AZ489FT7010Handheld Terminal with GPRS, WLAN & Bluetooth

Owner’s Manual X-Pad Handheld Data Terminal 6802974C15-O @6802974C15@ a COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this instruction manual may include copyrighted Motor- ola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copy- righted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer pro- grams contained In the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product. EPS ñ 34440- B This warranty applies within the fifty (50) United States, the District of Columbia and Can- ada. Document Copyrights No duplication or distribution of this document or any portion thereof shall take place with- out the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reli- able. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. Commercial Warranty Limited Warranty MOTOROLA COMMUNICATION PRODUCTS I. What This Warranty Covers And For How Long MOTOROLA INC. (ìMOTOROLAî) warrants the MOTOROLA manufactured Communication Products listed below (ìProductî) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equip- ment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. General Provisions This warranty sets forth the full extent of MOTOROLAís responsibilities regarding the Product. Repair, replace- ment or refund of the purchase price, at MOTOROLAís option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOR- OLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABIL- ITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. State Law Rights SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. How To Get Warranty Service You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized X-Pad UnitsOne (1) Year Product AccessoriesOne (1) Year warranty service locations. If you first contact the company which sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola at 1-888-567-7347 US/Canada. V. What This Warranty Does Not Cover A. Defects or damage resulting from use of the Product in other than its normal and customary manner. B. Defects or damage from misuse, accident, water, or neglect. C. Defects or damage from improper testing, operation, maintenance, installation, alteration, mod- ification, or adjustment. D. Breakage or damage to antennas unless caused directly b…

Text truncated - open the document above for the full version.

Please retain for future use 6802974C16-A March, 2005 @6802974C1 6@ Commercial, Government and Industrial Solutions Sector 1301 E. Algonquin Road, Schaumburg, IL 60196 Copyright © 2005 Motorola All Rights Reserved. Product Safety and RF Energy Exposure Booklet for Portable Data Computers with Two-Way Radios This two-way radio handheld data computer uses electromagnetic energy in the ra- dio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and re- ceive information. RF energy is one form of electromagnetic energy. Other forms in- clude, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used im- properly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organiza- tions to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radio products are designed, manufactured, and tested to en- sure they meet government-established RF exposure levels. In addition, manufac- turers also recommend specific operating instructions to users of two-way radio products. These instructions are important because they inform users about RF en- ergy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy ex- posure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html HANDHELD DATA COMPUTER WITH RADIO - PRODUCT OPERA- TION AND EME EXPOSURE Your Motorola two-way radio device complies with the following RF energy exposure standards and guidelines: •United States Federal Communications Commission, Code of Federal Regula- tions; 47CFR part 2 sub-part J •American National Standards Institute (ANSI) / Institute of Electrical and Elec- tronic Engineers (IEEE) C95. 1-1992 •Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition •International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 •Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 •Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2003 • ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limita- tion of exposure to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to resolution # 303 from July 2, 2002" BEFORE USING THIS DATA RADIO COMPUTER, READ THIS BOOK- LET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS FOR COMPLI- ANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE USAGE. HANDHELD DATA COMPUTER X- Pad ab CAUTION Operating Instructions •Hold the handheld data computer in a vertical position in front of the face with the microphone (and other parts of the computer) at least one inch (2.5 centi- meters) away from the nose or lips. Keeping the handheld data computer at a proper distance is important since RF exposures decrease with increasing dis- tance from the antenna. •When worn on the body, always place the handheld data computer in a Motor- ola-approved clip, holder, holster, case, or body harness for this product. Using approved bodyworn accessories is important because the use of non- Motorola-approved accessories may result in exposure levels, which exceed the FCC environment RF exposure limits. Approved Accessories Use only Motorola-approved supplied or replacement batteries and accessories. Use of Non-Motorola approved batteries and accessories may exceed the FCC (IEEE) and ICNIRP RF exposure guidelines. For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth. Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnet- ic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your handheld data computer in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to exter- nal RF energy. Aircraft When instructed to do so, turn off your handheld data computer when on board an aircraft. Any use of a handheld data computer must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a hand- held wireless radio and a pacemaker. These recommendations are consistent with Persons with pacemakers should: •ALWAYS keep the handheld data computer more than 6 inches (15 centime- ters) from their pacemaker when the radio is turned ON. •Not carry the handheld data computer in the breast pocket. •Use the ear opposite the pacemaker to minimize the potential for interference. •Turn the handheld data computer OFF immediately if there is any reason to suspect that interference is taking place. • Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your heari…

Text truncated - open the document above for the full version.

