AZ489FT5846iDEN i870 with WiDEN, MOTOtalk, and BT

Motorola iDEN Digital Multi-service Data-capable Phone i 870 Phone User’s Guide DRAFT @NNTN6539A@NNTN6539A IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONEThe SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i 30 sx , i 35 s , i 50 sx , i 55 sr , i 58 s , i 60 c , i 80 s , i 85 s , i 88 s , i 90 c , i 95 cl series, and the i 2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support.Defects or damage to your Motorola phone that result from the use of non-Motorola branded or certified Accessories, including but not limited to replacement housings and or other peripheral accessories, are excluded from warranty coverage. Please refer to the text of Motorola's Limited One Year warranty located in this user’s guide for complete details. i ContentsGetting Started........................................... 1 Locating Your SIM Card ....................................3Battery ...............................................................4Activating Service ..............................................7Powering On and Off.........................................7Phone Programming .........................................8Finding Your Phone Number.............................9Phone Basics ....................................................9Using the Memory Card ..................................14SIM Card Security ...........................................17Antenna ...........................................................22Accessories .....................................................22For More Information .......................................22 Making Calls ............................................. 23 Phone Calls .....................................................23Private Calls ....................................................23Receiving Calls................................................24Choosing a Number to Call .............................25Missed Phone Calls.........................................26 Using Speakerphone.......................................26Using Mute ......................................................27Making Emergency Phone Calls .....................27 MOTOtalk TM .......................................................... 28 Switching to MOTOtalk ...................................28Exiting MOTOtalk ............................................29Channels and Codes.......................................29Private MOTOtalk Calls...................................31Making Emergency Calls while in MOTOtalk TM Mode...........................................................32 Setup Options .................................................32 Call Alerts..................................................34 Sending Call Alerts..........................................34Receiving Call Alerts .......................................34Using the Call Alert Queue..............................34 Recent Calls ..............................................36 Calls and Call Alerts ........................................36My Info From Other Phones ............................36Contact Information From Other Phones ........37Viewing the Recent Calls List..........................37Storing Items to Contacts ................................38 ii Deleting Items .................................................39Making Calls From the Recent Calls List ........39 Contacts ................................................... 41 Accessing Contacts.........................................42Creating Entries...............................................42Storing Numbers Faster ..................................44Editing Entries .................................................45Viewing Entries................................................45Deleting Entries ...............................................47Checking Capacity ..........................................48Creating Pauses and Waits.............................48International Numbers .....................................48Making Calls From Contacts ...........................49Accessing Contacts with GSM Phones ...........49 Call Forwarding........................................ 51 Forwarding All Calls ........................................51Turning Off Call Forwarding ............................52Forwarding Missed Calls .................................52Viewing Call Forwarding Settings....................53 Advanced Calling Features .....................54 Call Waiting .....................................................54Switching Between Calls .................................54Putting a Call on Hold .....................................55Calling 2 People ..............................................55Creating Pauses and Waits While Dialing.......56Making International Calls ...............................56One Touch PTT...............................................56Quick PTT .......................................................57Setting Flip Actions .........................................58Call Timers ......................................................58Using Your Phone as a Modem ......................59Making TTY Calls ............................................60 Group Calls and Selective Dynamic Group Calls .......................................................63 Group Calls .....................................................63Selective Dynamic Group (SDG) Calls ...........65 Memo .........................................................70Ring Tones ................................................71 Setting Your Phone to Vibrate.........................71Ring and Vibrate .............................................72 iii Assigning Ring Tones to Contacts ..................72Viewing Ring Tone Assignments.....................72Downloading More Ring Tones .......................73About DRM Ring Tones ...............…

Text truncated - open the document above for the full version.

