ASL-SST3050XNavigational Radar Pedestal/Transceiver

Anschütz GmbH Zeyestr. 16-24 24106 Kiel Germany www.anschuetz.com Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA 02.06.2026 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: ASL-SST3050X TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Anschütz GmbH is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, _______________ (signature & company stamp) <Anschütz GmbH> <FCC Registration Number – FRN 0009629890> <Zeyestraße 16-24, 24106 Kiel, Germany> <Robert Zissen> <+4943130190> <[email protected]>

Anschütz GmbH Zeyestr. 16-24 24106 Kiel Germany www.anschuetz.com Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA <2025-11-21> Attestation Statement according to 2.911(d)(7) FCC ID: ASL-SST3050X and ASL-SST3051S TO WHOM IT MAY CONCERN: We, Anschuetz GmbH, designate Anschuetz USA Inc. to act as U.S. agent for service of process. Anschuetz USA Inc. hereby acknowledges the obligation of the U.S. agent for service of process. Further Anschuetz GmbH accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Sincerely _______________ (signature & company stamp) Anschuetz GmbH FCC Registration Number – 0009629890 Zeyestrasse 16-24 24106 Kiel, Germany Robert Zissen +49 431 3019-0 [email protected]> _______________ (signature & company stamp) Anschuetz USA Inc. FCC Registration Number – 0037757283 6700 Rockledge Drive, Suite 260 Bethesda, MD 20817, USA Matthias Buescher +1 240 234 3130 [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 <2026-06-02> TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b) (4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name ASL-SST3050X X-Band Pedestal AN3050SST For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Description The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device, which is planned for <DATE (max. up to 180 days after grant date)> If you have any questions, please feel free to contact me at the address shown below. Sincerely, (Signed) Name / Title: Robert Zissen Company: Anschütz GmbH Address: Zeyestraße 16-24, 24106 Kiel, Germany Phone: +49 431 30190 Fax: --- E-Mail: [email protected]

Benennung Zeichnungsnummer Name Ausgabedatum Ver. Änderung Maßstab Blatt von Erstellt durch Genehmigt von Für diese technische Unterlage behalten wir uns alle Rechte vor. For this technical document all rights reserved. A 2143 B C D A4-E Id.Nr. CAD: Allgemeintoleranz Werkstoff E Pro/E 3503889 1:1 ISO 2768 - mK 1750056 Schild 35x67 WN 166-20 FCC-Schild, SST-X-Band Rüter Zissen 720-001.00-001 1 00 500000048533 04.05.26Rüter 1 Schrift: Schwarz, DIN 1451-1 E 3,5

© cetecom advanced GmbH Page 1 of 3 Maximum Permissible Exposure (MPE) & Exposure evaluation Report identification number: 1-0697-25-01-04_TR1-R02 MPE (FCC_ISED) Certification numbers and labeling requirements ISED number 20155-SST3050X FCC ID ASL-SST3050X HVIN (Hardware Version Identification Number) SST X-Band Pedestal PMN (Product Marketing Name) SST X-Band Pedestal FVIN (Firmware Version Identification Number) -/- HMN (Host Marketing Name) -/- This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorised: Alexander Hnatovskiy Eric Tüttmann Lab Manager Testing Manager Radio Labs Radio Labs Report no.: 1-0697-25-01-04_TR1-R02 © cetecom advanced GmbH Page 2 of 3 EUT technologies: Technologies: Max. power [dBm] Antenna gain max.: [dBi] # conducted EIRP 9.3-9.5 GHz Radar 34.1 64.1 30 A,C Details and origins of the measurements shown in the table above: # Results from: Additional information A 1-0697-25-01_02_TR1-R01 cetecom advanced GmbH Cond. FCC page 22, 34.1 dBm B 1-0697_25-01-03_TR1-R01 cetecom advanced GmbH Cond. ISED page 42, 33.9 dBm C DMTA00074223 - SW- SSD - SSR Operation Mode OEM Customer documentation Antenna Info, pg. 5, 30 dBi Minimum safety distance declared by manufacturer: 460 cm Prediction of MPE limit at given distance - FCC S = PG / 4π R 2 where: S = Power density P = Power input to the antenna G = Antenna gain R = Distance to the center of radiation of the antenna PG = Output power including antenna gain (EIRP) The table below is excerpted from Table 1 - Limits for Maximum Permissible Exposure (MPE) - “General Population/Uncontrolled Exposure” according according FCC 19-126A1 Frequency Range (MHz) Power Density (mW/cm 2 ) Averaging Time (minutes) 1500 – 3 000 000 1.0 30 where f = Frequency (MHz) Report no.: 1-0697-25-01-04_TR1-R02 © cetecom advanced GmbH Page 3 of 3 Prediction: worst case Technology RADAR Frequency 9300 MHz P·G Meas. EIRP 64.1 dBm R Distance 460 cm S MPE limit for uncontrolled exposure 1.0 mW/cm 2 Calculated Power density: 0.9672 mW/cm² Calculated percentage of limit: 96.72% This prediction demonstrates the following: The power density levels for FCC at a distance of 460 cm are below the maximum levels allowed by regulations. Prediction of MPE limit at given distance - ISED RSS-102, Issue 6, chapter 6 Reference levels for general public (uncontrolled environment): According to: RSS 102-ISSUE 06 Frequency Range (MHz) Electric Field (V/m rms) Magnetic Field (A/m rms) Power Density (W/m²) Reference Period (minutes) 10-20 27.46 0.0728 2 6 20-48 58.07/ ƒ 0.25 0.1540/ ƒ 0.25 8.944/ ƒ 0.5 6 48-300 22.06 0.05852 1.291 6 300-6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.3417 6 6000-15000 61.4 0.163 10 6 15000-150000 61.4 0.163 10 616000 / ƒ 1.2 150000-300000 0.158 ƒ 0.5 4.21 x 10 -4 ƒ 0.5 6.67 x 10 -5 ƒ 616000 / ƒ 1.2 Note: f is frequency in MHz. Prediction: worst case TechnologyRADAR Frequency9300MHz P·GMeas. EIRP64.1dBm RDistance460cm SMPE limit for uncontrolled exposure10.00 W/m 2 Calculated Power density:9.672W/m² Calculated percentage of limit:96.72% Conclusion: RF exposure evaluation is not required.

