AFJ329600HF TRANSCEIVER

2001 NEW HF TRANSCEIVER iF8100 INSTRUCTION MANUAL This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. i 2001 NEW2001 NEW FOREWORD Thank you for purchasing this Icom product. The IC- F8100 h f t r a n s c e i v e r is designed and built with Icom’s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We appreciate you making the IC-F8100 your radio of choice, and hope you agree with Icom’s philosophy of “technology first.” Many hours of research and develop- ment went into the design of your IC-F8100. D FEATURES ❍ ALE (Automatic Link Establishment)/Sel- call capability ❍ Digital Signal Processor (DSP) allows flex- ible filter selection ❍ Full-dot matrix LCD for a variety of infor- mation IMPORTANT READ THIS INSTRUCTION MANUAL CAREFULLY before attempting to operate the transceiver. SAVE THIS INSTRUCTION MANUAL. This manual contains important safety and operating in- structions for the IC-F8100. EXPLICIT DEFINITIONS WORDDEFINITION R DANGER! Personal death, serious injury or an explosion may occur. R WARNING! Personal injury, fire hazard or electric shock may occur. CAUTION Equipment damage may occur. NOTE Recommended for optimum use. No risk of personal injury, fire or electric shock. Versions of the IC-F8100 which display the “N33” symbol on the serial number seal, comply with Standard Australia Specification No. AS/NZS 4770: 2000. FOREWORD .............................................................. i IMPORTANT ............................................................... i EXPLICIT DEFINITIONS ............................................ i TABLE OF CONTENTS ............................................. i PRECAUTIONS ......................................................... ii FCC INFORMATION ................................................ iii SAFETY TRAINING INFORMATION ....................... iii INFORMATION EN MATIÈRE DE SÉCURITÉ ........ iv 1 PANEL DESCRIPTION ..................................... 1–7 ■ Controller (Front panel or HM-192) .................... 1 ■ Rear panel ......................................................... 4 ■ LCD screen ........................................................ 5 ■ AD-119 Optional Junction Box ........................... 7 2 BASIC OPERATION ....................................... 8–11 ■ Power ON .......................................................... 8 ■ Selecting display mode ...................................... 8 ■ Selecting a channel ........................................... 8 ■ Setting audio volume ......................................... 9 ■ Squelch function ................................................ 9 ■ Scan function ..................................................... 9 ■ Mode selection................................................. 10 ■ Key Lock function ............................................. 10 ■ VFO operation .................................................. 11 3 RECEIVE AND TRANSMIT ........................... 12–18 ■ Basic voice transmit/receive ............................ 12 ■ Functions for transmit ...................................... 13 ■ Functions for receive........................................ 15 4 SELCALL/ALE OPERATION ........................ 19–33 ■ Selcall/ALE ...................................................... 19 5 MENU SCREEN ............................................ 34–46 ■ Edit Menu ......................................................... 34 ■ User Menu ....................................................... 35 ■ Admin Menu ..................................................... 38 ■ CPU Reset ....................................................... 46 6 CONNECTION AND INSTALLATION ........... 47–60 ■ Supplied accessories ....................................... 47 ■ Connections ..................................................... 49 ■ Ground connection .......................................... 51 ■ Power source ................................................... 51 ■ Antenna ........................................................... 52 ■ CFU-F8100 (Optional Cooling Fan) ................. 52 ■ RMK-6 (Optional Separation kit) ...................... 53 ■ HM-192 (Optional Remote control microphone) ......................................................................... 55 ■ Mounting .......................................................... 56 ■ Fuse replacement ............................................ 58 ■ Connector information for AD-119 ................... 59 7 SPECIFICATIONS ............................................... 61 8 OPTIONS ............................................................ 62 TABLE OF CONTENTS Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. All other products or brands are registered trademarks or trademarks of their respective holders. 2001 NEW ii PRECAUTIONS R DANGER HIGH RF VOLTAGE! NEVER attach an antenna or internal antenna connector during trans- mission. This may result in an electrical shock or burn. R WARNING! NEVER operate the transceiver with a headset or other audio accessories at high volume levels. Hearing experts advise against continuous high volume operation. If you experience a ringing in your ears, reduce the volume or discontinue use. R WARNING! NEVER operate or touch the trans- ceiver with wet hands. This may result in an electric shock or damage to the transceiver. R WARNING! NEVER apply AC power to the [DC13.8V] socket on the transceiver rear panel. This could cause a fire or damage the transceiver. R WARNING! NEVER apply more than 16 V DC to the [DC13.8V] socket on the transceiver rear panel, or use reverse polarity. This could cause a fire or damage the transceiver. R WARNING! NEVER let metal, wire or other objec…

