AZ489FT4868MoC Service Prompter

Motorola NAME TM Series Installation and Programming Instructions MOC4600iMOC4603i *6880309R83* 6880309R83-O 021024a.eps PRELIMINARY DRAFT MANUAL Motorola OnCallTM Series Motorola NAME TM Series Installation and Programming Instructions MOC4600iMOC4603i 6880309R83-O 2 Computer Softwa re Copyrights The Motorola products described in this manual ma y include copyrighted Motorola computer programs stored in semiconductor memories or other medi a. Laws in the United States and other countries preserve for Motorola certain exclusive rights fo r copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer progr ams contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel , or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operat ion of law in the sale of a product. Document CopyrightsNo duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this ma nual may be reproduced, distributed, or transmitted in any form or by any means, elec tronic or mechanical, for any pur pose without the express written permission of Motorola. DisclaimerThe information in this document is carefully examin ed, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Further more, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any produc t or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. TrademarksMOTOROLA and the Stylized M logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.© Motorola, Inc. 2004. QRC Contents 1 Contents Introduction . . . . . . . . . . . . . . . . . . . . .2FCC Licensing Information . . . . . . . . .3Product Safety and RF Exposure Compliance . . . . . . . . . . . . . . . . . . . .5 Getting to Know your MOC . . . . . . . .10Using the MOC . . . . . . . . . . . . . . . . . .11 Activation . . . . . . . . . . . . . . . . . . . . . . . 11Deactivation . . . . . . . . . . . . . . . . . . . . . 11 Installation and Programming . . . . . .12 Installing the Batteries . . . . . . . . . . . . . 12 Installing the Service Button Label . . . 13Programming . . . . . . . . . . . . . . . . . . . . 14Reassembling the MOC . . . . . . . . . . . . 24Wall Mounting . . . . . . . . . . . . . . . . . . . 25 MOC Factory Defaults . . . . . . . . . . . . 26External Monitor (Optional) . . . . . . . . 27 External Contact Definitions . . . . . . . . . 27Wiring Recommendations . . . . . . . . . . 28Wiring Instructions . . . . . . . . . . . . . . . . 28 Limited Warranty . . . . . . . . . . . . . . . . 30 Introduction 2 IntroductionThank you for purchasing the Motorola NAME™.The Motorola NAME™ Series is a product of Motorola’s 70-plus years of experience as a world leader in the designing and manufacturing of communications equipment. The NAME™ Series products, in combination with Motorola professional two-way radios, are a perfect cost-effective communi cations solution for all of today’s fast- paced industries.Product registration is an important step. Registering helps us facilitate warranty service and permits us to contact you should your Motorola product require an update or other service. To register your product on-line, visit www.motorola.com/warranty/radios . Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to prov ide a copy of your dated sales receipt to confirm warranty status. Re gistration is not required for warranty coverage. Note: Please be sure to save these installation and programming instructions for future reference. FCC Licensing Information 3 FCC Licensing InformationThe Motorola OnCall (MOC) units operate on radio frequencies that are regulated by the Federal Communications Commission (FCC). In order to transmit on these frequencies, you are required to have a license issued by the FCC.Application is made available on FC C Form 601 and Schedules D, H, and Remittance Form 159.To obtain these FCC forms please request document 000601 which includes all forms and instructions. If you wish to have the document faxed, mailed or have questions, please use the following contact information. Faxed: Contact the Fax-On-Demand system at:1-202-418-0177 Mailed: Call the FCC forms hotline at:1-800-418-FORM 1-800-418-3676Questions regarding FCC license: Contact the FCC at:1-888-CALL-FCC1-888-225-5322Or: http://www.fcc.govBefore filling out your application, you must de cide which frequency(ies) you can operate on. For questions on determinin g your radio frequency, please call Motorola Product Services at: 1-800-448-6686.Changes or modifications not expressly approved by Motorola may void the user’s authority granted by the FCC to operate this device and should not be FCC Licensing Information 4 made. To comply with FCC requirements , transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organiza tion representative of the user of those services.Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authoriz a…

Text truncated - open the document above for the full version.

