AZ489FT7017Handheld Computer with iDEN, WLAN and Bluetooth

HC700-i Handheld Computer Model F3130A User Manual a Enhanced IMD Users.book Page 1 Tuesday, September 26, 2006 2:17 PM Enhanced IMD Users.book Page 2 Tuesday, September 26, 2006 2:17 PM i COMPUTER SOFTWARE COPY- RIGHTS The Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductor memo- ries or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copy- righted computer program. Accordingly, any copyrighted Motorola com- puter programs contained In the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by impli- cation, estoppel. or otherwise. any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, roy- alty free license to use that arises by operation of law in the sale of a prod- uct. EPS – 34440- B This warranty applies within the fifty (50) United States, the District of Columbia and Canada. Document Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. Commercial Warranty Limited Warranty MOTOROLA COMMUNICATION PROD- UCTS I. What This Warranty Covers And For How Long MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manu- factured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: HC700-i unitOne (1) Year Product AccessoriesOne (1) Year Enhanced IMD Users.book Page i Tuesday, September 26, 2006 2:17 PM ii Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the war- ranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the bal- ance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product man- ufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, mainte- nance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, cov- erage, or operation of the system as a whole under this warranty. II. General Provisions This warranty sets forth the full extent of MOTOROLA’s responsibili- ties regarding the Product. Repair, replacement or refund of the pur- chase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WAR- RANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMI- TATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. State Law Rights SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA- TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMI- TATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. Enhanced IMD Users.book Page ii Tuesday, September 26, 2006 2:17 PM iii IV. How To Get Warranty Service You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insur- ance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola at 1-888-567-7347 US/Canada. V. What This Warranty Does Not Cover A. Defects or damage resulting from use of the Product in other than…

Text truncated - open the document above for the full version.

1 Product Sa fety and RF Exposure for Portable Two-Way Radios. HC700-i R F E nergy Expos ure Awareness and Cont rol Handheld Computer In form ation and Operati onal Instr uctio ns for Occ upati onal Use Note: This radio is intend ed for use in occ upat ional/ con trolled cond ition s where users have f ull knowledge of their ex po sure a nd can exerc ise control over t heir ex posure to meet t he occ upational limits in FCC /ICN IRP a nd Inter national standar ds. This ra dio dev ice is N OT autho rized for general popu lation con- sumer use This two-wa y rad io use s elec tromagne tic energ y in the radio frequen cy (RF) spe ctrum to pro vide co mmunic ations be tween two or more user s over a dis tance . It uses radio frequenc y (R F) energy o r radio wa ves to send and receive calls . RF energy is one form of elec tromagne tic energ y. Other for ms include , but are n ot limited to, sun ligh t an d x-rays . RF energ y, howeve r, should no t be con fused with these o ther form s of ele ctromagne tic energ y, which when use d imp roperl y, can cau se biological damage . Ver y high levels o f x-rays , for exa mple, can damage tissues and gene tic materia l. Exper ts in s cien ce, engineering , med icine , heal th, and indus try wor k with organi zations to develop s tandards for safe exposu re to R F energ y. Thes e standard s pr ovide recommended le vels of RF expo sure for bo th wor kers and the gene ral public . These reco mmend ed R F exposur e levels include subs tan tial margin s of pro tection. All Mo torola two-wa y radio s are designed , manu factured , Government & Enterprise Mobility Solutions and tested to ensu re they mee t go vernmen t-established 1301 E. Algonquin Road, Schaumburg, IL 60196 R F exposure levels . In addition , manu facturer s also Copyright © 2005 Motorola All Rights Reserved. re commend speci fic opera ting ins tructions to use rs o f two- 6802979C63-A wa y radio s. BEFORE USING THIS RADI O, READ TH IS BO OKLET WHICH CON TAINS IMPORTANT O PERATING INSTRUCT IONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTR OL INF ORMATION AND O PERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMI TS IN A PPLICABLE NATIONAL AND INT ERN ATIONAL STAN DARD S. AL SO READ THE OPERATIONAL INSTRUCT IONS FOR SAFE USAG E. ! C a u t i o n 17B25_B_Text_EN.fm Page 1 Thursda y, Octo ber 14, 2004 3:44 PM @6802979C63@ AB November, 2005 2 These instructions are important because they inform users about RF energy expos ure and provide simple procedures on how to control it.Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission (FCC) Regulations (US markets only)The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable two-way radios before they can be marketed in the U.S. When two-way radios are used as a c onsequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Do not remove this RF Exposure Label from the device. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Com plian ce with RF Ex pos ure Sta ndar ds Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF expo sure environ ments. 17B25_B_Text_EN.fm Page 2 Thursday, October 14, 2004 3:44 PM 3 Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard, 2003 • ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limitation of exposure to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to resolution # 303 from July 2, 2002" RF Exposure Compliance and Control Guidelines and Operating InstructionsTo control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures: Guide line s: • User awareness instructions should accompany device when transferred to other users. • Do not use this device if the operational requirements described herein are not met. Operating Instruction s • Whe n worn on the bo dy, alwa ys place the radi o in a Mo tor ola-a ppr oved clip, h olde r, hol ster, case, o r bod y ha rne ss for thi s pro duct. Using ap proved b ody-wor n accessorie s is impor tan t be cause the use of no n-Mo torola- appr oved accessorie s ma y result in expo sure le vel s, which exceed t he I EEE /I CNIRP occ upational/con trol led en vironme nt R F exposure lim its. • If you are not using a body -worn acce ssory and are no t using the ra dio in…