TEST REPORT Test report no.: 1-0697-25-01-02-TR1-R01 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00 Anschütz GmbH Zeyestraße 16-24 24106 Kiel / GERMANY Contact: Carsten Reiter e-mail: [email protected] Phone: +49 (0)431 301 9866 Manufacturer Anschütz GmbH Zeyestraße 16-24 24106 Kiel / GERMANY Test standard/s FCC - Title 47 CFR Part 80 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 80 - Stations in the Maritime Services FCC - Title 47 CFR Part 15B FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Subpart B - Unintentional Radiators Test Item Kind of test item: Shipborne Radar X-Band Down-System Model name: Anschütz SST(X-Band) FCC-ID: ASL-SST3050X Frequency range: 9.3 – 9.5 GHz Tx power conducted: 100 W (nominal peak power) Power Supply: 100-240 V AC Temperature Range: -30°C to +55°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Meheza Walla Thomas Vogler Lab Manager Lab Manager Radio Labs Radio Labs Test report no.: 1-0697-25-01-02-TR1-R01 Page 2 of 47 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General information ......................................................................................................................................... 3 2.1 Notes and disclaimer ............................................................................................................................ 3 2.2 Application details ................................................................................................................................ 3 2.3 Involved test locations .......................................................................................................................... 4 2.4 Test laboratories sub-contracted ......................................................................................................... 4 2.5 Laboratory listings and recognitions .................................................................................................... 4 3 Test standards and references ........................................................................................................................ 5 3.1 Test standards ...................................................................................................................................... 5 4 Reporting statements of conformity – decision rule .................................................................................. 6 5 Test environment ............................................................................................................................................. 6 6 Test item .......................................................................................................................................................... 7 6.1 General Description ............................................................................................................................... 7 6.2 List of components ............................................................................................................................... 7 6.3 Antenna system(s) ................................................................................................................................ 7 6.4 Operating conditions ............................................................................................................................. 8 6.5 Additional information .......................................................................................................................... 9 7 Description of the test setup .......................................................................................................................... 10 7.1 Shielded semi anechoic chamber ....................................................................................................... 11 7.2 Shielded fully anechoic chamber ........................................................................................................ 13 7.3 Conducted measurements .................................................................................................................. 15 7.4 AC conducted ...................................................................................................................................... 16 7.5 Radiated measurements > 18 GHz...................................................................................................... 17 7.6 Sequence of testing radiated spurious 9 kHz to 30 MHz ................................................................... 18 7.7 Sequence of testing radiated spurious 30 MHz to 1 GHz .................................................................. 19 7.8 Sequence of testing radiated spurious 1 GHz to 18 GHz ................................................................... 20 7.9 Sequence of testing radiated spurious above 18 GHz ....................................................................... 21 7.10 EUT set-up ....................................................................................................................................... 22 7.11 Test environment...........................................................…

Text truncated - open the document above for the full version.

