ALH413800UHF FM Transceiver

© B62-2238-00 (K,M,P) 09 08 07 06 05 04 03 02 01 00 VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER INSTRUCTION MANUAL ÉMETTEUR-RÉCEPTEUR FM VHF/ ÉMETTEUR-RÉCEPTEUR FM UHF MODE D’EMPLOI TRANSCEPTOR FM VHF/ TRANSCEPTOR FM UHF MANUAL DE INSTRUCCIONES TK-2312/ TK-3312 VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER TK-2312/ TK-3312 INSTRUCTION MANUAL ENGLISH  ATTENTION: The RBRC Recycle seal found on Kenwood l th um-on (L -on) battery packs nd cates Kenwood ’s voluntary partcpaton n an ndustry program to collect and recycle L-on batteres after ther operatng lfe has expred. The RBRC program s an alternatve to dsposng L-on batteres wth your regular refuse or n muncpal waste streams, whch s llegal n some areas. For nformaton on L-on battery recyclng n your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). Kenwood ’s nvolvement n ths program s part of our commtment to preserve our envronment and conserve our natural resources. ATTENTION: The RBRC Recycle seal found on Kenwood n ckel metal hydrde (N-MH) battery packs nd cates Kenwood ’s voluntary partcpaton n an ndustry program to collect and recycle N-MH batteres after ther operatng lfe has expred. The RBRC program s an alternatve to dsposng N-MH batteres wth your regular refuse or n muncpal waste streams, whch s llegal n some areas. For nformaton on N-MH battery recyclng n your area, call (toll free) 1-800-8-BATTERY (1-800-822-8837). Kenwood ’s nvolvement n ths program s part of our commtment to preserve our envronment and conserve our natural resources. Thank You We are grateful you have chosen Kenwood for your land moble rado applcatons. noTices To The user ◆ Government law prohbts the operaton of unlcensed rado transmtters wthn the terrtores under government control. ◆ Illegal operaton s punshable by fne and/or mprsonment. ◆ Refer servce to qualfed techncans only. Safety: It s mportant that the operator s aware of, and understands, hazards common to the operaton of any transcever.  One or more of the following statements may be applicable: FCC WARNING Ths equpment generates or uses rado frequency energy. Changes or modfcatons to ths equpment may cause harmful nterference unless the modfcatons are expressly approved n the nstructon manual. The user could lose the authorty to operate ths equpment f an unauthorzed change or modfcaton s made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths equpment generates, uses and can generate rado frequency energy and, f not nstalled and used n accordance wth the nstructons, may cause harmful nterference to rado communcatons. However, there s no guarantee that the nterference wll not occur n a partcular nstallaton. If ths equpment does cause harmful nterference to rado or televson recepton, whch can be determned by turnng the equpment off and on, the user s encouraged to try to correct the nterference by one or more of the followng measures: • Reorent or relocate the recevng antenna. • Increase the separaton between the equpment and recever. • Connect the equpment to an outlet on a crcut dfferent from that to whch the recever s connected. • Consult the dealer for techncal assstance.  Terminal DescripTions Speaker/ Microphone Jacks You can use a resn-based cover for the Speaker/ Mcrophone jacks. No.NameDescriptionImpedanceI/O 1PTT / RXD External PTT Input / Seral Data Input CMOSI 2MICExternal MIC Input1.8 kΩI 3MICINInternal MIC Output1.8 kΩO 4OPTDETExternal Opton DetectHgh ImpedanceI 55M5V Output100 ΩO 6AEGNDGND − 7TXDSeral Data OutputCMOSO 8NCNo Connecton −− 9SPOAudo Input8 ΩI 10SPIReceved Audo Output8 ΩO Antenna Terminal 50 Ω impedance Battery Terminal The battery termnal uses a sprng plate. The negatve termnal connects to the chasss ground. The battery s mounted on the rear sde of the transcever usng a latch mountng method. Firmware Copyrights The ttle to and ownershp of copyrghts for frmware embedded n Kenwood product memores are reserved for Kenwood Corporaton. v precauTions • Do not charge the transcever and battery pack when they are wet. • Ensure that there are no metallc tems located between the transcever and the battery pack. • Do not use optons not specfed by Kenwood. • If the de-cast chasss or other transcever part s damaged, do not touch the damaged parts. • If a headset or headphone s connected to the transcever, reduce the transcever volume. Pay attenton to the volume level when turnng the squelch off. • Do not place the mcrophone cable around your neck whle near machnery that may catch the cable. • Do not place the transcever on unstable surfaces. • Ensure that the end of the antenna does not touch your eyes. • When the transcever s used for transmsson for many hours, the radator and chasss wll become hot. Do not touch these locatons when replacng the battery pack. • Do not mmerse the transcever n water. • Always swtch the transcever power off before nstallng optonal accessores. • For safety reasons, we recommend that the AC adapter (for the battery charger) should be connected to an easly accessble AC socket. v Turn the transcever power off n the followng locatons: • In explosve atmospheres (nflammable gas, dust partcles, metallc powders, gran powders, etc.). • Whle takng on fuel or whle parked at gasolne servce statons. • Near explosves or blastng stes. • In arcrafts. (Any use of the transcever must follow the nstructons and regulatons provded by the arl ne crew.) • Where restrct ons or warnngs are posted regardng the use of rado devces, nclud…

