ALH37683110VHF FM Handheld Transceiver

KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 INSTRUCTION MANUAL TK-2212-1/TK-3212-1/TK-3212-2 THANK YOU! We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. NOTICES TO THE USER WARNING: • GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE TERRITORIES UNDER GOVERNMENT CONTROL. •I LLEGAL OPERATION IS PUNISHABLE BY FINE OR IMPRISONMENT OR BOTH. •R EFER SERVICE TO QUALIFIED TECHNICIANS ONLY. •D O NOT OPERATE YOUR TRANSCEIVER IN EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, ETC.). •TURN OFF YOUR TRANSCEIVER WHILE TAKING ON FUEL, OR WHILE PARKED IN GASOLINE SERVICE STATIONS. SAFETY: It is important that the operator is aware of and understands hazards common to the operation of any transceiver. WARNING: EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • I ncrease the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 ATTENTION (U.S.A. Only): The RBRC Recycle seal found on KENWOOD nickel-metal hydride (Ni-MH) battery packs indicates KENWOOD’s voluntary participation in an industry program to collect and recycle Ni-MH batteries after their operating life has expired. The RBRC program is an alternative to disposing Ni-MH batteries with your regular refuse or in municipal waste streams, which is illegal in some areas. For information on Ni-MH battery recycling in your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). KENWOOD’s involvement in this program is part of our commitment to preserve our environment and conserve our natural resources. UNPACKING AND CHECKING EQUIPMENT Note: The following unpacking instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. • Accessories Quantity Item Part Number TK-2212-1 TK-3212-1 TK-3212-2 Instruction Manual B62 –1817 - *0 1 1 1 Instruction Manual B62 –1846 - *0 1 1 1 Belt Hook J29 –0712 - *5 1 1 1 Screw Set N99-2043 - *5 1 1 1 Cap B09 – 0680 - *3 1 1 1 Holder J19 – 5472 - *3 1 1 1 Helical Antenna T90 –1036 - *5 1 Whip Antenna T90 –1039 - *5 1 Whip Antenna T90 –1040 - *5 1 Battery Assy. W09 –1000 - *5 1 1 1 Charger W08 –0969 - *5 1 1 1 AC Adapter W08 –0970 - *5 1 1 1 Pamphlet B59 –2391 - *0 1 1 1 KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing/ Removing the Optional Battery Pack PREPARATION The battery pack is not charged at the factory; charge it before use. CAUTION: • DO NOT RECHARGE THE BATTERY PACK IF IT IS ALREADY FULLY CHARGED. DOING SO MAY CAUSE THE LIFE OF THE BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY BE DAMAGED. • AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT FROM THE CHARGER. IF THE CHARGER POWER IS RESET (TURNED ON AFTER BEING TURNED OFF), RECHARGING WILL START AGAIN AND THE BATTERY PACK WILL BECOME OVERCHARGED. • DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE OF THE BATTERY BY FIRE. • NEVER ATTEMPT TO REMOVE THE CASING FROM THE BATTERY PACK. 1 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery pack t 2 To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing the Antenna Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Installing the Belt Clip Using the 2 screws, affix the belt clip in place. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37…

Text truncated - open the document above for the full version.

KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 INSTRUCTION MANUAL TK-2212-1/TK-3212-1/TK-3212-2 THANK YOU! We are grateful you chose KENWOOD for your land mobile radio applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. NOTICES TO THE USER WARNING: • GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED RADIO TRANSMITTERS WITHIN THE TERRITORIES UNDER GOVERNMENT CONTROL. •I LLEGAL OPERATION IS PUNISHABLE BY FINE OR IMPRISONMENT OR BOTH. •R EFER SERVICE TO QUALIFIED TECHNICIANS ONLY. •D O NOT OPERATE YOUR TRANSCEIVER IN EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, ETC.). •TURN OFF YOUR TRANSCEIVER WHILE TAKING ON FUEL, OR WHILE PARKED IN GASOLINE SERVICE STATIONS. SAFETY: It is important that the operator is aware of and understands hazards common to the operation of any transceiver. WARNING: EXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn off your transceiver while taking on fuel, or while parked in gasoline service stations. One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • I ncrease the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 ATTENTION (U.S.A. Only): The RBRC Recycle seal found on KENWOOD nickel-metal hydride (Ni-MH) battery packs indicates KENWOOD’s voluntary participation in an industry program to collect and recycle Ni-MH batteries after their operating life has expired. The RBRC program is an alternative to disposing Ni-MH batteries with your regular refuse or in municipal waste streams, which is illegal in some areas. For information on Ni-MH battery recycling in your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). KENWOOD’s involvement in this program is part of our commitment to preserve our environment and conserve our natural resources. UNPACKING AND CHECKING EQUIPMENT Note: The following unpacking instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. • Accessories Quantity Item Part Number TK-2212-1 TK-3212-1 TK-3212-2 Instruction Manual B62 –1817 - *0 1 1 1 Instruction Manual B62 –1846 - *0 1 1 1 Belt Hook J29 –0712 - *5 1 1 1 Screw Set N99-2043 - *5 1 1 1 Cap B09 – 0680 - *3 1 1 1 Holder J19 – 5472 - *3 1 1 1 Helical Antenna T90 –1036 - *5 1 Whip Antenna T90 –1039 - *5 1 Whip Antenna T90 –1040 - *5 1 Battery Assy. W09 –1000 - *5 1 1 1 Charger W08 –0969 - *5 1 1 1 AC Adapter W08 –0970 - *5 1 1 1 Pamphlet B59 –2391 - *0 1 1 1 KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing/ Removing the Optional Battery Pack PREPARATION The battery pack is not charged at the factory; charge it before use. CAUTION: • DO NOT RECHARGE THE BATTERY PACK IF IT IS ALREADY FULLY CHARGED. DOING SO MAY CAUSE THE LIFE OF THE BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY BE DAMAGED. • AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT FROM THE CHARGER. IF THE CHARGER POWER IS RESET (TURNED ON AFTER BEING TURNED OFF), RECHARGING WILL START AGAIN AND THE BATTERY PACK WILL BECOME OVERCHARGED. • DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE OF THE BATTERY BY FIRE. • NEVER ATTEMPT TO REMOVE THE CASING FROM THE BATTERY PACK. 1 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery pack t 2 To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 TK-3212-1 FCC ID: ALH37693110 / IC: 282D-37693110 TK-3212-2 FCCID: ALH37693120 Installing the Antenna Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Installing the Belt Clip Using the 2 screws, affix the belt clip in place. KENWOOD CORPORATION TK-2212-1 FCC ID: ALH37…

Text truncated - open the document above for the full version.

December 20, 2004 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL: TK-2212-1, FCC ID: ALH37683110. Dear Sir: Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission's Rules, the Applicant hereby requests permanent confidential treatment of some of the information accompanying this Application, as listed below: Block Diagram Schematic Diagrams Circuit Description Parts List Active Devices Tuning Procedure These materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457 (d)(1)(ii), disclosure of the Application and all accompanying documentation will not be made before the date of Grant for the Application.

TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 Front View Rear View TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 Top View Bottom View TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 Left View Right View

TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110

TK-2212-1 FCC ID: ALH37683110 / IC: 282D-37683110 Component Side View Foil Side View

Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. 21 of 21 Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation APPENDIX F - SAR TEST SETUP & DUT PHOTOGRAPHS Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom with Long Whip Antenna (P/N: KRA-25) 2.5 cm 3.5 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom with Whip Antenna (P/N: KRA-26M/M2/M3) 2.5 cm 3.8 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom with Stubby Antenna (P/N: KRA-22M/M2/M3) 2.5 cm 3.5 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom with Stubby Antenna (P/N: KRA-16M) 2.5 cm 3.5 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom with Stubby Antenna (P/N: KRA-16M3) 2.5 cm 3.5 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation FACE-HELD SAR TEST SETUP PHOTOGRAPHS 2.5 cm Separation Distance from Front of Radio to Planar Phantom with Stubby Antenna (P/N: KRA-16M2) 2.5 cm 3.5 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Belt-Clip Separation Distance from Battery to Planar Phantom with Long Whip Antenna (P/N: KRA-25) & Speaker-Microphone Accessory (P/N: KMC-17) 3.2 cm 1.1 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Belt-Clip Separation Distance from Battery to Planar Phantom with Long Whip Antenna (P/N: KRA-25) & Boom-Mic Headset Accessory (P/N: KHS-21) 3.2 cm 1.1 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Belt-Clip Separation Distance from Battery to Planar Phantom with Whip Antenna (P/N: KRA-26M/M2/M3) & Speaker-Microphone Accessory (P/N: KMC-17) 1.1 cm 3.0 cm Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation BODY-WORN SAR TEST SETUP PHOTOGRAPHS 1.1 cm Belt-Clip Separation Distance from Battery to Planar Ph…

Text truncated - open the document above for the full version.

Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. 16 of 21 Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation APPENDIX A - SAR MEASUREMENT DATA Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation Date Tested: 11/06/04 Face-Held SAR - Long Whip Antenna (P/N: KRA-25) DUT: Kenwood Model: TK-2212-1; Type: Portable FM VHF PTT Radio Transceiver; Serial: 00000002 Ambient Temp: 22.7 qC; Fluid Temp: 21.7 ºC; Barometric Pressure: 102.2 kPa; Humidity: 33% Communication System: FM VHF Frequency: 155.1 MHz; Duty Cycle: 1:1 RF Output Power: 37.19 dBm (Conducted) 7.5V 1500mAh NiMH Battery Pack (P/N: KNB-29N) Medium: M150 (ı = 0.73 mho/m; İ r = 53.1; ȡ = 1000 kg/m 3 ) - Probe: ET3DV6 - SN1387; ConvF(9.1, 9.1, 9.1); Calibrated: 18/03/2004 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn370; Calibrated: 14/05/2004 - Phantom: Planar; Type: Plexiglas; Serial: 161 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Face-Held - 2.5 cm Separation Distance - Mid Channel/Area Scan (8x27x1): Measurement grid: dx=15mm, dy=15mm Face-Held - 2.5 cm Separation Distance - Mid Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 56.9 V/m; Power Drift = -0.766 dB Peak SAR (extrapolated) = 3.94 W/kg SAR(1 g) = 2.52 mW/g; SAR(10 g) = 1.89 mW/g Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation Z-Axis Scan Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation Date Tested: 11/23/04 Face-Held SAR - Whip Antenna (P/N: KRA-26M3) DUT: Kenwood Model: TK-2212-1; Type: Portable FM VHF PTT Radio Transceiver; Serial: 00000002 Ambient Temp: 23.5 qC; Fluid Temp: 21.3 ºC; Barometric Pressure: 102.2 kPa; Humidity: 33% Communication System: FM VHF Frequency: 136.1 MHz; Duty Cycle: 1:1 RF Output Power: 37.22 dBm (Conducted) 7.5V 1500mAh NiMH Battery Pack (P/N: KNB-29N) Medium: M150 (ı = 0.75 mho/m; İ r = 53.7; ȡ = 1000 kg/m 3 ) - Probe: ET3DV6 - SN1387; ConvF(9.1, 9.1, 9.1); Calibrated: 18/03/2004 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn370; Calibrated: 14/05/2004 - Phantom: Planar; Type: Plexiglas; Serial: 161 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Face-Held - 2.5 cm Separation Distance - Low Channel/Area Scan (8x22x1): Measurement grid: dx=15mm, dy=15mm Face-Held - 2.5 cm Separation Distance - Low Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 19.4 V/m; Power Drift = -0.200 dB Peak SAR (extrapolated) = 0.485 W/kg SAR(1 g) = 0.312 mW/g; SAR(10 g) = 0.233 mW/g Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation Z-Axis Scan Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the written permission of Celltech Labs Inc. Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation Date Tested: 11/06/04 Face-Held SAR - Whip Antenna (P/N: KRA-26M) DUT: Kenwood Model: TK-2212-1; Type: Portable FM VHF PTT Radio Transceiver; Serial: 00000002 Ambient Temp: 22.7 qC; Fluid Temp: 21.7 ºC; Barometric Pressure: 102.2 kPa; Humidity: 33% Communication System: FM VHF Frequency: 155.1 MHz; Duty Cycle: 1:1 RF Output Power: 37.14 dBm (Conducted) 7.5V 1500mAh NiMH Battery Pack (P/N: KNB-29N) Medium: M150 (ı = 0.73 mho/m; İ r = 53.1; ȡ = 1000 kg/m 3 ) - Probe: ET3DV6 - SN1387; ConvF(9.1, 9.1, 9.1); Calibrated: 18/03/2004 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn370; Calibrated: 14/05/2004 - Phantom: Planar; Type: Plexiglas; Serial: 161 - Measurement SW: DASY4, V4.3 Build 22; Postprocessing SW: SEMCAD, V1.8 Build 127 Face-Held - 2.5 cm Separation Distance - Mid Channel/Area Scan (8x22x1): Measurement grid: dx=15mm, dy=15mm Face-Held - 2.5 cm Separation Distance - Mid Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 55.3 V/m; Power Drift = -0.595 dB Peak SAR (extrapolated) = 3.74 W/kg SAR(1 g) = 2.42 mW/g; SAR(10 g) = 1.8 mW/g Applicant: Kenwood USA Corporation FCC ID: ALH37683110 IC ID: 282D-37683110 Model:TK-2212-1Portable FM VHF PTT Radio Transceiver 136 - 174 MHz 2004 Celltech Labs Inc. This document …

Text truncated - open the document above for the full version.

