AZ489FT4858MULTIBAND PORTABLE 2-WAY RADIO

APX™ Two-Way Radios APX 6000User GuideModel 3 English mASTRO ® APX™ 6000 Series Digital Portable RadiosQuick Reference Card Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. Radio Controls Radio On/OffZones and Channels Receiving and TransmittingSending an Emergency Alarm To exit emergency at any time, press and hold the Emergency button. Sending an Emergency Call Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. !  Top (Orange) Button__________ 2-Position Concentric Switch__________ Main Display Keypad Menu Select Buttons 3-Position A/B/C Switch __________ 4-Way Navigation Button Accessory Connector Home Button Microphone Data Feature Button • On – On/Off/Volume knob clockwise. • Off – On/Off/Volume knob counterclockwise. • Zone – Zone switch to desired zone. • Channel – Channel switch to desired channel. Battery Side Button 1__________Side Button 2__________ PTT Button On/Off/Volume Control Knob 16-Position Select Knob __________ Top Side (Select) Button__________ Main Speaker Microphone Antenna Bluetooth Pairing Indicator Top Display 1 Select zone/channel. 2 Listen for a transmission.ORPress and hold Volume Set button. ORPress Monitor button and listen for activity. 3 Adjust volume, if necessary. 4 Press the PTT button to transmit; release to receive. 1 Press the Emergency button. 2 The display shows Emergency and the current zone/channel. A short, medium-pitched tone sounds, and the LED rapidly blinks red. 3 When acknowledgment is received, you hear four beeps; alarm ends; and radio exits emergency. 1 Press the Emergency button. *PMLN5717A* PMLN5717A © 2010 by Motorola, Inc. All Rights Reserved. 12/101301 E. Algonquin Rd., Schaumburg,IL 60196-1078, U.S.A. English Menu Navigation < or > to Menu Entry. { , | , or } directly below Menu Entry to select. H to exit. U or D to scroll through sub-list. { , | , or } directly below Menu Entry to select. To exit emergency at any time, press and hold the Emergency button. Sending a Silent Emergency Call To exit emergency at any time, press and hold the Emergency button. Display Status Icons 2 Press and hold the PTT button. Speak clearly into the microphone. 3 Release the PTT button to end call. 4 Press and hold Emergency button to exit emergency. 1 Press the Emergency button. 2 The display does not change; the LED does not light up, and there is no tone. 3 Silent emergency continues until you:Press and hold the Emergency button to exit emergency state.ORPress and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. Receiving a call or dataTransmitting a call or dataReceived an Individual Call.Blinks when the battery is low. u t F 8 The more stripes, the stronger the signal strength for the current site (trunking only).Direct radio to radio communication or connected through a repeater.On = Direct Off = Repeater This channel is being monitored.L = Radio is set at Low power. H = Radio is set at High power. Scanning a scan list.Blinking dot = Detects activity on the Priority-One Channel during scan. Steady dot = Detects activity on the Priority-Two Channel during scan. The vote scan feature is enabled. v O M H OR . i j k On steady = View mode Blinking = Program mode On = Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = AES Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call.On = Location feature enabled, and location signal available. Off = Location feature disabled. Blinking = Location feature enabled, but location signal unavailable.On = User is currently associated with the radio. Off = User is currently not associated with the radio. Blinking = Device registration or user registration with the server failed due to an invalid username or pin.Data activity is present.Bluetooth is ready.Bluetooth is connected to the device. m l G no b a Declaration of Conformity English i Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola, Inc.Address: 1301 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.Phone Number: 1-800-927-2744Hereby declares that the product: Model Name: APX 6000 conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity English ii Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct …

Text truncated - open the document above for the full version.

FCC ID: AZ489FT4858 ______________________________________________________________________________ 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. 31 st August 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification. Gentlemen: The APX6000 Portable 2-Way radio was designed to operate in the frequency bands 450-520 MHz. To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Motorola is requesting that the FCC lists the frequencies 450-520 MHz under FCC Rule Parts 90 on the FCC Grant For the FCC’s Rule Parts 90 applications, this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services, etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personnel. Also, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCC-OET KDB Publication 634817 guidance, the grantee acknowledges that a device operating on unauthorized frequencies is a violation of the FCC Rules. Frequency Range (MHz) Part 90 Feds 450-454 454-456* x 467.7375-470 470-512 X x x 512-520 x *Canada Sincerely, Mike Ramnath (signed above) Mike Ramnath Manager, Regulatory Compliance Email: [email protected] Exhibit 13c