Text truncated - open the document above for the full version.

October 8, 2010 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 To Whom It May Concern: This letter will authorize Compliance Testing LLC to act as our Agent in all FCC matters. This appointment is effective until otherwise notified by us. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The Applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 USC 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely,

October 28, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: CONFIDENTIALITY REQUEST FOR MODEL: TK-3312-1, TK-3317-1, FCC ID: ALH413800. To Whom It May Concern: This letter serves as an official request for permanent confidentiality pursuant to 47 CFR Section 0.459 of the Commission Rules. We have requested that the Block Diagram, Schematic Diagrams, Circuit Description, Parts List, Active Devices and Tuning Procedure required to be submitted with this application be withheld from public review. The documents are company proprietary information that should never get into the possession of our competition. Please contact me if you require any additional information. Sincerely,

October 28, 2010 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer Subject: Justify Extended Frequency Range for MODEL: TK-3312-1, TK-3317-1, FCC ID: ALH413800. To Whom It May Concern: This letter serves justification for extended frequencies This device has design capability to operate in the frequency band 406.1 to 470 MHz and complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Please note that Licensed End Users do not have access to any external controls that will allow them to program the equipment. Equipment programming is the responsibility of Kenwood approved Service Agents. In addition to Parts 22/74/90 usage, this device is utilized in systems such as Federal and Public Safety agencies, e.g. police, fire, and emergency medical, etc. as indicated in the following table: Table 1 – Frequency Range and Rule Parts - (47 CFR Part 2.106) It is understood that a grant note code may be added to the grant which indicates this required operation. Please contact me if you require any additional information. Sincerely, Freq. Range (MHz) Part 90 Part 22 Part 74 Federal Customers 450.0000-454.0000 x x 454.0000-455.0000 x 455.0000-456.0000 x 456.0000-460.0000 x x 460.0000-462.5375 x 462.5375-462.7375 x 462.7375-467.5375 x 467.5375-467.7375 x 467.7375-470.0000 x 470.0000-512.0000 x x x 512.0000-520.0000 x

TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800 Front View Rear View TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800 Left View Right View TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800 Top View bottom View

TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800 TK-3312-1 TK-3317-1

TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800 Component Side View Foil Side View TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800 TK-3312-1 FCC ID: ALH413800 TK-3317-1 FCC ID: ALH413800

Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 1 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 DECLARATION OF COMPLIANCE - SAR RF EXPOSURE EVALUATION (FCC) Test Lab Information CELLTECH LABS INC. 21-364 Lougheed Road, Kelowna, B.C. V1X 7R8 Canada Test Lab Accreditation(s) ISO 17025 (A2LA Test Lab Certificate No. 2470.01) Applicant Information KENWOOD USA CORPORATION 3970 Johns Creek Court, Suite 100, Suwanee, GA 30024 USA Application Type(s) FCC TCB Certification Standard(s) Applied FCC 47 CFR §2.1093 FCC OET Bulletin 65, Supplement C KDB 447498 D01v04 KDB Inquiry Track No. 218833 FCC Occupational PTT Test Reduction Draft Considerations (v 07 15 10 Jul 29 2010) Procedure(s) Applied IEEE1528-2003 IEC62209-1:2005 Device Classification(s) FCC Licensed Non-Broadcast Transmitter Held to Face (TNF) - FCC Part 90 Device Identifier(s) FCC ID: ALH413801 Device Model(s) TK-3312-1 (tested) TK-3317-1 Note: Models are electrically and mechanically identical Test Sample Serial No. 1SU12 (Identical Prototype) Hardware Rev. No. 0Firmware Rev. No. 0 Date of Sample Receipt August 03, 2010 Date(s) of Evaluations Aug. 05-06, 09-13, 16-17, 31, Sept. 01-03, 07, 2010 Device Description Portable FM UHF Push-To-Talk (PTT) Radio Transceiver Device Frequency Range(s) 450.0 - 512.0 MHz Manufacturer’s Rated Output Power 5 W atts (Conducted) Manuf. Tolerance Spec. +/- 0 dB 36.90 dBm 4.90 W atts 450.0 MHz Average Conducted 36.90 dBm 4.90 W atts 463.3 MHz Average Conducted 36.90 dBm 4.90 W atts 470.0 MHz Average Conducted 36.99 dBm 5.00 W atts 476.7 MHz Average Conducted 36.99 dBm 5.00 W atts 484.0 MHz Average Conducted 37.08 dBm 5.10 W atts 490.0 MHz Average Conducted 37.08 dBm 5.10 W atts 498.0 MHz Average Conducted RF Output Power Level(s) Tested 37.16 dBm 5.20 W atts 512.0 MHz Average Conducted Detachable Stub P/N: KRA-17M Antenna A 450-490 MHz Nc = 4 Length: 79 mm Detachable Stub P/N: KRA-17M2 Antenna B 470-512 MHz Nc = 4 Length: 74 mm Detachable Stub P/N: KRA-23M Antenna C 450-490 MHz Nc = 4 Length: 80 mm Detachable Stub P/N: KRA-23M2 Antenna D 470-512 MHz Nc = 4 Length: 80 mm Detachable W hip P/N: KRA-27M Antenna E 450-490 MHz Nc = 4 Length: 149 mm Antenna Type(s) Tested Detachable W hip P/N: KRA-27M2 Antenna F 470-512 MHz Nc = 4 Length: 140 mm Ni-MH 7.2 V 1500 mAh P/N: KNB-29N Battery a Battery Type(s) Tested Li-ion 7.4 V 2000 mAh P/N: KNB-45L Battery b Body-worn Accessories Tested Metal Belt-Clip P/N: KBH-10 Category 1: Headset Category 2: Earpiece Category 3: Wire Kit Category 4: Speaker-Mic PN: KHS-10-OH (Default) PN: KHS-23 (Default) PN: KHS-8BL (Default) PN: KMC-48GPS (Default) PN: KHS-10-BH PN: KHS-25 PN: KHS-9BL PN: KMC-45 PN: KHS-21 PN: KHS-26 -PN: KMC-21 PN: KHS-22 PN: KHS-27 -- PN: KHS-7 --- Audio Accessories Tested PN: KHS-7A --- Face-held 4.68 W/kg 1g50% PTT duty cycle Occupational / Controlled Exposure Max. SAR Level(s) Evaluated Body-worn 7.62 W/kg 1g50% PTT duty cycle Occupational / Controlled Exposure FCC Spatial Peak SAR Limit Head/Body 8.0 W /kg 1g50% PTT duty cycle Occupational / Controlled Exposure Celltech Labs Inc. declares under its sole responsibility that this wireless portable device has demonstrated compliance with the Specific Absorption Rate (SAR) RF exposure requirements specified in FCC 47 CFR §2.1093 for the Occupational / Controlled Exposure environment. The device was tested in accordance with the measurement procedures specified in FCC OET Bulletin 65, Supplement C (Edition 01-01), IEEE Standard 1528-2003 and IEC International Standard 62209-1:2005. All measurements were performed in accordance with the SAR system manufacturer recommendations. I attest to the accuracy of data. All measurements were performed by me or were made under my supervision and are correct to the best of my knowledg e and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. This test report shall not be reproduced partially, or in full, without the prior written approval of Celltech Labs Inc. The results and statements contained in this report pertain only to the device(s) evaluated. Test Report Approved BySean JohnstonLab Manager Celltech Labs Inc. Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 2 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 TABLE OF CONTENTS 1.0 INTRODUCTION ________________________________________________________________________________ 4 2.0 SAR MEASUREMENT SYSTEM ___________________________________________________________________ 4 3.0 RF CONDUCTED OUTPUT POWER MEASUREMENTS ________________________________________________ 4 4.0 FCC POWER THRESHOLDS FOR PTT DEVICES (f< 0.5 GHz) _________________________________________ 5 5.0 SAR PROBE CALIBRATION & MEASUREMENT FREQUENCIES _______________________________________ 5 6.0 NO. OF TEST CHANNELS (N C ) ____________________________________________________________________ 6 7.0 MANUFACTURER’S DISCLOSED ACCESSORY LI…

