AZ489FT7049PORTABLE 2-WAY RADIO

APX 4000 User Guide Model 3 68012004058-A English mASTRO ® APX™ 4000 Series Digital Portable RadiosQuick Reference Card Product Safety and RF Exposure Compliance ATTENTION! This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with your radio (Motorola Publication part number 68012004065) to ensure compliance with RF energy exposure limits. Radio Controls Radio On/OffZones and Channels Receiving and TransmittingSending an Emergency Alarm * Default emergency button press timer is set to 1 second. This timer is programmable, see page 66 in the user guide for details.To exit emergency at any time, press and hold the Emergency button. Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio. ! C a u t i o n Battery Multi Function Knob (MFK)*:Primary Feature:_________________Secondary Feature:_________________ Accessory Connector Microphone Antenna • On – Press and hold the MFK until the display lights up. • Off – Press and hold the MFK until you see Power off? , then press Menu Select button below Yes . • Zone – Zone scroll to desired zone. • Channel – Channel scroll to desired channel. Data Feature Button Side Button 1__________ Side Button 2__________PTT Button MicrophoneTop Lightbar IndicatorTop Side (Select) Button__________ Main Speaker Main Display Top (Orange) Button___________ Bluetooth Pairing Indicator LED Keypad Menu Select Buttons 4-Way Navigation Button Home Button 1 Select zone/channel. 2 Listen for a transmission.ORPress and hold Volume Set button. ORPress Monitor button and listen for activity. 3 Adjust volume, if necessary. 4 Press the PTT button to transmit; release to receive. 1 Press and hold the Emergency button. 2 The display shows Emergency and the current zone/channel. You hear a short, medium-pitched tone, and the LED blinks momentary red. 3 When acknowledgment is received, you hear four beeps; alarm ends; and radio exits emergency. *PMLN6070A* PMLN6070A ©2011 by Motorola Solutions, Inc. All Rights Reserved. 10/111303 East Algonquin Road, Schaumburg,Illinois 60196, U.S.A. English Sending an Emergency Call To exit emergency at any time, press and hold the Emergency button. Sending a Silent Emergency Call To exit emergency at any time, press and hold the Emergency button. Display Status Icons 1 Press the Emergency button. 2 Press and hold the PTT button. Speak clearly into the microphone. 3 Release the PTT button to end call. 4 Press and hold Emergency button to exit emergency. 1 Press the Emergency button. 2 The display does not change; the LED does not light up, and there is no tone. 3 Silent emergency c ontinues until you: Press and hold the Emergency button to exit emergency state.ORPress and release the PTT button to exit the Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode. Receiving a call or data.Transmitting a call or data. u t Blinks when the battery is low.The more stripes, the stronger the signal strength for the current site (trunking only).Direct radio to radio communication or connected through a repeater.On = Direct Off = Repeater This channel is being monitored.L = Radio is set at Low power. H = Radio is set at High power. Scanning a scan list.Blinking dot = Detects activity on the Priority-One Channel during scan. Steady dot = Detects activity on the Priority-Two Channel during scan. 8 v O M H OR . i j The vote scan feature is enabled.On = Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call. On = AES Secure operation. Off = Clear operation. Blinking = Receiving an encrypted voice call.On = Location feature enabled, and location signal available. Off = Location feature disabled. Blinking = Location feature enabled, but location signal unavailable.On = User is currently associated with the radio. Off = User is currently not associated with the radio. Blinking = Device registration or user registration with the server failed due to an invalid username or pin.Data activity is present.Bluetooth is ready.Bluetooth is connected to the device. k m l G no b a Menu Navigation < or > to Menu Entry. { , | , or } directly below Menu Entry to select. H to exit. U or D to scroll through sub-list. { , | , or } directly below Menu Entry to select. Declaration of Conformity English i Declaration of Conformity This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below. DECLARATION OF CONFORMITYPer FCC CFR 47 Part 2 Section 2.1077(a)Responsible Party Name: Motorola Solutions, Inc.Address: 1303, East Algonquin Road, Schaumburg, Illinois 60196, U.S.A.Phone Number: 1-800-927-2744Hereby declares that the product: Model Name: APX 4000 conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital DeviceAs a personal computer peripheral, this device complies with Part 15 of the FC C Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity English ii Note: This equipment has been tested and found to comply with the li mits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provi de reasonable protection against harmful interference in a residential installation. This equipment generates, us es and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wi ll not occur in a particular installation. If this equipment does cause harm…

Text truncated - open the document above for the full version.