FCC ID: AZ489FT4858 ______________________________________________________________________________ Motorola Solutions, Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 Date: 26 th August 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT4858. Dear Sir or Madam: Motorola Solutions Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein submits application for Certification of the subject transmitter. This transmitter is intended for use in a Portable Radio environment with capabilities for clear and coded communications with a variable transmit power operating within the following frequency ranges: 450 – 520 MHz: 1.0 – 5.6 Watts (30 – 37.48 dBm) The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete application for certification is enclosed. Please contact Mike Ramnath at (954) 723-5793 if you require any additional information. Sincerely, Mike Ramnath (signed above) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13

FCC ID: AZ489FT4858 ______________________________________________________________________________ Motorola Solutions, Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. CONFIDENTIALITY REQUESTED 26 th August 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT4858. Dear Sir or Madam: Motorola Solutions Inc (Motorola) is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Sections 0.457(d), 0.459 and 552(b)(4) of the Freedom of Information Act. This information is only for internal Motorola use and the use of dealers and service providers that have entered into confidential business agreements with Motorola. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, Mike Ramnath (signed above) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13B

Applicant: Motorola Solutions FCC ID: AZ489FT4858 External Photographs The following photographs are attached. Exhibit 1. Front view with battery. 3A 2. Back view with battery. 3B 3. Front view with FCC Labels. 3C 4. Side view (Right). 3D 5. Side view (Left). 3E 6. Top view (Controls). 3F EXHIBIT 3 Applicant: Motorola Solutions FCC ID: AZ489FT4858 FRONT VIEW WITH BATTERY EXHIBIT 3A Applicant: Motorola Solutions FCC ID: AZ489FT4858 BACK VIEW WITH BATTERY EXHIBIT 3B Applicant: Motorola Solutions FCC ID: AZ489FT4858 FRONT VIEW WITH FCC LABELS EXHIBIT 3C No Keypad/Display Limited Keypad Full Keypad/Display Applicant: Motorola Solutions FCC ID: AZ489FT4858 SIDE VIEW (RIGHT) EXHIBIT 3D Applicant: Motorola Solutions FCC ID: AZ489FT4858 SIDE VIEW (LEFT) EXHIBIT 3E Applicant: Motorola Solutions FCC ID: AZ489FT4858 TOP VIEW EXHIBIT 3F

Applicant: Motorola Solutions FCC ID: AZ489FT4858 Identification Label LOCATION See the Attached Photograph or Sketch X Back of Radio Back of Radio under Belt Clip TYPE X The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/inch. MARKINGS (TEXT) X See the attached photographs, and Exhibit 3C, for the actual location of the FCC label on the device. Label Attached Below. See Attached Drawing. APX6000 APX6000 APX6000 No Key pad/Display Limited Keypad Full Keypad/Display EXHIBIT 1A Applicant: Motorola Solutions FCC ID: AZ489FT4858 General Information I. Production Plans Quantity production is planned. II. Application References Reference is made to the following Motorola "Application References" 1. Portable Products and their application. 2. Portable Products Transmitter Modulations Methods. 3. Motorola EMC Laboratory-Plantation, Florida III. Data Submittal Procedure: Data is supplied in accordance with Part 2, Subpart J of the Commissions’ rules. IV. Applicable References: • Reference Certification FCC ID: AZ489FT4858 • RSS Gen, RSS102, RSS 119, RSS 210. • EIA/TIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards • CFR 47, Rule Part 2, 15, and 90 EXHIBIT 1B