Motorola Inc FCC ID: AZ489FT7010 Exhibit 2: Statement of Certification—Pursuant to 47 CFR 2.907 The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications: B.Sc in Electrical Engineering, 2001 Tel Aviv university Institute of Technology 4 years experience in RF design. NAME: Aviv Shachar SIGNATURE: /s/ Aviv Shachar (signed) DATE: 14th April 2005 POSITION: Xpad RF engineering I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. NAME: Assaf Shlomo SIGNATURE: /s/ Assaf Shlomo (signed) DATE: 14th April 2005 POSITION: XPA Project Manager Exhibit 2

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA M MOTOROLA FCC ID: AZ489FT7010 Date: 30th May 2005 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT7010. Xpad Model:F4423A Dear Sir or Madam: Motorola Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein submits application for Certification of the subject transmitter. Please find the attached application for Certification of the Xpad, which contains Bluetooth, WLAN and g20 transmitters, operating with a maximum transmit power: 2 mW for Bluetooth at the frequency range 2.402-2.48GHz; 0.056W for WLAN at the frequency range 2412-2462MHz; G20- 0.757W for GSM850 band, 0.971W for PCS1900 bands; The product testing was performed by Hermon Laboratories, which is listed by the FCC under Registration Numbers 90623 and 90624. A complete Certification application is enclosed, contact Mike Ramnath at (954) 723- 5793 or Fax (954) 723-4794 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13a

FCC ID: AZ489FT7010 ______________________________________________________________________________ Motorola Inc , 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. CONFIDENTIALITY REQUESTED Date: 5 th May 2005 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ489FT7010. Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune-Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos), Exhibit 6 and Exhibit 9 (Internal Photos) as Temporary Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” And Exhibit 3, 6 and 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13b

FCC ID: AZ489FT7010 Date: 26 th May 2005 Gregory Czumak PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 Re: Correspondence Number 150523A.AZ4 with FCC ID: AZ489FT7010. Confirmation Number: 1505230262 Dear Mr. Czumak; Motorola Inc., 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322, herein submits its response to the 25 th May 2005 request for information in Correspondence Number 150523A.AZ4. Q1. Please describe how the EUT prevents simultaneous transmission of the GPRS transmitter (Parts 22 and 24) and the WLAN transmitter (Part 15C). R1. The radios are controlled by a s/w manager that prevents GPRS & WLAN to simultaneously transmit. This protection is embedded in the System Software layer loaded by the factory. In addition, Motorola instructed the application developers, that the application will prevent this scenario as well. Q2. The EUT contains a previously certified GSM (GPRS) module. Therefore, please either: (a) add “This device contains TX FCC ID: IHDT56DB1” to the label, or (b) submit a copy of the EMC test report for the GSM module, so that it can be included in this composite filing. R2. We updated the label as it was suggested: “This device contains TX FCC ID: IHDT56DB1”. Please see attached a copy of the updated label. Please see the updated Exhibits 1 & 3 to reflect this update. Q3. The EUT is also a personal computer, therefore, please either: (a) put the DoC logo on the label (assuming that it has been so tested), (b) submit a Part 15B test report for the pc portion of the EUT, so that it can be included in this composite filing, or (c) justify a Class A rating for the pc, based on intended use, cost, and marketing. R3. Class A justification: The unit was developed and funded by FedEx Inc. The unit will be use by FedEx users and not intend to be used by the general public market. Q4. The EMC report lists the conducted output power of the Section 15.247 WLAN as 0.056 W, however, the SAR report lists its conducted output power level as 0.093 W. Please address this discrepancy. R4. The unit for the SAR test was adjusted to the “worst case”, which is 0.093 W power output level. This adjustment is possible only by using the s/w tool (provided by Samsung) that was used in the development stage. This tool is not part of the product nor will be provided outside of the development department (factory, service or any external site). The unit for FCC was tested for the required granted level, which is 0.056 W. We ensured with the WLAN manufacturer (Samsung) that each module power level will not exceed 0.056 W. Our factory is testing every WLAN radio to ensure that the power out level will not exceed 0.056 W. Please see the updated Exhibits 13a and 12. FCC ID: AZ489FT7010 Q5. Please provide internal photos of the Bluetooth transmitter, as well as a revised photo #7 with the RF shield removed. R5. Attached is a photo of the internal Bluetooth transmitter w/o shield. Please see the updated Exhibit 9 to reflect this mod. Q6. The Confidentiality Request lists Exhibit 6, the test report. Test reports may not be held confidential- please delete it from the request. In addition, the request refers to Exhibit 4 as a circuit description, when it is really the block diagrams. Please correct the request accordingly. R6. The Request for Confidentiality letter was corrected to refer to Exhibit 4 as Block Diagrams instead of Circuit Descriptions. Also, we are removing that the Test Report 9Exhibit 6) be held under the “Temporary Confidentiality”. See the attached corrected Exhibit 13b. Has been answered by Mike Ramnath on May 26 Q7. Please confirm that the following is a typo: Table 7.3.3 of the EMC report, the frequency of the spurious emission should be 2483.5 MHz, and not 2383.5 MHz. R7. Typo was corrected. Hermon lab confirms that this was a typo, the frequency of the spurious emission is 2483.5 MHz, as shown in Plots 7.3.25 to 7.3.28. Attached please find the revised test report. Q8. Please submit the operational description (referred to as Exhibit 12 in the confidentiality request). R8. Re-sending Exhibit 12. Has been answered by Mike Ramnath on May 26 Contact me at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Email: [email protected]

