AYBHAEBT5Bluetooth Headphone

Wearing the headphones 1 Be sure to use correct ear piece for left and right ear. 2 The medium-size silicone ear pieces are attached when purchased. You may not enjoy the bass sound fully if the ear pieces do not fit your ears. To enjoy better sound while reducing sound leakage, choose the other pair of ear pieces (three sizes of silicone ear pieces) and adjust their positions to fit them to your ears. 3 When wearing the headphones, adjust the position of the supports so that they fit your ears. • If the headphones do not fit your ears, remove them, rotate the supports, and then put the headphones back on again. Support ■About the ear pieces Two types of ear piece are provided: standard type ear pieces, and open type ear pieces that make it easier to hear external sounds. Use the most suitable ear pieces for your listening environment. Standard type ear pieces Open type ear pieces CAUTION • Although the open type ear pieces are designed so that external sounds can be heard well, make sure that you pay sufficient attention to your surroundings while using them. • Do not turn up the volume so high that you cannot hear sound around you. For replacing the ear pieces... • Attach the ear pieces firmly when replacing them; failure to do so may result in the ear pieces getting lodged in your ear canal when removed, thus becoming a possible health hazard. Notes on use • The ear pieces deteriorate with age even in normal use and maintenance. • When the ear pieces get dirty, detach the ear pieces and wash them in water-diluted detergent. After washing, dry the ear pieces and attach to the headphones. • When using the open type ear pieces, bass sounds will be weaker than when using the standard type. • If the headphones themselves have become dirty, wipe them with a damp cloth. Using the headphones Remote controllerHeadphone (right side) 1 Volume +/– buttons 2 MFB (Multi function button) 3 USB terminal (DC IN) 4 LED 5 Microphone Examples of LED indication (z: red {: blue) OperationIndication BLUETOOTH device connection standby • • • • • • • • • • • • • • • • • • • • • • • • Pairing standbyz{z{z{z{z{z{z{z{z{z{z{z{z{z{ BLUETOOTH device connecting • • • • • • • • • • • • • • • • • • • • • • • • • When the remaining battery charge is low, the LED indicator lights only in red. ■Charging the System Using the supplied USB cable, connect the System and a commercially available USB conversion adapter or a computer while the computer is on. The LED lights up in red, and charging starts. When charging is complete, the indicator goes out. The charging time is approx. 2.5 hours. • Use only the supplied USB cable to charge the System. • Operation is not possible while charging. HA-EBT5 -J © 2015 JVC KENWOOD Corporation Printed in China SAMPLE WIRELESS HEADPHONES CASQUE SANS FIL AURICULARES INALÁMBRICOS INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES ■Turning on the System Press and hold MFB for about 3 seconds. The LED flashes blue once, and the System turns on. ■Turning off the System Press and hold MFB for about 3 seconds. The LED flashes red once, and the System turns off. Auto Power Save If no BLUETOOTH device is connected for about 5 minutes, the System automatically turns itself off. ■Connecting a BLUETOOTH device to the System 1 Turn the System off. 2 Press and hold MFB for 7 seconds or more. The System goes into pairing standby mode and the LED flashes alternately in blue and red. 3 Turn on the BLUETOOTH device and enable pairing. 4 Select “EBT5” from the list of devices. • During the pairing process, the other device may require input of a PIN code. In such a case, enter “0000” as the PIN code for the System. 5 Verify that the LED on the System flashes blue. Pairing is now complete. Automatic connection The System automatically attempts to reconnect to the BLUETOOTH device used the previous time. ■Operating the remote control (example for iPhone) For audio operation To play or pause a trackPress MFB once To skip to the next trackPress Volume + button twice quickly To skip to the previous track or beginning of the current track Press Volume – button twice quickly To adjust the volumePress Volume +/– buttons For phone operation To answer or end a callPress MFB once To reject a callPress and hold MFB for about 1 second while a call is incoming* 1 To switch to mobile phonePress and hold MFB for about 1 second during a call* 1 To use voice dialingPress and hold MFB for about 1 second while not using the phone* 1 * 1 A beep will sound when MFB has been held for 1 second. • This unit can not guarantee operation of all of the remote control functions. Specifications Audio Frequency response20 Hz - 20 000 Hz BLUETOOTH StandardBluetooth v3.0 Class 2 Max. communication distanceApprox. 10 m (33 ft) Supported BLUETOOTH profilesHSP/HFP/A2DP/AVRCP Supported codecsSBC Power supply/General Power supplyInternal rechargeable lithium battery Battery lifeApprox. 4.5 hrs (Depends on usage conditions.) Charging timeApprox. 2.5 hrs Usage temperature range5 °C (41 °F) to 40 °C (104 °F) Mass15 g (0.53 oz) (including internal rechargeable battery) AccessoriesUSB cable (only for recharging)/Standard type ear pieces/ Open type ear pieces Water resistance ratingIPX4 Designs and specifications are subject to change without notice. For Customer Use: Enter the Model No. and Serial No. (on the product) below. Retain this information for future reference. Model No. Serial No. English WARNING Hearing Comfort and Well-Being • Do not play your personal audio at a high volume. Hearing experts advise against continuous extended play. • If you experience a ringing in your ears, reduce volume or discontinue use. Traffic Safety • Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas. • You should use extreme caution or temporarily discontinue use in potentially hazardous situations. • Do not turn up the volume so high that you cannot hear sound around you. CAUTION To reduce the risk…

Text truncated - open the document above for the full version.