Text truncated - open the document above for the full version.

Motorola Inc FCC ID: AZ489FT7017 Exhibit 2 Page 1 of 1 Exhibit 2: Statement of Certification—Pursuant to 47 CFR 2.907 The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications: B.Sc in Electrical Engineering, 2001 Tel Aviv university Institute of Technology 4 years experience in RF design. NAME: Aviv Shachar SIGNATURE: /s/ Aviv Shachar (signed) DATE: October. 15 2006 POSITION: HC700G RF engineering I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. NAME: Pnini Nissim SIGNATURE: /s/ Pnini Nissim (signed) DATE: October. 15 2006 POSITION: HC700G Project Manager

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA Date: 9 th November 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT7017, HC700i. Dear Sir or Madam: Motorola Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein submits its application for Certification of the subject transmitter. Please find the attached application for Certification of the HC700i, which contains Bluetooth, WLAN and iDEN/WiDEN transmitters, operating with a maximum transmit power of 2.09mW for Bluetooth at the frequency range 2.402-2.48GHz; 39.8mW for WLAN b and 31.6mW for WLAN g at the frequency range 2412-2462MHz; iDEN/WiDEN: 0.7W at the frequency ranges 806-825MHz, 896-901MHz. The iDEN/WiDEN (both bands) and WLAN transmitters do not work simultaneously. The product testing was performed by QualitiTech Laboratories, which is listed by the FCC under Registration Numbers 102724 and IC 46405-4808. A complete Certification application is enclosed, contact Mike Ramnath at (954) 723-5793 or Fax (954) 723-4794 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13a

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA FCC ID: AZ489FT7017 Date: 9 th November 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ489FT7017, HC700G. Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune-Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos) and Exhibit 9 (Internal Photos) as Temporary Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” And Exhibit 3 and 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13b

