AEZSCP-600Single-Mode Cellular CDMA Phone

i Safety Information: FCC RF Exposure Information WARNING! Read this information before using your phone In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96- 326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. CAUTION Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations with the back of the phone kept 0.40 inches (1.0cm) from the body. To maintain compliance with FCC RF exposure guidelines, use only belt-clips, holsters or similar accessories that maintain a separation distance of 0.40 inches (1.0cm) between the user’s body and the back of the phone, including the antenna, whether extended or retracted. The use of third-party belt-clips, holster and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure guidelines, and should be avoided. Note: For more information about RF exposure, please visit the FCC website at www.fcc.gov

Applicant: SANYO Electric Co., Ltd. Transmitter Type: AEZSCP-600 SANYO Electric Co., Ltd. Multimedia Company 70-6268 Personal Telecommunication Div. l-1 Sanyo-Cho, Daito City, Osaka, Japan TEL:(81) 720- FAX: (81) 720-70-6084 AFFIDAVIT I hereby certify that transceiver FCC ID: AEZSCP-600 manufactured by SANYO Electric Co., Ltd.. complies with all requirements of Part 22 Subpart H of the FCC Rules. SANYO Electric Co., Ltd. Multimedia Company Personal Telecommunication Division l-l Sanyo-Cho Daito City, Osaka, Japan Date: April 11, 2001 Eiji Kotobuki President Multimedia Company SANYO Electric Co., Ltd. Multimedia Company Personal Telecommunication Div. l-l Sanyo-Cho,Daito City,Osaka,Japan TEL: (81) 72-870-6288 FAX: (81) 72-870-6084 April 11, 2001 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: SANYO ELECTRIC CO., LTD. FCC ID: AEZSCP-600 FCC E911 Requirements Per S22.921 Gentlemen: Sanyo Electric .Co., Ltd. hereby certifies that the cellular telephone (FCC ID: AEZSCP-600), using the Automatic A/B Roaming - Intelligent Retry method, meets the E911 requirements specified in Section 22.921 of the FCC Rules. This procedure recognizes when a "9-l-l" call is made and, at such time, will override any programming in the mobile unit that determines the handling of a non-911 call and permit the call to be handled by other analog carriers. Should you have any questions or comments concerning the above, please contact the undersigned. Hiromu Tokumatsu Manager Technical Engineering Department Personal Telecommunication Division Multimedia Company SANYO Electric Co., Ltd.

April 10, 2001 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: SANYO ELECTRIC CO., LTD FCC ID: AEZSCP-600 Part 22 Certification Gentlemen: Attached herewith, on behalf of SANYO ELECTRIC CO., LTD. is an application for Part 22.901(d) Certification of the following Single-Mode Cellular CDMA Phone: FCC ID: AEZSCP-600 TRADE / MODEL(s): SANYO AEZSCP-600 EUT TYPE: Licensed Portable Transmitter Held to Ear (PCE) Tx Freq. Range: 824.70 – 848.31 MHz (CDMA) Rx Freq. Range: 869.70 – 893.31 MHz (CDMA) Max. RF Output Power: 0.374 W ERP CDMA (25.727 dBm) Attached is the applicant’s Letter of Authorization, Confidentiality Request, measurement report data and plots, RF Exposure measurement report, FCC ID label and location, test setup photographs, internal and external photographs, block diagrams (confidential), schematic diagrams (confidential), operational description, parts list & tune-up procedure, and the user's manual. Should you have any questions or comments concerning the above, please contact the undersigned. cc: Mr. Koichi Takahashi V.P. Marketing SANYO Fisher (USA) Corporation

May 18, 2001 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Joe Dichoso SUBJECT: Sanyo Electric Co., Ltd. FCC ID: AEZSCP-600 731 Confirmation No.: EA100721 Correspondence Reference No.: 19322 Request for Tech. Info.: 05/18/2001 Dear Joe: Transmitted herewith, on behalf of Sanyo Electric Co., Ltd., is an amendment provided in response to the request for technical information dated May 18, 2001. 1. Please find attached the revised Block Diagram. 2. Please find attached the Dipole Validation exhibits. We trust this information is sufficient to issue the grant as soon as possible. If you have any further questions, please do not hesitate to contact us. cc: Sanyo Electric Co., Ltd.

