AZ489FT6024VideoTag

V T-10 0 QUICKSTART GUIDE QUICKSTART GUIDE | VT-1002 TABLE OF CONTENTS INTRODUCTION 3 HOW TO CHARGE YOUR VT-100 3 HOW TO USE YOUR VT-100 6 HOW TO POWER UP YOUR VT-100 6 IF YOUR VT-100 IS CONFIGURED TO LIVESTREAM 7 IF YOUR VT-100 IS NOT CONFIGURED TO LIVESTREAM 7 HOW TO STOP RECORDING 8 WEARING YOUR VT-100 9 VT-100 ROTATABLE LONG ALLIGATOR CLIP 10 VT-100 KLICK FAST STUD 11 VT-100 SPORTS CAMERA PILLAR 12 VT-100 EPAULETTE (SHOULDER) CLIP 13 LANYARDS 15 REGULATORY INFORMATION 16 QUICKSTART GUIDE | VT-1003 INTRODUCTION Thank you for choosing the VT-100 Body-worn camera. This simple guide will lead you through the set up and use of your VT-100. The VT-100 is designed to function on standby for up to three months. Therefore, it is necessary to fully charge the device before first use. Microphone Attachment Point for Clip FRONTBACK Slot for Custom ID Card Lens LED Press to Record Button & LED LED Press to Record Button & LED Micro USB Port QUICKSTART GUIDE | VT-1004 HOW TO CHARGE YOUR VT-100 To charge, you will need either a USB charging cable (AC-USB-MICROB-100) or the VT-100 variant of the 14-Port Dock (VT-100-DOCK14). USB Charging Cable (AC-USB-MICROB-100) VT-100 14-Port Dock (VT-100-DOCK14) QUICKSTART GUIDE | VT-1005 While connected to power, the LED on the right side of the device will flash green while charging, and will go a solid green when fully charged. If the VT-100 is configured to connect to Wi-Fi® while docking, the back-right LED will flash blue when searching for a Wi-Fi connection, and will become a solid blue when a Wi-Fi connection is found. If your VT-100 has not already been configured by your system administrator, please see the VideoManager Admin Guide for details on how to configure your VT-100. CHARGING (Flashing Green) SEARCHING FOR WI-FI (Flashing Blue) CONNECTED TO WI-FI (Solid Blue) QUICKSTART GUIDE | VT-1006 HOW TO USE YOUR VT-100 HOW TO POWER UP YOUR VT-100 The VT-100 starts recording (and live streaming, if it has been configured to do so), as soon as it is powered up. To power up your device, press either of the two buttons on the back of the device. The device will vibrate briefly, and recording will start. POWERING UP YOUR VT-100 Press and hold either of the power buttons QUICKSTART GUIDE | VT-1007 IF YOUR VT-100 IS CONFIGURED TO LIVESTREAM The recording LED on the back-left of the device should shine solid red, as well as the LED on the front of the device. This indicates that the device is recording. The LED on the back-right of the device should be flashing blue - about once a second - indicating that it is looking for Wi-Fi to connect to. A solid blue light on the back-right LED indicates that the VT-100 has connected to the Wi-Fi. IF YOUR VT-100 IS NOT CONFIGURED TO LIVESTREAM The recording LED on the back-left of the device should now be a solid red, as well as the LED on the front of the device. This indicates that the device is recording. SEARCHING FOR WI-FI (Flashing Blue) CONNECTED TO WI-FI (Solid Blue) RECORDING (Solid Red) RECORDING (Solid Red) QUICKSTART GUIDE | VT-1008 HOW TO STOP RECORDING To stop recording, press and hold either of the buttons on the back of your device for one second. The LED on the front of the device will switch off. If your VT-100 is configured to livestream, the back-right LED will remain a solid blue, indicating that the device is still connected to the Wi-Fi, but no footage is being recorded. After 10 more seconds, the camera will automatically switch off. Once recording has stopped, the VT-100 will always automatically power down after ten seconds of inactivity in order to preserve battery life. POWERING DOWN YOUR VT-100 Press and hold either of the power buttons STOPPED RECORDING (No LED) STOPPED RECORDING (No LED) CONNECTED TO WI-FI (Solid Blue) This light will go out after 10 seconds QUICKSTART GUIDE | VT-1009 WEARING YOUR VT-100 The VT-100 can be attached to most uniforms and items of clothing using one of the robust clips which can be purchased from Motorola Solutions (see following pages for options available). These clips are rotatable - however, the camera should always remain upright when capturing footage. QUICKSTART GUIDE | VT-10010 VT-100 ROTATABLE LONG ALLIGATOR CLIP To attach a Rotatable Long Alligator clip (VT-100-FIX-ALIG) to your VT-100, slide the attachment into the mounting rail on the back of your device until a firm click is heard and the attachment point is held firmly in place. To detach the clip clip from your VT-100, pull the lip of the attachment plate away from the body of your VT-100 and firmly pull the attachment out of the rails. Slide rotatable attachment down QUICKSTART GUIDE | VT-10011 VT-100 KLICK FAST STUD To attach a Klick Fast stud to your VT-100, you will need: • A VT-100 • A VT-100 Klick Fast Stud (VT-100-FIX-KF-ALT) • A Klick Fast dock (usually on a uniform), Firstly, pinch the two metal clips on the back of the stud together, and slide the attachment into the mounting rail on the back of your device until a firm click is heard. Release the metal clips. Slide the VT-100 into the Klick Fast dock upside-down, so the device’s serial number is pointing towards the ceiling. Once the stud is firmly attached to the dock, rotate the VT-100 by twisting it until it is the right way up. To detach a Klick Fast stud from the Klick Fast dock, rotate the device by 180 degrees, so the VT-100 is upside down again. The stud should slide out of the dock easily. It is now possible to detach the stud from the VT-100. To do so, pinch the two metal clips on the back of the stud together, and slide the stud upwards out of the attachment rail. QUICKSTART GUIDE | VT-10012 VT-100 SPORTS CAMERA PILLAR To attach a sports camera pillar to your VT-100, you will need: • A VT-100 • A VT-100 Sports Camera Pillar (VT-100-FIX-SPORT) • A sports camera accessory to attach the camera to • A securing pin (usually supplied with the sports camera accessory) • A securing nut (usually permanently attached to the sports camer…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Motorola Solutions, Inc. 2020.4.3 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Motorola Solutions, Inc._____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: AZ489FT6024 Product Description: VideoTag Model: VT-100 Sincerely, Client’s signature Client’s name: Deanna Zakharia Title : Manager,Regulatory Compliance Contact information / address : : 8000 West Sunrise Blvd Ft.Lauderdale FL 33322, USA

