AZ489FT4876PORTABLE DIGITAL 2-WAY RADIO

English Product Safety and RF Energy Exposure Booklet for Portable Two-Way Radios The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE USAGE. FOR RADIOS THAT HAVE BEEN APPROVED AS INTRINSICALLY SAFE, READ THE INSTRUCTIONS AND INFORMATION ON INTRINSIC SAFETY ON PAGE 10 OF THIS BOOKLET. ! C a u t i o n © Motorola, Inc. 2003 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 Printed in U.S.A. 7/04. 68P81095C98 68P81095C98-C 2 English RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 3 English Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission (FCC) Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable two-way radios before they can be marketed in the U.S. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. NOTE:The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard, 2003 • ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limitation of exposure to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to resolution # 303 from July 2, 2002" RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. Guidelines: • Do not remove the RF Exposure Label from the device. • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are …

Text truncated - open the document above for the full version.

XPR 6300/6350/6500/6550 Digital Portable RadioQuick Reference Card Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed wit h your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. Write your radio’s programmed features on the dotted lines. Select a Zone Using the MenuSelect a ChannelMethod 1: Using the Select KnobAfter selecting the desired zone, turn the 16-position Select Knob to the desired channel.Method 2: Using the MenuSend an Emergency Alarm Send Silent Emergency AlarmAnswer a Phone CallSend a Phone Call Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. !  16-Position Select Knob Display Top Button _ _ _ _ _ _ _ 3-Position Home button Menu Button Keypad Top Side Button _ _ _ _ _ _ _On/Off/Volume Knob Side Button 1 _ _ _ _ _ _ _Side Button 2 _ _ _ _ _ _ _ PTT Button Speaker 1 Press U until 2 Press D , E , or F directly below ZONE . 3 Press U until the zone you desire is shown OR Use the keypad directly to dial the zone number. 4 Press h to confirm, or press PTT to transmit. 1 Press U until 2 Press D , E , or F directly below CHAN . 3 Press U until channel you desire is shown 4 Press h to confirm, or press PTT to transmit. 1 Radio on and press Emergency button. You see red LED; you hear short, medium-pitched tone. 2 Display shows . 3 When acknowledgment is received, you hear four tones;alarm ends;radio exits emergency. ZONECHAN EMERGENCY 1 Radio on and press Emergency button. You see no LED; you hear no tone. 2 Press PTT . 3 Alarm continues until you exit by:• Press and hold Emergency button for one second. OR•Press PTT again. 1 Phone-like ringing, LED flashes GREEN, PHONE CALL and m are displayed. 2 Press Call Response button. 3 Press PTT button to talk; release to listen. 4 Press h to hang up. 1 Press U until 2 Press D , E , or F directly below PHON . 3 Press U or V to scroll to phone number. 4 Press PTT (or Quick Access button, if programmed) to talk, release to listen. PHON Display Status Symbols Menu Entries (Use With Menu Navigation)*Available at a future date. Call Received . Receiving an individual callView/Program Mode . The radio is in the view or program mode; On Steady = view mode; Flashing = program mode s Received Signal Strength Indication (RSSI) . Received signal strength for the current site (trunking only). The more stripes in the symbol, the stronger the signal. b Battery• Conventional = Flashes when the battery is low. • Smart = The number of bars (0-3) shown indicates the charge remaining in your battery. Note: Smart battery will be available at a future date. r Talkaround . You are talking directly to another radio or through a repeater; On = direct; Off = repeater C Monitor (Carrier Squelch) . This channel is being monitored. T Scan. The radio is scanning a scan list m pp Entry Menu Selection Page BATT *Smart Battery 17 CALL Private Call 58 CHAN Select a Channel 25 CLCK Edit Time and Date 68 DIR Repeater/Direct 64 MUTE Keypad Mute 35 NAME Text Select 47 NUM Number Select 45 PAGE Call Alert Page 60 Entry Menu Selection Page PHON Phone 53 PROG Editing 45 PSWD Password 34 PWR TX Power Level 31 RPGM Reprogram Request 76 SCAN Scan On/Off 49 SITE Site Lock 80 TGRP Talkgroup Call 63 VIEW Viewing a List 43 ZONE Select a Zone 24 Menu Navigation U to find Menu Entry D , or E , or F directly below Menu Entry to select h to exit V or U to scroll through sub-list D , or E , or F directly below Menu Entry to select XPR 6300/6350/6500/6550 Digital Portable Radio User Guide 6816821H01 MOTOROLA, the Stylized Logo and CommPort are registered in the U.S. Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006. All Rights Reserved. iii Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: http://www.motorola.com/governmentandenterprise Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse- engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. !  iv Documentation Copyrights No duplication or distribution of this document or any portion thereof shall take place without the …