© 2004 Celltech Labs Inc. 1 of 21 Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation Performed By: Spencer Watson Compliance Technologist Celltech Labs Inc . Reviewed By: Russell W. Pipe Senior Compliance Technologist Celltech Labs Inc. Celltech Labs Inc. declares under its sole responsibility that this wireless portable device has demonstrated compliance with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 and Health Canada’s Safety Code 6. The device was tested in accordance with the measurement standards and procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01) and Industry Canada RSS-102 Issue 1 (Provisional) for the Occupational / Controlled Exposure environment. All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. DECLARATION OF COMPLIANCE SAR RF EXPOSURE EVALUATION Test Lab CELLTECH LABS INC. Testing and Engineering Services 1955 Moss Court Kelowna, B.C. Canada V1Y 9L3 Phone: 250-448-7047 Fax: 250-448-7046 e-mail: [email protected] web site: www.celltechlabs.com Applicant Information KENWOOD USA CORPORATION 3975 John Creek Court, Suite 300 Suwanee, GA 30024 United States IDENTIFIER(s): FCC ID: ALH37683110 IC: 282D-37683110 Model(s): TK-2212-1 Rule Part(s): FCC 47 CFR §2.1093; IC RSS-102 Issue 1 (Provisional) Test Procedure(s): FCC OET Bulletin 65, Supplement C (Edition 01-01) Device Classification: Licensed Non-Broadcast Transmitter Held to Face (TNF) Device Description: Portable FM VHF PTT Radio Transceiver Modulation Type: FM (VHF) Tx Frequency Range: 136 - 174 MHz Max. RF Output Power Measured: 37.27 dBm Conducted (136.1 MHz) 37.19 dBm Conducted (155.1 MHz) 36.99 dBm Conducted (173.9 MHz) Antenna Type(s) Tested: Long Whip 148 - 162 MHz (P/N: KRA-25) Whip 146 - 162 MHz (P/N: KRA-26M) Whip 162 - 174 MHz (P/N: KRA-26M2) Whip 136 - 150 MHz (P/N: KRA-26M3) Stubby 146 - 162 MHz (P/N: KRA-22M) Stubby 162 - 174 MHz (P/N: KRA-22M2) Stubby 136 - 150 MHz (P/N: KRA-22M3) Stubby 148 - 162 MHz (P/N: KRA-16M) Stubby 162 - 174 MHz (P/N: KRA-16M2) Stubby 130 - 150 MHz (P/N: KRA-16M3) Battery Type(s) Tested: NiMH 7.5 V, 1500 mAh (P/N: KNB-29N) Body-Worn Accessories Tested: Plastic Belt-Clip with Metal Spring (P/N: KBH-10) Speaker-Microphone (P/N: KMC-17) Boom-Mic Headset (P/N: KHS-21) Max. SAR Levels Evaluated: Face-held: 1.50 W/kg (50% Duty Cycle) Body-worn: 3.34 W/kg (50% Duty Cycle) © 2004 Celltech Labs Inc. 2 of 21 Test Report S/N: 102004ALH-F572-S90V Test Date(s): November 6, 23, 25, & 27, 2004 Test Type: FCC/IC SAR Evaluation TABLE OF CONTENTS 1.0INTRODUCTION......................................................................3 2.0DESCRIPTION OF DUT............................................................. 3 3.0SAR MEASUREMENT SYSTEM................................................. 4 4.0MEASUREMENT SUMMARY...................................................... 5-6 5.0DETAILS OF SAR EVALUATION................................................ 7 6.0EVALUATION PROCEDURES.................................................... 7 7.0SYSTEM PERFORMANCE CHECK............................................. 8 8.0SIMULATED EQUIVALENT TISSUES.......................................... 9 9.0SAR SAFETY LIMITS............................................................... 9 10.0ROBOT SYSTEM SPECIFICATIONS............................................ 10 11.0PROBE SPECIFICATION.......................................................... 11 12.0PLANAR PHANTOM................................................................. 11 13.0VALIDATION PHANTOM........................................................... 11 14.0DEVICE HOLDER.................................................................... 11 15.0TEST EQUIPMENT LIST........................................................... 12 16.0MEASUREMENT UNCERTAINTIES............................................. 13-14 17.0REFERENCES........................................................................15 APPENDIX A - SAR MEASUREMENT DATA............................................... 16 APPENDIX B - SYSTEM PERFORMANCE CHECK DATA...................…

Text truncated - open the document above for the full version.