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 Motorola Solutions, Inc. 2020.4.3 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: AZ489FT6024 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name: Deanna Zakharia Title : Manager,Regulatory Compliance Contact information / address : : 8000 West Sunrise Blvd Ft.Lauderdale FL 33322, USA

SCS-F190 WiFi Channel 12&13 Declaration Letter Page 1 of 2 Rev.2.0 Created by William Graff Approved by Bao-Thuong Nguyen WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Revision History Approved Date From To Initial Release (obsolete) Initial 1.0 December 22, 2015 Modify the select options (current) 1.0 2.0 September 23, 2016 SCS-F190 WiFi Channel 12&13 Declaration Letter Page 2 of 2 Rev.2.0 Created by William Graff Approved by Bao-Thuong Nguyen Motorola Solutions, Inc. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: AZ489FT6024 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels can’t be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note: 1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following: Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Deanna Zakharia / Manager,Regulatory Compliance Signature: Phone: (954)723-4707 Email: [email protected] Date:2020.4.3

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Reference No.: 190731N003 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Reference No.: 190731N003 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Reference No.: 190731N003 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Reference No.: 190731N003

Label sizeÿ41.5*23MM Label and Location

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Reference No.: 190731N003 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Reference No.: 190731N003 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Reference No.: 190731N003 RF ANT