FCC ID: AZ489FT4868 ______________________________________________________________________________ Motorola Inc 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. CONFIDENTIALITY REQUESTED Date: 29th June 2004 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ489FT4868. Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos) and Exhibit 9, (Internal Photos) as Temporary Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” and Exhibit 3 and 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13B

Correspondence Summary Q & A July 13, 2004 SUBJECT: MOTOROLA - FCC ID: AZ489FT4868 TCB Question: SAR report: Please, explain the use of liquid dielectric parameters for the body, as it appears that this device is used close to the face during normal operation (typically 2 to 3" from the face according to user's manual instructions). Applicant Answer: The user only speaks into the unit when recording a voice message that will be played when a customer pushes the button for assistance. The radio does not transmit during the voice record mode. This is noted in the manual excerpt below. Device Operation Mount the device in a vertical position. The recommended mounting height is 48 inches from the floor. When recording your messages on the MOC, the recommended distance from the device to the lips is two to three inches (5.0 to 7.5 cm). Not performing this accurately may result in audio distortion. TIMCO ENGINEERING INC. 849 NW State Road 45 Newberry, Florida 32669 http://www.timcoengr.com 888.472.2424 F 352.472.2030 [email protected]

FCC ID: AZ489FT4868 EXTERNAL PHOTOGRAPHS 1 Front view of Call box 2 Front view of Call box with out front covers. 3 Rear view of Call box with battery cover. 4 Rear view of Call box without battery cover. EXHIBIT 3 FCC ID: AZ489FT4868 Front view of Unit Front view of Unit with cover removed Exhibit 3A FCC ID: AZ489FT4868 Rear view with Battery cover Rear view with out Battery cover Rear view with out Battery cover, and batteries. Exhibit 3B

FCC ID: AZ489FT4868 LIST OF EXHIBITS DESCRIPTION EXHIBIT REFERENCE I. Identification label information 1 2.983-(f) & General Information 1a 1. Production Plans 2.981-(a) 2. Application References 2.1061 3. Data Submittal Procedure 4. Similar Applications II. Certification of Data 2 III. External Photographs 3 2.983-(g) IV. Circuit Description 4 1. Frequency Stabilizing 4A 2. Modulation Limiting 4B and Post Limiter Filter 3.Harmonic Suppression 4C 4.Power Limiting 4D V. Schematic Diagrams 5 2.983-(d)-7 VI. Test Report 6 1. Data Index 6 2. RF Output Data 6A 2.985 3. Modulation Characteristics 2.987 A. Audio Response & Low Pass Filter Response 6B, 9C B. Modulation Limiting 6D 4. Occupied Bandwidth 6E 2.989 5. Radiated Spurious Emissions 6F 2.993 6. Frequency Stability (Temperature & Supply Voltage) 6G 2.995 7. Transient Frequency Behavior 6H 90.214 VII. Test Set-up Procedures 7 2.999 VIII. Instruction Manual 8 2.983-(d)-8 IX. Internal Photographs. 9 2.983-(g) X. Parts List and Tune-Up procedures 10 2.983-(d)-6, 9 XI. RF Exposure Information 11 2.1093 XII. Operational Description 12 2.983- (d)1,2,3,4,5 1. Technical Characteristics 2. Application XIII. Cover Letter 13 FCC ID: AZ489FT4868 IDENTIFICATION LABEL LOCATION X See the attached Photograph or Sketch Back of Radio Back of Radio under Belt Clip TYPE X The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/ inch. The label is laser etched into the Urethane paint, exposing the Nickel plating on the Zamak casting substrate. Since no adhesive is required, the label is permanent and tamper-proof. (** - NOTE- The label attached below is a paper polyester film laminate, as described above. This is just for sample purposes, as the actual label is laser etched into the casting) EXHIBIT 1 FCC ID: AZ489FT4868 GENERAL INFORMATION I. Production Plans—Pursuant 2.983 ( c ). Quantity production is planned. II. Application References -- Pursuant 2.1061 Reference is made to the following Motorola “Application References” 1. Portable Products and their application. 2. Portable Products Transmitter Modulations Methods. III. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commissions’ Rules. IV. Similar, currently Type Accepted Transmitter, FCC ID: AZ489FT4841. EXHIBIT 1A