FCC ID: AZ489FT7017 Date: 15 th December 2006 Gregory Czumak PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 Re: Correspondence Number AZ40662 with FCC ID: AZ489FT7017. Dear Mr. Czumak; Motorola Inc., 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322, herein submits its response to the 5 th December 2006 request for information in Correspondence Number AZ40734. Q1. Please verify that the FCC ID label will be visible at the time of purchase (i.e., it will not be sold with the battery already installed). R1. See the attached FCC Label justification letter and amended Exhibit 1. Q2. Please address the following 4 requirements for frequency hopping spread spectrum transmitters (Bluetooth) from Section 15.247(a)(1): a. Is the hopping sequence pseudorandom? Yes b. Are all channels used equally on average? Yes c. Does the receiver input bandwidth approximately equal the transmit bandwidth? Yes d. Does the receiver hop in sequence with the transmit signal? Yes R2. BT radio for HC700G has been certified by Bluetooth Qualification Lab. See the attached approval. Q3. Please address Sections 15.247(g) and (h) for the Bluetooth transmitter. R3. We comply to Sections 15.247(g) and (h) and BT and WLAN radios are hopping independently and randomly. Q4. Please submit data for radiated emissions in the Restricted Bands for both the Bluetooth and WLAN transmitters on their mid channels (only hi and low channel data was included in the test report). R4. See attached supplemental Test Report. Q5. Is the Bluetooth capable of EDR mode? If so, please submit 20 dBc bandwidth and bandedge plots in this mode. R5. The plots submitted are for this mode, the only mode of operation. Q6.Please provide the following worst case SAR plots: 800 MHz band: RH touch and tilt, LH tilt; 900 MHz band: RH touch and tilt, LH touch and tilt, body; WLAN (2450 MHz band) body. FCC ID: AZ489FT7017 R6. Appendix A of this correspondence includes the additional SAR plots that you are requested. These are the coarse to cube scans (also called Motorola fast SAR for DASY4 evaluation method) as noted in the SAR report section 7.1 DUT Configuration(s): a coarse-to-cube approximation methodology was utilized to determine the worst-case SAR performance configuration for each applicable body location. The test configurations that produced the highest SAR results for each body position using the coarse-to-cube approximation methodology were assessed using the full DASY4™ coarse and 7x7x7 cube scans. Q7. The 800 MHz LH touch SAR plot apparently used the conversion factor for body. Please recalculate this SAR level using the appropriate conversion factor. R7. The scan has been corrected with the appropriate conversion factor for head and the SAR level has been recalculated. The results of the recalculated SAR level indicated that there is no change in the final results. The corrected plot for this scan is indicated in the revised SAR report (Rev. A) part 2 of 2. Q8. The LH touch SAR test in the 800 MHz band was performed on 10/11/06. Please submit system check test results for this band (head) for this day. R8. According to the FCC Supplement C, OET Bulletin 65- Appendix D (page 43), the system verification section indicated that “...a source operating within 100MHz of the mid-band channel of each operating mode may be used.” The System Performance Check on 10/11/06 was done at the 900MHz which is within 100MHz from the center frequency of the 806-825MHz band. Therefore, the system performance check at 900MHz is applicable for both 800MHz and 900MHz bands. Q9. We note that Qualitech is listed on the A2LA website as being accredited to ISO/IEC 17025 for calibration only. Please submit documentation showing that Qualitech has also been accredited to ISO/IEC 17025 as a test lab (the accreditation number on their A2LA logo does not match that shown on the A2LA website). R9. See the attached A2LA Certificate. Q10. Please note that in Section 6.2 (p.8/36) of the first SAR report, the values in the System Performance and Reference SAR columns are reversed. R10. The SAR report has been revised to correct the information on this section. Q11. FYI: page 7 of the first SAR report lists 2 dipoles as being past their cal due dates, however, the actual cal reports show otherwise. R11: The SAR report has been revised to correct the information on this section. Q12. FYI: the DoC logo, for the pc portion of the EUT, must be placed on the label. Contact me at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Email: [email protected]

