AZ489FT4981Handheld Portable - TANAPA BPR 45 400-470 MHZ 4W NKP

____________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13f Template Revision 6 (11 June 2026) Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements pursuant to Part 2.911 (d)(7) for FCC ID: AZ489FT4981 Dear Sir/Madam, This letter is to confirm that Motorola’s Solutions Inc has a US Representative on behalf of for all future FCC certification/registrations. As the FCC Representative, we are aware of the requirements involved as outlined in US applicable document (FCC 22-84 and KDB 986446). US Representative Company Name: Motorola Solutions, Inc FRN Number: 0003778479 Company Grantee Code: AZ4 Contact Name: Mary Sampson Address: 2000 Progress Pkwy, Schaumburg, IL. 60196 Telephone Number: (770) 338-3464 E-mail: [email protected] Applicant Company Name: Motorola Solutions, Inc Company Grantee Code: AZ4 Applicant FRN: 0003778479 Contact Name: Arine Lee Address: Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia Telephone Number: +6042240258 Signed by the Applicant, Signed by the Agent, Name: Arine Lee Name: Mary Sampson Email: [email protected] E-mail: [email protected]

FCC ID: AZ489FT4981 _______________________________________________________________________________________________________________________ Motorola Solutions, Inc., Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13e Template Revision 7 (8 January 2026) Date: 24 July 2026 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements pursuant to Part 2.911 (d)(5)(i) and Part 2.911 (d)(5)(ii) with FCC ID: AZ489FT4981 Dear Sir/Madam, According to FCC 22-84 and KDB 986446, Motorola Solutions, Inc., certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Motorola Solutions, Inc., certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically name entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. We further attest that the equipment for which authorization is sought does not contain integrated Kaspersky cybersecurity and/or anti-virus software produced by Kaspersky Lab Inc. or any of its successors and assignees. In addition, it does not contain Uncrewed aircraft systems (UAS) and UAS critical components produced in a foreign country —except, until January 1, 2027, (a) UAS and UAS critical components included on the Defense Contract Management Agency’s (DCMA’s) Blue UAS list, and (b) UAS critical components that qualify as “domestic end products” under the Buy American Standard, 48 CFR 25.101(a)—and all communications and video surveillance equipment and services listed in Section 1709(a)(1) of the FY25 National Defense Authorization Act (Pub. L. 118-159). Sincerely, Arine Lee FCC/ISED Certification Manager E-mail : [email protected]

Agent Authorization Letter Date: 29 July 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia MD 21046 Subject: Product Certification Representative Authorization Letter FCC ID: AZ489FT4981 Product Name: BPR 45 (Portable 2 Way Radio) To whom it may concern: We, the undersigned, hereby authorize the following person to act as our agent in the preparation and submission of an application for equipment authorization in accordance with the FCC Rules and Regulations. RIOCEAN TECHNOLOGY SDN.BHD. Address : 1 1-3-2, NEW BOB CENTRE, JALAN GOTTLIEB,10350 GEORGE TOWN, PULAU PINANG, MALAYSIA Name : Aimee Wu Job Title : Authorized Agent e-mail : [email protected] We further certify that neither the applicant nor any party to this application, as defined in 47 CFR § 1.2002(b), is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862. This authorization also includes the authority to complete FCC Form 731 on our behalf and to sign the application as an authorized agent. Applicant : Motorola Solutions, Inc. Address : Plot 2A, Medan Bayan Lepas Mukim 12 SWD, Bayan Lepas 11900, Malaysia Signature : _________________________________ Name and Job Title : Arine Lee, FCC/ISED Certification Manager E-mail : [email protected] Tel. : (604)224 0258

FCC ID: AZ489FT4981 _______________________________________________________________________________________________________________________ Motorola Solutions, Inc.,Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13C Template Revision 7 (2 September 2025) 3 August 2026 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transceiver with FCC ID: AZ489FT4981. Dear Sir/Madam: This transmitter is designed to operate in the frequency ranges as described in Exhibit 13a: To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Motorola Solutions is requesting that the FCC lists the above applicable frequencies range under FCC Rule Parts 90 on the FCC Grant. For the FCC’s Rule Parts 90 applications, this radio is used in systems by Federal and Public Safety agencies including Police, Fire, and Emergency Medical Services, etc. as indicated in the table below. Equipment programming is the responsibility of Authorized Service Personnel. Also, the radio complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Per the FCC’s KDB634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz) Part 22 Part 24D Part 74 Part 80 Part 90 Federal Other Regions 400-406 x x 406.1-450 x 450-454 x 454-456 456-460 x 460-462.5375 x 462.5375-462.7375* x x 462.7375-467.5375 x 467.5375-467.7375 467.7375-470 x *Canada Please contact me if you required any additional information. Sincerely, ____________________ Arine Lee FCC/ISED Certification Manager E-mail : [email protected]

