AZ489FT5828i830

Motorola iDEN Digital Multi-service Data-capable Phone i 830 Phone User’s Guide DRA FT @NNTN5429A@NNTN5429A IMPORTANT NOTICE: PLEASE READPRIOR TO USING YOUR PHONEThe SIM card provided in this kit is intended for use withthe phone provided in this package.Loss of certain features will result when using a SIMcard from one of the following models: i 30 sx , i 35 s , i 50 sx , i 55 sr , i 58 sx , i 60 c , i 80 s , i 85 s , i 88 s , i 90 c , i 95 cl series, and the i 2000 series. For more information on SIM card compatibility, go towww.motorola.com/iden/support. i ContentsGetting Started........................................... 1 Locating Your SIM Card ....................................3Battery ...............................................................3Activating Service ..............................................7Powering On and Off.........................................7Enabling Over-the-Air Security..........................8Finding Your Phone Number.............................8Phone Basics ....................................................9SIM Card Security ...........................................13Accessories .....................................................17For More Information .......................................17 Making Calls ............................................. 18 Phone Calls .....................................................18Private Calls ....................................................18Receiving Calls................................................19Ways to Enter Calls.........................................19Missed Phone Calls.........................................22Using Speakerphone .......................................22Using Mute ......................................................23 Making Emergency Phone Calls .....................23 Call Alerts..................................................24 Sending Call Alerts..........................................24Receiving Call Alerts .......................................24Using the Call Alert Queue..............................24 Recent Calls ..............................................26 Storing Recent Calls to Contacts ....................26Deleting Recent Calls......................................27 Contacts ....................................................28 Viewing Contacts ............................................29Creating Entries ..............................................30Storing Numbers Faster ..................................31Editing Entries .................................................32Deleting Entries ...............................................32Checking Capacity ..........................................32Creating Pauses and Waits.............................32International Numbers .....................................33Accessing Contacts with GSM Phones ...........34 Call Forwarding ........................................35 Forwarding All Calls ........................................35 ii Turning Off Call Forwarding ............................36Forwarding Missed Calls .................................36Viewing Call Forwarding Settings....................37 Advanced Calling Features..................... 38 Call Waiting .....................................................38Switching Between Calls .................................38Putting a Call on Hold......................................39Calling 2 People ..............................................39Creating Pauses and Waits While Dialing.......40Making International Calls ...............................40Setting One Touch PTT...................................40Setting Flip Actions..........................................41Group Calls .....................................................41Call Timers ......................................................42Using Your Phone as a Modem ......................43Making TTY Calls ............................................44 Memo ........................................................ 47Ring Tones ............................................... 48 Setting Your Phone to Vibrate .........................48Ring and Vibrate..............................................49 Assigning Ring Tones to Contacts ..................49Viewing Ring Tone Assignments ....................49Downloading More Ring Tones .......................49Managing Memory ..........................................50Deleting Custom Ring Tones ..........................50 Entering Text ............................................51 Using Alpha Mode ...........................................51Using Word Mode ...........................................51Special Function Keys.....................................52Using Numeric Mode.......................................53Using Symbols Mode ......................................53 Your Messaging Services ........................54 Voice Mail........................................................54Text Messages ................................................54 Receiving Messages ................................56 Message Notifications .....................................56Message Center ..............................................57 Voice Mail Messages................................58 Receiving a Message ......................................58Accessing Voice Mail from iii the Message Center ...................................58 Sending Unanswered Calls to Voice Mail .......58 MOSMS Messages ................................... 59 Setting Up........................................................59Receiving a Message ......................................59Reading from the Message Center .................60Creating and Sending Messages ....................60Sorting Messages............................................63Managing Memory...........................................63 MMS Messages ........................................ 64 Navigating the Inbox, Drafts, and Sent Items..64Creating and Sending Messages .....…

Text truncated - open the document above for the full version.