June 5, 2001 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Joe Dichoso SUBJECT: Sanyo Electric Co., Ltd. FCC ID: AEZSCP-600 731 Confirmation No.: EA100721 Correspondence Reference No.: 19337 Request for Tech. Info.: 05/31/2001 Dear Joe: Transmitted herewith, on behalf of Sanyo Electric Co., Ltd., is an amendment provided in response to the request for technical information dated May 31, 2001. 1. We would like to confirm that the 1cm spacing is in reference to the outer diameter of the base of the antenna. We trust this information is sufficient to issue the grant as soon as possible. If you have any further questions, please do not hesitate to contact us. cc: Sanyo Electric Co., Ltd.

© 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone

© 2001 PCTEST Lab FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §§ 2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. (SEE NEXT PAGE)

© 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone

Applicant: SANYO Electric CO., LTD. Transmitter Type: AEZSCP-600 EXHIBIT xx 1 / 3 TECHNICAL DESCRIPTION This transmitter has been specially designed for the Domestic Cellular Radiotelephone Communication Service (CDMA). [CDMA mode] The rated maximum power output for CDMA is 0.236 watts with the capability of reducing the maximum power in a step of 1 dB on command from the base station. The transmitter output is confirmed correspond to the received power level of the mobile station. Each power level is maintained within +2 /-4 dB of its nominal level over the temperature range from –30 to +60 degrees centigrade and +14/ –14% change of the supply voltage. This transmitter operates in the frequency range of 824.700 MHz to 848.310 MHz. The frequencies are generated by Phase Locked Loop Frequency Synthesizers, which are controlled by the closest base station in the system. The handset causes the frequency stability of carrier according to the frequency from the base station to become less than + 300 Hz. The transmitter is equipped with a voice processor and a Code. The Code (IC211) samples a voice signal and a Voice processor, which is included in MSM (Mobile Subscriber Modem) (IC211 ), codes 8K (EVRC) or 13K voice data packet. And MSM formats the modulated signals with a voice data packet. The modulation is the Quadrature modulation. The I and Q signals are shaped by the filters whose function is included in MSM. The D/A Converters, which are included in IC 211, generate analog I and Q signals. The low pass filters shape the analog I and Q signals to limit Band width 1.25MHz. The carrier frequency of transmitter is generated by a TX PLL (Phase Locked Loop) circuit and a local PLL circuit. TX PLL circuit consists of a VCO (CM4), a frequency synthesizer IC (IC141), a loop filter, and a reference frequency oscillator (TCXO). The TX UP mixer is incorporated in the TX Control IC (IC132). The local PLL circuit consists of a VCO included in IC123, the frequency synthesizer IC (IC141), the Applicant: SANYO Electric CO., LTD. Transmitter Type: AEZSCP-600 EXHIBIT xx 2 / 3 loop filter, and the reference frequency oscillator. The TX up mixer is in the TX control IC (IC132). For the TCXO system, see TCXO section. Each Frequency Synthesizer IC (IC141, IC123) has a programmable divider, a reference divider, a phase comparator, and a change pump. The programmable divider of XF141, which is controlled by MSM (IC211) included