AZ489FT5852DTR510, 550, 610, 650-MOTOtalk

Title Page DTR Series Æ DTR550 & DTR650 User Guide Motorola, Inc. 8000 West Sunrise Boulevard Fort Lauderdale, Florida 33322 9980384R89-O 550 Foreword The information contained in this manual relates to all DTR Series portable radios, unless otherwise specified. Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 6881095C98) to ensure compliance with RF energy exposure limits. For a list of Motorola-approved antennas, batteries, and other accessories, visit the following web site which lists approved accessories: <http://www.motorola.com/cgiss/index.shtml> Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Document Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. Trademarks MOTOROLA and The Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005. Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ! C a u t i o n Table of Contents Foreword ......................................................................................inside cover FCC Licensing Information ...........................................................................v Chapter 1Introduction ......................................................................... 1-1 Notations Used in This Manual................................................................................................................ 1-1 Your DTR Series Radio ........................................................................................................................... 1-3 Getting Started ........................................................................................................................................ 1-4 Menu Icons .................................................................................................................................... 1-4 Status Icons ................................................................................................................................... 1-4 Text Area ....................................................................................................................................... 1-5 Display Options.............................................................................................................................. 1-5 Menu Key....................................................................................................................................... 1-5 Menus and Lists............................................................................................................................. 1-5 Battery ..................................................................................................................................................... 1-5 Battery Life..................................................................................................................................... 1-5 Charging the Radio.................................................................................................................................. 1-6 Charging using the Drop-in Charging Tray .................................................................................... 1-6 Charging using the Plug-in Charger ..............................................................................................1-6 Charging a Radio and Battery using a Multi-Unit Charger............................................................. 1-7 Battery Meter ................................................................................................................................. 1-7 Attaching the Battery ............................................................................................................................... 1-7 Swivel Belt Holster...................................................................................…

Text truncated - open the document above for the full version.

English Product Safety and RF Energy Exposure Booklet for Portable Two-Way Radios The information provided in this document supersedes the general safety information contained in user guides published prior to February 2002. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE USAGE. FOR RADIOS THAT HAVE BEEN APPROVED AS INTRINSICALLY SAFE, READ THE INSTRUCTIONS AND INFORMATION ON INTRINSIC SAFETY ON PAGE 10 OF THIS BOOKLET. ! C a u t i o n © Motorola, Inc. 2004 8000 W. Sunrise Blvd., Ft. Lauderdale, FL 33322 68P81095C98 68P81095C98-C 95C98-C.book Page 1 Wednesday, October 27, 2004 11:59 AM 2 English RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 95C98-C.book Page 2 Wednesday, October 27, 2004 11:59 AM 3 English Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission (FCC) Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable two-way radios before they can be marketed in the U.S. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. NOTE:The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. 95C98-C.book Page 3 Wednesday, October 27, 2004 11:59 AM 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard, 2003 • ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limitation of exposure to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to resolution # 303 from July 2, 2002" RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. Guidelines: • Do not remove the RF Exposure Label from the device. • User awareness i…

Text truncated - open the document above for the full version.

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. 7th November 2005 Authorization and Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia. MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT5852. Gentlemen : Motorola Inc., 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322, herein submits its application for Certification of the transmitter with FCC ID: AZ489FT5852. This two-way handheld transmitter operates in the ISM band (902 – 928 MHz) with a maximum output power of 1 Watt. Certification is sought for this transceiver, and performance data is provided for that purpose. Enclosed is a complete Type Acceptance Application. Contact me (954) 723-5793 or Fax me at (954) 723-4794, if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory compliance Email: [email protected]

REQUEST FOR CONFIDENTIALITY Date: 7 th November 2005 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality for Transmitter with FCC ID: AZ489FT5852 Dear Sir / Madam, Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures) and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10 and 12 as “Confidential.” Please contact me at 954-723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Email: [email protected] EXHIBIT 13B SHEET 1

Motorola DTR Series FCC ID: AZ489FT5852 EXHIBIT 3: EXTERNAL PHOTOGRAPHS – Pursuant 47 CFR 2.1033©12 Figure 3-1: Photograph of Front with Antenna Figure 3-2: Photograph of Front with Antenna removed. Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 1 of 3 Motorola DTR Series FCC ID: AZ489FT5852 Figure 3-3: Photograph of back. Figure 3-4: Photograph of Unique Connector Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 2 of 3 Motorola DTR Series FCC ID: AZ489FT5852 Figure 3-5. Photo showing inside of the battery housing. Figure 3-6. Occupational, and FCC Label Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 3 of 3