73 Drafts The non-musical ring tones in the list of ring toneswhen you receive your phone cannot be includedin a message.1 While you are creating a message, selectAttach . 2 Select New Attachment . 3 Select Ring Tones . A list of ring tones that can be included in amessage appears. 4 Select the ring tone you want to attach.Tip: To hear a ring tone before attaching it, highlight the ring tone. Voi ce Record sYou can attach voice records from your list of voicerecords.Voice records created by recording a phone callcannot be including in a message.1 While you are creating a message, selectAttach . 2 Select New Attachment . 3 Select Vo i c eR e c . A list of voice records that can be included in amessage appears. 4 Selectthevoicerecordyouwanttoattach. Tip: To hear a voice record before attaching it, highlight the voice record and press A under Play . Removing an AttachmentTo remove an attachment in a message you arecreating:1 While you are creating a message, selectAttach . 2 Scroll to the attachment you want to remove. 3 Press m . 4 Select Unattach . DraftsWhenyouarecreatingamessage,youcansaveitin Drafts any time before you send it.You can view, edit, send, or delete saved drafts.Saving a Message in Drafts1 While you are creating a message, press m . 2 Select Save In Drafts . You can continue to create the message. Theversion you saved in Drafts will not change. 74 MMS MessagesSending a Draft1 From the main menu, select Messages > Drafts . 2 Scroll to the draft you want to send. 3 Press m . 4 Select Send . Editing a Draft1 From the main menu, select Messages > Drafts . 2 Selectthedraftyouwanttoedit. 3 Continue as you would when creating amessage. DeletingWhenyousendadraft,itisdeletedfromDrafts.To delete a message in Drafts without sending it:1 Scroll to the message you want to delete. 2 Press m . 3 Select Delete Message . 4 Press O or press A under Yes to confirm. Drafts IconsSent ItemsMessages you have sent or tried to send arestored in Sent Items.Forwarding Sent Items1 From the main menu, select Messages > Sent Items . 2 Scroll to the message you want to forward. 3 Press m . 4 Select Forward . 5 Create and send your message. ResendingIf a message was not successfully sent, you canresend it.1 From the main menu, select Messages > Sent Items . M Draft. w High priority. L Attachment. y High priority with an attachment. 75 Receiving a Message 2 Scroll to the message you want to resend. 3 Press A under Resend . Note: If your message was sent successfully, Resend will not appear as an option. Checking Delivery StatusIf a message was successfully sent and you set themessagetogiveareportconfirmingdelivery,youcan check the delivery status:1 From the main menu, select Messages > Sent Items . 2 Scroll to the message you want to view. 3 Press m . 4 Select Delivery Status . Deleting1 Scroll to the message you want to delete. -or- View the message you want to delete. 2 Press m . 3 Select Delete Message . 4 Press O or press A under Yes to confirm. Sent Items IconsReceiving a MessageWhen you receive an MMS message, a messagenotification appears on the display.To view the message:1 Press O or press A under the display option on the left.The message is downloaded from the messageserver. 2 Ifthemessagefillsmorethanonescreen,scrollto read it. t Successfully sent. v Unsuccessfully sent. w High priority. L Attachment. z High priority and locked. y High priority with an attachment. 76 MMS MessagesTo dismiss the message notification: If the flip is closed, press . . -or- If the flip is open, press A under the display option on the right or close the flip.This icon w appears on the display, reminding you that you have a new message. Navigating a MessageAs you scroll through a message, numbers, emailaddresses, and website URLs are highlighted.Pictures and audio recordings are also highlighted.Embedded Objects and AttachmentsMessages may contain pictures or audiorecordings as part of the body of the message oras attachments.If a message contains pictures or audio recordingsin the body of the message, highlight each pictureor audio recording to view or play it.If a message contains a picture or audio recordingas an attachment, open the attachment to view thepicture or play the audio recording. Note: Audio recordings in messages do not playif VibeAll is set to On . Opening AttachmentsTo open an attachment.1 View the message. 2 Highlight the attachment you want to open.Attachments appear at the end of a message. 3 Press O . Note: Attachments that are of an unknown typecannot be opened, but they can bedeleted. See “Deleting Attachments” onpage 80. Viewing Received Messagesfrom the Message Center1 From the main menu, select Messages > Inbox . 2 Selectthemessageyouwanttoread.Ifyouhavenotviewedthemessagebefore,themessage is downloaded from the messageserver. 3 Ifthemessagefillsmorethanonescreen,scrollto read it. 77 Actions for Received Messages Inbox Icons Actions for ReceivedMessagesDeletingUnread Messages1 Scroll to the message you want to delete. 2 Press A under Delete . 3 Press O or press A under Yes to confirm. Read Messages1 Scroll to the message you want to delete. -or- View the message you want to delete. 2 Press m . 3 Select Delete Message . 4 Press O or press A under Yes to confirm. ReplyingSee “Replying to a Message” on page 68.Forwarding1 View the message you want to forward. -or- If you have already viewed the message, scrollto it. 2 Press m . u Unread message. T Read message. r Reply sent. N Forwarded. O Locked. w High priority. L Attachment. x Locked, with an attachment. z High priority and locked. y High priority with an attachment. { High priority and locked, with an attachment. 78 MMS Messages3 Select Forward . 4 Create and send your message. Embedded objects and attachments are includedwhen you forward a message. Locking and UnlockingWhen you lock a message, it cannot be deleteduntil you unlock it.1 View the message you want to lock or unlock.-or-If you have already viewed the message, scrollto it. 2 Pr…

Text truncated - open the document above for the full version.

