AX2P2601Car Audio

Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: July 15, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: AX2P2601 Faurecia Clrion Electronics Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, Clarion Corporation of America (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: Faurecia Clarion Electronics Co., Ltd. Contact Person: Makoto Okubo Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Email: [email protected] FCC FRN: 0012512836 U.S. Agent Company Name: Clarion Corporation of America Contact Person: Sattar Niyaz Address: 15951 Technology Drive, Northville, MI 48168, USA Tel.: M +1 248.912.8905 Email: [email protected] FCC FRN: 0022540678 Sincerely yours, The Applicant The Agent Company Name Faurecia Clarion Electronics Co., Ltd. Clarion Corporation of America Contact Person Makoto Okubo Sattar Niyaz Signature

Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: July 15, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: AX2P2601 [Faurecia Clarion Electronics Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Makoto Okubo Title: Lead Engineer Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Email: [email protected]

Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: July 15, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: AX2P2601 [Faurecia Clarion Electronics Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Makoto Okubo Title: Lead Engineer Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Email: [email protected]

Attestation of Compliance with FCC Covered List software Requirements Date: July 15, 2026 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA FCC ID: AX2P2601 Product Name: Car Audio To whom it may concern This letter serves as an attestation that the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, or affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List.”, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Signature: Printed Name: Makoto Okubo Title: Lead Engineer Company: Faurecia Clarion Electronics Co., Ltd. Address: 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Tel.: +81-48-601-3700 Pursuant to KDB 986446 D01 Covered Equipment Guidance the evaluation of the product above shows compliance for the following reasons: Evaluation regarding the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance The chipset(s) used are not capable of running cybersecurity and/or anti-virus software. Compliance The memory configuration does not allow the execution of cybersecurity and/or anti-virus software. Compliance The storage capacity does not allow the running of cybersecurity and/or anti-virus software. Compliance The operating system used is not capable of running cybersecurity and/or anti-virus software. Compliance Device is not Inherent compliance Evaluation based on software bill of material. Evaluation based on scan for running software on the device. Evaluation based on filesystem scan for cybersecurity and/or anti-virus software. Evaluation based on running software check. The equipment for which authorization is sought complies with the applicable rules and fulfills the requirements specified in the above-mentioned KDB.

FCC Letter of Agency Date: July 15, 2026 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046-1609 To Whom It May Concern: I, an officer of Faurecia Clarion Electronics Co., Ltd., do hereby authorize, until further notice, Hidetoshi Sasaki of TÜV Rheinland Japan Ltd., Shin Yokohama Daini Center Bldg. 1F, 3-19-5, Shin Yokohama, Kohoku-ku, Yokohama 222-0033, Japan to act on our behalf in dealings before the Federal Communications Commission with respect to all matters relating to equipment authorizations under 47CFR. This authorization includes, but is not limited to, signing of Form 731. I certify that no party (as defined in 47 CFR 1:2002) to this application, including myself, is subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Agency Agreement Expiration Date: July 14, 2027 Sincerely, Signature: Name: Makoto Okubo Title: Lead Engineer On behalf of: Faurecia Clarion Electronics Co., Ltd. 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Telephone: +81-48-601-3700

MS-0044715 Page 1 of 1 Revision 1 5acXjzUk Date: July 15, 2026 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: AX2P2601 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photos Short Term Permanent Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup Photos Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual Short Term Permanent Parts List Faurecia Clarion Electronics Co., Ltd. (Applicant)has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: _ _____________________________/ Lead Engineer__ _____Makoto Okubo_____ (Signature/Title) (Print name) Tel: +81-48-601-3700 Email: [email protected]

Product label for FCC Product lab el for ISED Label pasting locati on Top View Unit of length [mm] Label Material: White p rint-treated polyeste r Label Adhesive: S-333 (acrylic adhesive) ¥¥ 70 95 ① SETPLATE 70 2.1 95 67.7 Product label 70 95

FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte RF Exposure Statement: JP26G23K 001 Page 1 of 3 Seite 1 von 3 Client: Faurecia Clarion Electronics Co., Ltd. 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Test item: Car Audio Identification: P2601 FCC Requirement According to FCC §2.1091, Mobile Devices must comply with the following applicable limit for maximum permissible exposure (MPE) specified in FCC §1.1310 (e)(1), Table 1: Equipment Use Frequency Range Power Density Limit Average Time General Population / Uncontrolled Exposure 1,500 – 100,000 [MHz] 1.0 [mW/cm 2 ] <30 [min] ISED Requirement According to RSS-102 (Issue 6), clause 6.6, no routine RF Exposure Evaluation is required if the transmitter has a minimum separation distance to the user greater than 20cm and has an output power (e.i.r.p.) below the following threshold: Transmitter Frequency Range Transmitter Operating Frequency Range RF Exp. Evaluation Threshold 300MHz – 6GHz Classic Bluetooth (DSS) 2400 – 2483.5 [MHz] 2.675 [W] Wireless LAN (DTS) Wireless LAN (NII) 5150 – 5850 [MHz] 4.507 [W] Note: RF Exposure Evaluation Threshold mentioned above is calculated according to the following formula: RF Exposure Evaluation Threshold = 1.31 x 10 -2 f 0.6834 [W] Frequency f is used as the lowest frequency in each Operating Frequency Range as the worst case. TÜV Rheinland Japan Ltd. – Global Technology Assessment Center 4-25-2 Kita-Yamata, Tsuzuki-ku, Yokohama 224-0021, Japan FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte RF Exposure Statement: JP26G23K 001 Page 2 of 3 Seite 2 von 3 Measurement Result The maximum measured transmitter power is given in the following table: Equipment Class Transmitter Conducted Output Power Pout Maximum Antenna Gain [dBi] e.i.r.p. Output Power [mW] Distance [cm] Power Density at 20cm [mW/cm 2 ] [dBm] [mW] DSS Bluetooth 0.87 0.0012 -1.83 0.8017 20 0.000159 DTS Wireless LAN 20.85 0.1216 -1.93 77.9830 20 0.015514 NII Wireless LAN 7.33 0.0054 -1.36 3.9537 20 0.000787 Note: (*) Peak conducted output power was applied instead of average power. Gray shading data shows each highest Power Density on each radio. The power density S in mW/cm 2 is calculated according to the formula: - S = (Pout · G) / (4π · D2), where - Pout = antenna conducted output power in mW, G = antenna gain in linear scale - D = distance between observation point and radiating structure in cm (here: 20cm). Simultaneous Operation As per the specification of