Applicant: Motorola Solutions FCC ID: AZ489FT4858 Internal Photographs The following photographs are attached. Exhibit 1. RF board with Shields (Top). 9A 2. RF board without Shields (Top). 9B 3. RF board with Shields (Bottom). 9C 4. RF board without Shields (Bottom). 9D 5. Vocon board with Shields (Top). 9E 6. Vocon board without Shields (Top). 9F 7. Vocon board with Shields (Bottom). 9G 8. Vocon board without Shields (Bottom). 9H 9. Expander board with Shields (Top). 9I 10. Expander board without Shields (Top). 9J 11. Expander board without Shields (Bottom). 9K EXHIBIT 9 Applicant: Motorola Solutions FCC ID: AZ489FT4858 RF board with Shields (Top) EXHIBIT 9A Applicant: Motorola Solutions FCC ID: AZ489FT4858 RF board without Shields (Top) EXHIBIT 9B Applicant: Motorola Solutions FCC ID: AZ489FT4858 RF board with Shields (Bottom) EXHIBIT 9C Applicant: Motorola Solutions FCC ID: AZ489FT4858 RF board without Shields (Bottom) EXHIBIT 9D Applicant: Motorola Solutions FCC ID: AZ489FT4858 Vocon board with Shields (Top) EXHIBIT 9E Applicant: Motorola Solutions FCC ID: AZ489FT4858 Vocon board without Shields (Top) EXHIBIT 9F Applicant: Motorola Solutions FCC ID: AZ489FT4858 Vocon board with shields (Bottom) EXHIBIT 9G Applicant: Motorola Solutions FCC ID: AZ489FT4858 Vocon board without shields (Bottom) EXHIBIT 9H Applicant: Motorola Solutions FCC ID: AZ489FT4858 Expander board with shields (Top) EXHIBIT 9I Applicant: Motorola Solutions FCC ID: AZ489FT4858 Expander board without shields (Top) EXHIBIT 9J Applicant: Motorola Solutions FCC ID: AZ489FT4858 Expander board without shields (Bottom) EXHIBIT 9K

EMS EME Form Responsibl Report Aut Date/s Test Manufactu Sector/Gro Date subm DUT Desc r Test TX m Max. Pow e Nominal Po Tx Frequen Signaling t Model(s) T Model(s) C Serial Num Classificati FCC ID: IC: The test resu over 1 gram p The test resu magnetic, an over 10gram s Based on the in supplied, said p shall not be rep I attest to the a with the sugge s evaluated. EM m-SAR-Rpt-Rev. 1 D EME Tes 8000 Wes Fort Lauder le Engineer: thor: ted: urer/Location: oup/Div.: itted for test: ription: ode(s): er output: ower: ncy Bands: ype: Tested: Certified: mber(s): ion: lts clearly de m per the require lts clearly dem d electromagne s of contiguou nformation and th product complies produced without ccuracy of the da sted guidelines of p.p. De MS EME Lab S Labor Approva 11.0 DECLARATIO st Laboratory st Sunrise Blvd rdale, FL. 3332 Kim Uong Kim Uong 6/24/2011- : Motorola, G&PS 6/21/2011 APX6000, Dual Displ TDMA tra n CW (PTT) 5.6 Watts 5.0 Watts 450 – 520 M FM and TD H98SDD9P H98SDD9P CAI110MC Occupation AZ489FT4 109U-89FT * Refer to monstrate comp ements of 47 CF monstrate comp etic fields (up t s tissue. he testing results p with the national t written approva ata and assume fu the TIA TSB-150 eanna Zakhar Senior Resour ratory Directo al Date: 8/3/2 ON OF COMP d 22. (Principal Staf (Principal Staf 7/25/2011 Reynosa/Sch a 450-520MHz, ay Models. Ca nsmission. MHz DMA PW5AN (NUE PW5AN (NUE CWF, CAI110M nal/Controlled 4858; Rule part T4858 section 15 of p pliance with FC FR 2.1093(d). pliance with ICN to 300 GHz), H provided herein, l and internationa al from an official ull responsibility f 0 December 2004 ria rce Manager, or 2011 PLIANCE SA Date of R Report R Report I ff Eng.) ff Eng.) aumburg , 1-5.6W, 6.25k apable of digita E1017), H98SD E1017), H98SD MCVW t 90 (450 - 512 part 1 for highe CC Occupation The 10 grams NIRP (1998) G Health Physics the undersigned al reference stand lly designated rep for the completen . The results and TE AR ASSESSME Report: 0 Revision: O ID: _ kHz/12.5 kHz al and analog F DH9PW7AN (N DH9PW7AN (N MHz) est SAR summ nal/Controlled R s result is not a Guidelines for 74, 494-522 R certifies that whe dards and guideli presentative of the