FCC ID: AZ489FT4868 INTERNAL PHOTOGRAPHS: 1 Display side, View of PC Board 2 Component side, of PC Board Exhibit 9 FCC ID: AZ489FT4868 Display side of PC board. Component side of PC board Exhibit 9 Component side of PC board with out shield Exhibit 9B

CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 1 of 16 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 S.A.R. EME Compliance Test Report Part 1 of 2 Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. Signature on file 6/9/04 ____________________________________________________________ _________________________ Ken Enger Date Approved Senior Resource Manager, Laboratory Director, CGISS EME Lab Note: This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. Date of Report: June 9, 2004 Report Revision: Rev. O Manufacturer: Motorola Product Description: MOC4600i 458-470MHz, 0.25/0.50/0.75 Watts, Service prompter (call box) FCC ID: AZ489FT4868 Device Model: RLE1062A Certificate Number: 1449-01 Test Period: 05/28/04 – 06/01/04 EME Tech: Kim Uong (Lead EME Engineer) EME Eng.: Kim Uong (Lead EME Engineer) Author: Kim Uong (Lead EME Engineer) CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 2 of 16 TABLE OF CONTENTS Part 1 of 2 1.0 Introduction 2.0 Reference Standards and Guidelines 3.0 Description of Test Sample 3.1 Test Signal 3.2 Test Output Power 4.0 Description of Test Equipment 4.1 Description of S.A.R Measurement System 4.2 Description of Phantom 4.2.1 Flat Phantom 4.2.2 SAM phantom 4.3 Simulated Tissue Properties 4.3.1 Type of Simulated Tissue 4.3.2 Simulated Tissue Composition (System Performance) 4.4 Test conditions 5.0 Description of Test Procedure 5.1 Device Test Positions 5.1.1 Body 5.1.2 Head 5.1.3 Face 5.2 Test Position Photographs 5.3 Probe Scan Procedures 6.0 Measurement Uncertainty 7.0 S.A.R. Test Results 7.1 S.A.R. results 7.2 Peak S.A.R. location 7.3 Highest S.A.R. results calculation methodology 8.0 Conclusion Part 2 of 2 Appendix A: Power Slump Data/Shortened scan Appendix B: Data Results Appendix C: Dipole System Performance Check Results Appendix D: Calibration Certificates CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 3 of 16 REVISION HISTORY Date Revision Comments 06/09/04 O Release of Prototype results CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 4 of 16 1.0 Introduction This report details the utilization, test setup, test equipment, and test results of the Specific Absorption Rate (S.A.R.) measurements performed at the CGISS EME Test Lab for model number RLE1062A, FCC ID: AZ489FT4868. The applicable exposure environment is General Population/Uncontrolled. 2.0 Reference Standards and Guidelines This product is designed to comply with the following national and international standards and guidelines. • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • IEEE 1528, 2003 "Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques" • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Terminal frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003 • ANATEL, Brazil Regulatory Authority, Resolution No. 303 of July 2, 2002 "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9KHz and 300 GHz." and “Attachment to resolution # 303 from July 2, 2002”. CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 5 of 16 3.0 Description of Test Sample FCC ID: AZ489FT4868 is a Motorola On Call (M.O.C.) service prompter device using Frequency Modulation (FM). This device is intended to be used in the retail stores environment to send a “customer need assistance” message to the retail store worker when the customer presses the button on the front of the device. Once the button is pressed the outgoing message can be set to repeat a maximum of 8 repetitions. The out going message length is 1 second minimum and 8 seconds maximum; time between the messages is 3 seconds minimum and 120 seconds maximum. The maximum transmission duty cycle of this M.O.C. is 73%. FCC ID: AZ489FT4868 is capable of operating in the 458 - 470 MHz* band and can be programmed to operate in three different rated power levels 0.25watts, 0.5watts, and 0.75 watts with a maximum output capability of 0.760 watts as defined by the upper limit of the production line final test station. *Note: The U.S. frequency band is 460-470MHz. FCC ID: AZ489FT4868 is offered with the following: Antenna Description Fixed Helical 1/4 wave antenna; 458-470 MHz; -2.0dBi gain Battery C-Cell Standard C Alkaline battery CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 6 of 16 3.1 Test Signal Test Signal mode: Transmission Mode: CW X Native Transmission TDMA: 1:6, 1:3, 81:120, 114:120 Other: 3.2 Test Output Power A table of the characteristic power slump versus time is provided in Appendix A . 4.0 Description of Test Equipment 4.1 Descriptions of S.A.R. Measurement System The laboratory utilizes a Dosimetric Assessment System (DASY3) S.A.R. measurement system manufactured by Schmid & Partner Engineering AG (SPEAG™), of Zurich Switzerland. The test system consists of a Stäubli RX90L robot with an ET3DV6 E-Field probe. Please reference the SPEAG user manual and application notes for detailed probe, robot, and S.A.R. computational procedures. The S.A.R. measurements were conducted with probe model/serial number ET3DV6/SN1545. The system performance check was conducted daily and within 24 hours prior …