Text truncated - open the document above for the full version.

Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 35 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 APPENDIX A - SAR MEASUREMENT DATA Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 36 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face SAR Plot #1 (F1) Date Tested: 08/17/2010 Face-held SAR – Li-Ion Battery KNB-45L - Stub Antenna KRA-17M - 490.0 MHz DUT: Kenwood TK-3312-1; Type: Portable FM UHF PTT Radio Transceiver; Serial: 1SU12 (Pre-production) Ambient Temp: 23.0°C; Fluid Temp: 23.5°C; Barometric Pressure: 101.1 kPa; Humidity: 35% Communication System: CW Frequency: 490 MHz; Duty Cycle: 1:1 Medium: HSL450 Medium parameters used: f = 490 MHz; ı = 0.87 mho/m; İ r = 42.4; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(7.25, 7.25, 7.25); Calibrated: 15/07/2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Barski Industries; Type: Fiberglas Planar; Serial: 03-01 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Face-held SAR - 2.5 cm Spacing from Front of DUT to Planar Phantom Area Scan (8x14x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (measured) = 4.93 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 78.1 V/m; Power Drift = -0.551 dB Peak SAR (extrapolated) = 7.19 W/kg SAR(1 g) = 5.12 mW/g; SAR(10 g) = 3.7 mW/g Maximum value of SAR (measured) = 5.38 mW/g  Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 37 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face SAR Plot #2 (F2) Date Tested: 08/17/2010 Face-held SAR – Li-Ion Battery KNB-45L - Stub Antenna KRA-17M2 - 484.0 MHz DUT: Kenwood TK-3312-1; Type: Portable FM UHF PTT Radio Transceiver; Serial: 1SU12 (Pre-production) Ambient Temp: 23.0°C; Fluid Temp: 23.5°C; Barometric Pressure: 101.1 kPa; Humidity: 35% Communication System: CW Frequency: 484 MHz; Duty Cycle: 1:1 Medium: HSL450 Medium parameters used (interpolated): f = 484 MHz; ı = 0.87 mho/m; İ r = 42.5; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(7.25, 7.25, 7.25); Calibrated: 15/07/2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Barski Industries; Type: Fiberglas Planar; Serial: 03-01 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Face-held SAR - 2.5 cm Spacing from Front of DUT to Planar Phantom Area Scan (8x14x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (measured) = 7.06 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 90.7 V/m; Power Drift = -0.224 dB Peak SAR (extrapolated) = 9.79 W/kg SAR(1 g) = 6.98 mW/g; SAR(10 g) = 5.07 mW/g Maximum value of SAR (measured) = 7.31 mW/g  Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 38 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face SAR Plot #3 (F3) Date Tested: 08/17/2010 Face-held SAR – Li-Ion Battery KNB-45L - Stub Antenna KRA-17M2 - 498.0 MHz DUT: Kenwood TK-3312-1; Type: Portable FM UHF PTT Radio Transceiver; Serial: 1SU12 (Pre-production) Ambient Temp: 23.0°C; Fluid Temp: 23.5°C; Barometric Pressure: 101.1 kPa; Humidity: 35% Communication System: CW Frequency: 498 MHz; Duty Cycle: 1:1 Medium: HSL450 Medium parameters used (interpolated): f = 498 MHz; ı = 0.878 mho/m; İ r = 42.5; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(7.25, 7.25, 7.25); Calibrated: 15/07/2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Barski Industries; Type: Fiberglas Planar; Serial: 03-01 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Face-held SAR - 2.5 cm Spacing from Front of DUT to Planar Phantom Area Scan (8x14x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (measured) = 7.89 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, …

