Reading c.f Result Result Limit Limit Margin Margin QP AV QP AV QP AV QP AV [MHz] [dB(μV)] [dB(μV)] [dB] [dB(μV)] [dB(μV)] [dB(μV)] [dB(μV)] [dB] [dB] 1 0.195 38.5 27.9 10.1 48.6 38.0 63.8 53.8 15.2 15.8 2 0.259 28.9 19.3 10.1 39.0 29.4 61.5 51.5 22.5 22.1 3 0.453 27.9 26.7 10.2 38.1 36.9 56.8 46.8 18.7 10.0 4 0.712 25.0 23.9 10.2 35.2 34.1 56.0 46.0 20.8 11.9 5 1.232 26.7 22.2 10.2 36.9 32.4 56.0 46.0 19.1 13.6 6 2.844 23.0 19.6 10.4 33.4 30.0 56.0 46.0 22.6 16.0 --- L1 Phase --- No. Frequency Reading Reading c.f Result Result Limit Limit Margin Margin QP AV QP AV QP AV QP AV [MHz] [dB(μV)] [dB(μV)] [dB] [dB(μV)] [dB(μV)] [dB(μV)] [dB(μV)] [dB] [dB] 1 0.194 40.0 29.6 10.1 50.1 39.7 63.9 53.9 13.8 14.2 2 0.260 30.3 19.6 10.1 40.4 29.7 61.4 51.4 21.0 21.7 3 0.454 28.6 27.6 10.2 38.8 37.8 56.8 46.8 18.0 9.0 4 0.649 25.2 24.3 10.2 35.4 34.5 56.0 46.0 20.7 11.6 5 1.232 27.3 23.9 10.2 37.5 34.1 56.0 46.0 18.5 11.9 6 3.936 23.7 16.1 10.5 34.2 26.6 56.0 46.0 21.8 19.4

Sanyo Electric Co., Ltd. Testing Laboratory 7-3-2 Higashimachi, Ibukidai, Nishi-ku Kobe-city, Hyogo Prefecture 651-2242 Japan Telephone: +81 78 993 1062 Telefax: +81 78 993 1097 Project number: 07052501.p01 Page 1 of 14 47 CFR PART 27 TEST SETUP PHOTOGRAPHS OF A W-CDMA SUBSCRIBER TERMINAL (LICENSED NON- BROADCAST STATION TRANSMITTER), BRAND SOMA NETWORKS, MODEL CPE-400-2C0. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 2 of 14 Description of test item Test item : W-CDMA subscriber terminal Manufacturer : Sanyo Electric Co., Ltd. Brand : SOMA Networks Model : CPE-400-2C0 Serial numbers : 1307200041 Revision : - Receipt number : 1 Receipt date : May 17, 2007 Applicant information Applicant's representative : Mr. O. Shimizu Company : Sanyo Electric Co., Ltd. Address : 1-1 Sanyo-cho Daito City Postal code : 574-8534 City : Osaka PO-box : - Postal code : - City : - Country : Japan Telephone number : +81 72 870 6532 Telefax number : +81 72 870 6597 This report shall not be reproduced, except in full, without the written permission of Sanyo Electric Co., Ltd. Testing Laboratory The test results relate only to the item(s) tested. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 3 of 14 Table of contents 1 Radiated emission test setup...................................................................................................................................................4 1.1 Radiated emission test setup 30-1GHz (front)................................................................................................................4 1.2 Radiated emission test setup 30-1GHz (back)................................................................................................................5 1.3 Radiated emission test setup 1-8GHz .............................................................................................................................6 1.4 RF output power (erp) measurement test setup. .............................................................................................................8 2 Conducted emission test setup..............................................................................................................................................10 2.1 Conducted emission test setup (front). .........................................................................................................................10 2.2 Conducted emission test setup (Side). ..........................................................................................................................11 3 Conducted RF measurements test setup. ..............................................................................................................................12 3.1 RF output power measurement test setup. ....................................................................................................................12 3.2 Occupied bandwidth measurement test setup...............................................................................................................13 3.3 Frequency stability measurement test setup. ................................................................................................................14 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 4 of 14 1 Radiated emission test setup. 1.1 Radiated emission test setup 30-1GHz (front). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 5 of 14 1.2 Radiated emission test setup 30-1GHz (back). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 6 of 14 1.3 Radiated emission test setup 1-8GHz Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 7 of 14 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 8 of 14 1.4 RF output power (erp) measurement test setup. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 9 of 14 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 10 of 14 2 Conducted emission test setup. 2.1 Conducted emission test setup (front). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 11 of 14 2.2 Conducted emission test setup (Side). Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 12 of 14 3 Conducted RF measurements test setup. 3.1 RF output power measurement test setup. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscriber terminal Sanyo Electric Co., Ltd. SOMA Networks CPE-400-2C0 AEZCPE-400-2C0 Project number: 07052501.p01 Page 13 of 14 3.2 Occupied bandwidth measurement test setup. Description of EUT: Manufacturer: Brand mark: Model: FCC ID: W-CDMA subscrib…

Text truncated - open the document above for the full version.