Text truncated - open the document above for the full version.

CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 1of 29 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 S.A.R. EME Compliance Test Report Part 2 of 2 Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with all applicable national and international reference standards and guidelines. Signature on file 6/9/04 ____________________________________________________________ _________________________ [Ken Enger] Date Approved [Senior Resource Manager, Product Safety and EME Director, Phone: 954-723-6299] Note: Consistent with the ISO/IEC 17025 recommendation this report shall not be reproduced in part without written approval from an officially designated representative of the Motorola EME Laboratory. A2LA Accredited certificate No. 1449-01 Test Period: 05/28/04 – 06/01/04 EME Tech: Kim Uong (Lead EME Engineer) EME Eng.: Kim Uong (Lead EME Engineer) Author: Kim Uong (Lead EME Engineer) Date of Report: June 9, 2004 Report Revision: Rev. O Manufacturer: Motorola Product Description: MOC4600i 458-470MHz, 0.25/0.50/0.75 Watts, Service prompter (call box) FCC ID: AZ489FT4868 Device Model: RLE1062A CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 2of 29 APPENDIX A Power Slump Data/Shortened Scan CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 3of 29 DUT Power versus time data CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 4of 29 Shortened Scan of Highest S.A.R. Configuration FCC ID:AZ489FT4868; Test Date: 06/01/04 Motorola CGISS EME Laboratory Run #: KU-R2-040601-09 Model #: RLE1062A TX Freq: 458.6625MHz Sim Tissue Temp: 20.3 C Antenna: Fixed Battery Kit: C-Alkaline batteries Carry: None Audio Acc.: None Shortened scan reflect highest S.A.R. producing configuration; Run time 7minutes. Representative “normal” scan run time was 23 minutes “Shortened” scan max calculated S.A.R. using end power: 1-g Avg. = 1.07 mW/g; 10-g Avg. = 0.74 mW/g “Normal” scan max calculated S.A.R. using end power: 1-g Avg. = 1.15 mW/g; 10-g Avg. = 0.80 mW/g (see section 7.1 run # KU-R2-040601-05) DUT front against the phantom Flat (2) Phantom; Device 2 Section; Probe: ET3DV6R - SN1545 Probe cal date: 28/08/03; ConvF(7.00,7.00,7.00); Crest factor:1.0; FCC Body 464: σ = 0.95 mho/m εr = 54.3 ρ = 1.00 g/cm3; DAE3V1SN406 Cal Date: (11/20/03) Cube 5x5x7: SAR (1g): 1.35 mW/g, SAR (10g): 0.935 mW/g, (Worst-case extrapolation) Power drift: -0.34 dB CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 5of 29 APPENDIX B Data Results CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 6of 29 FCC ID:AZ489FT4868; Test Date: 06/01/04 Motorola CGISS EME Laboratory Run #: KU-R2-040601-05 Model #: RLE1062A TX Freq: 458.6625 MHz Sim Tissue Temp: 20.2 C Antenna: Fixed Battery Kit: C-Alkaline batteries Carry: None Audio Acc.: None DUT front against the phantom Flat (2) Phantom; Device 2 Section; Probe: ET3DV6R - SN1545 Probe cal date: 28/08/03; ConvF(7.00,7.00,7.00); Crest factor:1.0; FCC Body 464: σ = 0.95 mho/m εr = 54.3 ρ = 1.00 g/cm3; DAE3V1SN406 Cal Date: (11/20/03) Cube 5x5x7: SAR (1g): 1.43 mW/g, SAR (10g): 0.990 mW/g, (Worst-case extrapolation) Coarse: Dx = 15.0, Dy = 