AFJ444500Scanning Receiver

Date: August 6, 2024 To Whom It May Concern Subject: Scanning Receiver Statement Applicant: Icom Inc Product: Scanning Receiver Model: IC-7760 FCC ID: AFJ444500 The equipment under application herein incorporates a scanning receiver. Accordingly, § 15.121 of the Commission’s rules applies. The equipment under application herein is incapable of operating (tuning), or being readily altered by the user to operate within the frequency bands allocated to the Domestic Public cellular Radio Telecommunications Service (“Cellular Radio Service”). The equipment is also incapable of converting digital cellular transmissions to analog voice audio. The receiver portion of the equipment under application herein scans 0.030-60.000MHz, the receiver does not scan the bands used by the Cellular Radio Service, 824-849 and 869-894MHz. The receiver portion of the equipment under application cannot be altered to enable it to scan the Cellular Radio Service bands by means of clipping the leads of or installing a diode, resistor and/or jumper wire, or other such simple component. Nor can the receiver be made to scan the Cellular Radio Service bans by replacing a plug-in semiconductor chip, since no such plug-in chips are utilized. The semiconductor chips that are utilized in the equipment cannot be erased and reprogrammed. The radio design of the tuning, control and filtering circuitry on the receiver is controlled by the serial data from the firmware code in the microprocessor, which is built-in by the microprocessor manufacture as a part of the internal design of the processor. Since the processor information is inaccessible to the user (Even Icom peoples), if someone attempt modifying circuitry without the knowledge of the firmware code, the radio simply will fail to operate. In view of the above, the equipment complies with § 15.121 of the Commission rules. Sincerely Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/

Date: August 6, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statements Part 2.911(d)(7) Filing Applicant: Icom Inc FCC ID: AFJ444500, FRN: 0005855366 Dear Sir/Madam: Icom Inc, (“the applicant”) certifies that, as of the date of the filing of the application, Icom America Inc is our designated U.S. agent for service of process for the above referenced FCC ID. Icom Inc accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. Icom America Inc accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: FRN 0001585587 Name: Icom America Inc Address: 12421 Willows Road NE Kirkland, WA 98034 Contact Person: Jim Backeland Tel.: 425-454-8155 Email: [email protected] Sincerely, US Agent: Applicant: Jim Backeland Tatsuo Yano Icom America Inc. Icom Inc President General Manager of Quality Assurance Department ______________________ ______________________ 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-5305 e-mail: [email protected] URL : https://www.icomjapan.com/

Date: August 6, 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Attestation Statements Parts 2.911(d)(5)(i) and 2.911(d)(5)(ii) Filing Applicant: Icom Inc Product: Scanning receiver Model: IC-7760 FCC ID: AFJ444500 Attestation for 47 CFR section 2.911(d)(5)(i) Icom Inc, (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Attestation for 47 CFR section 2.911(d)(5)(ii) Icom Inc, (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Cover List Link: (https://www.fcc.gov/supplychain/coveredlist) Sincerely, Icom Inc Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-0013 e-mail: [email protected] URL : https://www.icomjapan.com/

Date: August 6, 2024 To Whom It May Concern Subject: Confidentiality and Short-Term Confidentiality Letter Applicant: Icom Inc FCC ID: AFJ444500 Dear Sir/Madam: The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. Confidential 1.Operational Descriptio n 2.Block Diagram 3.Schematics, Parts List 4. Tuning Info 5. Internal Photos Short-Term Confidential for 120 days 6.Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation shall not be made. Regards Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-5305 e-mail: [email protected] URL : https://www.icomjapan.com/