Applicant: Motorola Inc FCC ID: AZ489FT5828 iDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322 www.mot.com/iDEN Page: 13- 1 19 th February 2004 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of transmitter with FCC ID: AZ489FT5828. Gentlemen; Motorola Inc., 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322, herein submits its application for Certification of the transmitter with FCC ID: AZ489FT5828. This variable output power (0.050 to 700 milliwatt) transmitter is part of a handheld transceiver used in a SMR and EA SMR trunking system operating in the United States 806-821/851- 866MHz and 896-901/935-940 MHz frequency band. Certification is sought for this transceiver, and performance data is provided for that purpose. This transceiver is of the receive-first type described in International Telecommunications Union Recommendation ITU-R M.1221 entitled Technical And Operational Requirements For Cellular Multimode Mobile Radio Stations. It must first find, acquire and lock onto a control channel from a predefined set of control channel frequencies assigned to a companion Authorized base station (e.g. – FCC ID: ABZ89FC5792). Transmission is not possible until lock to a base station control channel has been achieved, then transmission is limited to digitally modulated service request bursts on the reverse control channel. Upon recognition of a proper request, the control channel base station transmitter will then assign the transceiver a traffic channel for transmission of digital voice or circuit-switched data from the set of frequencies for which the trunking system is licensed. Attached Exhibit 12.1 provides additional descriptive details. It is expected that this handheld time division multiplexed transceiver marketed in the United States will also be used for itinerant operation with companion Authorized Base Stations by users requesting trunked radio and telephone interconnect service while roaming outside the United States. In some countries the companion base stations are licensed to operate at frequencies in the 821-825/866-870 MHz band in addition to some of those in the 806-821/851-866 MHz band normally used in United States SMR systems. Consequently, this transmitter has been designed to meet FCC requirements for operation in the 806-821 MHz band over the more global band of 806 - 825 MHz when used with a companion Authorized Base Station. Thus, performance data is provided to substantiate FCC compliant operation with a Companion Base Station over the broader 806 to 825 MHz band expected for global use of this handheld transceiver. To facilitate global roaming it is kindly requested that a note be provided in the Grant for Equipment Authorization, which states that this ‘receive first’ type of equipment is Applicant: Motorola Inc FCC ID: AZ489FT5828 iDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322 www.mot.com/iDEN Page: 13- 2 compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. This will aid equipment authorization in foreign countries, which accept a United States FCC Grant for Equipment Authorization, yet not jeopardize United States public safety or cellular systems licensed to operate in the 821- 825 MHz frequency band since no compatible base station may be authorized on those frequencies in the United States. It is also expected that this transceiver type will be marketed outside the United States and brought into the United States for itinerant “roaming” operation on compatible 806 - 821 MHz base stations located within the United States. Consequently, upon receipt of Authorization, only those units of this equipment type authorized for marketing in countries outside the United States will also bear a label with the specified FCC identifier. In accordance with 47 CFR 2.1093(c) this transmitter may be used in “covered” SMR service so it has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1093(d)(2). The subject transmitter complies with 47 CFR 90.203 of the rules in that the operator cannot directly program transmit frequencies using only the unit's normally accessible external controls. This transceiver can function as a Part 15.3(r) computer peripheral device when functioning as an RF modem when connected to a computer via a data cable (ref: Exhibit 12.1). For this reason a Declaration of Conformity has been prepared and is provided on Page 5 of the user Manual in the Exhibit 8. Enclosed is a complete Certification Application comprised of 12 Exhibits. Contact me at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Email: [email protected]

______________________________________________________________________________ 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. Confidentiality Request Date: 19th February 2004 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT5828. Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13b

FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 1 Exhibit 3. External Photographs -- Pursuant to 47 CFR 2.1033(c) 12 The radio product shapes, colors and housing/bezel vary. Photograph 3-1: Front view, antenna retracted. Photograph 3-2: Back view, antenna retracted, battery cover attached. FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 2 Photograph 3-3: Front view, antenna extended. Photograph 3-4: Front view, antenna extended. FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 3 Photograph 3-5: Button side view, antenna retracted. Photograph 3-6: Antenna side view, antenna retracted. FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 4 Photograph 3-7: Button side view, antenna extended. Photograph 3-8: Antenna side view, antenna extended. FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 5 Photograph 3.9: Location of label on back of unit’s housing (battery cover removed). Photograph 3.10: Zoom view of labels containing FCC ID and FCC Logo. FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 6 Photograph 3.11: Back of unit’s housing (battery cover placed). Photograph 3.12: Front view of unit.