Text truncated - open the document above for the full version.

Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 132 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Audio Accessory SAR Plot #38 (A38) Date Tested: 08/11/2010 Body-worn SAR – Li-Ion Battery KNB-45L - Stub Antenna KRA-17M2 – 512.0 MHz DUT: Kenwood TK-3312-1; Type: Portable FM UHF PTT Radio Transceiver; Serial: No. 1SU12 (Pre-production) Body-worn Accessory: Belt-Clip P/N: KBH-10; Audio Accessory: Speaker-Microphone P/N: KMC-48GPS Ambient Temp: 20.0°C; Fluid Temp: 22.5°C; Barometric Pressure: 101.1 kPa; Humidity: 35% Communication System: CW Frequency: 512 MHz; Duty Cycle: 1:1 Medium: M450 Medium parameters used (interpolated): f = 512 MHz; ı = 0.98 mho/m; İ r = 55.2; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(7.73, 7.73, 7.73); Calibrated: 15/07/2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Barski Industries; Type: Fiberglas Planar; Serial: 03-01 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Body-worn SAR - 1.3 cm Belt-Clip Spacing from Back of DUT to Planar Phantom Area Scan (8x14x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (measured) = 13.1 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 114.6 V/m; Power Drift = -0.317 dB Peak SAR (extrapolated) = 17.7 W/kg SAR(1 g) = 12.0 mW/g; SAR(10 g) 8.55 mW/g Maximum value of SAR (measured) = 12.6 mW/g  Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 133 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Audio Accessory SAR Plot #39 (A39) Date Tested: 08/11/2010 Body-worn SAR – Li-Ion Battery KNB-45L - Stub Antenna KRA-23M – 463.3 MHz DUT: Kenwood TK-3312-1; Type: Portable FM UHF PTT Radio Transceiver; Serial: No. 1SU12 (Pre-production) Body-worn Accessory: Belt-Clip P/N: KBH-10; Audio Accessory: Headset P/N: KHS-10-OH Ambient Temp: 20.0°C; Fluid Temp: 22.5°C; Barometric Pressure: 101.1 kPa; Humidity: 35% Communication System: CW Frequency: 463.3 MHz; Duty Cycle: 1:1 Medium: M450 Medium parameters used (interpolated): f = 463.3 MHz; ı = 0.94 mho/m; İ r = 55.7; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(7.73, 7.73, 7.73); Calibrated: 15/07/2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Barski Industries; Type: Fiberglas Planar; Serial: 03-01 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Body-worn SAR - 1.3 cm Belt-Clip Spacing from Back of DUT to Planar Phantom Area Scan (8x14x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (measured) = 8.46 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 97.8 V/m; Power Drift = -0.713 dB Peak SAR (extrapolated) = 11.8 W/kg SAR(1 g) = 8.0 mW/g; SAR(10 g) 5.77 mW/g Maximum value of SAR (measured) = 8.45 mW/g  Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 134 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Audio