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 25 Report No. : SA190731W001 Issued Date : Apr. 07, 2020 FCC SAR Test Report Report No. : SA190731W001 Applicant : Motorola Solutions, Inc Address : 8000 West Sunrise Blvd Plantation, FL 33322, USA Product : VideoTag FCC ID : AZ489FT6024 Brand : Motorola Solutions Model No. : VT-100 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r02 KDB 248227 D01 v02r02 / KDB 447498 D01 v06 Sample Received Date : Dec. 02, 2019 Date of Testing : Dec. 08, 2019 CERTIFICATION: The above equipment have been tested by BV 7LAYERS COMMUNICATIONS TECHNOLOGY (SHENZHEN) CO. LTD., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies. Prepared By : Wiky Zhang / Engineer Approved By : Luke Lu / Manager This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 25 Report No. : SA190731W001 Issued Date : Apr. 07, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ................................................................ ............................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4. 1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3 .4. 4 Spatial Peak SAR Evaluation ............................................................…

Text truncated - open the document above for the full version.

FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA190731W001 <Photographs of EUT> <Antenna Location> The separation distance for antenna to edge: Antenna To Top Side (mm) To Bottom Side (mm) To Left Side (mm) To Right Side (mm) WLAN / BT 22 13 67 0 <EUT Front View> Top Side Left Side Right Side WLAN Antenna Bottom Side FCC SAR Test Report Report Format Version 5.0.0 Report No. : SA190731W001 <Photographs of SAR Setup> Front Face of EUT with 0.5 cm Gap Rear Face of EUT with 0 cm Gap Right Side of EUT with 0.5 cm Gap Top Side of EUT with 0.5 cm Gap Bottom Side of EUT with 0.5 cm Gap

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 57 Report Version 1 Test Report No.: RF190731N003 TEST REPORT Applicant Motorola Solutions, Inc. Address 8000 West Sunrise Blvd Fort Lauderdale, FL 33322 United States Manufacturer or Supplier E-Song Digital Limited Address 6F Block B1 Jintai Industrial Park Hangcheng Road Gushu Xixiang Bao'an District Shenzhen City PRC Product VideoTag Brand Name Motorola Solutions Model VT-100 Additional Model & Model Difference N/A Date of tests Jul. 31, 2019 ~ Nov. 26, 2019 The tests have been carried out according to the requirements of the following standard: FCC Part 15, Subpart C, Section 15.247 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Andy Zhu Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Apr. 02, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 96, Guantai Road (Houjie Section), Houjie Town, Dongguan City, Guangdong Province. 523942. People’s Republic of China. Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 57 Report Version 1 Test Report No.: RF190731N003 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 4 1 SUMMARY OF TEST RESULTS .................................................................................................... 5 2 MEASUREMENT UNCERTAINTY ................................................................................................. 5 3 GENERAL INFORMATION ............................................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT........................................................................................... 6 3.2 DESCRIPTION OF TEST MODES............................................................................................. 7 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................................... 8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................................... 8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 11 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................................... 11 4 TEST TYPES AND RESULTS ...................................................................................................... 12 4.1. CONDUCTED EMISSION MEASUREMENT ...................................................................... 12 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................................... 12 4.1.2 TEST INSTRUMENTS ..................................................................................................... 12 4.1.3 TEST PROCEDURES ..................................................................................................... 13 4.1.4 DEVIATION FROM TEST STANDARD ........................................................................... 13 4.1.5 TEST SETUP ................................................................................................................... 14 4.1.6 EUT OPERATING CONDITIONS .................................................................................... 14 4.1.7 TEST RESULTS .............................................................................................................. 15 4.2. RADIATED EMISSION MEASUREMENT ........................................................................... 17 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .................................................... 17 4.2.2 TEST INSTRUMENTS ..................................................................................................... 18 4.2.3 TEST PROCEDURES ..................................................................................................... 19 4.2.4 DEVIATION FROM TEST STANDARD ........................................................................... 20 4.2.5 TEST SETUP ................................................................................................................... 20 4.2.6 EUT OPERATING CONDITIONS ................................................................................…

Text truncated - open the document above for the full version.