CPU, provides a signal to the phase comparator by dividing an output of the VCO (X1402). The programmable divider of IC123 is a fixed divider and it provides a signal to the phase comparator by dividing the VCO frequency the fixed number. The reference divider provides a reference signal to the phase comparator by dividing an output of the TCXO system. The phase comparator controls a frequency of the VCO through the charge pump and Loop filter so that the phase of the signal from the programmable divider corresponds to the phase of the reference signal. The frequency of the VCO (X1402) for RF-PLL and the VCO (in IC123) for IF PLL, and the TCXO system stability are controlled by MSM3100. The baseband signal is generated by mixing with the TX_IF- PLL output on the TX control (IC132), and provided to the Buffer Amp. (IC142) through a bandpass filter. The power amplifier circuit, which consists of a Power Amp. (IC131), the bandpass filter, a Duplexer (XF132, XF111), and the power control circuit, amplifies the output from the Driver Amp. of IC132 and provides at least (MAX) 25.8 dB output. The output of the power amplifier (IC131) is connected to a duplexer, an isolator and a separator. The SW is connected to an antenna terminal and an external connector RF terminal. The signal (ANT_EXT) from MSM3100 decides which path is appropriate to be output. The output of the power amplifier provides adequate margin to compensate for losses in the duplexer, the isolator, the separator and the SW. The Power Control circuit consists the HDET, an AGC (Auto Gain Control) circuit included in the TX control IC (IC132), an AD converter included in IC211, and a TX control circuit included in MSM3100. The Power Amp output level, which is detected by HDET is converted into the digital data by the AD converter included in Applicant: SANYO Electric CO., LTD. Transmitter Type: AEZSCP-600 EXHIBIT xx 3 / 3 IC15, and is loaded into MSM3100. The TX power level is confirmed according to the RX power level and a command from the base station. The MSM3100 detects the RX power level in IC and generates an AGC signal corresponding to the TX power level, and adjusts the signal according to a command from the base station and a read value of HDET, and then provides it into the AGC circuit in IC132. The TX power level of the transmitter is controlled by changing the Amplitude of the output power level in AGC circuit according to the AGC control voltage value. IC211 (MSM3100) continuously monitors the power output at the output of HDET. The above is used to adjust the maximum TX power. An AGC value is modified by a monitor value, and it doesn’t exceed a set TX LIMIT value. The transmitter is controlled by a signal from the MSM3100. The TX control IC (IC132), the frequency synthesizer IC (IC141, IC123) and Power Amp is enabled. The TCXO system The TCXO system contains of TCXO module (X1401) and Auto Frequency Control block. The frequency of the TCXO module is 19.68 MHz with stability less than ±2ppm over the temperature range of –30 to +80 degrees Centigrade. The frequency of TCXO module can be controlled by AFC (Auto Frequency Control) circuit block which Mobile station Modem (IC401) includes, so that the receiving frequency agrees with the base station transmit frequency. The frequency stability of TCXO system is maintained within + 300 Hz over the temperature range of –30 to +60 degrees Centigrade.