Applicant: Motorola Inc. FCC ID: AZ489FT7017 Exhibit 3 Page 1 of 4 EXTERNAL PHOTOGRAPHS This document contains 3 photographs Applicant: Motorola Inc. FCC ID: AZ489FT7017 Exhibit 3 Page 2 of 4 Photograph No.1 HC700i front view Applicant: Motorola Inc. FCC ID: AZ489FT7017 Exhibit 3 Page 3 of 4 Photograph No.2 HC700i rear view Applicant: Motorola Inc. FCC ID: AZ489FT7017 Exhibit 3 Page 4 of 4 Photograph No.3 HC700i rear view without battery and with label

Applicant: Motorola, Inc. FCC ID: AZ489FT7017 Exhibit 1 Page 1 of 3 EXHIBIT 1: FCC IDENTIFICATION LABEL Required Under Section: 47 CFR 2.1033(b)(2), 2.1033(b)(7) FCC ID: AZ489FT7017 Identifier label for the model: F3130A/F3162A Applicant: Motorola, Inc. FCC ID: AZ489FT7017 Exhibit 1 Page 3 of 3 EXHIBIT 1A: General Information --- 47 CFR 2.1031. 1A.1. Production Plans -- Pursuant 47 CFR 2.1031 Quantity production is planned. 1A.2. Application References Reference is made to the following Motorola "Application References" 1. Part 15.247 Intentional Radiators and their application 1A.3. Data Submittal Procedure Data located in Exhibit 6 is supplied in accordance with Part 2, Subpart J, Part 90 and Part 15, subpart C of the Commissions ’ rules and will be submitted electronically. 1A.4. Application References: Pursuant to 47 CFR 2.948 and 2.1061 Reference is made to the following Motorola "Application References" QualiTech EMC laboratory is located at 30 Hasivim St, Petah-Tikva, 49517, Israel. 1. FCC OATS registration number is: 102724 2. Industry Canada OATS registration number is: IC 46405-4808 3. Accredited by A2LA. - 16330.1 EXHIBIT 13C SHEET 1 FCC ID: AZ489FT7017 Date: 15 st December 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Labelling Proposal for Transmitter with FCC ID: AZ489FT7017. Dear Sir / Madam, Motorola Inc., 8000 West Sunrise Blvd., Fort Lauderdale, FL, herein submits it’s Labelling Proposal for the Transmitter with FCC ID: AZ489FT7017. Motorola complies to FCC Rule Part 2.925 (d) that the label is permanently affixed and is readily visible to the purchaser at the time of purchase”. Further, at the time of purchase, batteries are shipped in another section or compartment of the radio packaging and are not attached to the radio. In some instances they may be shipped in separate boxes. So, the customer needs to physically install the battery by removing the battery cover, if any, or attach the battery before using the radio. Hence, the FCC label would be visible to the user every time he goes through that exercise! Thus meeting the requirement of FCC Rule Part 2.925 (d). Further, the placement of the label in the battery compartment is done because space is limited on the exterior of the device. The battery compartment also helps to protect the label from getting obliterated or made unreadable through regular handling and use. It also helps when to further protect the label when it is being used in hazardous situations. Please contact me at 954-723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Mike Ramnath Manager, Regulatory Compliance Email: [email protected]

Motorola Inc. FCC ID: AZ489FT7017 Exhibit 9 Page 1 of 6 INTERNAL PHOTOGRAPHS This document contains 9 photographs Motorola Inc. FCC ID: AZ489FT7017 Exhibit 9 Page 2 of 6 Photograph No.1 HC700i Internal View Photograph No. 2 Main Board Motorola Inc. FCC ID: AZ489FT7017 Exhibit 9 Page 3 of 6 Photograph No.3 iDEN Antenna Photograph No.4 BT Module with Antenna Motorola Inc. FCC ID: AZ489FT7017 Exhibit 9 Page 4 of 6 Photograph No.5 Bluetooth module without shield Photograph No.6 WLAN module with shield Motorola Inc. FCC ID: AZ489FT7017 Exhibit 9 Page 5 of 6 Photograph No.7 WLAN Module Photograph No.8 iDEN module Board Motorola Inc. FCC ID: AZ489FT7017 Exhibit 9 Page 6 of 6 Photograph No.9 Imager