Date: August 6, 2024 To Whom It May Concern Subject: Authority to Act as an Agent Applicant: Icom Inc Product: Scanning receiver Model: IC-7760 FCC ID: AFJ444500 Dear Sir/Madam, We hereby appoint Sharon Hoffman of Timco Engineering, Inc. to act as our agent in preparation of this application for authorization of above equipment under F.C.C. Rules. We hereby certify that neither the application nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CRF 1.2002(b) for the definition of a “party” for these purposes. We also certify that the information provided, property describe the device or system for which authorization is required. Best regards Icom Incorporated Tatsuo Yano General Manager of Quality Assurance Department 1-1-32 kamiminami Hirano-ku Osaka Japan. Phone : +81 66793-5301 Fax : +81 66793-5305 e-mail: [email protected] URL : https://www.icomjapan.com/

1. RF deck exterior FRONT (RF deck) REAR (RF deck) LEFT (RF deck) RIGHT (RF deck) TOP (RF deck) BOTTOM (RF deck) 2. Controller exterior FRONT (Controller) REAR (Controller) LEFT (Controller) RIGHT (Controller) TOP (Controller) BOTTOM (Controller)

1. RF deck Label RF Serial number seal RF Serial number seal location Serial number seal, applied here. 2. Controller Label Controller Serial number seal Controller Serial number seal location

Test Report# TR_15483-24_Sub_FCC 15B_Scanning Receiver_ Revision: 2 Te s t Report – FCC Par t 15B Unintentional Radiator Applicant: Icom Incorporated Signature: Name & Title: Tim Royer, EMC Engineer Date of Signature 9/4/2024 Signature: Name & Title: Kristoffer Costa, EMC Technician Date of Signature 9/4/2024 This test report relates only to the items tested as identified and is not valid for any subsequent changes or modifications made to the equipment under test. 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 2 of 56 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc., a subsidiary of Industrial Inspection & Analysis, Inc. (IIA). Table of Contents 1. APPLICANT INFORMATION ........................................................................................................................................................................... 4 1.1 TEST RESULT SUMMARY ............................................................................................................................................................................................4 2. LOCATION OF TESTING ................................................................................................................................................................................. 5 2.1 TEST LABORATORY .................................................................................................................................................................................................... 5 3. TEST SAMPLE(S) (EUT/DUT) ........................................................................................................................................................................... 5 3.1 DESCRIPTION OF THE EUT ........................................................................................................................................................................................ 6 3.2 CONFIGURATION OF EUT ......................................................................................................................................................................................... 7 3.3 TEST SETUP OF EUT .................................................................................................................................................................................................. 7 4. TEST METHODS & APPLICABLE REGULATORY LIMITS ............................................................................................................................ 8 4.1 TEST METHODS/STANDARDS/GUIDANCE ................................................................................................................................................................ 8 5. MEASUREMENT UNCERTAINTY .................................................................................................................................................................... 8 6. ENVIRONMENTAL CONDITIONS ................................................................................................................................................................. 8 7. LIST OF TEST EQUIPMENT AND TEST FACILITY ........................................................................................................................................ 9 8. TEST RESULTS ................................................................................................................................................................................................. 10 8.1 38 DB REJECTION ..................................................................................................................................................................................................... 11 8.2 RADIATED EMISSIONS.............................................................................................................................................................................................. 12 8.2.1 Scanning Receiver Function, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Plot ........................................................ 13 8.2.2 Scanning Receiver Function, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Table ..................................................... 14 8.2.3 Scanning Receiver Function, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Plot .................................................... 15 8.2.4 Scanning Receiver Function, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Table ................................................. 16 8.2.5 Scanning Receiver Function, above 1000 MHz, Horizontal/ Vertical Polarity Plot............................................................... 17 8.2.6 Scanning Receiver Function, above 1000 MHz, Horizontal/ Vertical Polarity Table ........................................................... 18 8.2.7 30 MHz, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Plot ............................................................................................. 19 8.2.8 30 MHz, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Table......................................................................................... 20 8.2.9 30 MHz, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Plot ........................................................................................ 21 8.2.10 30 MHz, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Table ..................................................................................... 22 8.2.11 30 MHz, above 1000 MHz, Horizontal/ Vertical Polarity Plot .................................................................................................. 23 8.2.12 30 MHz, above 1000 MHz, Horizontal/ Vertical Polarity Table ............................................................................................... 24 8.2.13 45 MHz, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Plot ..…

Text truncated - open the document above for the full version.