AIPO International Co., Ltd. Floor 5, Block A, No.8 East Zone, Shangxue Technology Industrial Park, Bantian, Longgang District, Shenzhen, Guangdong, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD Attention: Reviewing Engineering Reference: Model #: FCC ID: HA-EBT5 AYBHAEBT5 Description of USB port Dear Sir/Madam: The BM8615 of MCU at pins 39 and 40 connect to Mini USB port, USB port is only used for manufacturer software upgrade, for the end-user, only to used for charging the internal battery or operational electrical power, there is no function of information transmission to connect computer peripheral device. Sincerely, AIPO International Co., Ltd. Signature: Ariel Huang / Manager Typed name and Title

Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 17 Photographs - Constructional Details 17.1 Model HA-EBT5 - External View Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn

FCC/IC Label Location for model: HA-EBT5 The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Model: HA-EBT5 FCC ID: AYBHAEBT5 IC: 20458-HAEBT5

FCC/IC Label Location for model: HA-EBT5 The Label must not be a stick-on paper. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Model: HA-EBT5 FCC ID: AYBHAEBT5 IC: 20458-HAEBT5

Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 17.2 Model HA-EBT5- Internal View Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn ANT Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn

TEST REPORT Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page 1 of 64 Reference No. .................... : WTD15S0628960E FCC ID ................................ : AYBHAEBT5 Applicant ............................ : AIPO International Co., Ltd. Address .............................. : Floor 5, Block A, No.8 East Zone, Shangxue Technology Industrial Park, Bantian, Longgang District, Shenzhen, Guangdong, China Manufacturer .................... : The same as above Address .............................. : The same as above Product Name .................... : Bluetooth Headphone Model No. ........................... : HA-EBT5 Standards........................... : FCC CFR47 Part 15 Section 15.247:2014 Date of Receipt sample .... : Jun.27, 2015 Date of Test ....................... : Jun.28, 2015 ~ Jul.11, 2015 Date of Issue ...................... : Jul.13, 2015 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTD15S0628960E Page 2 of 64 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Test Summary Test Items Test Requirement Result Radiated Spurious Emissions 15.205(a) 15.209 15.247(d) PASS Band edge 15.247(d) 15.205(a) PASS Conduct Emission 15.207 PASS 20dB Bandwidth 15.247(a)(1) PASS Maximum Peak Output Power 15.247(b)(1) PASS Frequency Separation 15.247(a)(1) PASS Number of Hopping Frequency 15.247(a)(1)(iii) PASS Dwell time 15.247(a)(1)(iii) PASS Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307(b)(1) PASS Reference No.: WTD15S0628960E Page 3 of 64 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 Contents Page 1 COVER PAGE ...................................................................................................................................... 1 2 TEST SUMMARY ............................................................................................................................................. 2 3 CONTENTS ....................................................................................................................................................... 3 4 GENERAL INFORMATION ............................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T. .......................................................................................................... 5 4.2 DETAILS OF E.U.T. .................................................................................................................................... 5 4.3 CHANNEL LIST ............................................................................................................................................ 5 4.4 TEST MODE ................................................................................................................................................ 6 4.5 TEST FACILITY ............................................................................................................................................ 6 5 EQUIPMENT USED DURING TEST ............................................................................................................. 7 5.1 EQUIPMENTS LIST ...................................................................................................................................... 7 5.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................ 8 5.3 MEASUREMENT UNCERTAINTY .................................................................................................................. 8 5.4 TEST EQUIPMENT CALIBRATION ................................................................................................................ 8 6 CONDUCTED EMISSION ............................................................................................................................... 9 6.1 E.U.T. OPERATION .................................................................................................................................... 9 6.2 EUT SETUP ................................................................................................................................................ 9 6.3 MEASUREMENT DESCRIPTION ................................................................................................................... 9 6.4 CONDUCTED EMISSION TEST RESULT .................................................................................................... 10 7 RADIATED SPURIOUS EMISSIONS .......................................................................................................... 12 7.1 EUT OPERATION ...................................................................................................................................... 12 7.2 TEST SETUP ............................................................................................................................................. 13 7.3 SPECTRUM ANALYZER SETUP ................................................................................................................. 14 7.4 TEST PROCEDURE ................................................................................................................................... 15 7.5 SUMMARY OF TEST RESULTS .................................................................................................................. 16 8 BAND EDGE MEAS…

Text truncated - open the document above for the full version.

Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 16 Photographs – Model HA-EBT5 Test Setup 16.1 Photograph – Conducted Emission Test Setup at Test Site 1# 16.2 Photograph – Radiation Spurious Emission Test Setup Below 30MHz at Test Site 2# Reference No.: WTD15S0628960E Waltek Services (Shenzhen) Co.,Ltd. http://www.w altek.com.cn 30M Hz-1GHz at Test Site 2# Above 1GHz at Test Site 1#