Text truncated - open the document above for the full version.

UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NVLAP Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] June 15, 2012 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Equipment Certification under FCC 47 CFR, Parts 2 and 90 - Non- Broadcast Radio Transceivers Operating in the Frequency Band 1.6 - 30 MHz. Applicant: ICOM Incorporated Product: HF Transceiver Model: IC-F8100 FCC ID: AFJ329600 Dear Sir/Madam: As appointed agent for ICOM Incorporated, we would like to submit the application for certification of the above product. Please review all files uploaded to your electronic filing site. If you have any queries, please do not hesitate to contact us. Yours truly, DanHuynh Dan Huynh Authorized Agent UltraTech Group of Labs FCC TCB & IC CB Ultratech’s Accreditations: 0685 FCC 91038 1309 46390-2049 NVLAP Lab Code 200093-0 SL2-IN-E-1119R Korea KCC-RRL CA2049 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected] June 15, 2012 Icom America, Inc. 2380 116 th Ave. N.E. Bellevue, Washington USA, 98004 Attn.: Mr. Masaaki Takahashi Subject: Certification Testing in accordance with FCC 47 CFR, Parts 2 and 90 - Non-Broadcast Radio Transceivers Operating in the Frequency Band 1.6 - 30 MHz. Product: HF Transceiver Model: IC-F8100 FCC ID: AFJ329600 Dear Mr. Takahashi: The product sample has been tested in accordance with FCC 47 CFR, Parts 2 and 90 - Non-Broadcast Radio Transceivers Operating in the Frequency Band 1.6 - 30 MHz, and the results and observation were recorded in the engineering report, Our File No.: ICOM-296F90. Enclosed you will find copy of the engineering report. If you have any queries, please do not hesitate to contact us. Yours truly, Tri Minh Luu, P.Eng Vice President - Engineering Encl.

