AFJ318200HF/50 MHz Tranceiver

INSTRUCTION MANUAL HF/50 MHz TRANSCEIVER i7410 This device complies with Part 15 of the FCC Rules. Op- eration is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. i FOREWORD Thank you for making the IC-7410 your radio of choice. We hope you agree with Icom’s philosophy of “technology first.” Many hours of research and devel- opment went into the design of your IC-7410. FEATURES M High receiver performance: third-order intercept (IP3) of +30 dBm (HF bands only) M Simple band scope function M ±0.5 ppm of high frequency stability M Large LCD with LED backlight M RS-BA1 compatible IMPORTANT READ THIS INSTRUCTION MANUAL CAREFULLY before attempting to operate the transceiver. SAVE THIS INSTRUCTION MANUAL. This manual contains important safety and operating instructions for the IC-7410. EXPLICIT DEFINITIONS WORDDEFINITION RDANGER! Personal death, serious injury or an explosion may occur. RWARNING! Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE If disregarded, inconvenience only. No risk of personal injury, fire or electric shock. Spurious signals may be received near some fre- quencies. These are made in the internal circuit and does not indicate a transceiver malfunction. SUPPLIED ACCESSORIES The transceiver comes with the following accessories. Qty. q Hand microphone ............................................ 1 w DC power cable ............................................... 1 e Spare fuse (ATC 5 A) ...................................... 1 r Spare fuse (ATC 30 A) .................................... 2 t ACC cable ......................................................... 1 y 6.3 (d) mm plug ................................................. 1 q e yt w r FCC INFORMATION s&/2#,!33"5.).4%.4)/.!,2!$)!4/23 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar- antee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer- ence by one or more of the following measures: s2EORIENTORRELOCATETHERECEIVINGANTENNA s)NCREASETHESEPARATIONBETWEENTHEEQUIPMENT and receiver. s#ONNECTTHEEQUIPMENTINTOANOUTLETONA circuit different from that to which the receiver is connected. s#ONSULTTHEDEALERORANEXPERIENCEDRADIO46 technician for help. #!54)/. Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regula- tions. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other coun- tries. All other products or brands are registered trademarks or trade- marks of their respective holders. PRECAUTIONS R WARNING HIGH RF VOLTAGE! NEVER attach an antenna or internal antenna connector during transmission. This may result in an electrical shock or burn. R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advise against continu- ous high volume operation. If you experience a ringing in your ears, reduce the volume or discontinue use. R WARNING! NEVER operate or touch the transceiver with wet hands. This may result in an electric shock or damage to the transceiver. R WARNING! NEVER apply AC power to the [DC13.8V] socket on the transceiver rear panel. This could cause a fire or damage the transceiver. R WARNING! NEVER apply more than 16 V DC to the [DC13.8V] socket on the transceiver rear panel, or use reverse polarity. This could cause a fire or damage the transceiver. R WARNING! NEVER let metal, wire or other objects protrude into the transceiver or into connectors on the rear panel. This may result in an electric shock. R WARNING! Immediately turn OFF the trans- ceiver power and remove the power cable if it emits an abnormal odor, sound or smoke. Contact your Icom dealer or distributor for advice. #!54)/..%6%2 put the transceiver in any unstable place (such as on a slanted surface or vibrated place). This may cause injury and/or damage to the transceiver. #!54)/. NEVER change the internal settings of the transceiver. This may reduce transceiver perfor- mance and/or damage to the transceiver. In particular, incorrect settings for transmitter circuits, such as output power, idling current, etc., might damage the expensive final devices. The transceiver warranty does not cover any prob- lems caused by unauthorized internal adjustment. #!54)/. NEVER block any cooling vents on the top, rear, sides or bottom of the transceiver. #!54)/. NEVER expose the transceiver to rain, snow or any liquids. #!54)/. NEVER install the transceiver in a place without adequate ventilation. Heat dissipation may be reduced, and the transceiver may be damaged. DO NOT use harsh solvents such as benzine or alcohol when cleaning, as they will damage the trans- ceiver surfaces. DO NOT push the PTT switch when you don’t actu- ally desire to transmit. DO NOT use or place the transceiver in areas with temperatures below ±0°C (+32°F) or above +50°C (+122°F). DO NOT place the transce…

Text truncated - open the document above for the full version.

UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] December 10, 2010 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Certification Testing in Accordance with FCC CFR 47, Part 15, Subpart B - Scanning Receivers Operating in the Frequency Band 0.03 MHz - 60 MHz. Applicant: ICOM Incorporated Product: HF/50 MHz Transceiver Model: IC-7410 FCC ID: AFJ318200 Dear Sir/Madam: As appointed agent for ICOM Incorporated, we would like to submit the application for certification of the above product. Please review all files uploaded to your electronic filing site. If you have any queries, please do not hesitate to contact us by our TOLL FREE number: OUR TELEPHONE NO.: 1-877-747-6381 Yours truly, Dan Huynh Dan Huynh Authorized Agent

HF/50 MHz Transceiver Model No.: IC-7410 FCC ID: AFJ318200 Applicant: ICOM Incorporated 1-1-32, Kamiminami, Hirano-ku Osaka, Japan, 547-0003 Tested in Accordance With Federal Communications Commission (FCC) 47 CFR, Part 15, Subpart B Scanning Receivers Operating in the Frequency Band 0.03 MHz - 60 MHz (excluding cellular bands) UltraTech's File No.: ICOM-263F15B121 This Test report is Issued under the Authority of Tri M. Luu, BASc Vice President of Engineering UltraTech Group of Labs Date: December 10, 2010 Report Prepared by: Dan Huynh Issued Date: December 10, 2010 Tested by: Wayne Wu, EMI/RFI Technician Test Dates: December 1, 2, 6 & 10, 2010  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] FCC Korea KCC-RRL 91038 1309 46390-2049 NvLap Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Parts 15 subpart B Section 15.121 contents i HF/50 MHz Transceiver, M/N: IC-7410 FCC ID: AFJ318200 ULTRATECH GROUP OF LABS File #: ICOM-263F15B121 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 December 10, 2010 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ............................................................................................................................................................1 1.1. SCOPE ............................................................................................................................................................................................1 1.2. RELATED SUBMITTAL(S)/GRANT(S) .......................................................................................................................................1 1.3. NORMATIVE REFERENCES .......................................................................................................................................................1 EXHIBIT 2. PERFORMANCE ASSESSMENT .................................................................................................................................2 2.1. CLIENT INFORMATION ..............................................................................................................................................................2 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION..................................................................................................................2 2.3. EUT’S TECHNICAL SPECIFICATIONS ......................................................................................................................................3 2.4. LIST OF EUT’S PORTS .................................................................................................................................................................3 2.5. ANCILLARY EQUIPMENT ..........................................................................................................................................................4 2.6. TEST SETUP BLOCK DIAGRAM.................................................................................................................................................5 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS...................................................6 3.1. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TEST SIGNALS...................................................................6 EXHIBIT 4. SUMMARY OF TEST RESULTS..................................................................................................................................7 4.1. LOCATION OF TESTS ..................................................................................................................................................................7 4.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS....................................................................................7 4.3. MODIFICATIONS REQUIRED FOR COMPLIANCE ..................................................................................................................7 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS ..................................................8 5.1. TEST PROCEDURES.....................................................................................................................................................................8 5.2. MEASUREMENT UNCERTAINTIES...........................................................................................................................................8 5.3. MEASUREMENT EQUIPMENT USED ........................................................................................................................................8 5.4. POWER LINE CONDUCTED EMISSIONS [§ 15.107(A)].............................................................................................................9 5.5. RECEIVER ANTENNA POWER SPURIOUS/HARMONIC CONDUCTED EMISSIONS [§15.111(A)]................................... 12 5.6. SPURIOUS/HARMONIC RADIATED EMISSIONS FROM RECEIVER AND CLASS B UNINTENTIONAL RADIATORS (DIGITAL DEVICES) [§ 15.109(A)] .................................................................................................................... 19 5.7. REQUIREMENTS FOR SCANNING RECEIVERS [§ 15.121]................................................................................................... 24 5.8. SCANNING RECEIVERS CELLULAR BAND REJECTION [§ 15.121(B)] ............................................................................... 27 EXH…

Text truncated - open the document above for the full version.

ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 1 Power Line Conducted Emission ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 2 Power Line Conducted Emission ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 3 Radiated Emission at 3m Distance (Rx Mode) ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 4 Radiated Emission at 3m Distance (Rx Mode) ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 5 Radiated Emission at 3m Distance (Rx Mode) ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 6 Radiated Emission at 3m Distance (Digital Device) ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 7 Radiated Emission at 3m Distance (Digital Device) ANNEX 1 – TEST SETUP PHOTOS Icom Incorporated HF/50 MHz Transceiver, Model IC-7410 FCC ID: AFJ318200 A1 - 8 Radiated Emission at 3m Distance (Digital Device)