AZ489FT7028Handheld Computer with WLAN and Bluetooth

User Manual HC700-L Handheld Computer Model F3129AG ab Main Menu Enhanced IMD Users.book Page 1 Monday, October 23, 2006 1:48 PM Enhanced IMD Users.book Page 2 Monday, October 23, 2006 1:48 PM i COMPUTER SOFTWARE COPY- RIGHTS The Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductor memo- ries or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copy- righted computer program. Accordingly, any copyrighted Motorola com- puter programs contained In the Motorola products described in this instruction manual may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by impli- cation, estoppel. or otherwise. any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive, roy- alty free license to use that arises by operation of law in the sale of a prod- uct. EPS – 34440- B This warranty applies within the fifty (50) United States, the District of Columbia and Canada. Document Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. Commercial Warranty Limited Warranty MOTOROLA COMMUNICATION PROD- UCTS I. What This Warranty Covers And For How Long MOTOROLA INC. (“MOTOROLA”) warrants the MOTOROLA manu- factured Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below: HC700-L unitOne (1) Year Product AccessoriesOne (1) Year Enhanced IMD Users.book Page i Monday, October 23, 2006 1:48 PM ii Motorola, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the war- ranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the bal- ance of the original applicable warranty period. All replaced parts of Product shall become the property of MOTOROLA. This express limited warranty is extended by MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product man- ufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, mainte- nance or service of the Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, MOTOROLA disclaims liability for range, cov- erage, or operation of the system as a whole under this warranty. II. General Provisions This warranty sets forth the full extent of MOTOROLA’s responsibili- ties regarding the Product. Repair, replacement or refund of the pur- chase price, at MOTOROLA’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WAR- RANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMI- TATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. State Law Rights SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITA- TION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMI- TATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. This warranty gives specific legal rights, and there may be other rights which may vary from state to state. Enhanced IMD Users.book Page ii Monday, October 23, 2006 1:48 PM iii IV. How To Get Warranty Service You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insur- ance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola through one of its authorized warranty service locations. If you first contact the company which sold you the Product, it can facilitate your obtaining warranty service. You can also call Motorola at 1-888-567-7347 US/Canada. V. What This Warranty Does Not Cover A. Defects or damage resulting from use of the Product in other than…

Text truncated - open the document above for the full version.

Please retain for future use 6802978C77-A September, 2005 @6802978C77@ Commercial, Government and Industrial Solutions Sector 1301 E. Algonquin Road, Schaumburg, IL 60196 Copyright © 2005 Motorola All Rights Reserved. Product Safety and RF Energy Exposure Booklet for Portable Data Computers with Two-Way Radios This two-way radio handheld data computer uses electromagnetic energy in the ra- dio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and re- ceive information. RF energy is one form of electromagnetic energy. Other forms in- clude, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used im- properly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organiza- tions to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radio products are designed, manufactured, and tested to en- sure they meet government-established RF exposure levels. In addition, manufac- turers also recommend specific operating instructions to users of two-way radio products. These instructions are important because they inform users about RF en- ergy exposure and provide simple procedures on how to control it. Please refer to the following websites for more information on what RF energy ex- posure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html HANDHELD DATA COMPUTER WITH RADIO - PRODUCT OPERA- TION AND EME EXPOSURE Your Motorola two-way radio device complies with the following RF energy exposure standards and guidelines: •United States Federal Communications Commission, Code of Federal Regula- tions; 47CFR part 2 sub-part J •American National Standards Institute (ANSI) / Institute of Electrical and Elec- tronic Engineers (IEEE) C95. 1-1992 •Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition •International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 •Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 •Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard, 2003 • ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limita- tion of exposure to electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and 300 GHz" and "Attachment to resolution # 303 from July 2, 2002" BEFORE USING THIS DATA RADIO COMPUTER, READ THIS BOOK- LET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS FOR COMPLI- ANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE USAGE. HANDHELD COMPUTER HC700 L ab CAUTION Operating Instructions When worn on the body, always place the handheld data computer in a Motor- ola-approved clip, holder, holster, case, or body harness for this product. Using approved bodyworn accessories is important because the use of non- Motorola-approved accessories may result in exposure levels, which exceed the FCC environment RF exposure limits. Approved Accessories Use only Motorola-approved supplied or replacement batteries and accessories. Use of Non-Motorola approved batteries and accessories may exceed the FCC (IEEE) and ICNIRP RF exposure guidelines. For additional information on exposure requirements or other training information, visit http://www.motorola.com/rfhealth. Electromagnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnet- ic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your handheld data computer in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to exter- nal RF energy. Aircraft When instructed to do so, turn off your handheld data computer when on board an aircraft. Any use of a handheld data computer must be in accordance with applicable regulations per airline crew instructions. Medical Devices Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 centimeters) be maintained between a hand- held wireless radio and a pacemaker. These recommendations are consistent with Persons with pacemakers should: •ALWAYS keep the handheld data computer more than 6 inches (15 centime- ters) from their pacemaker when the radio is turned ON. •Not carry the handheld data computer in the breast pocket. •Use the ear opposite the pacemaker to minimize the potential for interference. •Turn the handheld data computer OFF immediately if there is any reason to suspect that interference is taking place. • Hearing Aids Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your de- vice to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use of Communication Devices While Driving Always check …

