AFJ407500HF/VHF/UHF All Mode Transceiver

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. BASIC MANUAL 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan HF/VHF/UHF ALL MODE TRANSCEIVER |705 Thank you for choosing this Icom product. This product is designed and built with Icom’ s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. EXPLICIT DEFINITIONS WORDDEFINITION RDANGER! Personal death, serious injury or an explosion may occur. RWARNING! Personal injury, fire hazard or electric shock may occur. CAUTIONEquipment damage may occur. NOTE Recommended for optimum use. No risk of personal injury, fire or electric shock. i BASIC MANUAL SUPPLIED ACCESSORIES LSome accessories are not supplied, or the shape is different, depending on the transceiver version. This product combines traditional analog technologies with the Digital Smart Technologies for Amateur Radio (D-STAR), for a balanced package. IMPORTANT READ ALL INSTRUCTIONS carefully completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL— This instruction manual contains basic operating instructions for the IC-705 . For advanced operating instructions, see the Advanced Manual for details. The Advanced Manual is available at the following internet address: https://www.icomjapan.com/support/ FEATURES •RF Direct Sampling System The IC-705 employs an RF direct sampling system under 25 MHz. RF signals are directly converted to digital data in the ADC, and then processed in the FPGA. This system is a leading technology, marking an epoch in amateur radio. •Real-Time Spectrum Scope The spectrum scope is class-leading in resolution, sweep speed, and dynamic range. When you touch the scope screen on the intended signal, the touched area is magnified. The large 4.3 inch color TFT touch LCD offers intuitive operation. •D-STAR operation The IC-705 has the D-STAR Repeater (DR) function. •A 4.3 inch touch panel color display •Multi-function control for easy settings Speaker microphone (0.8 m: 2.6 ft) DC power cable (1.5 m: 4.9 ft) Cushion Sheet CW key plug ( 3.5 mm: 1/8 inch stereo) Spare fuse (FGB 4 A) Microphone plate Battery pack This product includes RTOS “RTX” software, and is licensed according to the software license. This product includes “zlib” open source software, and is licensed according to the open source software license. This product includes “libpng” open source software, and is licensed according to the open source software license. Refer to the “About the Licenses” page at the end of the manual in English for information on the open source software being used in this product. This software is based in part on the work of the Independent JPEG Group, and is licensed according to the open source software license. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW. CAUTION: Changes or modifications to this device, not expressly approved by Icom Inc., could void your authority to operate this device under FCC regulations. Icom is not responsible for the destruction, damage to, or performance of any Icom or non- Icom equipment, if the malfunction is because of: • Force majeure, including, but not limited to, fires, earthquakes, storms, floods, lightning, or other natural disasters, disturbances, riots, war, or radioactive contamination. • The use of Icom transceivers with any equipment that is not manufactured or approved by Icom. DISPOSAL The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area. ABOUT CE AND DOC Hereby, Icom Inc. declares that the versions of IC-705 which have the “CE” symbol on the product, comply with the essential requirements of the Radio Equipment Directive, 2014/53/EU, and the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.icomjapan.com/support/ ii BASIC MANUAL ABOUT SPURIOUS SIGNALS Spurious signals may be received near the following frequencies. These are made in the internal circuit and does not indicate a transceiver malfunction: • 28.378 MHz • 28.524 MHz • 29.621 MHz • 50.467 MHz • 51.343 MHz • 51.509 MHz • 51.564 MHz • 51.674 MHz • 52.222 MHz • 52.661 MHz • 438.602 MHz VOICE CORDING TECHNOLOGY The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual property rig…

Text truncated - open the document above for the full version.

1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: [email protected] URL : http://www.icom.co.jp/world Date: July 27, 2020 To Whom It May Concern Subject: Scanning Receiver Statement Applicant: Icom Incorporated Product: Scanning Receiver Model: IC-705 FCC ID: AFJ407500 The equipment under application herein incorporates a scanning receiver. Accordingly, § 15.121 of the Commission’s rules applies. The equipment under application herein is incapable of operating (tuning), or being readily altered by the user to operate within the frequency bands allocated to the Domestic Public cellular Radio Telecommunications Service (“Cellular Radio Service”). The equipment is also incapable of converting digital cellular transmissions to analog voice audio. The receiver portion of the equipment under application herein scans 0.03-199.999999, 400-470MHz, the receiver does not scan the bands used by the Cellular Radio Service, 824-849 and 869-894MHz. The receiver portion of the equipment under application cannot be altered to enable it to scan the Cellular Radio Service bands by means of clipping the leads of or installing a diode, resistor and/or jumper wire, or other such simple component. Nor can the receiver be made to scan the Cellular Radio Service bans by replacing a plug-in semiconductor chip, since no such plug-in chips are utilized. The semiconductor chips that are utilized in the equipment cannot be erased and reprogrammed. The radio design of the tuning, control and filtering circuitry on the receiver is controlled by the serial data from the firmware code in the microprocessor, which is built-in by the microprocessor manufacture as a part of the internal design of the processor. Since the processor information is inaccessible to the user (Even Icom peoples), if someone attempt modifying circuitry without the knowledge of the firmware code, the radio simply will fail to operate. In view of the above, the equipment complies with § 15.121 of the Commission rules. Sincerely Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: [email protected] URL : http://www.icom.co.jp/world Date: June 30, 2020 To Whom It May Concern Subject: Confidentiality Letter Applicant: Icom Incorporated FCC ID: AFJ407500 Dear Sir/Madam: The applicant would like to request the following documents submitted with this application for certification be withheld from public disclosure as per Section 0.457 & 0.459 of FCC Rules. 1. Block Diagram 2. Schematics 3. Parts List 4. Internal Photographs 5. Operational Description 6. Tuning Info The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation shall not be made. Regards Atsushi Tomiyama General Manager of Quality Assurance Department

1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: [email protected] URL : http://www.icom.co.jp/world Date: June 30, 2020 To Whom It May Concern Subject: Authority to Act as an Agent Applicant: Icom Incorporated Product: Scanning Receiver Model: IC-705 FCC ID: AFJ407500 Dear Sir/Madam, We hereby appoint Compliance Testing, LLC to act as our agent in preparation of this application for authorization of above equipment under F.C.C. Rules. We hereby certify that neither the application nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CRF 1.2002(b) for the definition of a “party” for these purposes. We also certify that the information provided, property describe the device or system for which authorization is required. Best regards Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

1-6-19,Kamikuratsukuri,Hirano-ku,Osaka Japan. Phone : +81 6 6793 8424 Fax : +81 6 6793 3336 e-mail: [email protected] URL : http://www.icom.co.jp/world Date: June 30, 2020 To Whom It May Concern Subject: Manufacture’s Letter Applicant: Icom Incorporated Product: Scanning Receiver Model: IC-705 FCC ID: AFJ407500 Dear Sir/Madam, Please be advised that the manufacture will ensure that the above-referenced model will be manufactured in accordance with the FCC Rules and Regulations. These scanning receivers are manufactured exclusively for, and marked exclusively to, entities described in 18 U.S.C. 2512(2), or are marketed exclusively as test equipment pursuant to Sec.15.3(dd). They are also labeled for exclusive use by Government users. Thank you for your attention to this matter. Icom Incorporated Atsushi Tomiyama General Manager of Quality Assurance Department

Radiated Emissions Test Setup Photos A/C Conducted Emissions Test Setup Photos