Test report no.: 1-0697-25-01-02_TR1-A201-R01 © cetecom advanced GmbH Page 1 of 39 Annex TR1-A201 This test report annex is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report annex authorized: Thomas Vogler Lab Manager Radio Labs Test report no.: 1-0697-25-01-02_TR1-A201-R01 © CTC advanced GmbH Page 2 of 39 1 Table of contents 1 T a b l e o f c o n t e n t s .................................................................................................. 2 2 M e a s u r e m e n t r e s u l t s , F C C P a r t 8 0 ......................................................................... 3 3 M e a s u r e m e n t r e s u l t s , S p u r i o u s e m i s s i o n s 3 0 M H z - 1 8 G H z .................................. 31 4 M e a s u r e m e n t r e s u l t s , A C P o w e r L i n e C o n d u c t e d E m i s s i o n L i m i t s ....................... 36 5 D o c u m e n t h i s t o r y ................................................................................................ 39 Test report no.: 1-0697-25-01-02_TR1-A201-R01 © CTC advanced GmbH Page 3 of 39 2 Measureme nt resu lts, F CC Part 80 This chapter consists of 28 pages including this page. Test report no.: 1-0697-25-01-02_TR1-A201-R01 © CTC advanced GmbH Page 4 of 39 Plot No. 1 Subclause: -/- Function test, frequency and power Short pulse / medium pulse / long pulse Measurement within the allocated band: 9.3 - 9.5 GHz Limit: no limits defined This test serves to verify the general function of the EUT and to orientate regarding to the spurious emissions which are expected within the band, furthermore for comparison of the measured power with the rated value. Test results: see plot (an explicit table was not generated) Operating condition of DUT: operating condition 1, see test report chapter 6.4 channel 0, mode 12NM Test setup: see test report chapter 7.3: cdhgj Test equipment: see test report chapter 6.x: C107, R001, U214, W240, W242 Remark: Test result: measurement for orientation Environment condition: Date & Time: Tue 16/Sep/2025 11:36:50 Location: Cetecom advanced GmbH, Laboratory RC8G Temperature: 22 °C Humidity: 55 % Voltage: 115 Vac Setup of measurement equipment: Start frequency: 9.3 GHz Stop frequency: 9.5 GHz Center frequency: 9.4 GHz Frequency span: 200 MHz Resolution-BW: 1 MHz Video-BW: 3 MHz Input attenuation: 20 dB Trace-Mode: Clear Write Detector-Mode: Pos Peak Correction: Directional coupler (W240) + 43.9 dB Coaxial cable (C107) + 3.3 dB DUT-Antenna + 0.0 dBi Test antenna + 0.0 dB BW correction factor + 0.0 dB Atten. between HPA and feedhorn - 0.0 dB Attenuation (U214) + 9.5 dB TOTAL CORRECTION: + 56.7 dB Remarks: Test of general function of the EUT and measurement for orientation Test report no.: 1-0697-25-01-02_TR1-A201-R01 © CTC advanced GmbH Page 5 of 39 Plot No. 2 Subclause: -/- Function test, frequency and power Short pulse / medium pulse / long pulse Measurement within the allocated band: 9.3 - 9.5 GHz Limit: no limits defined This test serves to verify the general function of the EUT and to orientate regarding to the spurious emissions which are expected within the band, furthermore for comparison of the measured power with the rated value. Test results: see plot (an explicit table was not generated) Operating condition of DUT: operating condition 1, see test report chapter 6.4 channel 3, mode 12NM Test setup: see test report chapter 7.3: cdhgj Test equipment: see test report chapter 6.x: C107, R001, U214, W240, W242 Remark: Test result: measurement for orientation Environment condition: Date & Time: Tue 16/Sep/2025 11:37:28 Location: Cetecom advanced GmbH, Laboratory RC8G Temperature: 22 °C Humidity: 55 % Voltage: 115 Vac Setup of measurement equipment: Start frequency: 9.3 GHz Stop frequency: 9.5 GHz Center frequency: 9.4 GHz Frequency span: 200 MHz Resolution-BW: 1 MHz Video-BW: 3 MHz Input attenuation: 20 dB Trace-Mode: Clear Write Detector-Mode: Pos Peak Correction: Directional coupler (W240) + 43.9 dB Coaxial cable (C107) + 3.3 dB DUT-Antenna + 0.0 dBi Test antenna + 0.0 dB BW correction factor + 0.0 dB Atten. between HPA and feedhorn - 0.0 dB Attenuation (U214) + 9.5 dB TOTAL CORRECTION: + 56.7 dB Remarks: Test of general function of the EUT and measurement for orientation Test report no.: 1-0697-25-01-02_TR1-A201-R01 © CTC advanced GmbH Page 6 of 39 Plot No. 3 Subclause: -/- Function test, frequency and power Short pulse / medium pulse / long pulse Measurement within the allocated band: 9.3 - 9.5 GHz Limit: no limits defined This test serves to verify the general function of the EUT and to orientate regarding to the spurious emissions which are expected within the band, furthermore for comparison of the measured power with the rated value. Test results: see plot (an explicit table was not generated) Operating condition of DUT: operating condition 1, see test report chapter 6.4 channel 6, mode 12NM Test setup: see test report chapter 7.3: cdhgj Test equipment: see test report chapter 6.x: C107, R001, U214, W240, W242 Remark: Test result: measurement for orientation Environment condition: Date & Time: Tue 16/Sep/2025 11:38:08 Location: Cetecom advanced GmbH, Laboratory RC8G Temperature: 22 °C Humidity: 55 % Voltage: 115 Vac Setup of measurement equipment: Start frequency: 9.3 GHz Stop frequency: 9.5 GHz Center frequency: 9.4 GHz Frequency span: 200 MHz Resolution-BW: 1 MHz Video-BW: 3 MHz Input attenuation: 20 dB Trace-Mode: Clear Write Detector-Mode: Pos Peak Correction: Directional coupler (W240) + 43.9 dB Coaxial cable (C107) + 3.3 dB DUT-Antenna + 0.0 dBi Test antenna + 0.0 dB BW correction factor + 0.0 dB Atten. between HPA and feedhorn - 0.0 dB Attenuation (U214) + 9.5 dB TOTAL CORRECTION: + 56.7 dB Remarks: Test of general function of the EUT and measurement for orientation Test report no.: 1-0697-25-01-02_TR1-A201-R01 © CTC advanced GmbH Page 7 of 39 Plot No. 4…