Date: December 12, 2005 Subject: Request for information regarding FCC ID: AZ489FT7010 Digital Transmission System (Handheld Terminal with GPRS, WLAN & Bluetooth) Reference: Correspondence Reference Number: 24089 731 Confirmation Number: TC299967 Date of Original Email: 10/28/2005 Prepared by: Andrew Bachler, Principal Staff Engineer Motorola Mobile Device Business Libertyville, Illinois Motorola, Inc. requests a 30 day extension to complete the response to the CRN24089 FCC questions. 1

December 20, 2005 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 25292 Request for Tech. Info.: 12/19/2005 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated December 19, 2005. 1. We confirm with the applicant that the GSM and the Bluetooth can transmit simultaneously. 2. Upon the request of Motorola’s Development Engineering, the power reported in the RF Exposure report took a more conservative approach by providing data that is 20% higher than the maximum power. However, the factory final test upper limit, per the factory 12M Spec, should not exceed those on the FCC Grant for FCC ID: IHDT56DB1. 3. Please find attached the Internal Photos that show all antenna positions relative to the housing. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

February 27, 2006 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 26082 Request for Tech. Info.: 01/30/2006 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated January 30, 2006. 1. The Bluetooth powers submitted in the SAR report are within previously allowed tolerances based on the attached interpretation by the commission. Please note that GSM transmitters in both bands easily operate linearly at 1 Watt. We understand that the letter of Supplement C advises SAR testing at a lower power level. The applicant is willing to accept the higher SAR levels on the Grant of Authorization. This testing will be repeated if required. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

March 2, 2006 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 26083 Request for Tech. Info.: 01/30/2006 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated January 30, 2006. 1. Please note that corrections are being made to the original Grant of Authorization. To avoid conflicts we hereby request for an extension of 30 days to respond accordingly. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA Date: 29 th March 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Class II Permissive Change application to certified Transmitter with FCC ID: AZ489FT7010, EA 570732, EA635463, TC737053 and TC299967. Dear Sir or Madam: Motorola Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein requests that its Class II Permissive Change application for the subject transmitter be withdrawn. We have decided to withdraw the Class II P/C for now and will re-submit at a later date with the appropriate SAR Reports. Please note that we are requesting that the original grants remain in effect. Contact Mike Ramnath at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance E-mail: [email protected]