Text truncated - open the document above for the full version.

Motorola Inc FCC ID: AZ489FT7028 Exhibit 2 Exhibit 2. Statement of Certification—Pursuant to 47 CFR 2.907 The technical data supplied with this application, having been taken under my supervision is hereby duly certified. The following is a statement of my qualifications: B.Sc in Electrical Engineering, 2001 Holon University Institute of Technology 4 years experience in RF design. NAME: Cohen-Zedek Erez SIGNATURE: /s/ Cohen-Zedek Erez (signed) DATE: November 07, 2006 POSITION: HC700G RF Engineering I hereby certify that the above application was prepared under my direction and that to the best of my knowledge and belief, the facts set forth in the application and accompanying technical data are true and correct. NAME: Elkoby Motti SIGNATURE: /s/ Elkoby Motti (signed) DATE: November 07, 2006 POSITION: HC700G RF Project Manager

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA 30 th November 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT7028, Handheld Computer: F3129AG. Dear Sir or Madam: Motorola is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune-Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d) and Section 552(b)(4) of the Freedom of Information Act. We are also requesting that the FCC mark Exhibit 3 (External Photos), and Exhibit 9 (Internal Photos) as Temporary Confidentiality as outlined in Public Notice DA 04-1705, dated June 15, 2004. This provision will give Motorola temporary confidentiality prior to product launch. Please mark Exhibits 4, 5, 10, and 12 as “Confidential” and Exhibits 3 and 9 as “Temporary Confidential”. Please contact me if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] EXHIBIT 13b

8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA Date: 30 th November 2006 Authorization & Evaluation Division Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT7028. HC700L – Handheld Computer, Model Number F3129AG. Dear Sir or Madam: Motorola Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein submits its application for Certification of the subject transmitter. Please find the attached application for Certification of the Handheld Computer which contains Bluetooth and WLAN 802.11 b/g transmitters, operating with a maximum transmit power: 1. 2mW for Bluetooth. 2. 39.8mW for WLAN b. 3. 31.6 mW for WLAN g. The product testing was performed by QualitiTech Laboratories, which is listed by the FCC under Registration Numbers 102724 and IC 46405-4808. A complete Certification application is enclosed, contact me at (954) 723-5793 or Fax (954) 723-4794 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected] 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322. USA EXHIBIT 13a