15.0, Dz = 10.0; Max at 76.5, 106.5, 4.7 Power drift: -0.42 dB CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 7of 29 APPENDIX C Dipole System Performance Check Results Dipole validations at the head from SPEAG are provided herein. The CGISS EME lab validated the dipole to the applicable IEEE system performance targets. Within the same day system validation was performed using FCC body tissue parameters to generate the system performance target values for body at the applicable frequency. The results of the CGISS EME system performance validation are provided in this appendix. CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 8of 29 SPEAG Dipole D450 V2 SN 1002; Test Date: 05/28/04 Motorola CGISS EME Lab Run #: Sys Perf-R2-040528-01 TX Freq: 450 MHz Sim Tissue Temp: 19.9C Start Power: 250mW Target at 1W is 4.71mW/g (including drift) (1g) SAR calculated is 4.65 mW/g, Percent from target (including drift) for 1g is -1.2 % Flat (2); Probe: ET3DV6R - SN1545(cal Date 28 Aug 2003); ConvF(7.00,7.00,7.00); Crest factor: 1.0; FCC Body 450: σ = 0.94 mho/m εr = 54.0 ρ = 1.00 g/cm3; DAE3V1SN406 Cal Date: (11/20/03) Cubes (2): Peak: 1.77 mW/g ± 0.03 dB, SAR (1g): 1.15 mW/g ± 0.04 dB, SAR (10g): 0.763 mW/g ± 0.05 dB, (Worst-case extrapolation)Penetration depth: 12.8 (11.6, 14.4) [mm] Power drift: -0.05 dB CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 9of 29 SPEAG Dipole D450 V2 SN 1002; Test Date: 06/01/04 Motorola CGISS EME Lab Run #: Sys Perf-R2-040601-01 TX Freq: 450 MHz Sim Tissue Temp: 20.6C Start Power: 250mW Target at 1W is 4.71mW/g (including drift) (1g) SAR calculated is 4.61 mW/g, Percent from target (including drift) for 1g is -2.11 % Flat (2); Probe: ET3DV6R - SN1545(cal Date 28 Aug 2003); ConvF(7.00,7.00,7.00); Crest factor: 1.0; FCC Body 450: σ = 0.94 mho/m εr = 54.4 ρ = 1.00 g/cm3; DAE3V1SN406 Cal Date: (11/20/03) Cubes (2): Peak: 1.79 mW/g ± 0.01 dB, SAR (1g): 1.15 mW/g ± 0.03 dB, SAR (10g): 0.760 mW/g ± 0.04 dB,(Worst-case extrapolation) Penetration depth: 12.6 (11.4, 14.1) [mm] Power drift: -0.01 dB CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 10of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 11of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 12of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 13of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 14of 29 APPENDIX D Calibration Certificates CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 15of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 16of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 17of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 18of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 19of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 20of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 21of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 22of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 23of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 24of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 25of 29 CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 26of 29 CGISS EME F…

Text truncated - open the document above for the full version.