Text truncated - open the document above for the full version.

FCC ID: AZ489FT4876 EXHIBIT 13B SHEET 1 REQUEST FOR CONFIDENTIALITY 10 th May 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: Confidentiaity Request for Transmitter with FCC ID: AZ489FT4876; MOTOTRBO UHF Range 1(403 – 470 MHz), 1 – 4.8 Watts. Dear Sir / Madam, Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos) and Exhibit 9, (Internal Photos) as Temporary or Short-Term Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” and Exhibit 3 (External Photos) and 9 (Internal Photos) as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/Mike Ramnath(signed) Mike Ramnath Manager, Regulatory Compliance Email: [email protected]

Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 1 OF 7 EXHIBIT 3 EXTERNAL PHOTOGRAPHS - Pursuant to 47 CFR 2.1033(c) 12 FIGURE 3-1: FRONT VIEW OF MOTOTRBO - FULL DISPLAY AND KEYPAD MODEL Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 2 OF 7 FIGURE 3-2: FRONT VIEW OF MOTOTRBO - PLAIN MODEL Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 3 OF 7 FIGURE 3- 3: BACK VIEW OF MOTOTRBO Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 4 OF 7 FIGURE 3-4: RIGHT SIDE (PTT) OF THE MOTOTRBO Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 5 OF 7 FIGURE 3-5: LEFT SIDE OF THE MOTOTRBO Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 6 OF 7 FIGURE 3-6: FCC AND SAFETY LABELS LOCATION OF MOTOTRBO Safety Label Location FCC Label Location Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 7 OF 7 FIGURE 3-7: CLOSE UP VIEW OF THE SAFETY LABEL.

Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 3 SHEET 6 OF 7 FIGURE 3-6: FCC AND SAFETY LABELS LOCATION OF MOTOTRBO Safety Label Location FCC Label Location

Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 1 SHEET 1 OF 1 EXHIBIT 1 IDENTIFICATION LABEL - Pursuant to 47 CFR 2.925(a) & 2.1033(c) (11) EXHIBIT 1A - LABEL LOCATION A nameplate of the type presented below will be affixed to every transmitter. It will be placed on the bottom of the unit near the front. Shown below is a photo of the actual label affixed to the cast chassis of the transmitter. EXHIBIT 1B - LABEL TYPE The label is a paper polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/inch. Figure 1-1: FCC Label EXHIBIT 1C - GENERAL INFORMATION 1. Application References: TIA/EIA-603B Land Mobile FM or PM Communications Equipment Measurement and Performance Standards Code of Federal Regulations Title 47, Part 2, Sec. 2.1033-2.1057 and Part 90, Section 90.210 2. Data Submittal Procedure: Data is supplied in accordance with Part 2, Sub-part J of the Commission’s rules. The intended use of this transceiver includes applications covered in the Code of Federal Regulations Title 47 and Part 90. Maximum transmitter power shall not be adjustable by the user. 3. Applicable Reference • Reference Certification FCC ID: AZ489FT4876 • EIA/TIA-603 Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. • FCC Federal Regulations Part 47 Sec. 2.1033-2.1057 • FCC Federal Regulations Part 90 Sec.90.210

Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 1 OF 7 EXHIBIT 9 INTERNAL PHOTOGRAPHS – PURSUANT 47 CFR 2.1033 ( C) 12 FIGURE 3- 1: MOTOTRBO COMPLETE INTERNAL OPEN UP VIEW. Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 2 OF 7 FIGURE 3- 2: MOTOTRBO WITH OPTION BOARD. Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 3 OF 7 FIGURE 3-3: MOTOTRBO WITH LCD AND METAL BRACKET DETACHED. Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 4 OF 7 FIGURE 3-4: MOTOTRBO CHASIS, BOARD AND CLIP – SHIELD. Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 5 OF 7 FIGURE 3-5: MOTOTRBO BOARD WITH CLIP-SHIELD DETACHED. Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 6 OF 7 FIGURE 3-6: MOTOTRBO BOTTOM VIEW BOARD WITHOUT GPS. FIGURE 3-7: MOTOTRBO BOTTTOM VIEW BOARD WITH GPS. Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 9 SHEET 7 OF 7 FIGURE 3-8: MOTOTRBO BOARD TOP VIEW.

FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 1 of 41 Certificate Number: 1449-01 FCC ID: AZ489FT4876 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 1 of 2 Networks & Enterprise EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: 5/10/06 Report Revision: Rev O Report ID: FCC rpt_ AAH55QDH9LA1AN_060510_SR3889 Responsible Engineer: Stephen C. Whalen (Sr. Staff Eng.) Date/s Tested: 4/28/2006 – 5/5/2006 Manufacturer/Location: Motorola – Penang Sector/Group/Div.: NE/GTDG Date submitted for test: 4/12/06 DUT Description: 403-470MHz / 4Watt keypad/Display W/GPS Test TX mode(s): CW Max. Power output: 4.8W Nominal Power: 4W Tx Frequency Bands: 403-470MHz Signaling type: FM Model(s) Tested: AAH55QDH9LA1AN Model(s) Certified: AAH55QDH9LA1AN Serial Number(s): 037T000015, 037T000014 Classification: Occupational/Controlled Rule Part(s): 90 Approved Accessories: Antenna(s): PMAE4018A (403-433 MHz, ¼ wave, Dual Band Folded Monopole (GPS) 2.2dBi), PMAE4021A (403-433MHz, ¼ wave, Dual Band Dual Element Stubby (GPS) 1.8dBi), PMAE4022A (403-470MHz, ¼ wave, Whip antenna, 2dBi), PMAE4023A (430-470MHz, ¼ wave, Dual Band Dual Element Stubby (GPS) 1.8dBi), PMAE4024A (430-470 MHz, ¼ wave, Dual Band Folded Monopole (GPS) 2.2dBi) Battery(ies): PMNN4065A (NiMH 1300 mAH), PMNN4066A (Li-Ion 1500 mAH Impres), PMNN4069A (Li-Ion 1500 mAH Impres FM) Body worn accessory(ies): PMLN4651A (Belt Clip 2), PMLN4652A (Belt Clip 2.5), HLN9985B (Waterproof Bag), RLN4570A (Break-A-Way Chest Pack), RLN4815A (Universal RadioPak & Utility Case), HLN6602A (Chest Pack) Audio/Data cable accessory(ies): See section 3.0 for list of approved audio acc Max. Calc. 1-g/10-g Avg. SAR: 6.61/4.72 W/kg (Body) Max. Calc. 1-g/10-g Avg. SAR: 4.82/3.50 W/kg (Face) Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. This reporting format is consistent with the test report guidelines of the TIA TSB-150 December 2004 The results and statements contained in this report pertain only to the device(s) evaluated. Signature on file Ken Enger N&E EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 5/10/06 Certification Date: 5/10/06 Certification No.: L1060509P FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 2 of 41 Part 1 of 2 1.0 Introduction and Overview...................................................................................... 3 2.0 Referenced Standards and Guidelines ..................................................................... 3 2.1 SAR Limits ................................................................................................... 4 3.0 Description of Device Under Test (DUT) ............................................................... 4 4.0 Description of Test System ..................................................................................... 5 4.1 Description of Robotics/Probes/Readout Electronics ................................... 5 4.2 Description of Phantom(s) ............................................................................ 5 4.2.1 Flat Phantom................................................................................... 5 4.2.2 SAM Phantom ................................................................................ 6 4.3 Description of Equivalent Tissues ................................................................ 6 5.0 Additional Test Equipment...................................................................................... 7 6.0 SAR Measurement System Verification.................................................................. 7 6.1 Equivalent Tissue Test results ...................................................................... 8 6.2 System Check Test results ............................................................................ 8 7.0 DUT Test Strategy and Methodology ..................................................................... 8 7.1 DUT Configuration(s) .................................................................................. 8 7.2 Device Positioning Procedures ..................................................................... 9 7.2.1 Body ............................................................................................. 10 7.2.2 Head ............................................................................................. 10 7.2.3 Face .............................................................................................. 10 8.0 Environmental Test Conditions ............................................................................. 10 9.0 Test Results Summary ........................................................................................... 10 9.1 Highest SAR results calculation methodology ........................................... 14 10.0 Conclusion............................................................................................................. 14 APPENDICES A Measurement Uncertainty ..................................................................................... 15 B Probe Calibration Certificates ............................................................................... 18 C Dipole Calibration Certificates.............................................................................. 29 Part 2 of 2 D Test System Verification Scans ............................................................................... 2 E DUT Scans (Shortened scans & Highest SAR Configurations)............................ 18 F DUT Supplementary Data (e.g. Power Slump) ..................................................... 23 G DUT Tested Position Photos ..........…