96 Videos Sending in Private CallsFor information on sending stored pictures in Private calls, see “Starting a Call by Sending a Picture” on page 115.Assigning to Contacts1 Scroll to or select the picture you want to assign to a Contacts entry. 2 Press m . 3 Select Set As Caller ID . 4 To store the number as a new entry, select [New Contact] . -or- To store the number to an existing entry, select the entry.Only entries that include phone numbers are displayed. This icon g appears next to entries that have pictures assigned. 5 If you selected an entry with a picture assigned, press O or press A under Yes to overwrite the assigned picture. -or- Press A under No to return to the list of entries without overwriting the assigned picture. Setting as Wallpaper1 Scroll to or select the picture you want to set as wallpaper. 2 Press m . 3 Select Set As Wallpaper . Note: If you later set your wallpaper to Auto Cycle , the picture is included and will appear on the idle screen. See “Wallpaper” on page 155. VideosThe media center lets you play videos.PlayingTo play a video, select it from the list of items in the media center.This icon V appears next to each video in the list of items. Tip: When viewing the list of items in the media center, you can scroll left or right, or press * or # , to change the type of media that is displayed in the list. To stop the video before it has finished playing: Press O . -or- Press A under Stop . -or- Scroll left. To restart the video, scroll right. 97 Media CenterAudio RecordingsThe media center lets you play audio recordings and assign them to Contacts entries.PlayingTo play an audio recording, select it from the list of items in the media center.This icon a appears next to each audio recording in the list of items. Tip: When viewing the list of items in the media center, you can scroll left or right, or press * or # , to change the type of media that is displayed in the list. To stop the audio recording before it has finished playing: Press O . -or- Scroll left. To restart the audio recording, scroll right.When you play an audio recording, an animated image appears on the display. Assigning to ContactsTo assign an audio recording in the media center as the ring tone for a Contacts entry:1 Scroll to or select the audio recording you want to assign. 2 Press m . 3 Select Assign As Ringer . 4 Select the Contacts entry you want to assign the ring tone to.Note: You cannot assign a voice record as the ring tone for a Contacts entry. Renaming Items1 Access the media center. 2 Scroll to or select the item you want to rename. 3 Press m . 4 Select Rename . 5 Delete the item’s name and enter a new name. 6 Press O . 98 Locking Items Locking ItemsWhen you lock an item in the media center, it cannot be deleted until you unlock it.1 Access the media center. 2 Scroll to or select the item you want to lock or unlock. 3 Press m . 4 Select Lock to lock the item. -or- Select Unlock to unlock the item. When you view items in the media center, one of these icons appears next to each locked item: Deleting ItemsDeleting items from the media center means they can no longer be accessed anywhere in your phone, including the list of ring tones, the list of voice records, and Contacts. Under certain conditions, some DRM vendors will not charge you if you download an item multiple times within a given time frame. Please contact the DRM vendor to learn more about their download regulations. Deleting an Item1 Scroll to or select the item you want to delete. 2 Press m . 3 Select Delete . 4 Press O or A under Yes to confirm. Deleting All ItemsYou can delete all unlocked items currently in view, depending on how media center filtering is set. See “Filtering by Media Type” on page 93. If filtering is set to show all types of media center items, all unlocked items are deleted.1 Access the media center. 2 Press m . 3 Select Delete All . 4 Press O or A under Yes to confirm. R Locked. c Forward lock and locked. 99 Media CenterAccessing the CameraYou can access the camera from the media center at any time, except when you are viewing a list of audio recordings, playing an audio recording, or using the Setup menu. Select [Camera] from the list of items. -or- Press c . -or- Press A under Camera . Copying and Moving ItemsIf you have the memory card in your phone, you can copy and move items in the media center from your phone’s memory to the memory card or from the memory card to your phone’s memory.1 Access the media center. 2 Scroll to or select the item you want to delete. 3 Press m . 4 To copy the item, select Copy to Phone or Copy to Card . -or- To move the item, select Move to Phone or Move to Card . Some items cannot be copied or moved:• DRM pictures and ring tones cannot be copied. Some DRM pictures and ring tones cannot be moved, depending on their rights settings. • Forward locked pictures and ring tones cannot be copied or moved to the memory card. • Videos over 30 seconds long cannot be copied or moved to your phone’s memory. If you try to copy or move an item that cannot be copied or moved, your phone displays a message telling you that this action cannot be performed. Changing Storage PreferenceWhile you are using the media center, you can choose whether media items are saved to your phone’s memory or to the memory card.1 Access the media center. 2 Press m . 3 Select Memory Card > Store Media . 4 Select On Phone to set your phone to save media items to the phone’s memory. -or- Select Prefer On Card to set your phone to save media items to the memory card, if it is available. If the memory card is not available, media items are saved to your phone’s memory. 100 Accessing the Audio Player The location that you choose becomes the Store Media option in Settings. Accessing the Audio PlayerYour i 870 phone includes an audio player that you can use to play MP3 audio files stored on the memory card inserted in your phone.To access the audio player from the media center:1 Access the media center. 2 To …

Text truncated - open the document above for the full version.

FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 2- 1 Exhibit 2: Statement of Certification -- Pursuant to 47 CFR 2.907 The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications: BEng (Hons) In Electrical and Electronic Engineering, 2004, University of Wales, Swansea NAME: Lee Tuck Wai SIGNATURE: /s/ Lee Tuck Wai (signed) DATE: 08/11/2005 TITLE: Electrical Engineer I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct: NAME: Yip Khai Biau SIGNATURE: /s/ Yip Khai Biau (signed) DATE: 08/11/2005 TITLE: Engineering Manager

Applicant: Motorola Inc FCC ID: AZ489 FT5846 iDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322 www.mot.com/iDEN Page: 13- 1 16 th August 2005 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of transmitter with FCC ID: AZ489FT5846, iDEN i870 Gentlemen; Motorola Inc., 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322, herein submits its application for Certification of the transmitter with FCC ID: AZ489FT5846. This variable output power (0.088 to 640 milliwatt) transmitter is part of a handheld transceiver used in a SMR and EA SMR trunking system operating in the United States 806-821/851- 866MHz and 896-901/935-940 MHz frequency band. It also possesses a transmitter that operates in the ISM band (902 – 928 MHz). The two transmitters are configured so that they can only operate exclusive of each other (i.e. only one mode can operate at a time). The operation mode is selected via the user menu. Certification is also sought for this transceiver, and performance data is provided for that purpose. The first transceiver is of the receive-first type described in International Telecommunications Union Recommendation ITU-R M.1221 entitled Technical And Operational Requirements For Cellular Multimode Mobile Radio Stations. It must first find, acquire and lock onto a control channel from a predefined set of control channel frequencies assigned to a companion Authorized base station (e.g. – FCC ID: ABZ89FC5794). Transmission is not possible until lock to a base station control channel has been achieved, then transmission is limited to digitally modulated service request bursts on the reverse control channel. Upon recognition of a proper request, the control channel base station transmitter will then assign the transceiver a traffic channel for transmission of digital voice or circuit-switched data from the set of frequencies for which the trunking system is licensed. Attached Exhibit 12.1 provides additional descriptive details. To facilitate global roaming it is kindly requested that a note be provided in the Grant for Equipment Authorization, which states that this ‘receive first’ type of equipment is compliant for transmitter operation over the broader range 806-825 MHz when used with a compatible Authorized Base Station. This will aid equipment authorization in foreign countries, which accept a United States FCC Grant for Equipment Authorization, yet not jeopardize United States public safety or cellular systems licensed to operate in the 821- 825 MHz frequency band since no compatible base station may be authorized on those frequencies in the United States. Applicant: Motorola Inc FCC ID: AZ489 FT5846 iDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322 www.mot.com/iDEN Page: 13- 2 It is also expected that this transceiver type will be marketed outside the United States and brought into the United States for itinerant “roaming” operation on compatible 806 - 821 MHz base stations located within the United States. Consequently, upon receipt of Authorization, only those units of this equipment type authorized for marketing in countries outside the United States will also bear a label with the specified FCC identifier. In accordance with 47 CFR 2.1093(c) this transmitter may be used in “covered” SMR service so it has been subjected to routine environmental evaluation for RF exposure and found to be compliant with the limits specified in 47 CFR 2.1093(d)(2). The subject transmitter complies with 47 CFR 90.203 of the rules in that the operator cannot directly program transmit frequencies using only the unit's normally accessible external controls. This transceiver can function as a Part 15.3(r) computer peripheral device when functioning as an RF modem when connected to a computer via a data cable (ref: Exhibit 12.4). For this reason a Declaration of Conformity has been prepared and is provided on Page 11 of the user Manual in the Exhibit 8. The second transceiver is a frequency hopping spread spectrum type, operating in the unlicensed ISM (902-928 MHz) band. It uses an FSK (Frequency Shift Key) modulation, 50 kHz spacing, up to 1 watt. The protocol is defined to have 10 interleaved hopsets of 50 frequencies each with 500 kHz separation between set members. All 10 hopsets span the entire ISM band. In this transceiver mode, conversations are held only via the speakerphone; the earpiece is disabled. This radio product is equipped with a Bluetooth (BT) transceiver. BT supports both voice and data for short range wireless communications. BT Band of Operation is 2.4 - 2.4835 GHz (1 MHz channel bandwidth). It is a class 2 type device, with power rated +4 to –6 dBm (typical 0 dBm). The BT antenna is implemented on the back side, lower corner of the board on the PTT side of the phone. The BT device was tested at TIMCO Engineering Lab at Newberry, FL 32669 and it complies 15.247 (c), 15.205 and 15.209 (b). Enclosed is a complete Certification application comprised of 14 Exhibits. Contact me at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Email: [email protected]

FCC ID: AZ489FT5846 ______________________________________________________________________________ Motorola Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. CONFIDENTIALITY REQUESTED Date: 16 th August 2005 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ489FT5846. Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune-Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos) and Exhibit 9, (Internal Photos) as Temporary Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” And Exhibit 3 and 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13a

FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 1 Exhibit 3: External Photographs -- Pursuant to 47 CFR 2.1033(c) 12 Temporary Confidentiality Requested The radio product shapes, colors and housing/bezel vary. Figure 3-1. Front of i870 radio, flip closed Figure 3-2. Back of i870 radio, flip closed FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 2 Figure 3-3. Front of i870 radio, flip open. Figure 3-4. Back of i870 radio, flip closed. FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 3 Figure 3-8. Side of i870 radio, flip open and antenna Figure 3-9. Side of i870 radio, flip open and extended. antenna extended. Figure 3-10. Button side of i870 radio FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 3 - 4 Figure 3-13. Connector end of i870 radio. Figure 3-14. Battery Compartment of i870 radio.

FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Pag e 1 - 1 Exhibit 1: Identification Label -- Pursuant to 47 CFR 2.925, 2.1065 and 2.1033(c) 11 1.1 Location Back side of the radio product unit’s chassis (Photograph 1.1). 1.2 Type The label is of a white polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 5 lbs/in. 1.3 Markings (Text) Enlarged view of label showing FCC ID and manufacturer type number: Photograph 1.1: Zoom view of labels containing FCC ID, FCC Logo and Industry Canada ID FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Pag e 1 - 2 Exhibit 1A: General Information 1A.1 Production Plans Quantity production is planned. 1A.2 Application References -- Pursuant to 47 CFR 2.948 and 2.1061 Reference is made to the following Motorola "Application References" 1. Open Area Test Site “OATS” (FCC Registration: 95517 and 98377 / Industry of Canada: 2056-A) 2. TIMCO Engineering Lab, 849 NW State Road 45. Newberry, Florida 32669 3. FAU EMI Lab, Florida Atlantic University, 3998 N.W. 8th Street (FAU Blvd) Suite #310, Boca Raton, FL 33431. 1A.3 Data Submittal Procedure Data located in Exhibit 6 is supplied in accordance with 47CFR2, Subpart J, Part 15 Subparts A, B, and C, and Part 90, Subparts I and S of the Commission’s rules. 1A.4 Similar, currently Certified Transceiver FCC ID: AZ489FT5844, AZ489FT5830 1A.5 Additional Considerations This transceiver possesses two distinct modes of operation. The operation mode is selected via the user menu. The two transceivers can only operate independent of each other and only one mode can operate at a time. The first transceiver is of the receive-first type described in International Telecommunications Union Recommendation ITU-R M.1221 entitled Technical And Operational Requirements For Cellular Multimode Mobile Radio Stations. It must first find, acquire and lock onto a control channel from a predefined set of control channel frequencies assigned to a companion Authorized base station (e.g. – FCC ID: ABZ89FC5794). Transmission is not possible until lock to a base station control channel has been achieved, then transmission is limited to digitally modulated service request bursts on the reverse control channel. Upon recognition of a proper request, the control channel base station transmitter will then assign the transceiver a traffic channel for transmission of digital voice or circuit-switched data from the set of frequencies for which the trunking system is licensed. Attached Exhibit 12.1 provides additional descriptive details. The second transceiver is a frequency hopping spread spectrum type, operating in the unlicensed ISM (902-928 MHz) band. It uses an 8FSK (Frequency Shift Key) modulation, 50 kHz spacing up to 1 watt. The protocol is defined to have 10 interleaved hopsets of 50 frequencies each with 500 kHz separation between set members. All 10 hopsets span the entire ISM band. In the ISM transceiver mode, conversations are held only via the speakerphone; the earpiece is disabled. This radio product also integrates a receiver that will receive and process signals from Global Positioning System satellites. The radio product can also function as a Part 15.3(r) computer peripheral device when functioning as an RF modem when connected to a computer via a data cable accessory (Exhibit 12). FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Pag e 1 - 3 A Declaration of Conformity in accordance with 47CFR 2.1077(a) is provided in Exhibit 8 as evidence of compliance with Part 15 requirements for these additional Class B digital device functionalities per 47CFR15.101(a). Compliance with Part 15 requirements for the Direct-Conversion (zero IF superheterodyne) receiver has been determined by verification in accordance with 47CFR15.1.

FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 9- 1 Exhibit 9: Internal Photographs -- Pursuant to 47 CFR 2.1033(c) 12 Temporary Confidentiality Requested Photograph 9-1: Back side view of radio product PC Board Photograph 9-2: Back side view of radio product flip PC Board FCC Filing Package for Motorola i870 Transceiver FCC ID: AZ489FT5846 IDEN, Motorola Inc., 8000 W. Sunrise Blvd., Plantation, FL 33322, USA WWW.MOT.COM/iDEN Page: 9- 2 Photograph 9-3: Back side view of radio PC Board, without shields. Photograph 9-4: Front side view of radio with the keypad.