FCC Filing Package for Motorola i830Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page 1-2 Exhibit 1. Identification Label -- Pursuant to 47 CFR 2.925, 2.1065 and 2.1033(c) 11 1.1 Location Back side of the radio product unit chassis (Photograph 1.1). 1.2 Type The label is a white polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 5 lbs/in. 1.3 Markings (Text) Enlarged view of label (showing FCC ID and manufacturer type number): Photograph 1.1: Location of label on back of unit’s housing (battery cover removed). FCC Filing Package for Motorola i830Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page 2-2 Photograph 1.2: Zoom view of labels containing FCC ID and FCC Logo Exhibit 1A. General Information 1A.1 Production Plans Quantity production is planned. FCC Filing Package for Motorola i830Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page 2-2 1A.2 Application References -- Pursuant to 47 CFR 2.948 and 2.1061 Reference is made to the following Motorola "Application References" 1. Open Area Test Site “OATS” (FCC Registration: 95517 and 98377 / Industry of Canada: 2056-A) 1A.3 Data Submittal Procedure Data located in Exhibit 6 is supplied in accordance with 47CFR2, Sub-part J and Part 90, Sub-parts I and Sub-part S of the Commission’s rules. 1A.4 Similar, currently Certified Transceiver FCC ID: AZ489FT5824 1A.5 Additional Considerations This radio product also integrates a receiver that will receive and process signals from Global Positioning System satellites. The radio product can also function as a Part 15.3(r) computer peripheral device when functioning as an RF modem when connected to a computer via a data cable accessory (Exhibit 12). A Declaration of Conformity in accordance with 47CFR2.1077(a) is provided in Exhibit 8 as evidence of compliance with Part 15 requirements for these additional Class B digital device functionalities per 47CFR15.101(a). Compliance with Part 15 requirements for the Direct-Conversion (zero IF superheterodyne) receiver has been determined by verification in accordance with 47CFR15.1.

FCC Filing Package for Motorola i830 Transceiver FCC ID: AZ489FT5828 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 9- 1 Exhibit 9. Internal Photographs -- Pursuant to 47 CFR 2.1033(c) 12 Photograph 9-1: Back side view of radio PCB. Photograph 9.3: Front side view of keyboard. Photograph 9-2: Back side view of radio PCB without shields.

CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 1 of 26 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 S.A.R. EME Compliance Test Report Part 1 of 2 Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. Deanna Zakharia signature on file for Ken 2/13/04 ____________________________________________________________ _________________________ Ken Enger Date Approved Senior Resource Manager, Laboratory Director, CGISS EME Lab Note: This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. Date of Report: February 13, 2004 Report Revision: Rev. B Manufacturer: Motorola Product Description: 1:6, 1:3, 81:120, 1:12 TDMA; 64 QAM, 16 QAM & QPSK Modulation; 0.6 W Pulse average FCC ID: AZ489FT5828 Device Model: H74XAH6RR4AN/NUF3783A Certificate Number: 1449-01 Test Period: 1/21/04 - 2/3/04 EME Tech: Ed Church EME Eng.: Stephen Whalen (Sr. EME Eng.) Author: Michael Sailsman Global EME Regulatory Affairs Liaison CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 2 of 26 TABLE OF CONTENTS Part 1 of 2 1.0 Introduction 2.0 Reference Standards and Guidelines 3.0 Description of Test Sample 3.1 Test Signal 3.2 Test Output Power 4.0 Description of Test Equipment 4.1 Description of S.A.R Measurement System 4.2 Description of Phantom 4.2.1 Flat Phantom 4.2.2 SAM phantom 4.3 Simulated Tissue Properties 4.3.1 Type of Simulated Tissue 4.3.2 Simulated Tissue Composition 4.4 Test conditions 5.0 Description of Test Procedure 5.1 Device Test Positions 5.1.1 Body 5.1.2 Head 5.1.3 Face 5.2 Test Position Photographs 5.3 Probe Scan Procedures 6.0 Measurement Uncertainty 7.0 S.A.R. Test Results 7.1 S.A.R. results 7.2 Peak S.A.R. location 7.3 Highest S.A.R. results calculation methodology 8.0 Conclusion Part 2 of 2 Appendix A: Power Slump Data/Shortened scan Appendix B: Data Results Appendix C: Dipole System Performance Check Results Appendix D: Calibration Certificates Appendix E: Illustration of Body-worn Accessories Appendix F: Accessories and options test status and separation distances CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 3 of 26 REVISION HISTORY Date Revision Comments 2/5/04 O Release of Prototype results 2/11/04 A Updated antenna gain information in section 3.0 2/13/04 B Corrected error in antenna gain information in section 3.0; Updated A2LA certification number on cover page CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 4 of 26 1.0 Introduction This report details the utilization, test setup, test equipment, and test results of the Specific Absorption Rate (S.A.R.) measurements performed at the CGISS EME Test Lab for model number H74XAH6RR4AN/NUF3783A, FCC ID: AZ489FT5828. The applicable exposure environment is General Population/Uncontrolled. 2.0 Reference Standards and Guidelines This product is designed to comply with the following national and international standards and guidelines. • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • IEEE 1528, 2003 "Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques" • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Terminal frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003 • ANATEL, Brazil Regulatory Authority, Resolution 256 (April 11, 2001) "additional requirements for SMR, cellular and PCS product certification." CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 5 of 26 3.0 Description of Test Sample FCC ID: AZ489FT5828 is a digital multi-service data capable device that employs time division multiplexing transmission technology with a duty cycle ranging from 16.67% to 33.33% using 16-QAM modulation for voice or circuit data transmission. There is a Split 1:3 mode that operates using a 16.67% transmission duty cycle. Two 7.5ms pulses occur during the six time slots within the 90-msec frame format. This mode is available in both the 806-825MHz and 896-902MHz bands in the telephone interconnect mode only. Packet data transmission is also supported up to a maximum duty cycle of 67.5% using quad QPSK modulation. This device will be marketed to and used by the general population. This device may be used while held against the head in voice mode, in front of the face in PTT mode, and against the body in voice, PTT and data modes. FCC ID: AZ489FT5828 is capable of operating in the 806-825 MHz and 896-902MHz bands. Packet data transmission is not available while transmitting in the 896-902 MHz band. The rated power is 0.6 watts pulsed averaged. The maximum output is 0.7 watts pulsed average as defined by the upper limit of the production line final test station. CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 6 of 26 FCC ID: AZ489FT5828 is offered with the following options and accessories: Antenna Description 8585327F01 Meander Flex ¼ wave antenna; 806-941 MHz; Extended: -1.10 dBd gain (813MHz), 0.3dBd gain (896MHz) Retracted: -3.40 dBd gain (813 MHz), -3.20dBd gain (896MHz) Batteries NNTN4930A 700mAh (5mm) Lithium Ion NNTN5195A 950mAh (8mm) Lithium Ion 1585164F01 Battery cover (5mm) 1585169F02 Battery cover (8mm) Body-worn Accessories NNTN5002A Black Carry Holster NNTN4747A Belt clip Applicable Audio accessories SYN8390B Privacy Earpiece and Mic NNTN4033A Privacy earpiece and Mic…

Text truncated - open the document above for the full version.

CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 1 of 53 CGISS EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 S.A.R. EME Compliance Test Report Part 2 of 2 Note: Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. Deanna Zakharia signature on file for Ken Enger 2/5/04 ____________________________________________________________ _________________________ Ken Enger Date Approved Senior Resource Manager, Laboratory Director, CGISS EME Lab Note: This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. Certificate Number: 1449-02 Date of Report: February 05, 2004 Report Revision: Rev. O Manufacturer: Motorola Product Description: 1:6, 1:3, 81:120, 1:12 TDMA; 64 QAM, 16 QAM & QPSK Modulation; 0.6 W Pulse average FCC ID: AZ489FT5828 Device Model: H74XAH6RR4AN/NUF3783A Test Period: 1/21/04 - 2/3/04 EME Tech: Ed Church EME Eng.: Stephen Whalen (Sr. EME Eng.) Author: Michael Sailsman Global EME Regulatory Affairs Liaison CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 2 of 53 APPENDIX A Power Slump Data/Shortened Scan CGISS EME Form-SAR-Rpt-Rev. 2.00 Page 3 of 53 DUT Power versus time data CGISS EME Form-SAR-Rpt-Re…

Text truncated - open the document above for the full version.