Reference NoFunctionPart No MOBILE STATION MODEM IC211MOBILE STATION MODEMMSM3100A280FBGA-TR POWER & CHARGER CIRCUIT IC221Power & ChragerBH6030KN IC222ANOLOG SWITCHTC7S66FU or SN74AHC1G66H Q2203SWITCHING2SA1774 Q2204SWITCHING2SC4617 Q2202SWITCHINGHAT1043M SPEAKER AMP IC231SPEAKER AMPLM4864IMM Q2301SWITCHINGDTC124XE EARPHONE JACK SWITCH IC212Schmitt INVERTERTC7S14FU or SN74AHC1G14H or NC7S14 REAL TIME CLOCK IC281REAL TIME CLOCKRTC-8564NB MEMORY IC24164M FALSH/8M SRAMM6MG3D641S8TP Q2401SWITCHINGDTC114YE INTERFACE CIRCUIT Q2701SWITCHINGDTC124XM Q2702SWITCHINGDTC124XM Q2703SWITCHINGDTC124XM Q2704SWITCHINGDTC124XM Q2705SWITCHINGDTC124XM LCD MODULE LCD01MAIN LCD DriverHD66750 DESCPRIPTIVE INFORMATION DESCPRIPTIVE INFORMATIONDESCPRIPTIVE INFORMATION DESCPRIPTIVE INFORMATION Parts List Parts ListParts List Parts List Reference No.FunctionPart No. PLL Synthesizer IC 141PLL IC LMX2339L IC 142Low Current AmplifieruPG8128TB X 1402VCOENFVK192S15 XF 141DividerLDD15A030D0967 Transmitter IC 131Power AmplifierPA3100 IC 133Regulator(2.8V)R1140Q281D IC 135AND GATETC7SH08FU D 1301,1302DiodeHSC88 XF 111DuplexerEFSD836MB2Z1 XF 131IsolatorCE053R836DCB XF 132CouperLDC10B200J0836 XF 133RF SAW FilterTSM836AW3B Receiver IC 121LNAGN01096B IC 122MixerGN02037B XF 121RF SAW FilterSRF881NJC31 XF 122IF SAW FilterTMXM300 IF AGC Circuit IC 132TX AGC+Mixer ICRFT3100 IC 123RX AGC ICIFR3000 D 1201,1202,1303,1304DiodeHVC306A TCXO Circuit X 1401TCXO KT18-ECV30A-19.680M Q 1401Transistor2SC4649 CDMA-Mode RF Block/Parts List CDMA-Mode RF Block/Parts ListCDMA-Mode RF Block/Parts List CDMA-Mode RF Block/Parts List MODEL NO. SCP-600FCC USE ONIY FCC USE ONIYFCC USE ONIY FCC USE ONIY Ref NO. Description Ref NO. Description Ref NO. Description Ref NO. Description Ref NO. Description C1104 18PC1326 390PC1503 1UC2398 33P C1114 2PC1327 0.01UC2399 33P C1200 3.5PC1328 0.01UC2660 22P C1201 18PC1329 33PC2674 22P C1203 1000PC1331 33PC2675 22P C1204 0.01UC1332 7PC2676 1U C1205 1000PC1334 1000PC2677 1U C1206 1PC1335 390PC2678 1U C1207 1000PC1336 0.015UC2679 1U C1208 100PC1337 560PC2681 1U C1209 100PC1339 0.01UC2682 1U C1211 22PC1341 1000PC2683 0.47U C1212 1.5PC1342 0.01UC2684 0.47U C1214 11PC1343 1000PC2685 0.22U C1216 1000PC1344 100PC2686 0.22U C1217 1000PC1345 100PC2687 0.22U C1219 6PC1346 0.1UC2688 0.22U C1221 2PC1347 0.1UC2689 0.22U C1222 6PC1348 100PC2691 0.22U C1223 6PC1349 0.01UC2692 0.47U C1224 0.01UC1351 1UC2693 0.47U C1225 4700PC1352 100PC2694 0.47U C1226 0.01UC1353 100PC2696 0.1U C1228 1000PC1354 10UC2697 0.1U C1229 0.01UC1362 0.01UC2698 0.1U C1230 0.1UC1363 0.01UC2699 0.1U C1231 0.1UC1370 1U C1232 1000PC1371 1U C1233 1000PC1372 1U C1234 0.01UC1373 1U C1235 33PC1401 1000P C1236 4PC1402 1000P C1237 33PC1403 470P C1238 0.01UC1404 0.047U C1239 0.01UC1405 2700P C1241 0.01UC1406 0.01U C1242 120PC1407 10U C1251 0.01UC1408 0.01U C1252 0.01UC1409 0.01U C1260 4.7UC1410 0.01U C1301 12PC1411 1200P C1303 100PC1412 0.033U C1305 1UC1413 1000P C1306 0.1UC1414 1000P C1308 100PC1415 10U C1309 1000PC1416 1000P