FCC ID: AZ489FT4981 ___________________________________________________________________________________________________________ ____________ Motorola Solutions, Inc., Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13b(ii) Template Revision 5 (8 January 2026) SHORT-TERM CONFIDENTIALITY REQUEST Date: 27 July 2026 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request of Transceiver with FCC ID: AZ489FT4981 Dear Sir / Madam, Pursuant to sections 0.457 and 0.459 of CFR 47, Public Notice DA 04-1705 of the Commission’s policy and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure until 180 days: ● External Photos (Ex03) ● Internal Photos (Ex09) ● Test set-up photos (Ex07) ● User Manual (Ex08) The application contains technical information, which Motorola Solutions, Inc. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Please contact me if you require any information. Sincerely, Arine Lee FCC/ISED Certification Manager E-mail : [email protected]

FCC ID: AZ489FT4981 _______________________________________________________________________________________________________________________ Motorola Solutions, Inc., Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13b(i) Template Revision 6 (8 January 2026) CONFIDENTIALITY REQUEST 24 July 2026 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transceiver with FCC ID: AZ489FT4981 Dear Sir / Madam, Motorola Solutions, Inc., is requesting that Exhibit 4 (Block Diagram), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola Solutions considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d), 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, ____________________ Arine Lee FCC/ISED Certification Manager E-mail : [email protected]

FCC ID: AZ489FT4981 _______________________________________________________________________________________________________________________ Motorola Solutions, Inc., Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13A Template Revision 11 (8 January 2026) Date: 24 July 2026 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for New Filing Certification of Transceiver with FCC ID: AZ489FT4981 Dear Sir/Madam, Motorola Solutions, Inc., herein submits application for Certification of the subject transceiver. This transmitter is intended for use in a Portable radio application with capabilities for clear and coded communications with a variable transmit power operating within the following frequency ranges: Product Name Model Numbers Frequency Range RF Power FCC Rules Part BPR 45 AAH88SCK8AA3AN LMR: 400 – 470 MHz 4 W (Rated Power) 4.8 W (Max Power) 90 We are requesting certification under Part(s) of the Commission’s Rules listed above to allow operation of this equipment. The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. If you require any additional information, please contact me at +604-2240258. Sincerely, Arine Lee FCC/ISED Certification Manager E-mail : [email protected]

FCC ID: AZ489FT4981/ IC: 109U-89FT4981 EXHIBIT 2d Template Revision 6 (8 January 2026) SHEET 1 OF 1 Certification Department Date: 27 July 2026 Subject: Authorization for FCC and ISED filing To Whom It May Concern: I hereby authorize Wong Chew Looi to sign Ex02a_Attestation_Product Family Declaration and Yeng Yee Yeong to sign RSS 102 Annex on my behalf, for the following FCC and IC: FCC ID: AZ489FT4981 IC: 109U-89FT4981 Please contact me if there are any questions or issues. Regards, Arine Lee FCC/ISED Certification Manager Tel: 604-2240258 E-mail : [email protected]