Text truncated - open the document above for the full version.

FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 1 of 32 Certificate Number: 1449-01 FCC ID: AZ489FT4876 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 2 of 2 Networks & Enterprise EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: 5/10/06 Report Revision: Rev O Report ID: FCC rpt_ AAH55QDH9LA1AN_060510_SR3889 Responsible Engineer: Stephen C. Whalen (Sr. Staff Eng.) Date/s Tested: 4/28/2006 – 5/5/2006 Manufacturer/Location: Motorola – Penang Sector/Group/Div.: NE/GTDG Date submitted for test: 4/12/06 DUT Description: 403-470MHz / 4Watt keypad/Display W/GPS Test TX mode(s): CW Max. Power output: 4.8W Nominal Power: 4W Tx Frequency Bands: 403-470MHz Signaling type: FM Model(s) Tested: AAH55QDH9LA1AN Model(s) Certified: AAH55QDH9LA1AN Serial Number(s): 037T000015, 037T000014 Classification: Occupational/Controlled Rule Part(s): 90 Approved Accessories: Antenna(s): PMAE4018A (403-433 MHz, ¼ wave, Dual Band Folded Monopole (GPS) 2.2dBi), PMAE4021A (403-433MHz, ¼ wave, Dual Band Dual Element Stubby (GPS) 1.8dBi), PMAE4022A (403-470MHz, ¼ wave, Whip antenna, 2dBi), PMAE4023A (430-470MHz, ¼ wave, Dual Band Dual Element Stubby (GPS) 1.8dBi), PMAE4024A (430-470 MHz, ¼ wave, Dual Band Folded Monopole (GPS) 2.2dBi) Battery(ies): PMNN4065A (NiMH 1300 mAH), PMNN4066A (Li-Ion 1500 mAH Impres), PMNN4069A (Li-Ion 1500 mAH Impres FM) Body worn accessory(ies): PMLN4651A (Belt Clip 2), PMLN4652A (Belt Clip 2.5), HLN9985B (Waterproof Bag), RLN4570A (Break-A-Way Chest Pack), RLN4815A (Universal RadioPak & Utility Case), HLN6602A (Chest Pack) Audio/Data cable accessory(ies): See section 3.0 for list of approved audio acc Max. Calc. 1-g/10-g Avg. SAR: 6.61/4.72 W/kg (Body) Max. Calc. 1-g/10-g Avg. SAR: 4.82/3.50 W/kg (Face) Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. This reporting format is consistent with the test report guidelines of the TIA TSB-150 December 2004 The results and statements contained in this report pertain only to the device(s) evaluated. Signature on file Ken Enger N&E EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 5/10/06 Certification Date: 5/10/06 Certification No.: L1060509P FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 2 of 32 Appendix D Test System Verification Scans Note: Dipole validation scans at the head from SPEAG are provided in APPENDIX D. The N&E EME lab validated the dipole to the applicable IEEE system performance targets. Within the same day system validation was performed using FCC body tissue parameters to generate the system performance target values for body at the applicable frequency. The results of the N&E EME system performance validation are provided herein. To assess the isotropic characteristics of the measurement probe, two system performance zoom scans (0 and 90 degrees) were measured. The results were averaged together and adjusted to account for the power drift in order to obtain the final calculated 1 and 10 gram results. FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 3 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 4 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 5 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 6 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 7 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 8 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 9 of 32 Motorola N&E EME Lab FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 10 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 11 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 12 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 13 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 14 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 15 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 16 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 17 of 32 FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 18 of 32 Appendix E DUT Scans (Shortened scans & Highest SAR configurations) FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 19 of 32 Shortened Scan Results Motorola N&E EME Laboratory Comments: Short Scan at the body w/ body worn accessory against phantom Shortened scan reflect highest SAR producing configuration at the body; Run time 7 minutes. Representative “normal” scan run time was 24 minutes “Shortened” scan max calculated SAR using SAR drift: 1-g Avg. = 6.61mW/g; 10-g Avg. = 4.72mW/g “Normal” scan max calculated SAR using SAR drift: 1-g Avg. = 6.53mW/g; 10-g Avg. = 4.68mW/g (see section 9.0 run # CM-Ab-060503-13) FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 20 of 32 Motorola N&E EME Laboratory Comments: Short Scan at the face with 2.5cm separation Shortened scan reflect highest SAR producing configuration at the face; Run time 7 minutes. Representative “normal” scan run time was 26 minutes “Shortened” scan max calculated SAR using SAR drift: 1-g Avg. = 4.54mW/g; 10-g Avg. = 3.33mW/g “Normal” scan max calculated SAR using SAR drift: 1-g Avg. = 4.82mW/g; 10-g Avg. = 3.50mW/g (see section 9.0 run # JsT-Face-060503-02) FCC ID: AZ489FT4876 SR3889 N&E EME Form-SAR-Rpt-Rev. 5.00 Page 21 of 32 Highest SAR Configurations Results Motorola N&E EME Laboratory FCC ID: AZ489FT4876 SR3889 N&E EME F…