FCC ID: AZ489FT4868 Test Report MEASUREMENT EXHIBIT NUMBER OF PAGES 1 RF Power Output 6A 1 2 Audio Response 6B 1 A. 3/4Watt 12.5kHz / 25kHz 3 Modulation Limiting 6C 1 A. 3/4Watt 12.5KHz / 25KHz 4 Occupied Bandwidth 6D 1-2 3 5 Radiated Spurious Emission A. TX Vertical / Horizontal 3/4W 6E 1-2 3 6 Frequency Stability 2 A. Temperature 6F B. Frequency vs. Voltage 6F1 C. Transient Frequency Behavior 6G 4 EXHIBIT 6 FCC ID: AZ489FT4868 RF POWER OUTPUT DATA The RF power output was measured according to the TIA/EIA-603-A Conducted power out methods of Measurement for Transmitters Conducted RF power out 1/4W 0.259W DC Voltage 4.5Vdc DC Current .331Amps Conducted RF power out 1/2W 0.500W DC Voltage 4.5Vdc DC Current .445 Amps Conducted RF power out 3/4W 0.760W DC Voltage 4.5Vdc DC Current .570Amps EXHIBIT 6A FCC ID: AZ489FT4868 AUDIO RESPONSE Tx Audio Re s pons e (M SP 3/4W CH1 SNxxxx, 12.5k Hz chs p 05/13/04) -25 -20 -15 -10 -5 0 5 10 15 100100010000 Audio Freq (Hz) deviation ratio (dB) Da t a LL UL Tx Audio Response (MSP 3/4W CH1 SNxxxx, 25k Hz chs p 05/14/04) -25 -20 -15 -10 -5 0 5 10 15 100100010000 Audio Freq (Hz) deviation ratio (dB) Da t a LL UL EXHIBIT 6B FCC ID: AZ489FT4868 MODULATION LIMITING Modulation Limiting(MSP 3/4W CH1 SNxxx, 12.5kHz chsp 05/13/04) 0 500 10 0 0 15 0 0 2000 2500 -25-20-15-10-50510152025 input level ( dB) 300Hz 1K H z 3kHz UL Modulation Limiting (MSP 3/4W CH1 SN0283, 25kHz chsp 05/14/04) 0 10 0 0 2000 3000 4000 5000 - 2 5- 2 0- 15- 10- 50510152 02 5 input level (dB) 300Hz 1K H z 3kHz UL EXHIBIT 6C FCC ID: AZ489FT4868 OCCUPIED BANDWIDTH DATA 12.5kHz / 25kHz Channel Spacing EXHIBIT 6D-1 2500 Hz Audio Modulation Emission Type: 11K0F3E / 16K0F3E Specification Mask D, 90.210 – 12.5kHz Specification Mask B, 90.210 – 25kHz EXHIBIT 6D-2 2500 Hz & 77Hz Tone “PL” Modulation Emission Type: 11K0F3E / 16K0F3E Specification Mask D, 90.210 – 12.5kHz Specification Mask B, 90.210 – 25kHz CARSON’S RULE: 11K0F3E BW= 2(M+D) BW=2(3kHz maximum modulation frequency +2.5kHz deviation) CARSON’S RULE: 16K0F3E BW= 2(M+D) BW=2 (3kHz maximum modulation frequency +5 kHz deviation) BW=2 (8) BW= 16K0 EXHIBIT 6D FCC ID: AZ489FT4868 Sideband Spe ctrum 2.5kHz tone wo/PL (MSP 3/4W CH1 SN 158ABC0001, 12.5kHz chsp 05/14/04) -50.00 -45.00 -40.00 -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 10.00 15.00 20.00 25.00 30.00 464.4375 464.4475 464.4575464.4675 464.4775 464.4875 464.4975 464.5075464.5175 464.5275 464.5375 464.5475 464.5575 frequency (MHz) Power (dBm), 10dB/div unmodulat ed 2.5kHz t one SPECS Side band Spe ctr um 2.5k Hz tone w o/PL (M SP 3/4W CH1 SN 158ABC0001, 25k Hz chs p 05/14/04) -50.00 -40.00 -30.00 -20.00 -10.00 0.00 10.00 20.00 30.00 464.42750464.44750464.46750464.48750464.50750464.52750464.54750464.56750 frequency (MHz) Power (dBm), 10dB/div unmodulat ed 2.5k Hz t one SPECS EXHIBIT6D-1 11K0F3E MASK D 16K0F3E MASK B FCC ID: AZ489FT4868 Side band Spe ctrum 2.5k Hz tone w /PL (M SP 3/4W CH1 SN 158ABC0001, 12.5k Hz chs p 05/14/04) -50.00 -45.00 -40.00 -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 10.00 15.00 20.00 25.00 30.00 464.4375464.4475464.4575464.4675464.4775464.4875464.4975464.5075464.5175464.5275464.5375464.5475464.5575 frequency (MHz) Power (dBm), 10dB/div unmodulat ed 2. 