Motorola DTR Series FCC ID: AZ489FT5852 EXHIBIT 1: IDENTIFICATION LABEL – Pursuant 47 CFR 2.925, 2.1065 and 2.1033(c)11 1.1 Location The FCC identification label is applied to the radio inside the battery compartment (Figure 1-1) 1.2 Type The label is a white polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 5 lbs/in. 1.3 Markings (Text) An enlarged photo of the label showing FCC identification is shown in Figure 1-2. Figure 1-1: Location of the FCC label in the radio Figure 1-2. Enlarged view of FCC label Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 1 of 2 Motorola DTR Series FCC ID: AZ489FT5852 EXHIBIT 1A: GENERAL INFORMATION – Pursuant 47 CFR 2.948, 2.1061 1A.1 Production Plans Quantity production is planned. 1A.2 Application References – Pursuant 47 CFR 2.948 and 2.1061 Reference is made to the following Motorola “Application References.” 1. Open Air test Site (FCC Registration: 91932; Industry Canada: IC3679) 1A.3 Data Submittal Procedure Data located in Exhibit 6 is supplied in accordance with Part 2, Sub-part J and Part 15 of the Commission’s rules. 1A.4 Similar, currently Type Accepted Transmitter FCC ID: AZ489FT5842 1A.5 Additional Considerations The transceiver is frequency hopping spread spectrum operating in the unlicensed ISM (902-928 MHz) band. It uses an 8FSK (Frequency Shift Key) modulation, 50 kHz spacing up to 1 watt. The protocol is defined to have 10 interleaved hopsets of 50 frequencies each with 500 kHz separation between set members. All 10 hopsets span the entire ISM band. Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 2 of 2

Motorola DTR Series FCC ID: AZ489FT5852 EXHIBIT 9: INTERNAL PHOTOGRAPHS – Pursuant 47 CFR 2.1033(c) 12 Figure 9-1: Internal photo with shields intact. Figure 9-2: Internal photo without shields. Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 1 of 3 Motorola DTR Series FCC ID: AZ489FT5852 Figure 9-3: Internal photo with shields intact Figure 9-4: Internal photo without shields. Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 2 of 3 Motorola DTR Series FCC ID: AZ489FT5852 Figure 9-3: Internal photo showing the display. Motorola Inc., 8000 W. Sunrise Blvd. Plantation, FL 33322 Page 3 of 3

FCC ID: AZ489FT5852 SR2845 GEMS EME Form-SAR-Rpt-Rev. 4.00 Page 1 of 24 Certificate Number: 1449-01 FCC ID: AZ489FT5852 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 1 of 2 Government & Enterprise Mobility Solutions EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: September 23, 2005 Report Revision: Rev. O Report ID: FCC rpt_RLN6081A_Rev O_050923 SR2845 Responsible Engineer: Deanna Zakharia (Elect. Principal Staff Eng.) Date/s Tested: 8/31/05-9/7/05 & 9/13/05 Manufacturer/Location: Motorola - China Sector/Group/Div.: BRU Date submitted for test: 8/23/05 DUT Description: ISM/RBR/1.0watts Digital two-way radio w/ display/removable antenna/10ch Black/Lithium Ion Test TX mode(s): 114:120 Max. Power output: 1.0 watts Nominal Power: 0.990 watts Tx Frequency Bands: 902.525MHz – 927.475MHz Signaling type: iDEN Model(s) Tested: RLN6081A Model(s) Certified: RLN6081A Serial Number(s): 0002, 0003 Classification: Occupational/Controlled Rule Part(s): 90 Approved Accessories: Antenna(s): 8505241U04 (902-928MHz Whip ½ wave antenna; 3dBi); 8505241U06 (902-928MHz Whip ¼ wave antenna 0dBi Battery(ies): NNTN4655B (3.6V Li Ion 1450mAh); SNN5706B (3.6V Li Ion 1050mAh) Body worn accessory(ies): RLN5713A (Holster) Audio/Data cable accessory(ies): HMN9026C (Remote speaker microphone); NTN9159E (light headset); HMN9025C (Ear bud w/PTT microphone); HCSN4000C (Ear bud w/ PTT microphone); HCSN4001B (Earpiece w/ boom microphone); HMN9039D (Earpiece w/ boom microphone) HMN9038A (Headset w/swivel boom mic; RLN5714A (Earpiece with inline mic); NNTN5491A (mini keypad) Max. Calc. 1-g/10-g Avg. SAR: 1.17/0.85 mW/g (Body) Max. Calc. 1-g/10-g Avg. SAR: 0.69/0.51 mW/g (Face) Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. This reporting format is consistent with the test report guidelines of the TIA TSB-150 December 2004 The results and statements contained in this report pertain only to the device(s) evaluated. Signature on file Ken Enger GEMS EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 9/26/05 Certification Date: 9/26/05 Certification No.: L1050956P FCC ID: AZ489FT5852 SR2845 GEMS EME Form-SAR-Rpt-Rev. 4.00 Page 2 of 24 Part 1 of 2 1.0 Introduction and Overview .......................................................................................... 3 2.0 References, Standards, and Guidelines ........................................................................ 3 2.1 SAR Limits ............................................................................................................... 4 3.0 Description of Device Under Test (DUT).................................................................... 4 4.0 Description of Test System .......................................................................................... 4 4.1 Description of Robotics/Probes/Readout Electronics ............................................... 5 4.2 Description of Phantom(s) ........................................................................................ 5 4.3 Description of Equivalent Tissues ............................................................................ 5 5.0 Additional Test Equipment ......................................................................................... 6 6.0 SAR Measurement System Verification ..................................................................... 6 6.1 Equivalent Tissue Test results.................................................................................. 7 6.2 System Check Test results ....................................................................................... 7 7.0 DUT Test Strategy and Methodology ......................................................................... 7 7.1 Test Plan................................................................................................................... 8 7.2 Device Positioning Procedures ................................................................................ 8 8.0 Environmental Test Conditions................................................................................... 9 9.0 Test Results Summary................................................................................................. 9 9.1 Highest S.A.R. results calculation methodology.................................................... 12 10.0 Conclusion ...............................................................................................................12 APPENDICES A Measurement Uncertainty...............................................................13 B Probe Calibration Certificates...........................................................16 Part 2 of 2 C. Dipole Calibration Certificates..........................................................2 D. Test System Verification Scans.........................................................7 E. DUT Scans (Shortened scans & highest SAR configurations).....................17 F. DUT Supplementary Data (e.g. Power Slump).......................................21 G. DUT Test Position Photos................................................................22 H. DUT & Accessory Photos...............................................................24 I. DUT Body-worn Separation Distances................................................25 REVISION HISTORY Date Revision Comments 9/23/05 O Original release FCC ID: AZ489FT5852 SR2845 GEMS EME Form-SAR-Rpt-Rev. 4.00 Page 3 of 24 1.0 Introduction and Overview This report details the utilization, test setup, test equipment, and test results of the Specific Absorption Rate (S.A.R.) measurements performed at the GEMS …