C1311 4PC1417 100P C1312 100PC1418 100P C1313 1000PC1419 100P C1314 0.01UC1420 0.01U C1315 0.1UC1421 1000P C1316 4700PC1422 1000P C1317 0.01UC1423 0.75P C1318 0.01UC1424 1U C1321 22PC1425 100P C1323 390PC1426 0.01U C1324 390PC1430 1000P C1325 390PC1431 18P CDMA-Mode RF Block/Parts List CDMA-Mode RF Block/Parts ListCDMA-Mode RF Block/Parts List CDMA-Mode RF Block/Parts List MODEL NO. SCP-600FCC USE ONIY FCC USE ONIYFCC USE ONIY FCC USE ONIY Ref NO. Description Ref NO. Description Ref NO. Description Ref NO. Description Ref NO. Description L1101 27nL2396 220n L1103 2.7nL2397 220n L1104 10nL2398 220n L1105 22nL2399 220n L1201 18n L1202 39n L1203 15n L1204 18n L1205 47n L1206 22n L1207 22n L1208 220n L1209 82n L1210 15n L1211 180n L1213 220n L1214 82n L1302 10n L1305 10n L1306 27n L1307 27n L1308 33n L1401 12n L1402 15n CDMA-Mode RF Block/Parts List CDMA-Mode RF Block/Parts ListCDMA-Mode RF Block/Parts List CDMA-Mode RF Block/Parts List MODEL NO. SCP-600FCC USE ONIY FCC USE ONIYFCC USE ONIY FCC USE ONIY Ref NO. Description Ref NO. Description Ref NO. Description Ref NO. Description Ref NO. Description R1108 0R2396 10 R1113 0R2397 10 R1201 0R2398 1k R1204 4.7kR2683 100k R1205 68R2684 150 R1206 680R2685 150 R1207 1kR2688 1k R1209 680R2689 330 R1211 620R2692 150 R1213 1kR2693 68 R1214 100R2694 150 R1219 4.7kR2695 68 R1221 10kR2696 150 R1222 10kR2697 68 R1301 56R2698 150 R1302 10kR2699 330 R1303 3.9kRB121 1kX4 R1304 1kRB122 1kX4 R1305 56kTH161 68k R1308 0 R1310 0 R1311 0 R1312 1k R1313 1k R1314 10k R1315 10k R1316 10k R1317 8.2k R1318 12k R1319 0 R1320 0 R1321 10k R1322 8.2k R1323 47 R1335 51k R1336 100k R1401 10k R1402 5.6k R1403 10k R1404 10k R1405 18 R1406 100 R1407 100 R1408 100 R1409 33 R1411 68 R1412 120k R1413 100k R1414 0 R1415 15k R1416 47k R1417 680 R1501 0 R1510 0 R1601 18k R1602 68k Restricted Distribution SCP-600/H.HK Adjustment Discription for Mass production. Model Code NO.1-163-298-00 Model NO.SCP-600/H.HK SANYO Telecommunications Corp. Over Sea Products Department Design Engineering Section 1 SANYO Telecommunications Corp. Technical Engineering Department RF Section. M.Ichi No.Contents 1.Set-Up for Tune-Up and Adjustment of Mobile Station 2.Alignment Procedure 3.Adjustment Value 4.Measurement Specification of Adjustment Minor Change Version NO.Draw/Change HistoryDraw/Change Contents Engineering Section Name SANYO Electric Co.,ltd. 1.-1 Set-Up for Tune-Up and Adjustment of TransmitterPage 2 PC-OUT/POWER-SUPPLY RF Cable *HP8924 Must be Calibrated before Adjustment. 1. Power on and setup to Config Menu (Shift + Test Key) 2. Setuop to Service Menu and Change to "TEMP_SENSE" of Voltmetor Connection. 3. 30 minutes after,Check of TEMP_SENSE Metor is stabilization or 0.5V(=50degree C) 4. Setup to Protocol is TSB-74 and RF CH std is "MS AMPS" SCP-600/H.HK Mobile Station5. Change to CDMA Screens and Change AVG Power mode to change to Chan Power mode Shieldbox6. Starting Calibration (About 3 Minutes:Transmitter tester calibration) GPIB Cotrol Cable…