E E E l l l e e e c c c t t t r r r o o o m m m a a a g g g n n n e e e t t t i i i c c c C C C o o o m m m p p p a a a t t t i i i b b b i i i l l l i i i t t t y y y T T T e e e s s s t t t R R R e e e p p p o o o r r r t t t T T T e e e s s s t t t R R R e e e p p p o o o r r r t t t N N N o o o : : : M M M O O O T T T 1 1 1 8 8 8 1 1 1 0 0 0 0 0 0 6 6 6 Issued on: October 18, 2006 P P P r r r o o o d d d u u u c c c t t t N N N a a a m m m e e e H H H C C C 7 7 7 0 0 0 0 0 0 - - - i i i D D D e e e n n n M M M o o o d d d e e e l l l : : : F F F 3 3 3 1 1 1 3 3 3 0 0 0 A A A , , , F F F 3 3 3 1 1 1 6 6 6 2 2 2 A A A F F F C C C C C C I I I D D D : : : A A A Z Z Z 4 4 4 8 8 8 9 9 9 F F F T T T 7 7 7 0 0 0 1 1 1 7 7 7 I I I C C C : : : 109 109 109 U U U - - - 8 8 8 9 9 9 F F F T T T 7 7 7 0 0 0 1 1 1 7 7 7 T T T e e e s s s t t t e e e d d d A A A c c c c c c o o o r r r d d d i i i n n n g g g t t t o o o F F F C C C C C C 4 4 4 7 7 7 C C C F F F R R R P P P a a a r r r t t t 1 1 1 5 5 5 , , , S S S u u u b b b p p p a a a r r r t t t s s s B B B & & & C C C F F F C C C C C C 4 4 4 7 7 7 C C C F F F R R R , , , P P P a a a r r r t t t 9 9 9 0 0 0 & & & P P P a a a r r r t t t 1 1 1 5 5 5 . . . 2 2 2 4 4 4 7 7 7 I I I n n n d d d u u u s s s t t t r r r y y y C C C a a a n n n a a a d d d a a a I I I C C C E E E S S S - - - 0 0 0 0 0 0 3 3 3 , , , R R R S S S S S S - - - 1 1 1 1 1 1 9 9 9 , , , a a a n n n d d d R R R S S S S S S - - - 2 2 2 1 1 1 0 0 0 T T T e e e s s s t t t s s s P P P e e e r r r f f f o o o r r r m m m e e e d d d f f f o o o r r r M M M o o o t t t o o o r r r o o o l l l a a a I I I s s s r r r a a a e e e l l l L L L t t t d d d . . . 3, Kremenitski Street, Tel Aviv, Israel Tel: (972) 3-565 9581 Q Q Q u u u a a a l l l i i i T T T e e e c c c h h h E E E M M M C C C L L L a a a b b b o o o r r r a a a t t t o o o r r r y y y 30 Hasivim St, Petah-Tikva, 49517, Israel Tel: 972-3-926 8443 Fax: 972-3-928 7490 1633.01 Test Report: MOT 181006 Date: 18.10.2006, Rev. 1 Motorola Israel Ltd. Page 2 of 161 HC700-i EMC Lab The information contained herein is the property of QualiTech, EMC Lab and is supplied without liability for errors or omissions. The copyright for this document vests in QualiTech, EMC Lab. All rights reserved. This Test Report may not be reproduced, by any method, without the written permission of the QualiTech, EMC Lab. If and when such permission is granted, the report must be reproduced only in the full format. T T T e e e s s s t t t p p p e e e r r r s s s o o o n n n n n n e e e l l l Tests Performed By: ------------------------------------------ Rami Nataf Report Prepared By: ----------------------------------------- Bina Talkar Report Reviewed By: ----------------------------------------- Y. Zucker QA and Lab. Manager QualiTech EMC Laboratory 1633.01 Test Report: MOT 181006 Date: 18.10.2006, Rev. 1 Motorola Israel Ltd. Page 3 of 161 HC700-i EMC Lab A A A s s s s s s e e e s s s s s s m m m