FCC ID: AZ489FT7028 Date: 13 th December 2006 Gregory Czumak PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 Re: Correspondence Number AZ40782 with FCC ID: AZ489FT7028. Confirmation Number: 12010782-83 Dear Mr. Czumak; Motorola Inc., 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322, herein submits its response to the 7 th December 2006 request for information in Correspondence Number AZ40782. 1: Please address the following 4 requirements for frequency hopping spread spectrum transmitters (Bluetooth) from Section 15.247(a)(1): a. Is the hopping sequence pseudorandom? Yes b. Are all channels used equally on average? Yes c. Does the receiver input bandwidth approximately equal the transmit bandwidth? Yes d. Does the receiver hop in sequence with the transmit signal? Yes 2: Please address Sections 15.247(g) and (h) for the Bluetooth transmitter. BT radio for HC700G has been certified by Bluetooth Qualification Lab. Please see the attached approval. 15.247(g): In accordance with the Bluetooth Industry Standard, the system is designed to comply with all of the regulations in Section 15.247 when the transmitter is presented with a continuous data (or information) stream. We comply. 15.247(h): In accordance with the Bluetooth Industry Standard, the system does not coordinate its channel selection/hopping sequence with other frequency hopping systems for the express purpose of avoiding the simultaneous occupancy of individual hopping frequencies by multiple transmitters. We comply. BT and WLAN radios are hopping independently and randomly. 3. Please submit data for radiated emissions in the Restricted Bands for both the Bluetooth and WLAN transmitters on their mid channels (only hi and low channel data was included in the test report). See Public Notice DA 00-705: "Band-edge compliance: capture the peak level of the emission operating on the channel closest to the FCC ID: AZ489FT7028 band edge, as well as any modulation product...etc" in other words, operating on highest and lowest frequencies only, as presented in the test report-Ex6. 4. Is the Bluetooth capable of EDR mode? If so, please submit 20 dBc bandwidth and bandedge plots in this mode. The plots submitted are for this mode, the only mode of operation. 5. The RFx Exhibit references a belt holster (model FTN6839A). Does this holster provide at least 2.5 cm of spacing from the body? If it does not, then, in accordance with the 2002 TCB Exclusion List and based on the output power of the WLAN transmitter, SAR must be tested in order for a TCB to issue the grant of certification. Therefore, if the referenced holster does not provide at least 2.5 cm of spacing from the body, please either submit a full SAR test report, or else inform us if you will be filing this application with the FCC. We are confirming that the Holster is 3 cm from the body. See attached drawing of the Holster. 6. We note that Qualitech is listed on the A2LA website as being accredited to ISO/IEC 17025 for calibration only. Please submit documentation showing that Qualitech has also been accredited to ISO/IEC 17025 as a test lab (the accreditation number on their A2LA logo does not match that shown on the A2LA website). See A2lA Certificate # 1633-01. 7. FYI: please note that, if the body worn holster does provide at least 2.5 cm of spacing from the body, then we will not be uploading the SAR Assessment Exhibit to the FCC, since (a) SAR testing would not be required (see question #5), and (b) the FCC does not permit TCB’s to evaluate SAR computations (measurements only). Contact me at (954) 723-5793 if you require any additional information. Sincerely, /s/ Mike Ramnath (signed) Manager, Regulatory Compliance Email: [email protected]

Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 1 of 7 EXTERNAL PHOTOGRAPHS This document contains 7 photographs Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 2 of 7 Photograph No.1 HC700L (F3129AG) front view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 3 of 7 Photograph No.2 HC700-L (F3129AG) rear side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 4 of 7 Photograph No.3 HC700-L (F3129AG) top view Photograph No.4 HC700-L (F3129AG) bottom view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 5 of 7 Photograph No.4 HC700-L (F3129AG) right side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 6 of 7 Photograph No.4 HC700-L (F3129AG) left side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 3 Page 7 of 7 Photograph No.7 HC700-L (F3129AG) with battery pack removed view

Motorola Inc FCC ID: AZ489FT7028 Exhibit 1 Page 1 of 3 Exhibit 1: FCC Identification Label -- Pursuant to 47 CFR 2.1033(b)(7) 1.1. Location Back side of the HC700-L under the battery pack Please note that Motorola complies with FCC Rule Part 2.925 (d) in that “the label is permanently affixed and is readily visible to the purchaser at the time of purchase”. 1.2. Markings (Text) Enlarged view of label (showing FCC ID and manufacturer type number): Motorola Inc FCC ID: AZ489FT7028 Exhibit 1 Page 3 of 3 Exhibit 1A: General Information 1A.1. Production Plans Quantity production is planned. 1A.2. Application References -- Pursuant to 47 CFR 2.948 and 2.1061 QualiTech EMC laboratory is located at 30 Hasivim St, Petah-Tikva, 49517, Israel. 1. FCC OATS registration number is: 102724 2. Industry Canada OATS registration number is: IC 46405-4808 3. Accredited by A2LA. - 16330.1 1A.3. Data Submittal Procedure Data located in Exhibit 6 is supplied in accordance with Part 2, Subpart J and Part 15, Subpart C, section 15.247 of the Commission’s rules.

Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 1 of 15 INTERNAL PHOTOGRAPHS This document contains 13 photographs Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 2 of 15 Photograph No.1 HC700-L main PCB top side internal view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 3 of 15 Photograph No.2 HC700-L internal view with main PCB removed Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 4 of 15 Photograph No.3 HC700-L front housing removed view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 5 of 15 Photograph No.4 HC700-L display controller view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 6 of 15 Photograph No.5 HC700-L main PCB bottom side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 7 of 15 Photograph No.6 WLAN module front view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 8 of 15 Photograph No.7 WLAN module second side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 9 of 15 Photograph No.8 Bluetooth module without shield Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 10 of 15 Photograph No.9 Photo camera front view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 11 of 15 Photograph No.10 Photo camera rear side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 12 of 15 Photograph No.11 WLAN antenna assembly front view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 13 of 15 Photograph No.12 LCD module rear side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 14 of 15 Photograph No.13 KeyBoard PCB rear side view Motorola Inc. FCC ID: AZ489FT7028 Exhibit 9 Page 15 of 15 Photograph No.14 KeyBoard PCB front side view

FCC ID: AZ489FT7028 SR4521 N&E EME Form-SAR-Rpt-Rev. 5.04 Page 1 of 6 Certificate Number: 2518.01 FCC ID: AZ489FT7028 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 1 of 1 Networks & Enterprise EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Date of Report: 11/7/06 Report Revision: O Report ID: HC700L_F3129AG_Rev O_061107 SR4521 Responsible Engineer: Kim Uong (EME lead Eng.) Date/s Tested: NA – Computational assessment Manufacturer/Location: Motorola South – Arad Israel Sector/Group/Div.: MCIL Date submitted for test: 10/23/06 DUT Description: HC700-L - Handheld Computer with BlueTooth (BT) and WLAN b/g radios Test TX mode(s): NA – Computational assessment Max. Power output: BT: 2.19 mW, WLAN b: 39.8 mW; WLAN g 31.6mW Nominal Power: BT: 1 mW; WLAN: 39.8 mW Tx Frequency Bands: BT: 2402 - 2480MHz WLAN: 2412 - 2462MHz Signaling type: CDMA Model(s) Tested: NA – Computational assessment Model(s) Certified: F3129AG Serial Number(s): NA Classification: General Population/Uncontrolled Rule Part(s): 15; Class B Digitial Device Approved Accessories: Antenna(s): 8489845V01 (Inverted F (on board) - WLAN 2.4GHz - 2.48GHz, 1/4wave, +1.2dBi ) 8489845V01 (Inverted F (on board) - BT 2.4GHz - 2.48GHz, 1/4wave, 0dBi ) Battery(ies): FNN7815A (7.2V Battery, 1800mAH) Body worn accessory(ies): FTN6839A (Belt Holster), FHN6621A (Hand Strap) Audio/Data cable accessory(ies): None Max. Calc. : 1-g Avg. SAR: 0.04 W/kg Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 2.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola EME Laboratory. This reporting format is consistent with the test report guidelines of the TIA TSB-150 December 2004 The results and statements contained in this report pertain only to the device(s) evaluated. Signature on file – Ken Enger Ken Enger N&E EME Lab Senior Resource Manager, Laboratory Director, Approval Date: Certification Date: 11/9/06 Certification No.: L1061103 FCC ID: AZ489FT7028 SR4521 N&E EME Form-SAR-Rpt-Rev. 5.04 Page 2 of 6 1.0 Introduction and Overview...................................................................................... 3 2.0 Referenced Standards and Guidelines ..................................................................... 3 2.1 SAR Limits ................................................................................................... 4 3.0 Description of Device Under Test (DUT) ............................................................... 4 4.0 Rationale for calculation of the compliance results................................................. 5 5.0 Conclusion............................................................................................................... 6 Report Revision History Date Revision Comments 11/7/06 O Initial release FCC ID: AZ489FT7028 SR4521 N&E EME Form-SAR-Rpt-Rev. 5.04 Page 3 of 6 1.0 Introduction and Overview This report details the intended use and the computational assessment used to justify S.A.R. compliance performance of model number F3129A of FCC ID: AZ489FT7028. The results herein reflect initial test results. 2.0 Referenced Standards and Guidelines This product is designed to comply with the following applicable national and international standards and guidelines. • IEC62209-1(2005) Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) • United States Federal Communications Commission, Code of Federal Regulations; Rule Part 47CFR § 2.1093 sub-part J:1999 • Federal Communications Commission, “Evaluating Compliance with FCC Guidelines for Human Exposure to Radio frequency Electromagnetic Fields”, OET Bulletin 65, Supplement C (Edition 01-01), FCC, Washington, D.C.: June 2001. • IEEE 1528, 2003 "Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques" • American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engi- neers (IEEE) C95. 1-1992 • Institute of Electrical and Electronic Engineers (IEEE) C95.1-2005 Edition • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 • Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999 • Australian Communications Authority Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003 • ANATEL, Brazil Regulatory Authority, Resolution No. 303 of July 2, 2002 "Regulation of the limitation of exposure to electrical, magnetic, and electromagnetic fields in the radio frequency range between 9KHz and 300 GHz." and “Attachment to resolution # 303 from July 2, 2002” FCC ID: AZ489FT7028 SR4521 N&E EME Form-SAR-Rpt-Rev. 5.04 Page 4 of 6 2.1 SAR Limits SAR (W/kg) EXPOSURE LIMITS (General Population / Uncontrolled Exposure Environment) (Occupational / Controlled Exposure Environment) Spatial Average - ANSI - (averaged over the whole body) 0.08 0.4 Spatial Peak - ANSI - (averaged over any 1-g of tissue) 1.60 8.0 Spatial Peak – ICNIRP/ANSI - (hands/wrists/feet/ankles averaged over 10-g) 4.0 20.0 Localized SAR - ICNIRP - (Head and Trunk 10-g) 2.0 10.0 3.0 Description of Device Under Test (DUT) The HC700L, FCC ID: AZ489FT7028, is a Handheld Computer. This model utilize the Pocket PC 2003 operating system and include an imbeded 1D/2D imager for barcode scanning. This model incorporates the BlueTooth and WLAN 802.11 b/g transmitters, the maximum percentage transmitting time of WLAN is 0.09%. The max percentage transmitting time of Bluetooth in IMD with Wireless Imager scenario is 0.07%. T…