Text truncated - open the document above for the full version.

SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- In; Crest Factor 1.0 SAR (1g): 1.26 mW/g, SAR (10g): 0.871 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.1013 [824.70MHz] Conducted Power = 24.6dBm Test Date -- 04/09/2001 SAR Tot [mW/g] 1.08E-1 3.23E-1 5.38E-1 7.53E-1 9.68E-1 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.23 mW/g, SAR (10g): 0.857 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.1013 [824.70MHz] Conducted Power = 24.6dBm Test Date -- 04/09/2001 SAR Tot [mW/g] 1.11E-1 3.32E-1 5.53E-1 7.75E-1 9.96E-1 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- In; Crest Factor 1.0 SAR (1g): 1.19 mW/g, SAR (10g): 0.823 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0383 [836.49MHz] Conducted Power = 24.6dBm Test Date -- 04/09/2001 SAR Tot [mW/g] 1.04E-1 3.12E-1 5.20E-1 7.29E-1 9.37E-1 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.26 mW/g, SAR (10g): 0.862 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0383 [836.49MHz] Conducted Power = 24.6dBm Test Date -- 04/09/2001 SAR Tot [mW/g] 1.16E-1 3.46E-1 5.78E-1 8.09E-1 1.04E+0 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- In; Crest Factor 1.0 SAR (1g): 1.34 mW/g, SAR (10g): 0.914 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0777 [848.31MHz] Conducted Power = 24.6dBm Test Date -- 04/09/2001 SAR Tot [mW/g] 1.21E-1 3.64E-1 6.07E-1 8.50E-1 1.09E+0 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Head SAR Generic Twin Phantom; Right Hand Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Brain: σ = 0.90 mho/m ε r = 41.5 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.25 mW/g, SAR (10g): 0.864 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0777 [848.31MHz] Conducted Power = 24.6dBm Test Date -- 04/09/2001 SAR Tot [mW/g] 1.14E-1 3.42E-1 5.71E-1 7.99E-1 1.03E+0 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- In; Crest Factor 1.0 SAR (1g): 1.00 mW/g, SAR (10g): 0.712 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.1013 [824.70MHz] Conducted Power = 24.6dBm; Spacing = 1.0cm from flat phantom, w/o beltclip or holster Test Date -- 04/10/2001 SAR Tot [mW/g] 1.00E-1 3.00E-1 5.01E-1 7.01E-1 9.01E-1 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.12 mW/g, SAR (10g): 0.797 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.1013 [824.70MHz] Conducted Power = 24.6dBm; Spacing = 1.0cm from flat phantom, w/o beltclip or holster Test Date -- 04/10/2001 SAR Tot [mW/g] 1.14E-1 3.43E-1 5.72E-1 8.00E-1 1.03E+0 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- In; Crest Factor 1.0 SAR (1g): 1.00 mW/g, SAR (10g): 0.705 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0383 [836.49MHz] Conducted Power = 24.6dBm; Spacing = 1.0cm from flat phantom, w/o beltclip or holster Test Date -- 04/10/2001 SAR Tot [mW/g] 8.42E-2 2.53E-1 4.21E-1 5.89E-1 7.58E-1 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- Out; Crest Factor 1.0 SAR (1g): 1.07 mW/g, SAR (10g): 0.758 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0383 [836.49MHz] Conducted Power = 24.6dBm; Spacing = 1.0cm from flat phantom, w/o beltclip or holster Test Date -- 04/10/2001 SAR Tot [mW/g] 1.06E-1 3.18E-1 5.30E-1 7.43E-1 9.55E-1 PCTEST Engineering Laboratory, Inc. SANYO FCC ID:AEZSCP-600 -- Cellular CDMA Body SAR Generic Twin Phantom; Flat Section; Probe: ET3DV6 - SN1560 -- Probe Cal Date 20/02/01 Med. Parameters 835 MHz Muscle: σ = 0.95 mho/m ε r = 56.2 ρ = 1.00 g/cm 3 ; Antenna Position -- In; Crest Factor 1.0 SAR (1g): 1.06 mW/g, SAR (10g): 0.751 mW/g SANYO Cellular CDMA Single-Mode Model:SCP-600 Cellular CDMA Mode, Ch.0777 [848.37MHz] Conducted Power = 24.6dBm; Spacing = 1.0cm from flat phantom, w/o beltclip or holster Test Date -- 04/10/2001 SAR…

