AFJ453700Mobile Transceiver

Date: June 3, 2026 To Whom It May Concern Subject: Amateur Attestation Letter Applicant: Icom Incorporated Model: ID-5200A FCC ID: AFJ453700 Dear Sir/Madam, The unit is transceiver that transmits in Amateur frequency band as follows for US/Canada. 144.000 - 148.000 MHz 430.000 - 450.000 MHz Also the frequency range is documented in the user manual. Sincerely, Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 3, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: AFJ453700 Statement for 47 CFR section 2.911(d)(5)(i) Icom Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) Icom Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Icom Inc. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Sincerely, Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/ Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 3, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: AFJ453700 Icom Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/

Date: June 3, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statements Part 2.911(d)(7) Filing Applicant: Icom Inc. FCC ID: AFJ453700 Dear Sir/Madam: Icom Inc., FRN: 0005855366 (“the applicant”) certifies that, as of the date of the filing of the application, Icom America Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Icom Inc accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Icom America Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: • FRN 0001585587 • Name: Icom America Inc. • Address: 12421 Willows Road NE Kirkland, WA 98034 • Contact Person: Jim Backeland • Tel.: 425-454-8155 • Email: [email protected] Sincerely, US Agent: Applicant: Jim Backeland Tatsuo Yano Icom America Inc. Icom Inc. President General Manager of Quality Assurance Department ______________________ ______________________ 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/

Date: June 3, 2026 To Whom It May Concern Subject: Authority to Act as an Agent Applicant: Icom Inc. Product: Scanning receiver Model: ID-5200A FCC ID: AFJ453700 Dear Sir/Madam, We hereby appoint Celltech Labs Inc and any individual person working within Celltech Labs Inc to act as our agent in preparation of this application for authorization of above equipment under F.C.C. Rules. We hereby certify that neither the application nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CRF 1.2002(b) for the definition of a “party” for these purposes. We also certify that the information provided, properly, describes the device or system for which authorization is required. Best regards Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/

© Celltech Labs Inc – 2021 ____________________________________________________________________________________________________ Celltech Labs Inc., 21-364 Lougheed Road, Kelowna, British Columbia, Canada V1X 7R8 Tel: 1-250-765-7650 FCC Test Lab: CA3874 Date: 1 July 2026 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA RE: Icom Inc. FCC ID: AFJ453700 This is an application for a new certification the Icom Inc. ID-5200A, FCC ID: AFJ453700, Model 453700-01. The ID-5200A is a 50W, VHF, UHF Amateur Radio Service device transmitting on the 144-148MHz and 430- 450MHz bands. It contains a pre-certified WiFi module, FCC ID: Z64-CC33DBMOD, and a BlueTooth transceiver which is not certified. All three transmitters can simultaneously transmit. The scope of this investigation was to evaluate the BlueTooth transceiver and the scanning receiver of the Amateur Radio Service device. RF exposure was also evaluated for all simultaneous conditions. The ID-5200A was found to be compliant with the requirements of FCC §15.247 and §15.121. Should there be any questions or concerns with this filing, please feel free to contact me. Sincerely, Art Voss, P.Eng. Ret., BS EE Technical Manager 21-364 Lougheed Rd Kelowna, BC, V1X 7R8, Canada 250-765-7650 Ext 202 [email protected] www.celltechlabs.com

Date: June 3, 2026 To Whom It May Concern Subject: Confidentiality and Short-Term Confidentiality Letter Applicant: Icom Inc. FCC ID: AFJ453700 Dear Sir/Madam: The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. Confidential 1. Operational Description 2. Block Diagram 3. Schematics 4. Parts List 5. Tuning Info Short-Term Confidential for 120 days 6. Internal Photos and Test Setup Photo 7. Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation shall not be made. Regards Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-5305 e-mail: [email protected] URL : https://www.icomjapan.com/

Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 8 of 27 EXHIBIT 16 – PHOTOS – DUT EXTERNAL Figure E16.1 – External, Front Figure E16.2 – External, Back Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 9 of 27 Figure E16.3 – External, Right Side Figure E16.4 – External, Left Side Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 10 of 27 Figure E16.5 – External, Top Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 11 of 27 Figure E16.6 – External, Bottom Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 12 of 27 Figure E16.7 – External, Controller

Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 5 of 27 EXHIBIT 8 – LABEL SAMPLE Figure E8.1 – Label Sample

Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 6 of 27 EXHIBIT 9 – LABEL LOCATION Figure E9.1 – Label Location

Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 4 of 29 EXHIBIT 7 – FCC SAR REPORT OR FCC RF EXPOSURE (MPE) REPORT MPE of WiFi Transmitter, Standalone 1 S 20 = S L = S C = R 20 = R c = P T = P A = G N = f = (%) (dB) R C = S C = S 20 at 20cm = 0.088 Power Input to Antenna Numeric Gain of the Antenna (MHz) Antenna Gain:2.30 (numeric) 260.00(mW) Cable or Other Loss:0.00 Numeric Antenna Gain (G N ): 1.70 Adjust Power 100% Power Density Limit Minimum Distance to the Radiating Element to Meet Compliance Power Density of the Device at the Compliance Distance R C 20cm 5.9 (cm) (mW/cm 2 ) 1.00 (mW/cm 2 ) S L = Duty Cycle/Loss Adjusted Power (P A ): Transmit Frequency Transmit Duty Cycle = (dBi) Tx Frequency (f): RF Power at Antenna Input Port (P T ): Transmit Duty Cycle: Use Group = General Popuation 260.00 100.00 2412.000 1.000 (mW/cm 2 ) (mW) (mW/cm 2 ) Power Density of the Device at 20cm Prediction of MPE Limit 47 CFR § 2.1091 S 20 = P A G N R C = √ P A G N S C = P A G N 4 πR C 2 4 π S L 4 πR 20 2 S L = PASSRESULT Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 5 of 29 MPE of Bluetooth Transmitter, Standalone 1 S 20 = S L = S C = R 20 = R c = P T = P A = G N = f = (%) (dB) R C = S C = S 20 at 20cm = 0.002 Power Input to Antenna Numeric Gain of the Antenna (MHz) Antenna Gain:2.00 (numeric) 7.00(mW) Cable or Other Loss:0.00 Numeric Antenna Gain (G N ): 1.58 Adjust Power 100% Power Density Limit Minimum Distance to the Radiating Element to Meet Compliance Power Density of the Device at the Compliance Distance R C 20cm 0.9 (cm) (mW/cm 2 ) 1.00 (mW/cm 2 ) S L = Duty Cycle/Loss Adjusted Power (P A ): Transmit Frequency Transmit Duty Cycle = (dBi) Tx Frequency (f): RF Power at Antenna Input Port (P T ): Transmit Duty Cycle: Use Group = General Popuation 7.00 100.00 2402.000 1.000 (mW/cm 2 ) (mW) (mW/cm 2 ) Power Density of the Device at 20cm Prediction of MPE Limit 47 CFR § 2.1091 S 20 = P A G N R C = √ P A G N S C = P A G N 4 πR C 2 4 π S L 4 πR 20 2 S L = PASSRESULT For mobile applications, R = 20cm. The combined power density of the WiFi and Bluetooth transmitters is given by: S Wifi + S BT = 0.088 + 0.002 = 0.09mW/cm 2 which is less than the limit of 1.0mW/cm 2 Applicant: Icom Inc. Project: 1696 FCC ID: AFJ453700 Test Report S/N: 45462039 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 6 of 29 MPE of Amateur Radio, Standalone 0.02 S 20 = S L = S C = R 20 = R c = P T = P A = G N = f = (%) (dB) R C = S C = S 20 at 20cm = 9.947 Power Input to Antenna Numeric Gain of the Antenna (MHz) Antenna Gain:0.00 (numeric) 50000.00(mW) Cable or Other Loss:0.00 Numeric Antenna Gain (G N ): 1.00 Adjust Power 100% Power Density Limit Minimum Distance to the Radiating Element to Meet Compliance Power Density of the Device at the Compliance Distance R C 20cm 141.0 (cm) (mW/cm 2 ) 0.20 (mW/cm 2 ) S L = Duty Cycle/Loss Adjusted Power (P A ): Transmit Frequency Transmit Duty Cycle = (dBi) Tx Frequency (f): RF Power at Antenna Input Port (P T ): Transmit Duty Cycle: Use Group = General Popuation 50000.00 100.00 144.000 0.200 (mW/cm 2 ) (mW) (mW/cm 2 ) Power Density of the Device at 20cm Prediction of MPE Limit 47 CFR § 2.1091 S 20 = P A G N R C = √ P A G N S C = P A G N 4 πR C 2 4 π S L 4 πR 20 2 S L = 142cmUser's Manual must indicate a minimum separation distance of: At a distance of 142cm, S WiFi = 0.0017mW/cm 2 , S BT = 0.0004mW/cm 2 Combined Power Density is given by S A + S WiFi + S BT = 0.2 + 0.0017 + 0.00004 = 0.20174mW/cm 2

ID-5200A Bluetooth Block︓Antenna description specification Manufacturer name : TAIYO YUDEN CO., LTD. Manufacturer's address : Kyobashi East Bldg., 2-7-19, Kyobashi, Chuo-ku, Tokyo 104-0031, Japan Type : Multilayer Monopole Antenna Model : TSA5N18D2G45NV001T Peak gain : 2.0dBi Frequency band : 2400 to 2500MHz Radiation pattern : Fig.1: Radiation pattern XY-plane Fig.2: Radiation pattern YZ-plane Fig.3: Radiation pattern ZX-plane *Important Notice This product has RF connector on its PWB, but it is only used by manufacture for inspection test. Consumers cannot use this connector.