5kHz t one SPECS Sideband Spectrum 2.5kHz tone w /PL (MSP 3/4W CH1 SN 158ABC0001, 25kHz chsp 05/14/04) -50.00 -40.00 -30.00 -20.00 -10.00 0.00 10.00 20.00 30.00 464.42750464.44750464.46750464.48750464.50750464.52750464.54750464.56750 frequency (MHz) Power (dBm), 10dB/div unmodul at ed 2. 5kHz t one SPECS EXHIBIT 6D-2 11K0F3E MASK D 16K0F3E MASK B FCC ID: AZ489FT4868 Transmitter Radiated Spurious Emission Transmitter Radiated Spurious Emission was measured with Alkaline Batteries, and the 53936 MOC4600i AC Power Supply. The worst case spurious emission was observed when using the AC power supply, and the results are displayed in the graphs below. EXHIBIT 6E FCC ID: AZ489FT4868 EXHIBIT 6E1 Motorola Inc. Motorola On Call AC 464.5 MHz0.75 Watts Frequency (MHz) FCC Maximum Limit 12.5kHz Chan. Spacing FCC Maximum Limit -20(dBm) 12.5 kHz Chan. Spacing Horizontal Measured Emission Equiv. Pwr Into Ideal Dipole (dBm) Vertical Measured Emission Equiv Pwr Into Ideal Dipole (dBm) 929.0000 -20-20** 1393.5000-20-20-41.82-37.11 1858.0000-20-20-34.49-32.93 2322.5000-20-20** 2787.0000-20-20** 3251.5000-20-20** 3716.0000-20-20*-35.95 4180.5000-20-20*-37.05 4645.0000-20-20*-40.29 Motorola On Call AC PWR 467.925 MHz0.75 Watts Frequency (MHz) FCC Maximum Limit 12.5kHz Chan. Spacing FCC Maximum Limit -20(dBm) 12.5 kHz Chan. Spacing Horizontal Measured Emission Equiv. Pwr Into Ideal Dipole (dBm) Vertical Measured Emission Equiv Pwr Into Ideal Dipole (dBm) 935.8500 -20-20-61.80* 1403.7750-20-20-43.24-39.26 1871.7000-20-20-33.82-31.57 2339.6250-20-20** 2807.5500-20-20-38.75-41.83 3275.4750-20-20*-39.14 3743.4000-20-20*-34.19 4211.3250-20-20-31.93-36.02 4679.2500-20-20** * Indicates the spurious emission could not be detected due to noise limitations or ambients. The data presented here was taken using the substitution method as found in the TIA/EIA-603 document. Motorola Plantation EMC Lab – Test Performed by: Constantin Belean FCC Re gistration: 91932 / Industry Canada: IC3679 FCC ID:AZ489FT4868 Transmitter Radiated Spurious Emissions: Transmitter Radiated Spurious Emissions: May 13, 2004 Channel Spacing 12.5kHz | S/N 158ABC0005 Channel Spacing 12.5kHz | S/N 158ABC0005 Radiated Spurious Emissions -70 -60 -50 -40 -30 -20 -10 0 929.00001393.50001858.00002322.50002787.00003251.50003716.00004180.50004645.0000 Frequency (MHz) Emission Level dBm Horizontal Measured Emission Equiv. Pwr Into Ideal Dipole (dBm) Vertical Measured Emission Equiv Pwr Into Ideal Dipole (dBm) FCC Maximum Limit 12.5kHz Chan. Spacing FCC Maximum Limit -20(dBm) 12.5 kHz Chan. Spacing Radiated Spurious Emissions -70 -60 -50 -40 -30 -20 -10 0 935.85001403.77501871.70002339.62502807.55003275.47503743.40004211.32504679.2500 Frequency (MHz) Emission Leve…

Text truncated - open the document above for the full version.