Ｓｅｒｉａｌ Ｓｅａｌ Ｍａｎｕｓｃｒｉｐｔ Ｐｏｓｉｔｉｏｎ Ｒｉｇｈｔ－ｓｉｄｅ Ｖｉｅｗ

HF Transceiver Model No.: IC-F8100 FCC ID: AFJ329600 Applicant: ICOM Incorporated 1-1-32, Kamiminami, Hirano-ku Osaka Japan, 547-0003 Tested in Accordance With Federal Communications Commission (FCC) 47 CFR, Parts 2 and 90 UltraTech's File No.: ICOM-296F90 This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: June 15, 2012 Report Prepared by: Dan Huynh Issued Date: June 15, 2012 Tested by: Wei Wu Test Dates: June 01-13, 2012  The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected.  This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech Group of Labs 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected] , Email: [email protected] FCC Korea KCC-RRL 91038 1309 46390-2049 NVLAP Lab Code 200093-0 SL2-IN-E-1119R CA2049 FCC Parts 2 and 90, Non-Broadcast Radio Transceivers Contents i HF Transceiver, Model IC-F8100 FCC ID: AFJ329600 ULTRATECH GROUP OF LABS File #: ICOM-296F90 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 June 15, 2012 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. INTRODUCTION ............................................................................................................................................ 1 1.1. SCOPE ............................................................................................................................................................................ 1 1.2. RELATED SUBMITTAL(S)/GRANT(S) ...................................................................................................................... 1 1.3. NORMATIVE REFERENCES ....................................................................................................................................... 1 EXHIBIT 2. PERFORMANCE ASSESSMENT .................................................................................................................. 2 2.1. CLIENT INFORMATION ............................................................................................................................................. 2 2.2. EQUIPMENT UNDER TEST (EUT) INFORMATION ................................................................................................. 2 2.3. EUT’S TECHNICAL SPECIFICATIONS ..................................................................................................................... 3 2.4. LIST OF EUT’S PORTS ................................................................................................................................................. 3 2.5. ANCILLARY EQUIPMENT ......................................................................................................................................... 4 2.6. GENERAL TEST SETUP .............................................................................................................................................. 5 EXHIBIT 3. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS ................................... 6 3.1. CLIMATE TEST CONDITIONS ................................................................................................................................... 6 3.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TEST SIGNALS .................................................. 6 EXHIBIT 4. SUMMARY OF TEST RESULTS .................................................................................................................. 7 4.1. LOCATION OF TESTS ................................................................................................................................................. 7 4.2. APPLICABILITY & SUMMARY OF EMISSION TEST RESULTS ............................................................................ 7 4.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES ............................................ 7 EXHIBIT 5. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS .................................. 8 5.1. RF POWER OUTPUT [§ 2.1046, 90.205] ...................................................................................................................... 8 5.2. AUDIO FREQUENCY RESPONSE [§ 2.1047(A) & 90.242(B)(8)] ............................................................................. 12 5.3. MODULATION LIMITING [§ 2.1047 (B) & 90.210] .................................................................................................. 15 5.4. OCCUPIED BANDWIDTH & EMISSION MASK [§ 2.1049, 90.209 & 90.210] ........................................................ 20 5.5. TRANSMITTER ANTENNA POWER SPURIOUS/HARMONIC CONDUCTED EMISSIONS [§ 2.1051, 2.1057, 90.210] ..................................................................................................................................................................................... 74 5.6. TRANSMITTER SPURIOUS/HARMONIC RADIATED EMISSIONS [§ 2.1053, 2.1057, 90.210] .......................... 87 5.7. FREQUENCY STABILITY [§ 2.1055, 90.213] ........................................................................................................... 90 5.8. RF EXPOSURE REQUIRMENTS [§§ 1.1310 & 2.1091] ............................................................................................ 92 5.9. TEST EQUIPMENT LIST ............................................................................................................................................ 94 EXHIBIT 6. MEASUREMENT UNCERTAINTY ............................................................................................................ 95 6.1. …

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOGRAPHS Photo # 1 ICOM Incorporated HF Transceiver, M/N: IC-F8100 FCC ID: AFJ329600 DC Powerline Conducted Emissions ANNEX 1 - TEST SETUP PHOTOGRAPHS Photo # 2 ICOM Incorporated HF Transceiver, M/N: IC-F8100 FCC ID: AFJ329600 DC Powerline Conducted Emissions ANNEX 1 - TEST SETUP PHOTOGRAPHS Photo # 3 ICOM Incorporated HF Transceiver, M/N: IC-F8100 FCC ID: AFJ329600 Radiated Transmitter Emission Test at 3m ANNEX 1 - TEST SETUP PHOTOGRAPHS Photo # 4 ICOM Incorporated HF Transceiver, M/N: IC-F8100 FCC ID: AFJ329600 Radiated Transmitter Emission Test at 3m ANNEX 1 - TEST SETUP PHOTOGRAPHS Photo # 5 ICOM Incorporated HF Transceiver, M/N: IC-F8100 FCC ID: AFJ329600 Radiated Transmitter Emission Test at 3m