FCC ID: AZ489FT7049 EXHIBIT 13A SHEET 1 2 nd November 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ489FT7049, APX4000. Gentlemen: Motorola Solutions, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida, herein submits application for Certification of the subject transmitter. This transmitter is intended for use in a Portable Radio environment with capabilities for clear and coded communications with a variable transmit power operating within the following frequency ranges: 764 - 805 MHz: 1.0 – 2.65 Watts (Nominal) 806 – 869 MHz: 1.0 – 3.3 Watts (Nominal) We are requesting Certification under Part 15 and 90 of the Commission’s Rules to allow operation of this equipment. The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. Additionally, the radio is equipped with a Bluetooth transmitter capable of clear communication with fixed power operating within the following frequency ranges: 2.402-2.480 GHz: 10mW The Bluetooth transmitter complies with the requirements of FCC Part 15 subpart C. A complete Certification application is enclosed. If you require any additional information, please contact me at (954) 723-5793. Sincerely, Mike Ramnath Manager, Regulatory Compliance Email: [email protected]

FCC ID: AZ489FT7049 EXHIBIT 13b SHEET 1 REQUEST FOR CONFIDENTIALITY 2 nd November 2011 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality for Transmitter with FCC ID:AZ489FT7049 Dear Sir / Madam, Motorola Solutions is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Transmitter Description) not be made routinely available for public inspection. Motorola considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d), 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, Mike Ramnath (signed above) Manager, Regulatory Compliance Tel: (954) 723-5793 E-mail: [email protected]

Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 1 OF 8 EXHIBIT 3 The following photographs are attached. Exhibit 1. Back View with Battery 3A 2. Front View with Display and Keypad. 3B 3. Back View (FCC label location). 3C 4. Side view (Right). 3D 5. Side view (Left). 3E 6. Top view (Controls). 3F 7. Antennas 3G Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 2 OF 8 BACK VIEW WITH BATTERY EXHIBIT 3A Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 3 OF 8 FRONT VIEW WITH DISPLAY AND KEYPAD EXHIBIT 3B Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 4 OF 8 BACK VIEW (FCC LABELS) EXHIBIT 3C Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 5 OF 8 SIDE VIEW (RIGHT) EXHIBIT 3D Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 6 OF 8 SIDE VIEW (LEFT) EXHIBIT 3E Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 7 OF 8 TOP VIEW EXHIBIT 3F Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 3 SHEET 8 OF 8 7/800 MHz Antennas

Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 1 SHEET 1 OF 1 Identification Label LOCATION See the Attached Photograph or Sketch X Back of Radio Back of Radio under Belt Clip TYPE X The label is a paper polyester film laminate with a pressure Sensitive adhesive backing. The adhesive is a permanent type acrylic with minimum peel strength of 40 oz/inch. MARKINGS (TEXT) X See the Attached Photograph and Exhibit 3C for the actual location of the FCC label on the device. Label Attached Below. See Attached Drawing. FCC and IC Label Model 3 Full Keypad Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 1 SHEET 1 OF 1 FCC and IC Label Model 2 Limited Keypad

Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 1 OF 7 EXHIBIT 9 Internal Photographs The following photographs are attached. Exhibit 1. RF board without & with Shields (Top). 9A 2. RF board without & with Shields (Bottom). 9B 3. Keypad Board without shield (Bottom). 9C 4. Keypad Board with Shields (Bottom). 9D 5. Keypad Board (Top). 9E 6. RF board with chassis and housing (front side). 9F 7. RF Board with chassis and housing (back side). 9G Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 2 OF 7 EXHIBIT 9A RF board without & with Shields (Top) Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 3 OF 7 EXHIBIT 9B RF board without & with Shields (Bottom) Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 4 OF 7 EXHIBIT 9C Keypad board without Shields (Bottom) EXHIBIT 9D Keypad board with Shields (Bottom) Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 5 OF 7 EXHIBIT 9E Keypad Board (Top) Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 6 OF 7 EXHIBIT 9F RF board with chassis and housing (front side) Applicant: Motorola Solutions Inc. FCC ID: AZ489FT7049 EXHIBIT 9 SHEET 7 OF 7 EXHIBIT 9G Chassis and Housing (back side)

SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 1 of 14 TESTING CERT # 2518.01 Exhibit 7B: SAR Test Report Photographs Motorola Solutions Inc EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322 Deanna Zakharia EMS EME Lab Senior Resource Manager, Laboratory Director Approval Date: 10/6/2011 SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 2 of 14 Report Revision History Date Revision Comments 10/03/11 O Initial release SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 3 of 14 1.0 Highest SAR Test Position per body location 1.1 Body DUT w/ antenna NAR6595A with offered battery NNTN8128A and body worn accessory PMLN7008A against the phantom and no audio cable attached. Same position was used for the other offered antenna (see table below), battery and audio cable. Antenna kit # Separation Distances (mm) @ bottom surface of the DUT @ antenna’s base @ antenna’s tip NAR6595A 6 *29-35 *42-48 NAF5085A 6 29 52 *Depending on battery SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 4 of 14 1.2 Face DUT w/ front side separated 2.5cm from phantom with antenna NAR6595A and battery NNTN8128A Same position used for the other offered antenna (see table below) and battery Antenna kit # Separation Distances (mm) @ bottom surface of the DUT @ antenna’s base @ antenna’s tip NAR6595A 25 42 50 NAF5085A 25 42 54 1.3 Head Not applicable. 1.4 Hand Not applicable. 2.5cm SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 5 of 14 2.0 Other SAR tested positions at the body 2.1 Body worn DUT w/ antenna NAR6595A, battery NNTN8128A, audio HMN4104B and body worn PMLN4651A against the phantom. Same position used for the other offered antenna (see table below), battery. Antenna kit # Separation Distances (mm) @ bottom surface of the DUT @ antenna’s base @ antenna’s tip NAR6595A 8 *29-34 *42-46 NAF5085A 8 28 56 *Depending on battery SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 6 of 14 DUT w/ antenna NAR6595A battery NNTN8128A, audio cable HMN4104B, and body worn PMLN5950A against the phantom. Same position used for the other offered antenna (see table below) and battery. Antenna kit # Separation Distances (mm) @ bottom surface of the DUT @ antenna’s base @ antenna’s tip NAR6595A 10 76 112 NAF5085A 10 76 144 SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 7 of 14 DUT w/ antenna NAR6595A, battery NNTN8128A, audio cable HMN4104B, and body worn PMLN5950A without belt loop against the phantom and attached carry strap NTN5243A. Same position used for the other offered antenna (see table below) and battery. Antenna kit # Separation Distances (mm) @ bottom surface of the DUT @ antenna’s base @ antenna’s tip NAR6595A 0 *49-57 *74-83 NAF5085A 0 50 109 *Depending on battery SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 8 of 14 2.2 Front Side against phantom Not applicable. 2.3 Back side against phantom Not applicable. 2.4 Front 2.5cm separation Not applicable 2.5 Antenna 2.5cm separation Not applicable 2.6 Back 2.5cm separation Not applicable 3.0 Other SAR tested positions at the face 3.1 Back of DUT at 2.5cm separation Not Applicable 4.0 Other SAR tested positions at the head 4.1 Left ear touch Not applicable. 4.2 Left ear tilt Not applicable. 4.3 Right ear touch Not applicable. 4.4 Right ear tilt Not applicable. 5.0 Other SAR tested positions at the hand 5.1 Left side Not applicable. 5.2 Right side Not applicable. 5.3 Top side Not applicable. 5.4 Bottom side Not applicable. 5.5 Back side Not applicable. SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 9 of 14 6.0 DUT and Accessory Photos The purpose of these photos is to illustrate the offered accessories. Refer to Part 1 of 2 section 7.0 for more details. 6.1 Antenna dimension and photo: Antenna Kit # Physical Length (mm) Electrical Length NAR6595A 100 ¼ wave NAF5085A 200 ¼ wave Left–right: NAR6595A, NAF5085A SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 10 of 14 6.2 Body worn accessories DUT Back View Belt clip PMLN4651A DUT Side View Belt clip PMLN4651A DUT Back View Belt Clip PMLN7008A DUT Side View Belt Clip PMLN7008A DUT Back View Carry case PMLN5950A DUT Side View Carry case PMLN5950A DUT Front View Carry case PMLN5950A SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 11 of 14 Carry strap NTN5243A with body worn PMLN5950A SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 12 of 14 6.3 Battery accessories: Side view left – right: Front view left – right: NNTN8128A, NNTN8129A NNTN8128A, NNTN8129A 6.4 Audio accessories: RMN5058A Core L/W headset PMLN5275C Core H/D Headset PMLN5111A Plus 3 wire – Black – One programmable button PMLN5101A IMPRES Temple transducer SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 13 of 14 HMN4104B IMPRES Display Submersible RSM w/ jack & CH selector RLN5882A Plus 2-wire with translucent tube – Black – One programmable button PMMN4062A Large Plus Noise cancelling RSM IP55 3.5mm jack PMMN4065A Standard large IP57 RSM PMMN4024A Core RSM NNTN7869A Surveillance/key loader accessory adapter SR9748/9747 EMS EME Form-SAR-Rpt Ex7B-Rev. 2.00 Page 14 of 14 6.5 DUT Dimensions Height (mm) Width (mm) Depth (mm) Radio only (w/o battery) 130 63/52 32/31 Radio with battery NNTN8128A 130 63/52 35/40 For illustration purposes the following figure reflects the location of the device’s dimensions. Note: H = Height; W = Width; D = Depth W1 = (Width @ Top) / (Width @ PTT) D2 = (Depth @ Bottom) / (Depth @ PTT)