Accessory SAR Plot #40 (A40) Date Tested: 08/11/2010 Body-worn SAR – Li-Ion Battery KNB-45L - Stub Antenna KRA-23M – 463.3 MHz DUT: Kenwood TK-3312-1; Type: Portable FM UHF PTT Radio Transceiver; Serial: No. 1SU12 (Pre-production) Body-worn Accessory: Belt-Clip P/N: KBH-10; Audio Accessory: Ear-Bud P/N: KHS-23 Ambient Temp: 20.0°C; Fluid Temp: 22.5°C; Barometric Pressure: 101.1 kPa; Humidity: 35% Communication System: CW Frequency: 463.3 MHz; Duty Cycle: 1:1 Medium: M450 Medium parameters used (interpolated): f = 463.3 MHz; ı = 0.94 mho/m; İ r = 55.7; ȡ = 1000 kg/m 3 - Probe: ET3DV6 - SN1590; ConvF(7.73, 7.73, 7.73); Calibrated: 15/07/2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn353; Calibrated: 27/04/2010 - Phantom: Barski Industries; Type: Fiberglas Planar; Serial: 03-01 - Measurement SW: DASY4, V4.7 Build 44; Postprocessing SW: SEMCAD, V1.8 Build 171 Body-worn SAR - 1.3 cm Belt-Clip Spacing from Back of DUT to Planar Phantom Area Scan (8x14x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (measured) = 8.21 mW/g Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 99.4 V/m; Power Drift = -0.560 dB Peak SAR (extrapolated) = 12.2 W/kg SAR(1 g) = 8.21 mW/g; SAR(10 g) 5.81 mW/g Maximum value of SAR (measured) = 8.52 mW/g  Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio…

Text truncated - open the document above for the full version.

Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 273 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 APPENDIX D - SAR TEST SETUP & DUT PHOTOGRAPHS Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 274 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 Face-held SAR Test Setup Configuration with Stub Antenna Face-held SAR Test Setup Configuration with Whip Antenna FACE-HELD SAR TEST SETUP PHOTOGRAPHS Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 275 of 309 Date(s) of Evaluation Aug. 05 - Sept. 07, 2010 Test Report Serial No. 080310ALH-T1037-S90U Test Report Revision No. Rev. 1.0 (Initial Release) Test Report Issue Date October 26, 2010 Description of Test(s) Specific Absorption Rate RF Exposure Category Occupational (Controlled) Test Lab Certificate No. 2470.01 DUT with Stub Antenna P/N: KRA-17M (A) - 2.5 cm Air-Gap Spacing - Battery Housing Parallel to Phantom DUT with Stub Antenna P/N: KRA-17M2 (B) - 2.5 cm Air-Gap Spacing - Battery Housing Parallel to Phantom FACE-HELD CONFIGURATION 2.5 cm 3.3 cm 3.3 cm 3.4 cm 2.5 cm 3.3 cm 3.3 cm 3.4 cm Applicant: Kenwood USA Corporation FCC ID: ALH413800 Freq. Range: 450 - 512 MHz DUT Type: Portable FM UHF PTT Radio Transceiver DUT Models: TK-3312-1 TK-3317-1 2010 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written per…

Text truncated - open the document above for the full version.