Text truncated - open the document above for the full version.

FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 1 of 25 Certificate Number: 1449-01 FCC ID: AZ489FT5852 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 2 of 2 Government & Enterprise Mobility Solutions EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: September 22, 2005 Report Revision: Rev. O Report ID: FCC rpt_RLN6081A_Rev O_050922 SR2845 Responsible Engineer: Deanna Zakharia (Elect. Principal Staff Eng.) Date/s Tested: 8/31/05-9/7/05 & 9/13/05 Manufacturer/Location: Motorola - China Sector/Group/Div.: BRU Date submitted for test: 8/23/05 DUT Description: ISM/RBR/1.0watts Digital two-way radio w/ display/removable antenna/10ch Black/Lithium Ion Test TX mode(s): 114:120 Max. Power output: 1.0 watts Nominal Power: 0.990 watts Tx Frequency Bands: 902.525MHz – 927.475MHz Signaling type: iDEN Model(s) Tested: RLN6081A Model(s) Certified: RLN6081A Serial Number(s): 0002, 0003 Classification: Occupational/Controlled Rule Part(s): 90 Approved Accessories: Antenna(s): 8505241U04 (902-928MHz Whip ½ wave antenna; 3dBi); 8505241U06 (902-928MHz Whip ¼ wave antenna 0dBi Battery(ies): NNTN4655B (3.6V Li Ion 1450mAh); SNN5706B (3.6V Li Ion 1050mAh) Body worn accessory(ies): RLN5713A (Holster) Audio/Data cable accessory(ies): HMN9026C (Remote speaker microphone); NTN9159E (light headset); HMN9025C (Ear bud w/PTT microphone); HCSN4000C (Ear bud w/ PTT microphone); HCSN4001B (Earpiece w/ boom microphone); HMN9039D (Earpiece w/ boom microphone) HMN9038A (Headset w/swivel boom mic; RLN5714A (Earpiece with inline mic); NNTN5491A (mini keypad) Max. Calc. 1-g/10-g Avg. SAR: 1.17/0.85 mW/g (Body) Max. Calc. 1-g/10-g Avg. SAR: 0.69/0.51 mW/g (Face) Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. This reporting format is consistent with the test report guidelines of the TIA TSB-150 December 2004 The results and statements contained in this report pertain only to the device(s) evaluated. Signature on file Ken Enger GEMS EME Lab Senior Resource Manager, Laboratory Director, Approval Date: 9/26/05 Certification Date: 9/26/05 Certification No.: L1050956P FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 2 of 25 Appendix C Dipole Calibration Certificates FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 3 of 25 FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 4 of 25 FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 5 of 25 FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 6 of 25 FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 7 of 25 Appendix D Test System Verification Scans Note: Dipole validation scans at the head from SPEAG are provided in Appendix D. The GEMS EME lab validated the dipole to the applicable IEEE system performance targets. Within the same day system validation was performed using FCC body tissue parameters to generate the system performance target values for body at the applicable frequency. The results of the GEMS EME system performance validation are provided herein. To assess the isotropic characteristics of the measurement probe, two system performance zoom scans (0 and 90 degrees) were measured. The results were averaged together and adjusted to account for the power drift in order to obtain the final calculated 1 gram results. FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 8 of 25 Motorola GEMS EME Lab SPEAG 900 MHz Dipole; Model D900V2, SN 