English Product Safety and RF Energy Exposure Booklet for Portable Two-Way Radios BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION AND OPERATIONAL INSTRUCTIONS FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. ALSO READ THE OPERATIONAL INSTRUCTIONS FOR SAFE USAGE. FOR RADIOS THAT HAVE BEEN APPROVED AS INTRINSICALLY SAFE, READ THE INSTRUCTIONS AND INFORMATION ON INTRINSIC SAFETY ON PAGE 11 OF THIS BOOKLET. Caution Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A. *6881095C98* 6881095C98-F *NNTN7223C* NNTN7223C MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2007 – 2011 Motorola Solutions, Inc. All rights reserved. 2 English RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTICE: This radio is intended for use in occupational/controlled conditions where users have full knowledge of their exposure and can exercise control over their exposure to meet the occupational limits in FCC and International standards. This radio device is NOT authorized for general population consumer use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 3 English Please refer to the following websites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission (FCC) Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for portable two-way radios before they can be marketed in the U.S. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Motorola two-way radio has a RF Exposure Product Label. Also, your Motorola user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standards Your Motorola two-way radio is designed and tested to comply with a number of national and International standards and guidelines (listed below) for human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with these exposure guidelines, your radio generates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 4 English NOTE:The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-5% listen-90% standby) even though this radio complies with FCC occupational exposure limits and may operate at duty factors of up to 50% talk. Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. • FCC, OET Bulletin 65 • Institute of Electrical and Electronic Engineers (IEEE) C95.1 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) • Ministry of Health (Canada) Safety Code 6 • Industry Canada RSS-102 • Australian Communications Authority Radiocommunications Standard et seq. • ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions To control your exposure and ensure compliance with the occupational/controlled environment exposure limits, always adhere to the following procedures. Guidelines: • DO NOT remove the RF Exposure Label from the device. • User awareness instructions should accompany device when transferred to other users. • DO NOT use this device if the operational requirements described herein are not met. 5 English Operating Instructions • Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is important because this radio generates measurable RF energy exposur…

Text truncated - open the document above for the full version.