Applicant: Motorola Solutions Inc FCC ID: AZ489FT4981/ IC: 109U-89FT4981 EXHIBIT 2a Template Revision 10 (11 October 2024) SHEET 1 OF 3 EXHIBIT 2 Attestation and Product Family Declaration (Pursuant to FCC Part 2.907, 2.908 and RSP 100 Sec 4) 2.1 Statement of Certification Transceiver type described herein (AZ489FT4981/109U-89FT4981) is in compliance with all applicable parts of the FCC rules and ISED RSS standards. Each unit manufactured, imported, or marketed will conform to the samples tested herein, within the statistical variations that can be expected due to high volume production and test measurement error. NAME: CHEW LOOI WONG SIGNATURE: DATE: 9-Jul-2026 TITLE: Engineering Manager Applicant: Motorola Solutions Inc FCC ID: AZ489FT4981/ IC: 109U-89FT4981 EXHIBIT 2a Template Revision 10 (11 October 2024) SHEET 2 OF 3 2.2 Spectrum Efficiency Declaration The device supports TDMA (F2) transmission with 12.5 kHz spacing. Each transmit slot is 30 ms long and it is followed by 30 ms standby / receive. Transmission in digital TDMA mode (according to 6.25e efficiency standard) allows improved spectrum utilization whereby, the existing 12.5 kHz channel now allows two voice conversations to take place instead of one. Furthermore, the portable radio has integrated voice & data feature that extends the capability of the system to send & receive data through conventional infrastructure. This device is also capable of supporting a minimum data rate of 4800 bits per second per 6.25kHz channel bandwidth. NAME: CHEW LOOI WONG SIGNATURE: DATE: 9-Jul-2026 TITLE: Engineering Manager Applicant: Motorola Solutions Inc FCC ID: AZ489FT4981/ IC: 109U-89FT4981 EXHIBIT 2a Template Revision 10 (11 October 2024) SHEET 3 OF 3 2.3 Product Family Declaration FCC Model Number Hardware Version Identification Number (HVIN) Product Marketing Name (PMN) Software Version (FVIN) Description AAH88SCK8AA3AN AAH88SCK8AA3AN BPR 45 T.0.00.07 PORTABLE RADIO BPR 45 400-470MHZ 4W 64CH NAME: CHEW LOOI WONG SIGNATURE: DATE: 9-Jul-2026 TITLE: Engineering Manager

Applicant: Motorola Solutions Inc FCC ID: AZ489FT4981/ IC: 109U-89FT4981 EXHIBIT 1 Template Revision 6 (12 November 2025) SHEET 1 OF 2 EXHIBIT 1 IDENTIFICATION LABEL (Pursuant to FCC Part 2.1033(c)(11), 2.1033(b)(7) and RSP 100 Annex C and Sec 3) MARKINGS (TEXT) X Label Attached Below. X Actual location of the FCC/IC label on the device. Figure 1: FCC/IC Label for BPR 45 Applicant: Motorola Solutions Inc FCC ID: AZ489FT4981/ IC: 109U-89FT4981 EXHIBIT 1 Template Revision 6 (12 November 2025) SHEET 2 OF 2 Figure 2: FCC/IC Label Location *** END ***