e e e n n n t t t i i i n n n f f f o o o r r r m m m a a a t t t i i i o o o n n n : : : This report contains an assessment of the EUT against Electromagnetic Compatibility based upon tests carried out on the samples submitted. The results contained in this report relate only to the items tested. Manufactured products will not necessarily give identical results due to production and measurement tolerances. QualiTech, EMC Lab does not assume responsibility for any conclusion and generalization drawn from the test results with regards to other specimens or samples of type of the equipment represented by test item. The EUT was set up and exercised using the configuration, modes of operation and arrangements defined in this report only. M M M o o o d d d i i i f f f i i i c c c a a a t t t i i i o o o n n n s s s : : : Modifications made to the EUT None. Modifications made to the Test Standard None. Test Report: MOT 181006 Date: 18.10.2006, Rev. 1 Motorola Israel Ltd. Page 4 of 161 HC700-i EMC Lab S S S u u u m m m m m m a a a r r r y y y o o o f f f C C C o o o m m m p p p l l l i i i a a a n n n c c c e e e S S S t t t a a a t t t u u u s s s Bluetooth: FCC 47 CFR, Part 15, Subparts B & C, RSS- 210 Annex.8 Issue 6 Test Spec. Clause Test Case Remarks §15.247 (a) (1) & RSS-210 section A8.1 (2) Carrier Frequency Separation Pass §15.247 (a) (1)(iii) & RSS-210 section A8.1 (3) Number of Hopping Channels Pass §15.247 (a) (1)(iii) & RSS-210 section A8.1 (4) Time Occupancy (Dwell Time) Pass §15.247 (a) (1) (ii) & RSS-210 section A8.1 (1) Spectrum Bandwidth of a FHSS system/ Maximum 20dB BW Pass §15.247 (b) (1) & RSS-210 section A8.4 (2) Maximum Peak Output Power Pass §15.247 (d) & RSS-210 section A8.5 Band-Edge compliance of RF Conducted Emission Pass §15.205 & RSS-210 section A8.5 Radiated Emission, Restricted Bands Pass §15.247 (d) & RSS-210 section A8.5 Spurious Emission Conducted Pass §15.247 (d) & RSS-210 section A8.5 Spurious Emission Radiated Pass §15.109 & ICES-003, RSS-GEN, Section 7.2.3.2 Radiated Emission (receiver) Pass §15.203 & RSS-Gen, Section 7.1.4 Antenna Connector requirement Pass WLAN: 802.11b/g: FCC 47 CFR Part 15, Subparts B & C, RSS- 210 Annex.8 Issue 6 Test Spec. Clause Test Case Remarks §15.247 (a) (2) & RSS-210 section A8.2 (1) 6 dB Bandwidth Pass §15.247 (b) (3) & RSS-210 section A8.4 (4) Peak Output Power Pass §15.247 (e) & RSS-210 Section A8.2 (2) Peak Power Spectral Density Pass §15.247 (d) & RSS-210 Section A8.5 Conducted Spurious Emissions Pass §15.247 (d) & §15.205 Radiated Spurious Emissions, Restricted Bands (2310- 2390MHz, 2483.5-2500MHz) Pass §15.247 (d) & §15.205 & RSS-210 section A8.5 Radiated Emissions, Restricted Bands Pass §15.209& RSS-210 section A8.5 Radiated Emissions (Receive mode) Pass §15.203 & RSS-Gen. Section 7.1.4 Antenna Connector requirement Pass Test Report: MOT 181006 Date: 18.10.2006, Rev. 1 Motorola Israel Ltd. Page 5 of 161 …

Text truncated - open the document above for the full version.