SR9748/9747 Motorola Solutions EME Form-SAR-Rpt-Rev. 11.0 Page 1 of 79 TESTING CERT # 2518.01 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 1 of 2 Motorola Solutions Inc. EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322. Date of Report: 10/06/2011 Report Revision: O Report ID: SR9748 APX4000 7/800 BT 1 of 2 Rev O 111006 Responsible Engineer: Michael Sailsman (Senior Staff Eng.) Report Author: Michael Sailsman (Senior Staff Eng.) Date/s Tested: 8/24/11-9/20/11 Manufacturer/Location: Penang Sector/Group/Div.: G&PS Date submitted for test: 7/26/11 DUT Description: 764-775 MHz and 794-805 MHz at 2.5 W, 806-824 MHz and 851-870 MHz at 3 W, 6.25kHz/12.5kHz/25kHz, Single Display full keypad Model. Capable of digital and analog FM as well as TDMA transmissions. This radio is Bluetooth equipped. Test TX mode(s): CW (PTT); BT (CW) Max. Power output: 2.99 W (764-805 MHz), 3.6 W (806-870 MHz); 0.010 W (Bluetooth) Nominal Power: 2.50 W (764-805MHz), 3.0 W (806-870 MHz) CW; 0.010 W (Bluetooth) Tx Frequency Bands: 764-775 MHz, 794-805 MHz, 806-824 MHz, 851-870 MHz; 2.402-2.480 GHz (Bluetooth) Signaling type: FM; TDMA; FHSS(BT) Model(s) Tested: H51UCH9PW7AN (MUF1554), H51UCH9PW7AN (MUF1555) Model(s) Certified: H51UCH9PW7AN (MUF1554) Serial Number(s): 426TMM0204, 426TMM0206, 426TMM0091, 426TMM0092 Classification: Occupational/Controlled FCC ID: AZ489FT7049; Rule part 90 (764-869 MHz); Rule part 15 (2402-2480 MHz) IC: 109U-89FT7049 * Refer to section 15 of part 1 for highest SAR summary results. The test results clearly demonstrate compliance with FCC Occupational/Controlled RF Exposure limits of 8 W/kg averaged over 1 gram per the requirements of 47 CFR 2.1093(d). The 10 grams result is not applicable to FCC filing. The test results clearly demonstrate compliance with ICNIRP (1998) Guidelines for limiting exposure in time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz), Health Physics 74, 494-522 RF Exposure limits of 10 W/kg averaged over 10grams of contiguous tissue. Based on the information and the testing results provided herein, the undersigned certifies that when used as stated in the operating instructions supplied, said product complies with the national and international reference standards and guidelines listed in section 3.0 of this report. This report shall not be reproduced without written approval from an officially designated representative of the Motorola Solutions Inc EME Laboratory. I attest to the accuracy of the data and assume full responsibility for the completeness of these measurements. This reporting format is consistent with the suggested guidelines of the TIA TSB-150 December 2004. The results and statements contained in this report pertain only to the device(s) evaluated. Deanna Zakharia EMS EME Lab Senior Resource Manager, Laboratory Director Approval Date: 10/6/2011 Certification Date: 10/6/2011 Certification No.: L1110909P & L1110910P SR9748/9747 Motorola Solutions EME Form-SAR-Rpt-Rev. 11.0 Page 2 of 79 Part 1 of 2 1.0 Introduction ..............................................................................................................4 2.0 Abbreviations / Definitions ......................................................................................4 3.0 Referenced Standards and Guidelines ......................................................................4 4.0 SAR Limits ..............................................................................................................5 5.0 SAR Result Scaling Methodology ...........................................................................5 6.0 Description of Device Under Test (DUT) ................................................................6 7.0 Optional Accessories and Test Criteria ....................................................................7 7.1 Antennas ......................................................................................................7 7.2 Batteries .......................................................................................................7 7.3 Body worn Accessories ................................................................................7 7.4 Audio Accessories .......................................................................................8 8.0 Description of Test System ....................................................................................10 8.1 Descriptions of Robotics/Probes/Readout Electronics ..............................10 8.2 Description of Phantom(s) .........................................................................11 8.2.1 Dual Flat Phantom .........................................................................11 8.2.2 SAM Phantom ................................................................................11 8.2.3 Elliptical Phantom ..........................................................................11 8.3 Description of Simulated Tissue ................................................................11 9.0 Additional Test Equipment ....................................................................................12 10.0 SAR Measurement System Verification ................................................................13 10.1 Equivalent Tissue Test Results ..................................................................13 10.2 System Check Test Results ........................................................................15 11.0 Environmental Test Conditions .............................................................................16 12.0 DUT Test Methodology .........................................................................................16 12.1 Measurements ............................................................................................16 12.2 DUT Configuration(s) ................................................................................16 12.3 DUT Positioning Procedures ......................................................…

Text truncated - open the document above for the full version.

SR9748/9747 EMS EME Form-SAR-Rpt-Rev. 11.0 Page 1 of 50 TESTING CERT # 2518.01 DECLARATION OF COMPLIANCE SAR ASSESSMENT Part 2 of 2 Motorola Solutions Inc. EME Test Laboratory 8000 West Sunrise Blvd Fort Lauderdale, FL. 33322. Date of Report: 10/06/2011 Report Revision: O Report ID: SR9748 APX4000 7/800 BT 2 of 2 Rev O 111006 Responsible Engineer: Michael Sailsman (Senior Staff Eng.) Report Author: Michael Sailsman (Senior Staff Eng.) Date/s Tested: 8/24/11-9/20/11 Manufacturer/Location: Penang Sector/Group/Div.: G&PS Date submitted for test: 7/26/11 DUT Description: 764-775 MHz and 794-805 MHz at 2.5 W, 806-824 MHz and 851-870 MHz at 3 W, 6.25kHz/12.5kHz/25kHz, Single Display full keypad Model. Capable of digital and analog FM as well as TDMA transmissions. This radio is Bluetooth equipped. Test TX mode(s): CW (PTT); BT (CW) Max. Power output: 2.99 W (764-805 MHz), 3.6 W (806-870 MHz); 0.010 W (Bluetooth) Nominal Power: 2.50 W (764-805MHz), 3.0 W (806-870 MHz) CW; 0.010 W (Bluetooth) Tx Frequ…

Text truncated - open the document above for the full version.