Test Report# TR_15483-24_Main_FCC 15B_Scanning Receiver_ Revision: 2 Te s t Report – FCC Par t 15B Unintentional Radiator Applicant: Icom Incorporated Signature: Name & Title: Tim Royer, EMC Engineer Date of Signature 9/4/2024 Signature: Name & Title: Kristoffer Costa, EMC Technician Date of Signature 9/4/2024 This test report relates only to the items tested as identified and is not valid for any subsequent changes or modifications made to the equipment under test. 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 2 of 56 This test report shall not be reproduced except in full without the written and signed permission of Timco Engineering Inc., a subsidiary of Industrial Inspection & Analysis, Inc. (IIA). Table of Contents 1. APPLICANT INFORMATION ........................................................................................................................................................................... 4 1.1 TEST RESULT SUMMARY ............................................................................................................................................................................................4 2. LOCATION OF TESTING ................................................................................................................................................................................. 5 2.1 TEST LABORATORY .................................................................................................................................................................................................... 5 3. TEST SAMPLE(S) (EUT/DUT) ........................................................................................................................................................................... 5 3.1 DESCRIPTION OF THE EUT ........................................................................................................................................................................................ 6 3.2 CONFIGURATION OF EUT ......................................................................................................................................................................................... 7 3.3 TEST SETUP OF EUT .................................................................................................................................................................................................. 7 4. TEST METHODS & APPLICABLE REGULATORY LIMITS ............................................................................................................................ 8 4.1 TEST METHODS/STANDARDS/GUIDANCE ................................................................................................................................................................ 8 5. MEASUREMENT UNCERTAINTY .................................................................................................................................................................... 8 6. ENVIRONMENTAL CONDITIONS ................................................................................................................................................................. 8 7. LIST OF TEST EQUIPMENT AND TEST FACILITY ........................................................................................................................................ 9 8. TEST RESULTS ................................................................................................................................................................................................. 10 8.1 38 DB REJECTION ..................................................................................................................................................................................................... 11 8.2 RADIATED EMISSIONS.............................................................................................................................................................................................. 12 8.2.1 Scanning Receiver Function, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Plot ........................................................ 13 8.2.2 Scanning Receiver Function, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Table ..................................................... 14 8.2.3 Scanning Receiver Function, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Plot .................................................... 15 8.2.4 Scanning Receiver Function, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Table ................................................. 16 8.2.5 Scanning Receiver Function, above 1000 MHz, Horizontal/ Vertical Polarity Plot............................................................... 17 8.2.6 Scanning Receiver Function, above 1000 MHz, Horizontal/ Vertical Polarity Table ........................................................... 18 8.2.7 30 MHz, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Plot ............................................................................................. 19 8.2.8 30 MHz, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Table......................................................................................... 20 8.2.9 30 MHz, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Plot ........................................................................................ 21 8.2.10 30 MHz, 200 MHz to 1000 MHz, Horizontal/ Vertical Polarity Table ..................................................................................... 22 8.2.11 30 MHz, above 1000 MHz, Horizontal/ Vertical Polarity Plot .................................................................................................. 23 8.2.12 30 MHz, above 1000 MHz, Horizontal/ Vertical Polarity Table ............................................................................................... 24 8.2.13 45 MHz, 30 MHz to 200 MHz, Horizontal/ Vertical Polarity Plot .…

Text truncated - open the document above for the full version.

ANNEX B – Test Setup Photograph Exhibit Icom Incorporated FCC ID: AFJ444500 Radiated Testing, Table Setup #1 Radiated Testing, Below 1 GHz #1 Radiated Testing, Below 1 GHz #2 Radiated Testing, Above 1 GHz #1 AC Powerline Conducted Testing