Text truncated - open the document above for the full version.

This document is submitted in confidence and contains proprietary information which shall not be reproduced or transferred to others for the purpose of manufacture, tender or any other intentions without written permission of ANCS. 2023-10-13 DMTA00074223-03B-Approved Page 1 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential SSR Operation Mode OEM Software Detailed Design NACOS Platinum - Transceiver Document Id. DMTA00074223 Revision 03B-Approved Date 2023-10-13 Classification Confidential Author Reviewer Approver Name Bolls, Kevin Meyerhoff, Marc Oliver Hanisch, Kai Signature 13/10/2023 X Bolls Bolls, Kevin Signed by: Bolls, Kevin 13/10/2023 X Meyerhoff Meyerhof, Marc Oliver Signed by: Meyerhoff, Marc Oliver 13/10/2023 X Hanisch Hanisch, Kai Signed by: Hanisch, Kai SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 2 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED Section Table Of Contents Page 1 REVISIONS ................................................................................................................................................................. 3 2 REFERENCED DOCUMENTS ........................................................................................................................................ 3 3 INTRODUCTION ......................................................................................................................................................... 4 3.1 PURPOSE ....................................................................................................................................................................... 4 3.2 INTENDED AUDIENCE ....................................................................................................................................................... 4 4 BASIC SYSTEM PARAMETERS ..................................................................................................................................... 5 4.1 ANTENNA ...................................................................................................................................................................... 5 4.2 TRANSMITTER ................................................................................................................................................................ 5 4.2.1 Modulation Scheme............................................................................................................................................ 5 4.3 RECEIVER ...................................................................................................................................................................... 5 5 OPERATING MODES .................................................................................................................................................. 6 5.1 OPERATION MODE 12NM ............................................................................................................................................... 7 5.2 OPERATION MODE 24NM ............................................................................................................................................... 7 5.3 OPERATION MODE 48NM ............................................................................................................................................... 8 5.4 OPERATION MODE RACON ............................................................................................................................................. 8 SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 3 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED 1 Revisions REV. DATE CHANGES NAME ORGANISATION 01A 2023-08-31 First Draft Bolls ANDR 01B 2023-09-07 Change internal sample rate for short pulse range in 24NM operat- ing mode to 2.89; Change number of output sweep per scan to 2048; Change PTRF Bolls ANDR 02A 2023-09-14 Harmonize RACON and BEACON Improve description for S1, S2, M1, M2, L1, L2 and L3 pulse. Merge content with document DMTA00071386 Bolls ANDR 03A 2023-09-27 Update information about sample log scale and reference power in Table 3 Bolls ANDR 03B 2023-10-12 Change name Beacon to Racon Change document template Bolls ANDR Table 1 2 Referenced Documents REF. DOCUMENT NO. REV. SOURCE DOCUMENT TITLE Table 2 SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 4 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED 3 Introduction 3.1 Purpose The purpose of this document is to describe the operation modes used by the NACOS Platinum Solid State X-Band Transceivers configured in OEM version. The intention is to use the same oper- ating mode for Solid State S-Band transceiver too. 3.2 Intended audience This document is intended for research and development as well as test and release stake holders. SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 5 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED 4 Basic System Parameters This chapter describes the basic system parameter of the antenna (see section 4.1), transmitter (see section 4.2) and the receiver (see section 4.3). 4.1 Antenna  Rotation speed ~24 rpm  Azimuth opening angle o 0.95° X-Band 8 ft. o 1.5° X-Band 5ft. o 1.9° S-Band 14 ft.  27 dBi to 30 dBi  Wideband end-fed narrow wall slotted waveguide design 4.2 Transmitter  Peak Output Power > 100W (X-Band), ~200W (S-Band), Duty Cycle max. 10%  Transmit Frequency Band 2900 MHz – 3100 MHz (S-Band)  Transmit Frequency Band 9300 MHz – 9500 MHz (X-Band) 4.2.1 Modulation Scheme  Multi-Pulse Transmission Frames (Up to 3 pulses per frame)  Unmodulat…