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA Date: 29 th March 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Withdraw Dismissal Request FCC ID: AZ489FT7010, TC737053, TC299967. Dear Sir or Madam: Motorola Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein requests that its Dismissal Request for the subject transmitter be withdrawn. We have decided to withdraw the Dismissal Request for the original applications. The initial request was inadvertently submitted. Please note that we are requesting that the original grants remain in effect. Contact Mike Ramnath at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance E-mail: [email protected]

July 7, 2006 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 29254 Request for Tech. Info.: 06/09/2006 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated June 9, 2006. 1. Please note that we cannot update the 731 Form Item 14 to “ has been granted under FCC ID: IHDT56DB1”. Please note that we are in correspondence with EASAdmin. 2. Therefore, we request an extension of 30 additional days to resolve this issue. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

PCTEST Engineering Laboratory, Inc. 6660 Dobbin Road Suite A-E Columbia, Maryland 21045-4844 Tel.: 410-290-6652 / Fax: 410-290-6654 July 11, 2006 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 29346 Request for Tech. Info.: 06/13/2006 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated June 13, 2006. 1. Please note that we have uploaded a revised SAR report. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

PCTEST Engineering Laboratory, Inc. 6660 Dobbin Road Suite A-E Columbia, Maryland 21045-4844 Tel.: 410-290-6652 / Fax: 410-290-6654 July 25, 2006 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 30416/ 30417 Request for Tech. Info.: 07/25/2006 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated July 25, 2006. 1. Please note that we have uploaded a revised SAR report without co-transmission. 2. Please find attached SAR Test Setup Photos. We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

PCTEST Engineering Laboratory, Inc. 6660 Dobbin Road Suite A-E Columbia, Maryland 21045-4844 Tel.: 410-290-6652 / Fax: 410-290-6654 July 26, 2006 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Mr. Tim Harrington SUBJECT: Motorola Inc. FCC ID: AZ489FT7010 731 Confirmation No.: TC299967 Correspondence Reference No.: 30493 Request for Tech. Info.: 07/26/2006 Dear Tim: Transmitted herewith, on behalf of Motorola Inc is an amendment provided in response to the request for technical information dated July 26, 2006. 1. Please note that we request the maximum SAR listed on the Grant of Authorization be updated to read “Body: 0.58 W/kg”. 2. We also request that the following grant condition be added: “ SAR compliance for body-worn operation is limited to the specific configurations tested in this filing.” We trust this information is sufficient to resolve FCC questions in this application. If you have any further questions, please do not hesitate to contact us. cc: Motorola Inc.

Motorola Inc. FCC ID: AZ489FT7010 Exhibit 3 Page 1 of 5 EXTERNAL PHOTOGRAPHS This document contains 4 photographs Motorola Inc. FCC ID: AZ489FT7010 Exhibit 3 Page 2 of 5 Photograph No.1 XPad terminal front view Motorola Inc. FCC ID: AZ489FT7010 Exhibit 3 Page 3 of 5 Photograph No.2 XPad terminal rear side view with battery removed Motorola Inc. FCC ID: AZ489FT7010 Exhibit 3 Page 4 of 5 Photograph No.3 Top View of Terminal and Imager used to picture barcodes Motorola Inc. FCC ID: AZ489FT7010 Exhibit 3 Page 5 of 5 Photograph No.4 End View of Terminal and IrDA port used in the Office Dock

Applicant: Motorola, Inc. FCC ID: AZ489FT7010 Exhibit 1 EXHIBIT 1. . FCC Identification Label -- Pursuant to 47 CFR 2.1033(b)(7) FCC ID: AZ489FT7010 Identifier label for the model: F4423A Applicant: Motorola, Inc. FCC ID: AZ489FT7010 Exhibit 1 Label Location: Back side of the terminal. Applicant: Motorola, Inc. FCC ID: AZ489FT7010 Exhibit 1 EXHIBIT 1A. General Information --- 47 CFR 2.1031. 1A.1. Production Plans -- Pursuant 47 CFR 2.1031 Quantity production is planned. 1A.2. Application References -- Pursuant to 47 CFR 2.948 and 2.1061 Reference is made to the following Motorola "Application References" Hermon Labs…

Text truncated - open the document above for the full version.