FCC ID: AZ489FT4981 / IC: 109U-89FT4981 Report ID: P1803N00-EME-00003 Motorola Solutions Inc. EME Form-SAR-Rpt-Rev. 13.40 Page 1 of 82 SAR TEST REPORT Motorola Solutions Inc. EME Test Laboratory Motorola Solutions Malaysia Sdn Bhd Plot 2A, Medan Bayan Lepas, Mukim 12 SWD 11900 Bayan Lepas Penang, Malaysia. Date of Report: 06/16/2026 Report Revision: C Responsible Engineer: Yeng Yee Yeong (EME Engineer) Report Author: Muhammad Hizami bin Ismail (Senior Technician) Date/s Tested: Test Location: 04/25/2026 - 04/28/2026, 05/13/2026 – 05/16/2026 Penang EME Laboratory Manufacturer: Motorola Solutions Malaysia Sdn Bhd. Manufacturer Location: Hardware Receive Date: Plot 2A, Medan Bayan Lepas Mukim, 12 SWD, 11900 Bayan Lepas, Penang, Malaysia 04/23/2026 DUT Description: Handheld Portable – TANAPA BPR 45 400-470 MHZ 4W NKP Test TX mode(s): CW (PTT) Max. Power output: Refer table 3 Tx Frequency Bands: Refer table 3 Signaling type: Refer table 3 Model(s) Tested: AAH88SCK8AA3AN Model(s) Certified: (HVIN/PMN) Refer 1.0 Introduction Serial Number(s): 46326CG0037 Classification: Occupational/Controlled Environment Applicant Name: Applicant Address: Motorola Solutions Inc. Plot 2A, Medan Bayan Lepas Mukim, 12 SWD, 11900 Bayan Lepas, Penang, Malaysia Firmware Version (FVIN): T0.00.07 FCC ID: AZ489FT4981 This report contains results that are immaterial for FCC equipment approval, which are clearly identified. FCC Test Firm Registration Number: 823256 IC: 109U-89FT4981 This report contains results that are immaterial for ISED equipment approval, which are clearly identified. ISED Test Site registration: 24843 The test results clearly demonstrate compliance with Occupational/Controlled RF Exposure limits of 8 W/kg averaged over 1 gram per the requirements of FCC 47 CFR § 2.1093 and RSS-102 (Issue 6) Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 4.0 of this report (no deviation from standard methods). This report shall not be reproduced without written approval from an officially designated representative of the Motorola Solutions Inc EME Laboratory. I attest to the accuracy of the data and assume full responsibility for the completeness of these measurements. The results and statements contained in this report pertain only to the device(s) evaluated. Saw Sun Hock (Approval Signatory) Approved Date: 06/16/2026 FCC ID: AZ489FT4981 / IC: 109U-89FT4981 Report ID: P1803N00-EME-00003 Motorola Solutions Inc. EME Form-SAR-Rpt-Rev. 13.40 Page 2 of 82 Contents: 1.0 Introduction .......................................................................................................................... 5 2.0 FCC SAR Summary .............................................................................................................. 5 3.0 Abbreviations / Definitions ................................................................................................. 5 4.0 Referenced Standards and Guidelines .............................................................................. 6 5.0 Description of Device Under Test (DUT) ............................................................................ 7 6.0 Optional Accessories and Test Criteria ............................................................................. 8 6.1 Antennas ................................................................................................................... 8 6.2 Battery ....................................................................................................................... 8 6.3 Body worn Accessories ........................................................................................... 8 6.4 Audio Accessories ................................................................................................... 9 7.0 Description of Test System ................................................................................................ 9 7.1 Descriptions of Robotics/Probes/Readout Electronics ..................................... 10 7.2 Description of Phantom(s) .................................................................................... 10 7.3 Description of Simulated Tissue ........................................................................... 11 8.0 Additional Test Equipment ............................................................................................... 12 9.0 SAR Measurement System Validation and Verification ................................................. 13 9.1 System Validation .................................................................................................. 13 9.2 System Verification ................................................................................................ 13 9.3 Equivalent Tissue Test Results ............................................................................. 14 10.0 Environmental Test Conditions ........................................................................................ 15 11.0 DUT Test Setup and Methodology ................................................................................... 15 11.1 Measurements ....................................................................................................... 15 11.2 DUT Configuration(s) ............................................................................................ 16 11.3.1 Body .......................................................................................................... 16 11.3.2 Head .......................................................................................................... 17 FCC ID: AZ489FT4981 / IC: 109U-89FT4981 Report ID: P1803N00-EME-00003 Motorola Solutions Inc. EME Form-SAR-Rpt-Rev. 13.40 Page 3 of 82 11.3.3 Face ........................................................................…

Text truncated - open the document above for the full version.