Text truncated - open the document above for the full version.

This document is submitted in confidence and contains proprietary information which shall not be reproduced or transferred to others for the purpose of manufacture, tender or any other intentions without written permission of ANCS. 2023-10-13 DMTA00074223-03B-Approved Page 1 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential SSR Operation Mode OEM Software Detailed Design NACOS Platinum - Transceiver Document Id. DMTA00074223 Revision 03B-Approved Date 2023-10-13 Classification Confidential Author Reviewer Approver Name Bolls, Kevin Meyerhoff, Marc Oliver Hanisch, Kai Signature 13/10/2023 X Bolls Bolls, Kevin Signed by: Bolls, Kevin 13/10/2023 X Meyerhoff Meyerhof, Marc Oliver Signed by: Meyerhoff, Marc Oliver 13/10/2023 X Hanisch Hanisch, Kai Signed by: Hanisch, Kai SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 2 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED Section Table Of Contents Page 1 REVISIONS ................................................................................................................................................................. 3 2 REFERENCED DOCUMENTS ........................................................................................................................................ 3 3 INTRODUCTION ......................................................................................................................................................... 4 3.1 PURPOSE ....................................................................................................................................................................... 4 3.2 INTENDED AUDIENCE ....................................................................................................................................................... 4 4 BASIC SYSTEM PARAMETERS ..................................................................................................................................... 5 4.1 ANTENNA ...................................................................................................................................................................... 5 4.2 TRANSMITTER ................................................................................................................................................................ 5 4.2.1 Modulation Scheme............................................................................................................................................ 5 4.3 RECEIVER ...................................................................................................................................................................... 5 5 OPERATING MODES .................................................................................................................................................. 6 5.1 OPERATION MODE 12NM ............................................................................................................................................... 7 5.2 OPERATION MODE 24NM ............................................................................................................................................... 7 5.3 OPERATION MODE 48NM ............................................................................................................................................... 8 5.4 OPERATION MODE RACON ............................................................................................................................................. 8 SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 3 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED 1 Revisions REV. DATE CHANGES NAME ORGANISATION 01A 2023-08-31 First Draft Bolls ANDR 01B 2023-09-07 Change internal sample rate for short pulse range in 24NM operat- ing mode to 2.89; Change number of output sweep per scan to 2048; Change PTRF Bolls ANDR 02A 2023-09-14 Harmonize RACON and BEACON Improve description for S1, S2, M1, M2, L1, L2 and L3 pulse. Merge content with document DMTA00071386 Bolls ANDR 03A 2023-09-27 Update information about sample log scale and reference power in Table 3 Bolls ANDR 03B 2023-10-12 Change name Beacon to Racon Change document template Bolls ANDR Table 1 2 Referenced Documents REF. DOCUMENT NO. REV. SOURCE DOCUMENT TITLE Table 2 SSR Operation Mode OEM Software Detailed Design Automation & Navigation Classification: Confidential 2023-10-13 DMTA00074223-03B-Approved Page 4 of 8 UNCONTROLLED COPY ONCE PRINTED OR DOWNLOADED 3 Introduction 3.1 Purpose The purpose of this document is to describe the operation modes used by the NACOS Platinu…

Text truncated - open the document above for the full version.