ATMLB401Bluetooth Module

Date: 2013-06-27 FCC ID: ATMLB401 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------- Name: Wataru Komine / Title:QA General Manager Onkyo Corporation Tel: 81-72-831-8073 Fax: 81-72-831-8069 E-mail: [email protected]

Date: 2013-06-27 FCC ID: ATMLB401 AUTHORIZATION LETTER To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months from original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, ----------------------------------- Name: Wataru Komine / Title:QA General Manager Onkyo Corporation Tel: 81-72-831-8073 Fax: 81-72-831-8069 E-mail: [email protected]

FCC ID: ATMLB401 Report No.: RF 130418C02 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch July 11, 2013 Dear Application Examiner, Onkyo Corporation, FCC ID: ATMLB401 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip GT966x. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is GT966x. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: ATMLB401 Report No.: RF 130418C02 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Robert Huang Senior Engineer Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

Page 3

FCC ID: ATMLB401 Report No.: RF130617C20 OPERATIONAL DESCRIPTION The transmitter of the EUT (bluetooth module) is powered from 3.3Vdc from host equipment. The antenna is PIFA antenna with UFL antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA120801C27A 1 of 5 Report Format Version 5.0.0 Reference No.: 120801C27, 130617C20 RF EXPOSURE REPORT REPORT NO.: SA120801C27A MODEL NO.: GT9660A1 FCC ID: ATMLB401 RECEIVED: Aug. 01, 2012 TESTED: Aug. 08 ~ Aug. 18, 2012 ISSUED: Jun. 20, 2013 APPLICANT: Onkyo Corporation ADDRESS: 2-1, Nisshin-cho, Neyagawa-Shi, Osaka 572-8540, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA120801C27A 2 of 5 Report Format Version 5.0.0 Reference No.: 120801C27, 130617C20 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................. 3 1. CERTIFICATION .............................................................................................................. 4 2. RF EXPOSURE ................................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) .......................................... 5 2.2 MPE CALCULATION FORMULA ..................................................................................... 5 2.3 CLASSIFICATION ............................................................................................................ 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ................................... 5 Report No.: SA120801C27A 3 of 5 Report Format Version 5.0.0 Reference No.: 120801C27, 130617C20 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120801C27A Original release Jun. 20, 2013 Report No.: SA120801C27A 4 of 5 Report Format Version 5.0.0 Reference No.: 120801C27, 130617C20 1. CERTIFICATION PRODUCT: bluetooth module MODEL NO.: GT9660A1 BRAND: ONKYO APPLICANT: Onkyo Corporation TESTED: Aug. 08 ~ Aug. 18, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: GT9660A1) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Jun. 20, 2013 Jemma Yang / Specialist APPROVED BY : , DATE :Jun. 20, 2013 Ken Liu / Senior Manager Report No.: SA120801C27A 5 of 5 Report Format Version 5.0.0 Reference No.: 120801C27, 130617C20 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) Bluetooth EDR 11.05 1 20 0.0032 1 Bluetooth LE 4.0 2.78 1 20 0.0005 1

Report No.: RF120801C27A 1 of 68 Report Format Version 5.1.0 Reference No.: 120801C27, 130617C20 FCC TEST REPORT REPORT NO.: RF120801C27A MODEL NO.: GT9660A1 FCC ID: ATMLB401 RECEIVED: Aug. 01, 2012 TESTED: Aug. 08 ~ Aug. 18, 2012 ISSUED: Jun. 20, 2013 APPLICANT: Onkyo Corporation ADDRESS: 2-1, Nisshin-cho, Neyagawa-Shi, Osaka 572-8540, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120801C27A 2 of 68 Report Format Version 5.1.0 Reference No.: 120801C27, 130617C20 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 5 1. CERTIFICATION ....................................................................................................... 6 2. SUMMARY OF TEST RESULTS .............................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 8 3. GENERAL INFORMATION ....................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 9 3.2 DESCRIPTION OF TEST MODES ......................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 15 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................... 16 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 16 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ...................................... 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 17 4.1.2 TEST INSTRUMENTS ........................................................................................... 18 4.1.3 TEST PROCEDURES ............................................................................................ 19 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 19 4.1.5 TEST SETUP ......................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 20 4.1.7 TEST RESULTS ..................................................................................................... 21 4.2 CONDUCTED EMISSION MEASUREMENT ......................................................... 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 30 4.2.2 TEST INSTRUMENTS ........................................................................................... 30 4.2.3 TEST PROCEDURES ............................................................................................ 31 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 31 4.2.5 TEST SETUP ......................................................................................................... 32 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 32 4.2.7 TEST RESULTS ..................................................................................................... 33 4.3 NUMBER OF HOPPING FREQUENCY USED ...................................................... 35 4.3.1 LIMIT OF HOPPING FREQUENCY USED ............................................................ 35 4.3.2 TEST SETUP ......................................................................................................... 35 4.3.3 TEST INSTRUMENTS ........................................................................................... 35 4.3.4 TEST PROCEDURES ............................................................................................ 35 4.3.5 DEVIATION FROM TEST STANDARD .................................................................. 35 4.3.6 TEST RESULTS ..................................................................................................... 35 4.4 DWELL TIME ON EACH CHANNEL ............................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4