the EUT, the following simultaneous cases are expected: Case Equipment Class Transmitter e.i.r.p. Output Power [mW] Sum of e.i.r.p. Output Power [mW] Power Density at 20cm [mW/cm2] Sum of Power Density [mW/cm2] Case 1 DSS Bluetooth 0.8017 0.8017 0.000159 0.000159 Case 2 DTS Wireless LAN 77.9830 77.9830 0.015514 0.015514 Case 3 NII Wireless LAN 3.9537 3.9537 0.000787 0.000787 Case 4 DSS Bluetooth 0.8017 78.7847 0.000159 0.015674 DTS Wireless LAN 77.9830 0.015514 Case 5 DSS Bluetooth 0.8017 4.7553 0.000159 0.000946 NII Wireless LAN 3.9537 0.000787 Gray shading data shows the highest simultaneous operation case on the device, for details refer to the submitted operational description from the applicant. Each MPE ratio for FCC and for ISED is calculated at the worst case operation at the next page. TÜV Rheinland Japan Ltd. – Global Technology Assessment Center 4-25-2 Kita-Yamata, Tsuzuki-ku, Yokohama 224-0021, Japan FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte RF Exposure Statement: JP26G23K 001 Page 3 of 3 Seite 3 von 3 Evaluation for Simultaneous Transmissions For FCC Equipment Class Transmitter The worst Power Density at 20cm [mW/cm 2 ] Power Density Limit [mW/cm 2 ] Power Density: MPE Ratio to FCC Limit Sum of Ratio of Power Density against Limit Limit for Ratio DSS Bluetooth 0.000159 1 0.000159 0.015674 <1 DTS Wireless LAN 0.015514 1 0.015514 For ISED Equipment Class Transmitter The worst e.i.r.p. Output Power [mW] RF Exp. Evaluation Threshold [W] EIRP: MPE Ratio to ISED Limit Sum of ratio of e.i.r.p. Output Power against Threshold Limit for Ratio DSS Bluetooth 0.8017 2.675 0.000300 0.029452 <1 DTS Wireless LAN 77.9830 2.675 0.029153 Conclusion This transmitter is classified as Mobile Devices by the client. The device complies with the FCC and ISED RF Exposure requirements, since the maximum transmitter power density is below the FCC limit. And the e.i.r.p. output power is below the ISED RF exposure evaluation exemption threshold. In additions, MPE ratios were calculated according to the KDB 447498 D01 (v06) and were less than 1. Refer to the summited test reports JP26DH30 001 (DSS) JP26TKQ6 001 (DTS) and JP26BN8I 001 (NII) for more details of measurement data. Hence, the device can be qualified as exemption from Routine Environmental Evaluation. RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. TÜV Rheinland Japan Ltd. – Global Technology Assessment Center 4-25-2 Kita-Yamata, Tsuzuki-ku, Yokohama 224-0021, Japan