Japan © 2026 Celltech Labs Inc, This report shall not be reproduced in any form without the expressed written consent of Celltech Labs Inc. CFR Title 47, Part 15 Subpart C (§15.247), Part 15 Subpart B Digital Transmission System (DTS) FCC Registration: 608310 Ben Hewson, President Celltech Labs Inc. IC Registration 3874A 21-364 Lougheed Rd. Kelowna, BC, V1X 7R8 Canada MRA Designation: CA3874ISED CAB ID: CA3874 Test Report Serial Number: Test Report Date: EMC Test Report - New Certification 45462039 r3.0 Project Number: 20 July 2026 1696 Applicant: 1-1-32, Kamiminami Product Model Number / HVINProduct Marketing Name / PMN FCC ID: AFJ453700 ICOM Incorporated 453700-01ID-5200A Hirano-Ku, Osaka, 547-0003 Test Lab Certificate: 2470.01 In Accordance With: Approved By: Test Report S/N: 45462039 r3.0 Test Report Issue Date: 20 July 2026 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 2 of 127 Table of Contents 1.0 REVISION HISTORY ........................................................................................................................................................ 5 2.0 CLIENT AND DUT INFORMATION .................................................................................................................................. 6 3.0 SCOPE .............................................................................................................................................................................. 7 4.0 TEST SUMMARY .............................................................................................................................................................. 8 5.0 NORMATIVE REFERENCES ......................................................................................................................................... 10 6.0 FACILITIES AND ACCREDITATIONS ........................................................................................................................... 11 7.0 OCCUPIED BANDWIDTH .............................................................................................................................................. 12 8.0 DTS BANDWIDTH .......................................................................................................................................................... 19 9.0 ANTENNA PORT CONDUCTED POWER, (DSS) ......................................................................................................... 26 10.0 POWER SPECTRAL DENSITY .................................................................................................................................... 43 11.0 FHSS NUMBER OF HOPPING CHANNELS ................................................................................................................ 50 12.0 FHSS CHANNEL SEPARATION .................................................................................................................................. 58 13.0 FHSS TIME OF OCCUPANCY ..................................................................................................................................... 66 14.0 CONDUCTED SPURIOUS EMISSIONS -BAND EDGE ............................................................................................... 74 15.0 CONDUCTED SPURIOUS EMISSIONS ...................................................................................................................... 86 16.0 RADIATED TX SPURIOUS EMISSIONS, RESTRICTED BAND ............................................................................... 100 17.0 RADIATED RX (SCANNING RECEIVER) SPURIOUS EMISSIONS ......................................................................... 106 18.0 SIMULTANEOUS TRANSMISSION ........................................................................................................................... 112 APPENDIX A – TEST SETUP DRAWINGS ....................................................................................................................... 122 APPENDIX B – EQUIPMENT LIST AND CALIBRATION ................................................................................................... 126 APPENDIX C – MEASUREMENT INSTRUMENT UNCERTAINTY ................................................................................... 127 END OF REPORT ............................................................................................................................................................... 127 Table of Figures Figure A.1 – Test Setup – Conducted Measurements ........................................................................................................ 122 Figure A.2 – Test Setup Radiated Measurements 9kHzMHz – 30MHz.............................................................................. 123 Figure A.3 – Test Setup Radiated Measurements 30MHz – 1GHz .................................................................................... 124 Figure A.4 – Test Setup Radiated Measurements 30MHz – 1GHz, Signal Substitution .................................................... 124 Figure A.5 – Test Setup Radiated Measurements 1 – 18GHz, .......................................................................................... 125 Figure A.6 – Test Setup Radiated Measurements 18 – 26.5GHz, ..................................................................................... 125 Test Report S/N: 45462039 r3.0 Test Report Issue Date: 20 July 2026 ©2026 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the expressed written permission of Celltech Labs Inc. Page 3 of 127 Table of Plots Plot 7.1 – Occupied Bandwidth, BT 1EDR ............................................................................................................................ 13 Plot 7.2 – Occupied Bandwidth, BT 2EDR ..........................................................................................................…

Text truncated - open the document above for the full version.