Text truncated - open the document above for the full version.

Applicant: Motorola Inc. FCC ID: AZ489FT4876 EXHIBIT 6 SHEET 1 OF 48 EXHIBIT 6 INDEX OF SUBMITTED MEASURED DATA This exhibit contains the measured data for this equipment as follows: EXHIBIT 6A – RF Power Output (1 Table) EXHIBIT 6B – Audio Frequency Response (2 Graphs) 6B-1: 12.5 kHz Channel Spacing 6B-2: 25 kHz Channel Spacing EXHIBIT 6C – Audio Low Pass Filter Response (2 Graphs) 6C-1: 12.5 kHz Channel Spacing 6C-2: 25 kHz Channel Spacing EXHIBIT 6D – Modulation Limiting (6 Graphs) 6D-1: 12.5 kHz Channel Spacing, Carrier Squelch (CSQ) Mode 6D-2: 12.5 kHz Channel Spacing, Tone Private Line (TPL) Mode 6D-3: 12.5 kHz Channel Spacing, Digital Private Line (DPL) Mode 6D-4: 25 kHz Channel Spacing, Carrier Squelch (CSQ) Mode 6D-5: 25 kHz Channel Spacing, Tone Private Line (TPL) Mode 6D-6: 25 kHz Channel Spacing, Digital Private Line (DPL) Mode EXHIBIT 6E – Occupied Bandwidth (8 Spectrum Analyzer Plots) 6E-1: 12.5 kHz Channel Spacing, 2500 Hz Audio Modulation Only 6E-2: 12.5 kHz Channel Spacing, 2500 Hz Audio and PL Tone Modulation 6E-3: 12.5 kHz Channel Spacing, 2500 Hz Audio and DPL Tone Modulation 6E-4: 12.5 kHz Channel Spacing, DTMF Modulation Only 6E-5:…

Text truncated - open the document above for the full version.