085; Test Date: 8/31/05 Run #: CM-SYSP-900B-050830-01 Sim.Tissue Temp: 21.9 (C) TX Freq: 900(MHz) Start power: 250 (mW) Target: 11.41 mW/g for 1g SAR 7.43 mW/g for 10g SAR 11.57 mW/g calculated 1g-SAR; 1.37 % from target (including drift) 7.46 mW/g calculated 10g-SAR; 0.38 % from target (including drift) Probe: ET3DV6 - SN1383, Calibrated: 2/24/2005, ConvF(6.03, 6.03, 6.03) Duty Cycle: 1:1, Medium: 900 MHz FCC Body, Medium parameters used: σ = 1.04 mho/m, ε r = 52.6; ρ = 1000 kg/m3 Electronics: DAE3 Sn406, Calibrated: 11/17/2004 System Performance Check/0-Degree 5x5x7 Cube (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm; Reference Value = 57.2 V/m; Power Drift = 0.0126 dB SAR(1 g) = 2.9 mW/g; SAR(10 g) = 1.87 mW/g Maximum value of SAR (measured) = 3.16 mW/g System Performance Check/90-Degree 5x5x7 Cube (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm; Reference Value = 57.2 V/m; Power Drift = 0.0126 dB SAR(1 g) = 2.9 mW/g; SAR(10 g) = 1.87 mW/g FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 9 of 25 Motorola GEMS EME Lab SPEAG 900 MHz Dipole; Model D900V2, SN 085; Test Date: 9/1/05 Run #: CM-SYSP-900B-050901-01 Sim.Tissue Temp: 21.7 (C) TX Freq: 900(MHz) Start power: 250 (mW) Target: 11.41 mW/g for 1g SAR 7.43 mW/g for 10g SAR 11.84 mW/g calculated 1g-SAR; 3.75 % from target (including drift) 7.67 mW/g calculated 10g-SAR; 3.22 % from target (including drift) Probe: ET3DV6 - SN1383, Calibrated: 2/24/2005, ConvF(6.03, 6.03, 6.03) Duty Cycle: 1:1, Medium: 900 MHz FCC Body, Medium parameters used: σ = 1.06 mho/m, ε r = 52.7; ρ = 1000 kg/m3 Electronics: DAE3 Sn406, Calibrated: 11/17/2004 System Performance Check/0-Degree 5x5x7 Cube (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm, Reference Value = 56.5 V/m; Power Drift = -0.051 dB SAR(1 g) = 2.87 mW/g; SAR(10 g) = 1.86 mW/g System Performance Check/90-Degree 5x5x7 Cube (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm, Reference Value = 56.5 V/m; Power Drift = -0.051 dB SAR(1 g) = 2.88 mW/g; SAR(10 g) = 1.86 mW/g FCC ID: AZ489FT5852 SR2845 CGISS EME Form-SAR-Rpt-Rev. 4.00 Page 10 of 25 Motorola GEMS EME Lab SPEAG 9…

Text truncated - open the document above for the full version.

Motorola DTR Series FCC ID: AZ489FT5852 EXHIBIT 7: MEASUREMENT PROCEDURES – Pursuant 47 CFR 2.947 7.1 RF Power -- Pursuant to 47 CFR 2.947(c) Method of Conducted Output Power Measurement: Adaptation of TIA/EIA-603-A clause 2.2.1 for Pulsed Measurements The RF output power is not adjustable by the user. The output power is controlled by the radio software. To obtain RF output power reading, the radio was programmed to utilize the maximum output power setting. A non-standard connector was used to interface with the radio at the antenna port to measure RF Output power. All conducted measurements were performed via this test port. 7.3 Emission Chart: 902 MHz to 928 MHz ISM Band --- pursuant to 47 CFR 15.247© (1) Connect DUT to spectrum analyzer through 10 dB, 2W, RF power attenuator (2) Set up the spectrum analyzer as follows for measurement: (a) Center frequency 902.525 MHz (b) Span = 100KHz (c) Sweep = Auto (d) Ref Level = 30 dBm (e) Trace = Max Hold (Positive peak detector) (3) Initiate transmission at 902.525 MHz and measure power (4) Change spectrum analyzer frequency to center frequency 901.95 MHz and measure power. (5) Repeat steps 2 a…

Text truncated - open the document above for the full version.