FCC ID: AZ489FT5846 SR2563 GEMS EME Form-SAR-Rpt-Rev. 4.00 Page 1 of 52 Certificate Number: 1449-01 FCC ID: AZ489FT5846 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 1 of 3 Government & Enterprise Mobility Solutions EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: August 5, 2005 Report Revision: Rev. O Report ID: FCC rpt_i870_Rev O_050805 SR2563 Responsible Engineer: Kim Uong (EME lead Eng.) Date/s Tested: 7/22/05 – 8/1/05 Manufacturer/Location: Motorola - Plantation Sector/Group/Div.: iDEN Subscriber Date submitted for test: 7/14/05 DUT Description: i870; TDMA: 236:310 (76.1%), 1:6, 2:6, 81:120, 1:12; 64QAM, 16 QAM & QPSK Modulation; 0.6W Pulse Avg. MOTOtalk (114:120 8FSK; 0.85 W nominal); GPS and Bluetooth capable Test TX mode(s): 1:3, 1:6, 81:120, 114:120, 236:310 Max. Power output: iDEN/WiDEN - 0.640W; MOTOtalk – 0.891W, Bluetooth – 2.5mW Nominal Power: iDEN/WiDEN - 0.600W; MOTOtalk – 0.850W, Bluetooth – 1mW Tx Frequency Bands: iDEN - 806-825, 896-902MHz; MOTOtalk - 902-928MHz; BT - 2.402-2.480GHz Signaling type: TDMA: iDEN; WiDEN; MOTOtalk; Bluetooth Model(s) Tested: H85XAH6RR5AN-NWF1089A Model(s) Certified: H85XAH6RR5AN-NWF1089A Serial Number(s): 000AFJ00J2; 000AFJ00HZ Classification: General Population/Uncontrolled Rule Part(s): 15 & 90 Approved Accessories: Antenna(s): 8575108A01 retractable ¼ wave antenna (806-825MHz, -7.6 dBi to -4.7dBi; 896-902MHz, -9.2dBi to -5.2dBi; 902-928Mhz, -9.2dBi to -5.2dBi Battery(ies): SNN5705C (Hi performance Li Ion); NNTN2291XXXA (Battery cover) Body worn accessory(ies): NNTN4747A (Belt clip); NNTN6231A (Carry Holster) Audio/Data cable accessory(ies): NSN6066A (Light duty RSM), NNTN5004A (headset over ear), NNTN5005A (headset over head), SYN8390B (Privacy earpiece), SYN8146C (Lightweight headset w/ boom mic), NTN8496A (Lightweight headset w/ mic), NNTN4033A (Privacy Earpiece/mic w/ PTT), NNTN5006A (Black Earbud), SYN7875C (Hearing Aid Neckloop), NTN8513B (Lightweight headband), NNTN5330A (Ear bud accessory), NNTN4620A (Silver ear bud), NNTN5774A (Stereo Head set); NKN6559A (USB Cable), NKN6560A (RS232), NNTN5405A (USB cable w/ charging), NNTN5406A (RS-232 data cable w/ charging) Max. Calc. 1-g/10-g Avg. SAR: 1.32/0.92 mW/g (Body) Max. Calc. 1-g/10-g Avg. SAR: 0.52/0.37 mW/g (Face) Max. Calc. 1-g/10-g Avg. SAR: 0.59/0.40 mW/g (Head) Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. This reporting format is consistent with the test report guidelines of the TIA TSB-150 December 2004 The results and statements contained in this report pertain only to the device(s) evaluated. Ken Enger’s signature on file Ken Enger GEMS EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 8/5/05 Certification Date: 8/5/05 Certification No.: L1050813P FCC ID: AZ489FT5846 SR2563 GEMS EME Form-SAR-Rpt-Rev. 4.00 Page 2 of 52 Part 1 of 3 1.0 Introduction and Overview .......................................................................................... 3 2.0 References, Standards, and Guidelines ........................................................................ 3 2.1 SAR Limits ............................................................................................................... 4 3.0 Description of Device Under Test (DUT).................................................................... 4 4.0 Description of Test System .......................................................................................... 5 4.1 Description of Robotics/Probes/Readout Electronics ............................................... 5 4.2 Description of Phantom(s) ........................................................................................ 5 4.3 Description of Equivalent Tissues ............................................................................ 6 5.0 Additional Test Equipment ................................................................................…

Text truncated - open the document above for the full version.