ness of these meas d statements conta Certifica Certific a Page 1 of 6 ESTING CERT # ENT Part 1 of 08/03/2011 O SR9215_16 S _Rev.O_11080 /25 kHz , Basi FM transmissio NUE1021) NUE1021) mary results. RF Exposure li applicable to FC limiting expos RF Exposure lim en used as stated ines listed in secti e Motorola Soluti surements. This r ained in this repo ation Date: ation No.: SRID: 921 64 # 2518.01 f 2 SAR rpt_APX6 03 c Top Display on. Also capabl imits of 8 W/k CC filing. sure in time-var mits of 10 W/k in the operating i ion 3.0 of this rep ions EME Labor reporting format ort pertain only to 15/9216 6000 U2 and le of kg averaged rying electric, kg averaged instructions port. This report atory. is consistent o the device(s) SRID: 9215/9216 EMS EME Form-SAR-Rpt-Rev. 11.0 Page 2 of 64 Part 1 of 2 1.0 Introduction ........................................................................................................4 2.0 Abbreviations / Definitions ................................................................................4 3.0 Referenced Standards and Guidelines ...............................................................4 4.0 SAR Limits ........................................................................................................5 5.0 SAR Result Scaling Methodology .....................................................................6 6.0 Description of Device Under Test (DUT) .........................................................6 7.0 Optional Accessories and Test Criteria ..............................................................7 7.1 Antennas ...................................................................................................7 7.2 Batteries ....................................................................................................7 7.3 Body worn accessories ..............................................................................8 7.4 Audio accessories......................................................................................9 8.0 Description of Test System ..............................................................................11 8.1 Description of Robotics/Probes/Readout Electronics .............................11 8.2 Description of Phantom(s) ......................................................................12 8.2.1 Dual Flat Phantom ......................................................................12 8.2.2 SAM Phantom .............................................................................12 8.2.3 Elliptical Flat Phantom ...............................................................12 8.3 Description of Simulated Tissue .............................................................12 9.0 Additional Test Equipment ..............................................................................13 10.0 SAR Measurement System Verification ..........................................................14 10.1 Equivalent Tissue Test Results ...............................................................14 10.2 System Check Test Results .....................................................................16 11.0 Environmental Test Conditions .......................................................................16 12.0 DUT Test Methodology ...................................................................................17 12.1 Measurements .........................................................................................17 12.2 DUT Configuration(s) .............................................................................17 12.3 DUT Positioning Procedures ..................................................................17 12.3.1 Face .............................................................................................17 12.3.2 Body ...........…