Text truncated - open the document above for the full version.

E E E l l l e e e c c c t t t r r r o o o m m m a a a g g g n n n e e e t t t i i i c c c C C C o o o m m m p p p a a a t t t i i i b b b i i i l l l i i i t t t y y y T T T e e e s s s t t t R R R e e e p p p o o o r r r t t t T T T e e e s s s t t t R R R e e e p p p o o o r r r t t t N N N o o o : : : M M M O O O T T T 0 0 0 9 9 9 1 1 1 1 1 1 0 0 0 6 6 6 Issued on: November 9, 2006 P P P r r r o o o d d d u u u c c c t t t N N N a a a m m m e e e H H H C C C 7 7 7 0 0 0 0 0 0 L L L - - - H H H a a a n n n d d d h h h e e e l l l d d d C C C o o o m m m p p p u u u t t t e e e r r r M M M o o o d d d e e e l l l : : : F F F 3 3 3 1 1 1 2 2 2 9 9 9 A A A G G G F F F C C C C C C I I I D D D : : : A A A Z Z Z 4 4 4 8 8 8 9 9 9 F F F T T T 7 7 7 0 0 0 2 2 2 8 8 8 I I I C C C : : : 1 1 1 0 0 0 9 9 9 U U U - - - 8 8 8 9 9 9 F F F T T T 7 7 7 0 0 0 2 2 2 8 8 8 T T T e e e s s s t t t e e e d d d A A A c c c c c c o o o r r r d d d i i i n n n g g g t t t o o o F F F C C C C C C 4 4 4 7 7 7 C C C F F F R R R P P P a a a r r r t t t 1 1 1 5 5 5 , , , S S S u u u b b b p p p a a a r r r t t t s s s B B B & & & C C C T T T e e e s s s t t t s s s P P P e e e r r r f f f o o o r r r m m m e e e d d d f f f o o o r r r M M M o o o t t t o o o r r r o o o l l l a a a I I I s s s r r r a a a e e e l l l L L L t t t d d d . . . 3, Kremenitski Street, Tel Aviv, Israel Tel: (972) 3-565 9…

Text truncated - open the document above for the full version.