Test Report# TR_27474-26_FCC 90_BPR45_ Revision: 5 Test Report - FCC Part 90 Applicant: Motorola Solutions Inc. Signature: (On behalf of Tim Royer) Name & Title: Stephen Whalen, Lab Manager Date of Signature 07-04-2026 Prepared By: Mark Learner This test report relates only to the items tested as identified and is not valid for any subsequent changes or modifications made to the equipment under test. 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 2 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) Table of Contents 1.APPLICANT INFO RMATION ...................................................................................................................................................... 5 1.1 PART 90 TEST RESULT SUMMARY ....................................................................................................................................................................... 5 2.LOCATION OF TESTING ............................................................................................................................................................ 6 2.1 TEST LABORATORY .............................................................................................................................................................................................. 6 3.TEST SAMPLE(S) (EUT/DUT) ...................................................................................................................................................... 6 3.1 DESCRIPTION OF THE EUT ...................................................................................................................................................................................7 3.2 CONFIGURATION OF EUT ................................................................................................................................................................................... 8 3.3 TEST SETUP OF EUT ............................................................................................................................................................................................ 8 4.TEST METHODS & APPLICABLE REGULATORY LIMITS ....................................................................................................... 9 4.1 TEST METHODS/STANDARDS/GUIDANCE: .......................................................................................................................................................... 9 4.2 APPLIED LIMITS AND REGULATORY LIMITS: ......................................................................................................................................................... 9 5.MEASUREMENT UNCERTAINTY ............................................................................................................................................... 9 6.ENVIRONMENTAL CONDITIONS ............................................................................................................................................ 9 6.1 TEMPERATURE & HUMIDITY ................................................................................................................................................................................ 9 7.LIST OF TEST EQUIPMENT AND TEST FACILITY .................................................................................................................. 11 7.1 LIST OF TEST EQUIPMENT ................................................................................................................................................................................... 11 8.TEST RESULTS ............................................................................................................................................................................ 12 8.1 POWER AT THE FINAL AMPLIFIER ....................................................................................................................................................................... 13 8.2 RF OUTPUT POWER ........................................................................................................................................................................................... 14 8.3 BANDWIDTH & EMISSION .................................................................................................................................................................................. 15 8.3.1 99% Bandwidth Plot, 12.5 kHz Analog, 403.025 MHz, Mode 1 ............................................................................................... 17 8.3.2 99% Bandwidth Plot, 25 kHz Analog, 403.025 MHz, Mode 1 .................................................................................................. 18 8.3.3 99% Bandwidth Plot, 12.5 kHz Digital, 403.025 MHz, Mode 1 ................................................................................................ 19 8.3.4 99% Bandwidth Plot, 12.5 kHz Analog, 406.2 MHz, Mode 1 .................................................................................................. 20 8.3.5 99% Bandwidth Plot, 25 kHz Analog, 406.2 MHz, Mode 1 ...................................................................................................... 21 8.3.6 99% Bandwidth Plot, 12.5 kHz Digital, 406.2 MHz, Mode 1 .................................................................................................... 22 8.3.7 99% Bandwidth Plot, 12.5 kHz Analog, 429.9875 MHz, Mode 1 ............................................................................................ 23 8.3.8 99% Bandwidth Plot, 25 kHz Analog, 429.9875 MHz, Mode 1 ............................................................................................... 24 8.3.9 99% Bandwidth Plot, 12.5 kHz Digital, 429.9875 MHz, Mode 1 ....................................................…

Text truncated - open the document above for the full version.

13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 62 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.14 Conducted Emissions, Above 1GHz, 12.5 kHz Analog, 429.9875 MHz, Mode 1 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 63 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.15 Conducted Emissions Below 1GHz, 25 kHz Analog, 429.9875 MHz, Mode 1 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 64 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.16 Conducted Emissions Above 1GHz, 25 kHz Analog, 429.9875 MHz, Mode 1 Ref 38.6 dBmAtt 10 dB * Offset 38.6 dB A LVL Start 1 GHzStop 5 GHz400 MHz/ * RBW 1 MHz SWT 80 ms * VBW 3 MHz 3DB *1 AP VIEW -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -30.54 dBm 3.192000000 GHz D1 -13 dBm Date: 12.MAY.2026 11:22:35 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 65 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.17 Conducted Emissions Below 1GHz, 12.5 kHz Digital, 429.9875 MHz, Mode 1 A Att 10 dB * Ref 38.6 dBm Offset 38.6 dB LVL 97 MHz/Start 30 MHzStop 1 GHz * * RBW 100 kHz VBW 300 kHz SWT 100 ms 3DB *1 RM VIEW -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] 15.01 dBm 429.640000000 MHz D1 -13 dBm Date: 12.MAY.2026 10:29:30 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 66 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.18 Conducted Emissions Above 1GHz, 12.5 kHz Digital, 429.9875 MHz, Mode 1 Ref 38.6 dBmAtt 10 dB * Offset 38.6 dB A LVL Start 1 GHzStop 5 GHz400 MHz/ * RBW 1 MHz SWT 80 ms * VBW 3 MHz 3DB *1 AP VIEW -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -30.43 dBm 3.192000000 GHz D1 -13 dBm Date: 12.MAY.2026 11:28:36 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 67 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.19 Conducted Emissions, Below 1GHz, 12.5 kHz Analog, 450.025 MHz, Mode 1 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 68 of 109 This test report shall not be reproduced except in full without the written and signed permission of IIA Lab Services LLC. a subsidiary of Industrial Inspection & Analysis, Inc. (“IIA”) 8.5.20 Conducted Emissions, Above 1GHz, 12.5 kHz Analog, 450.025 MHz, Mode 1 13146 NW 86 th Drive, Suite 400, Alachua, Florida 32615 (352) 472-5500 / [email protected] Page 69 of 109 This test report shall not be reproduced except in ful…

Text truncated - open the document above for the full version.