Text truncated - open the document above for the full version.

© 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone © 2001 PCTEST Lab FCC ID: AEZSCP-600 (Tx 824-849 MHz) NVLAP Lab Code: 100431-0 SANYO Single-Mode Cellular CDMA Phone

© 2001 PCTEST Engineering Lab., Inc. PCTEST  Engineering Laboratory, Inc. 66606660--B Dobbin Road B Dobbin Road •• Columbia, MD 21045 Columbia, MD 21045 •• U.S.A. U.S.A. TEL (410) 290TEL (410) 290--6652 6652 •• FAX (410) 290 FAX (410) 290--66546654 http://www.pctestlab.comhttp://www.pctestlab.com CERTIFICATE OF COMPLIANCE (SAR EVALUATION) SANYO ELECTRIC CO., LTD. Date(s) of Tests: April 09-11, 2001 c/o Sanyo Sales & Supply (USA) Corp. Test Report S/N: SAR.210409202.AEZ 900 North Arlington Heights Road, Suite 300 Test Site: PCTEST Lab, Columbia, MD USA Itasca, IL 60143-2844 Attn: Mr. Koichi Takahashi, V.P. Marketing SANYO Fisher (USA) Corporation FCC ID AEZSCP-600 APPLICANT SANYO ELECTRIC CO., LTD. EUT Type: Single-Mode Cellular CDMA Phone Tx Frequency: 824.70 – 848.31 MHz Rx Frequency: 869.70 – 893.31 MHz Max. SAR Measurement(s): 1.340mW/g Cellular CDMA Head SAR; 1.120mW/g Cellular CDMA Body SAR Max. RF Output Power: 0.374 W ERP (25.727dBm) Trade Name/Model(s): SANYO SCP-600 FCC Classification: Non-Broadcast Transmitter Held to Ear (TNE) Application Type: Certification Serial Number: n/a (pre production) FCC Rule Part(s): 2.1093; ET Docket 96.326 This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in ANSI/IEEE Std. C95.3-1992. (See Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. NVLAP accreditation does not constitute any product endorsement by NVLAP or any agency of the United States Government. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. 210409202.AEZ SAR Measurement Report FCC Part 22 Certification © 2001 PCTEST Lab i Table of Contents 1.1 SCOPE 1 2.1 INTRODUCTION / SAR DEFINITION 2 3.1 SAR MEASUREMENT SET-UP 3 4.1 E-FIELD PROBE SYSTEM 4 5.1 E-FIELD PROBE CALIBRATION PROCESS 5-6 6.1 PHANTOM, HOLDER & EQUIVALENT TISSUES 7 7.1 SYSTEM SPECIFICATIONS 8 8.1 MEASUREMENT PROCESS 9 9.1 TEST POSITION OF THE PHONE 10 10.1 BODY-WORN TEST SETUP 11 11.1 ANSI/IEEE C95.1 RF EXPOSURE LIMITS 12 12.1 MEASUREMENT UNCERTAINTIES 13 13.1 TEST DATA SUMMARY 14-15 14.1 SAR TEST EQUIPMENT LIST 16 15.1 CONCLUSION 17 16.1 REFERENCES 18 Test Report S/N: SAR.210409202.AEZ SAR Measurement Report Test Date(s): April 09-11, 2001 FCC Part 22 Certification FCC ID: AEZSCP-600 (Tx 824-849 MHz) © 2001 PCTEST Lab SANYO Single-Mode Cellular CDMA Phone 1 SAR MEASUREMENT REPORT 1.1 Scope Environmental evaluation measurements of specific absorption rate 1 (SAR) distributions in simulated human tissues exposed to radiofrequency (RF) radiation from wireless portable devices for compliance with the rules and regulations of the U.S. Federal Communications Commission (FCC). 2 Company Name: SANYO ELECTRIC CO., LTD. c/o Sanyo Sales & Supply (USA) Corp. Address: 900 North Arlington Heights Road, Suite 300 Itasca, IL 60143-2844 Attention: Mr. Koichi Takahashi, V.P. Marketing SANYO Fisher (USA) Corporation • EUT Type: Single-Mode Cellular CDMA Phone • Trade Name: SANYO • Model(s): SCP-600 • FCC IDENTIFIER: AEZSCP-600 • S/N: Pre-production • Tx Frequency: 824.70 – 848.31 MHz • Rx Freq…

Text truncated - open the document above for the full version.