Antenna Description_P2601Confidential Antenna Type:Film Antenna Antenna Manufacturer:Sunnyway Technology (China) Co., Ltd. 1st Floor, Building 4, No.99, Lane 215, Gaoguang Road, Qingpu District, Shanghai Part Number:ELH000Q00 (Bluetooth) ELH000R00 (WLAN Dualband 2.4GHz/5GHz) Antenna location: Simulation result: 1. Simulated VSWR 2. Simulated antenna gain Simulated VSWR of BTSimulated VSWR of Dual WLAN Simulated VSWR of Bluetooth and Dual WLAN Simulated Antenna gain of BTSimulated Antenna gain of Dual WLAN WLAN Dualband Antenna Bluetooth Antenna 3. Radiation patterns - 2.4 GHz band for BT antenna φ 0 degφ 90 degθ 90 deg θ 90 deg - 2.4 GHz band for WLAN antenna φ 0 degφ 90 degθ 90 deg - 5 GHz band for WLAN antenna φ 0 degφ 90 degθ 90 deg

FCC ID: AX2P2601 IC: 419C-P2601 Test Report Products Prüfbericht - Produkte TÜV Rheinland Japan Ltd. Global Technology Assessment Center4-25-2 Kita-YamataTsuzuki-kuYokohama 224-0021Japan Tel.: +81 45 914 3888 Mail: [email protected]: www.tuv.com Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Order No.: Auftrags-Nr.: 150328345 Page 1 of 97 Seite 1 von 97 Client Reference No.: Kunden-Referenz-Nr.: N/A Order Date: Auftragsdatum: 2026-03-25 Client: Auftraggeber: Faurecia Clarion Electronics Co., Ltd. 7-2 Shintoshin, Chuo-ku, Saitama-shi, Saitama 330-0081 Japan Test Item: Prüfgegenstand: Car Audio Identification / Type No.: Bezeichnung / Typ-Nr.: P2601 Serial No.: Serien-Nr.: See Section 4.3 Order Content: Auftrags-Inhalt: Wireless Testing Test Specification: Prüfgrundlage: FCC 47 CFR Part 15, Subpart C, Section 15.247 RSS-247 (Issue 4): 2025 Date of Sample Receipt: Wareneingangsdatum: 2026-06-11 -/- Test Sample No.: Prüfmuster-Nr.: A004305038-001 to 009, A004318673-001 Testing Period: Prüfzeitraum: 2026-06-19 to 2026-07-02 Place of Testing: Ort der Prüfung: Yokohama EMC Laboratory Testing Laboratory: Prüflaboratorium: TÜV Rheinland Japan Ltd. Test Result*: Prüfergebnis*: Pass compiled by: zusammengestellt von: Date: 2026-08-17 Datum:Hidetoshi Sasaki Position /Stellung:Project Engineer authorized by: genehmigt von: Issue Date: 2026-08-17 Ausstellungsdatum:Daisuke Watanuki Position / Stellung:Authorizer Other/Sonstiges: This test report covers DSS (FHSS) transmitter portions of the EUT for the application. Condition of the test item at delivery: Zustand des Prüfgegenstandes bei Anlieferung: Test item complete and undamaged Prüfmuster vollständig und unbeschädigt * Legend:P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s)N/A = not applicableN/T = not tested * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 2 of 97 Seite 2 von 97 Revisions Report No. Issue date Changes / Remarks JP26DH30 001 2026-08-17 Original document Remarks 1 The equipment used during the specified testing period was calibrated according to the test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of the laboratory’s management system. 2 Unless otherwise specified by the applied standard(s), the decision rule used in this test report for statements of conformity based on numerical measurement results is the “Zero Guard Band”/“Simple Acceptance” rule in accordance with ILAC G8:2019 and IEC Guide 115:2021. When the “Zero Guard Band” rule is applied, measurement uncertainty is not taken in account. For additional information on the risk resulting from the application of the “Zero Guard Band” decision rule, refer to ILAC G8:2019. FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 3 of 97 Seite 3 von 97 Contents 1. General Remarks ............................................................................................... 5 1.1 Test Specifications ......................................................................................................................... 5 1.2 Test Report Purpose ...................................................................................................................... 6 1.3 Complementary Materials ............................................................................................................... 6 2. Test Sites ........................................................................................................... 7 2.1 Test Facilities.................................................................................................................................. 7 2.2 List of Test and Measurement Instruments .................................................................................... 7 2.3 Measurement Uncertainty............................................................................................................... 9 3. General Product Information .......................................................................... 10 3.1 Product Function and Intended Use ............................................................................................. 10 3.2 Ratings and System Details.......................................................................................................... 10 3.3 Noise Generating and Noise Suppressing Parts .......................................................................... 11 3.4 Submitted Documents and Information ........................................................................................ 11 4. Test Setup and Operation Modes ................................................................... 12 4.1 Principle of Test Configuration Selection ...................................................................................... 12 4.2 Operation Modes .......................................................................................................................... 12 4.3 Physical Configuration for Testing ................................................................................................ 13 4.4 Test Software .....................................................................…

Text truncated - open the document above for the full version.

FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 60 of 97 Seite 60 von 97 5.10 Conducted Spurious Emissions RESULT: Pass Date of testing: 2026-06-29 Ambient temperature: 23C Relative humidity: 59% Atmospheric pressure: 1009hPa Requirements: FCC §15.247(d) and RSS-247 §6.6 In any 100kHz bandwidth outside the frequency band in which the intentional radiator is operating, the RF power shall be at least 20dBc (Peak) below that of the maximum in- band 100kHz emission. Test procedure: ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024 §6.7, §6.10 and KDB 558074 D01. The conducted spurious emissions were measured at the antenna port with a spectrum analyzer using a peak detector. The RBW was set to 100kHz and the VBW was set to 300kHz. Measurements were performed from 30MHz to 25GHz (10 th harmonics). The readings of the measurements take into account the loss generated by all the involved cables. Authorized-band band-edge measurements (relative method) were performed by conducted, as per §6.10.4 of ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024. FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 61 of 97 Seite 61 von 97 Figure 47: Conducted Spurious Emissions, 30MHz - 25GHz, DH5, Mode A (2402MHz) Figure 48: Conducted Spurious Emissions, 30MHz - 25GHz, DH5, Mode B (2441MHz) FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 62 of 97 Seite 62 von 97 Figure 49: Conducted Spurious Emissions, 30MHz - 25GHz, DH5, Mode C (2480MHz) Figure 50: Authorized-band band-edge, DH5, Mode A, Hopping Disable (2402MHz) FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 63 of 97 Seite 63 von 97 Figure 51: Authorized-band Band-edge, DH5, Mode C, Hopping Disable (2480MHz) Figure 52: Authorized-band Band-edge, DH5, Mode H, Hopping Enable FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 64 of 97 Seite 64 von 97 Figure 53: Authorized-band Band-edge, DH5, Mode H, Hopping Enable FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 65 of 97 Seite 65 von 97 Figure 54: Conducted Spurious Emissions, 30MHz - 25GHz, 3DH1, Mode A (2402MHz) Figure 55: Conducted Spurious Emissions, 30MHz - 25GHz, 3DH1, Mode B (2441MHz) FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 66 of 97 Seite 66 von 97 Figure 56: Conducted Spurious Emissions, 30MHz - 25GHz, 3DH1, Mode C (2480MHz) Figure 57: Authorized-band band-edge, 3DH1, Mode A, Hopping Disable (2402MHz) FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 67 of 97 Seite 67 von 97 Figure 58: Authorized-band Band-edge, 3DH1, Mode C, Hopping Disable (2480MHz) Figure 59: Authorized-band Band-edge, 3DH1, Mode H, Hopping Enable FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 68 of 97 Seite 68 von 97 Figure 60: Authorized-band Band-edge, 3DH1, Mode H, Hopping Enable FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 69 of 97 Seite 69 von 97 5.11 Radiated Spurious Emissions of Transmitter RESULT: Pass Date of testing: 2026-06-22, 2026-06-23, 2026-06-26 Ambient temperature: 23, 24, 23C Relative humidity: 54, 54, 55% Atmospheric pressure: 1015, 1007, 1006hPa Frequency range: 9kHz - 25GHz Measurement distance: 3m Kind of test site: Semi Anechoic Chamber Requirements: FCC §15.205, §15.209, §15.247(d) and RSS-247 §6.6, RSS-Gen §8.9, §8.10. Radiated emissions which fall in the restricted bands, as defined in FCC §15.205(a) must comply with the radiated emission limits specified in FCC §15.209(a). Radiated emissions which fall outside the operation frequency band and outside restricted bands shall either meet the limit specified in FCC §15.209(a) or be attenuated at least 20dB below the power level in the 100kHz bandwidth within the band that contains the highest level of the desired power (the less severe limit applies). Test procedure: ANSI C63.10-2020+Cor.1-2023+C63.10a-2024+Errata to C63.10a-2024 §6.3, §6.4, §6.5, §6.6, §6.10 and KDB 558074 D01 The EUT was placed on a nonconductive turntable. The table height was 80cm for measurements below 1GHz and 1.5m for measurements above 1GHz. Before final measurements of radiated emissions were performed, the EUT was scanned to determine its emission spectrum profile. The physical arrangement of the test system, the associated cabling were varied in order to ensure that maximum emission amplitudes were attained. The spectrum was examined from 9kHz to the 10th harmonic of the highest fundamental transmitter frequency (25GHz). Final radiated emission measurements were made at 3m distance. At each frequency where a spurious emission was found, the EUT was rotated 360° in order to determine the emission’s maximum level. For frequencies above 30MHz, the antenna was raised and lowered from 1 to 4m and measurements were taken using both horizontal and vertical antenna polarizations. For emissions between 30MHz and 1GHz, measurements were performed with a test receiver operating in the CISPR quasi-peak detection mode with a 6dB bandwidth set to 120kHz. FCC ID: AX2P2601 IC: 419C-P2601 Test Report – Products Prüfbericht - Produkte Test Report No.: Prüfbericht-Nr.: JP26DH30 001 Page 70 of 97 Seite 70 von 97 For emissions above 1GHz, measurements were performed with a spectrum analyzer using the following settings: for peak field strength: RBW = 1MHz & VBW = …

Text truncated - open the document above for the full version.