AX2P2301Car Audio

Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: Feb-27-2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: AX2P2301 Faurecia Clrion Electronics Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, Clarion Corporation of America (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: Faurecia Clarion Electronics Co., Ltd. Contact Person: Makoto Okubo Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Email: [email protected] FCC FRN: 0012512836 U.S. Agent Company Name: Clarion Corporation of America Contact Person: Sattar Niyaz Address: 15951 Technology Drive, Northville, MI 48168, USA Tel.: M +1 248.912.8905 Email: [email protected] FCC FRN: 0022540678 Sincerely yours, The Applicant The Agent Company Name Faurecia Clarion Electronics Co., Ltd. Clarion Corporation of America Contact Person Makoto Okubo Sattar Niyaz Signature

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: Feb-21-2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: AX2P2301 [Faurecia Clarion Electronics Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Makoto Okubo Title: Lead Engineer Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Email: [email protected]

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: Feb-21-2024 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: AX2P2301 [Faurecia Clarion Electronics Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Makoto Okubo Title: Lead Engineer Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Email: [email protected]

MS-0044715 Page 1 of 1 Revision 1 5acXjzUk Date: March 13, 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: AX2P2301 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune‐Up Procedure Short Term Permanent User’s Manual Short Term Permanent Part List/ Antenna Gain Information Datasheet Faurecia Clarion Electronics Co., Ltd. (Applicant)has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short‐Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04‐1705. Sincerely, By: ______________________________ / Lead Engineer__ _____Makoto Okubo_____ (Signature/Title) (Print name) Tel: +81-48-601-3700 Email: [email protected]

Product label for FCC Product label for ISED Label pasting location Top View Unit of length [mm] Label Material: White print-treated polyesterLabel Adhesive: S-333 (acrylic adhesive) 70 95 5 ① SETPLATE 70 2.1 95 67.7 Product label 70 95