Text truncated - open the document above for the full version.

EMS Re Re Da Ma Sec Da DU Te M a No Tx Sig Mo Mo Ser Cla FC IC The ove r The ma g over Based suppl shall I att e with eval u EME For-SAR-R E 8 Fo r esponsible Eng eport Author: ate/s Tested: anufacturer/L ctor/Group/D ate submitted f UT Description st TX mode(s) ax. Power outp ominal Power: x Frequency B gnaling type: odel(s) Tested odel(s) Certifi rial Number(s assification: CC ID: : test results cl e r 1 gram per th test results cle gnetic, and elec r 10grams of co d on the informat lied, said product not be reproduce est to the accurac the suggested gu i uated. p EMS EME L Ap Rpt-Rev. 11.0 DECLA EME Test Lab 000 West Sunr rt Lauderdale, F gineer: K i Ki 6/2 Location: M o iv.: G & for test: 6/ 2 n: A P Du TD ): C W put: 5. 6 : 5. 0 Bands: 4 5 FM : H 9 ied: H 9 s): C A Oc AZ 10 * early demonstra he requirements early demonstra ctromagnetic fi ontiguous tissu tion and the testin t complies with th ed without writte y of the data and idelines of the TIA p.p. Deanna Za Lab Senior R Laboratory D pproval Date: ARATION O boratory rise Blvd FL. 33322. im Uong (Princ im Uong (Princ 24/2011-7/25/2 otorola, Reyno &PS 21/2011 PX6000, 450-5 ual Display Mo DMA transmis W (PTT) 6 Watts 0 Watts 50 – 520 MHz M and TDMA 98SDD9PW5A 98SDD9PW5A AI110MCWF, ccupational/Co Z489FT4858; R 09U-89FT4858 Refer to secti o ate compliance s of 47 CFR 2. ate compliance elds (up to 300 ue. ng results provid he national and in en approval from assume full resp A TSB-150 Decem akharia Resource Mana irector 8/3/2011 F COMPLIAN cipal Staff Eng cipal Staff Eng 2011 osa/Schaumbu 520MHz, 1-5.6 odels. Capable sion. AN (NUE1017) AN (NUE1017) CAI110MCVW ontrolled Rule part 90 (4 on 15 of part 1 e with FCC Oc 1093(d). The e with ICNIRP 0 GHz), Health ed herein, the un nternational refer an officially desig onsibility for the mber 2004. The r ager, NCE SAR AS Date of Repo r Report Revisi Report ID: g.) g.) urg 6W, 6.25kHz/1 of digital and ), H98SDH9PW ), H98SDH9PW W 450 - 512 MHz for highest S A ccupational/Con 10 grams resul (1998) Guidel h Physics 74, 4 dersigned certifie rence standards a gnated represent completeness of t results and statem Certif Certi f TESTING SSESSMENT rt: 08/03/ ion: O SR9 2 _Rev. 2.5 kHz /25 kH analog FM tra W7AN (NUE1 W7AN (NUE1 z) AR summary re ntrolled RF Ex lt is not applica lines for limitin 94-522 RF Exp es that when used and guidelines list ative of the Moto these measureme ments contained i fication Date: fication No.: S Page 1 of 56 G CERT # 2518.0 Part 2 of 2 /2011 215_16 SAR rp .O_110803 Hz , Basic Top ansmission. Als 021) 021) esults. xposure limits o able to FCC fil ng exposure in posure limits o d as stated in the o ted in section 3.0 orola Solutions EM ents. This reportin n this report pert SRID: 9215/92 6 01 pt_APX6000 U p Display and so capable of of 8 W/kg aver ling. n time-varying of 10 W/kg ave operating instruc of this report. Th ME Laboratory. ng format is cons tain only to the de 216 U2 raged electric, eraged ctions his report istent evice(s) SRID: 9215/9216 EMS EME For-SAR-Rpt-Rev. 11.0 Page 2 of 56 APPENDIX D Test System Verification Scans The SAR result indicated on the Manufacture’s Calibrated certificates for dipole D450V3 S/N 1077 were not used due to the following: -- The IEEE 1528-2003 and the FCC OET-65 Supplement C, System Verification section indicated that “The measured 1-g SAR should be within 10% of the expected target values specified for the specific phantom and RF source used in the system verification measurement.” -- SPEAG calibration certificate indicates that the allowed tolerance for this dipole is higher than +/-10% (e.g. 4.73 +/-18.1% at k=2 for Head, and 4.47 +/-18.1% at k=2 for Body). -- The allowed tolerance for the probes is also higher than +/- 10% (e.g. 13.4% at k=2 at 450 MHz for the probe being used to assess this product). Due to probe, dipole and system tolerances noted above, the lab averages dipole results across multiple probes to establish a set of averaged targets for each dipole using the following procedure: • The System Validation was conducted per IEEE1528-2003 and IEC62209-2 Edition 1.0 2010-03 standards using the simulated head tissue and multiple probes that are available and applicable for the dipole under test to verify the System Validation. Results for this dipole are within the measurement system uncertainty of the reference SAR values indicated within IEC62209-2 Edition 1.0 2010-03 when using flat phantom with 2mm thickness is used. These results then are averaged and used as the target for the daily system performance check when the simulated head tissue is used. • The dipole targets for the body are set immediately following the same process noted above. Since there is no standard referencing the SAR values for the System Validation using the simulated body tissue, the compliant System Validation results using the simulated head tissue are used to justify the use of the System Validation results using the simulated body tissue due to the same setup except for the simulated tissue type. The targets set in this report were conducted following the above process. Note that the targets set for the tested dipole, when using the simulated head tissue, meets the requirement for the system validation per IEEE1528-2003, IEC62209-2 Edition 1.0 2010-03 standards, and the difference between this result and the result from the manufacture’s dipole calibration certificate is up to 6.6% for 450 dipole which is well within the measurement uncertainty of the measurement system at k=2. To assess the isotropic characteristics of the measurement probe, a probe rotation was performed using the "Rotation (1D)" function in the DASY software with a measured isotropy tolerance of +/- 0.5dB. SRID: 9215/9216 EMS EME For-SAR-Rpt-Rev. 11.0 Page 3 of 56 SRID: 9215/9216 EMS EME For-SAR-Rpt-Rev. 11.0 Page 4 of 56 SRID: 9215/9216 EMS EME For-SAR-Rpt-Rev. 11.0 Page 5 of 56 SRID: 9215/9216 EMS EME For-SAR-Rpt-Rev. 11.0 Page 6 of 56 SRID: 9215/9216 EMS EME For-SAR-…

Text truncated - open the document above for the full version.