1 Safety Human Exposure 1.1 Radio Frequency Exposure Compliance 1.1.1 Electromagnetic Fields RESULT: Pass Report Number : JP23VU3C 004 Test Specification Test item : Car Audio Identification / Type No. : P2301 FCC ID : AX2P2301 IC: 419C-P2301 Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 D01 v06 FCC KDB Publication 865664 D02 v01r02 RSS-102 Issue 6 December 2023 1.1.1.1 RF Exposure Compliance Requirement for FCC FCC requirement: Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 20cm normally can be maintained between the user and the device. Max -0.40 dBi for Bluetooth Max -1.15 dBi for 2.4GHz Wi-Fi Max -0.35 dBi for 5.8GHz Wi-Fi ➢ Radio Frequency Exposure Limit Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm²) 300-1,500 -- -- f/1500 1,500-100,000 -- -- 1.0 ➢ Radio Frequency Exposure Calculation Formula a) RF Exposure Evaluation standalone operations (worse case) Mode *Measured RF Output Power (dBm) EIRP (dBm) Distance (cm) Power Density (mW/cm²) FCC Limit (mW/cm²) Bluetooth 2.01 1.71 20 0.0003 1.0 2.4G Wi-Fi 19.21 18.06 20 0.0127 1.0 5.8 G Wi-Fi 9.64 9.29 20 0.0017 1.0 Note: 1. 2.4GHz Band RF Output Power: Refer to JP23VU3C 001& JP23VU3C 002. 2. 5.8GHz Band RF Output Power: Refer to JP23VU3C 003. b) Simultaneous Transmission operation mode Mode Sum Radio Limit Bluetooth+5.8 G Wi-Fi 0.002 <1 Bluetooth+2.4 G Wi-Fi 0.013 <1 Note: 1. The 2.4GHz Wi-Fi and 5.8G Wi-Fi of EUT cannot transmitting sync. ➢ Conclusion Therefore, the maximum calculations result of above are meet the requirement of Radio Frequency Exposure (MPE) limit. 1.1.1.2 RF Exposure Compliance Requirement for IC The EUT shall comply with the requirement of RSS-102 section 5.3.2 Electric field strength levels, magnetic field strength levels and power density levels (10 MHz to 300 GHz) The electric and magnetic field strength reference levels, power density reference levels, and associated reference period for devices employed by the general public (uncontrolled environment) and controlled-use devices (controlled environment) are specified in below table. Note that the power density limits specified in these tables apply to whole body exposure conditions. Frequency range (MHz) Electric field (V RMS /m) Magnetic field (A RMS /m) Power density (W/m 2 ) Reference period (minutes) 10-20 27.46 0.0728 2 6 20-48 58.07 /f 0.25 0.1540 /f 0.25 8.944 /f 0.5 6 48-300 22.06 0.05852 1.291 6 300-6000 3.142f 0.3417 0.008335f 0.3417 0.02619f 0.6834 6 6000-15000 61.4 0.163 10 6 15000-150000 61.4 0.163 10 616000/f 1.2 150000-300000 0.158f 0.5 4.21×10 -4 f 0.5 6.67×10 -5 f 616000/f 1.2 Note: ƒ is frequency in MHz. a) RF Exposure Calculations for ISED, Stand-alone mode Mode *Measured RF Output Power (dBm) EIRP (dBm) Distance (cm) Power Density (W/m²) IC Limit (W/m²) Bluetooth 2.01 1.71 20 0.0003 5.35 2.4G Wi-Fi 19.21 18.06 20 0.0127 5.35 5.8 G Wi-Fi 9.64 9.29 20 0.0017 9.77 Note: 1. 2.4GHz Band RF Output Power: Refer to JP23VU3C 001& JP23VU3C 002. 2. 5.8GHz Band RF Output Power: Refer to JP23VU3C 003. b) Simultaneous Transmission operation mode Mode Sum Radio Limit Bluetooth+5.8 G Wi-Fi 0.0022 <1 Bluetooth+2.4 G Wi-Fi 0.0024 <1 Note: 1. The 2.4GHz Wi-Fi and 5.8G Wi-Fi of EUT cannot transmitting sync. ➢ Conclusion “RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.”

Antenna Description_P2301 Confidential Antenna Type:Dielectric Chip Antenna Antenna Manufacturer:AMOTECH Part Number:AMAN301512ST01 (Bluetooth) AMOCA3H15F7PA (WLAN Dualband 2.4GHz/5GHz) Antenna location: Simulation result: 1. Simulated VSWR and Isolation 2. Simulated antenna gain table Simulated VSWR of BTSimulated VSWR of Dual WLAN Simulated isolation WLAN Dualband Antenna BluetoothAntenna 3. Radiation patterns - 2.4 GHz band for BT antenna - 2.4 GHz band for WLAN antenna - 5 GHz band for WLAN antenna

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: JP23VU3C 002 Auftrags-Nr.: Order no.: 168457367 Seite 1 von 21 Page 1 of 21 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2024-01-05 Auftraggeber: Client: Faurecia Clarion Electronics Co., Ltd. 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Prüfgegenstand: Test item: Car Audio Bezeichnung / Typ-Nr.: Identification / Type no.: P2301 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR47 FCC Part 15: Subpart C Section 15.247 RSS-247 Issue 3 August 2023 RSS-Gen Issue 5 February 2021 Wareneingangsdatum: Date of sample receipt: 2024-01-10 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003635657-001~002 Prüfzeitraum: Testing period: 2024-01-10 - 2024-02-29 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Jonathan Li genehmigt von: authorized by: X Signed by: Bell Hu Datum: Date: 2024-03-06 Ausstellungsdatum: Issue date: 2024-03-06 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: AX2P2301 IC: 419C-P2301, HVIN: P2301 This report is for 2.4G Wi-Fi function. Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 17-18F, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P. R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: JP23VU3C 002 Test report no.: Seite 2 von 21 Page 2 of 21 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unle…

Text truncated - open the document above for the full version.