Applicant: Motorola Solutions FCC ID: AZ489FT4858 Submitted Measured Data MEASUREMENT EXHIBIT NUMBER OF PAGES 1. RF Power Output Data 6A 1 2. Audio Frequency Response 6B 1 3. Audio Low Pass Filter Response 6C 1 4. Modulation Limiting 6D 1 5. Occupied Bandwidth 6E 4 6. Radiated Spurious Emissions 6F 2 7. Conducted Spurious Emissions 6G 2 8. Power Line Conducted Emissions 6H 3 9. Frequency Stability (Volt/Temp) 6I 1 10. Transient Frequency Behavior 6J 1 Note: Data was tested to show compliance to RSS102, RSS119, and RSS210. Applicant: Motorola Solutions FCC ID: AZ489FT4858 RF Power Output Data The RF power output was measured with the indicated voltage applied to and current into the final RF amplifying device. 450.025 MHz Measured RF output: 1.0 Watt Nominal DC voltage: 7.5 Volts Nominal DC Current: 960 mAmps Primary Supply Voltage: 7.5 Volts Measured RF output: 3.0 Watts Nominal DC voltage: 7.5 Volts Nominal DC Current: 1533 mAmps Primary Supply Voltage: 7.5 Volts Measured RF output: 5.6 Watts Nominal DC voltage: 7.5 Volts Nominal DC Current: 2120 mAmps Primary Supply Voltage: 7.5 Volts 484.975 MHz Measured RF output: 1.0 Watt Nominal DC voltage: 7.5 Volts Nominal DC Current: 880 mAmps Primary Supply Voltage: 7.5 Volts Measured RF output: 3.0 Watts Nominal DC voltage: 7.5 Volts Nominal DC Current: 1370 mAmps Primary Supply Voltage: 7.5 Volts Measured RF output: 5.6 Watts Nominal DC voltage: 7.5 Volts Nominal DC Current: 1910 mAmps Primary Supply Voltage: 7.5 Volts 519.975 MHz Measured RF output: 1.0 Watt Nominal DC voltage: 7.5 Volts Nominal DC Current: 932 mAmps Primary Supply Voltage: 7.5 Volts Measured RF output: 3.0 Watts Nominal DC voltage: 7.5 Volts Nominal DC Current: 1477 mAmps Primary Supply Voltage: 7.5 Volts Measured RF output: 5.6 Watts Nominal DC voltage: 7.5 Volts Nominal DC Current: 2069 mAmps Primary Supply Voltage: 7.5 Volts EXHIBIT 6A Applicant: Motorola Solutions FCC ID: AZ489FT4858 Audio Frequency Response (Freq: 484.975MHz, ChSp: 12.5 kHz) Exhibit 6B Applicant: Motorola Solutions FCC ID: AZ489FT4858 Audio Low Pass Filter Response Low Pass Filter Response -350.00 -330.00 -310.00 -290.00 -270.00 -250.00 -230.00 -210.00 -190.00 -170.00 -150.00 -130.00 -110.00 -90.00 -70.00 -50.00 -30.00 -10.00 10.00 02000400060008000100001200014000 Audio Frequency Audio Frequencyspec Exhibit 6C Applicant: Motorola Solutions FCC ID: AZ489FT4858 Modulation Limiting The Percentage of Max. Deviation on the “Z” axis is referenced to 2.5 kHz for 12.5 kHz bandwidth Exhibit 6D Applicant: Motorola Solutions FCC ID: AZ489FT4858 Occupied Bandwidth Data BANDWIDTH CALCULATIONS: Carson’s Rule for FM modulation is utilized to compute the bandwidth shown in the FCC emission designator. Carson’s Rule is: BW = 2 * (M + D) where: BW = Bandwidth M= Maximum modulating frequency D = Deviation Shown below are the calculations required for FCC ID: AZ489FT4858. EXHIBIT 6E-1 Standard Audio Modulation (12.5 kHz Channelization, Analog Voice): Emission Designator 11K0F3E In this case, the maximum modulating frequency is 3.0 kHz with a 2.5 kHz deviation. BW = 2(M+D) = 2*(3.0 kHz + 2.5 kHz) = 11 kHz =Î 11K0 F3E portion of the designator indicates voice. Therefore, the entire designator for 12.5 KHz channelization analog voice is 11K0F3E. EXHIBIT 6E-2 Digital (12.5 kHz Channelization, Digital Data): Emission Designator 8K10F1D The 99% energy rule (title 47CFR 2.989) was used for digital mode and is more accurate than Carson’s rule. It basically states that 99% of the modulation energy falls within X kHz, in this case, 8.10 kHz Measurements were performed in accordance with TIA/EIA TSB102.CAAB Section 2.2.5.2. The emission mask was obtained from 47CFR 90.210(d). F1D portion of the designator indicates digital data. Therefore, the entire designator for 12.5 kHz channelization digital data is 8K10F1D. EXHIBIT 6E-3 Digital (12.5 kHz Channelization, Digital Voice): Emission Designator 8…

Text truncated - open the document above for the full version.