AZ492FT7079Mobile 2-Way Radio

PROFESSIONAL DIGITAL TWO-WAY RADIO MOTOTRBO™ XPR 5550/XPR 5580/XPR 5550e /XPR 5580e COLOR DISPLAY MOBILE USER GUIDE Contents Declaration of Conformity.......................14 Important Safety Information........16 Software Version............................17 Version logicielle........................... 18 Computer Software Copyrights....19 Getting Started...............................20 How to Use This Guide..................................20 What Your Dealer/System Administrator Can Tell You.............................................20 Preparing Your Radio for Use.......22 Powering Up the Radio..................................22 Adjusting the Volume.....................................22 Identifying Radio Controls............24 Radio Controls...............................................24 Using the Volume/Channel Knob.................. 24 Non-Connect Plus Operations......25 Additional Radio Controls in Non-Connect Plus Mode....................................26 Push-To-Talk (PTT) Button.................26 Programmable Buttons.......................26 Assignable Radio Functions.....27 Assignable Settings or Utility Functions............................ 30 Accessing the Programmed Functions....................................... 30 Contents 1 English Identifying Status Indicators................31 Display Icons............................31 Call Icons................................. 34 Advanced Menu Icons..............34 Mini Notice Icons......................35 Sent Item Icons ....................35 Bluetooth Device Icons............ 36 Job Tickets Icons..................... 36 LED Indicator........................... 36 Alert Tones...............................37 Indicator Tones........................ 38 Switching Between Conventional Analog and Digital Mode................38 IP Site Connect ...............................39 Capacity Plus ..................................39 Linked Capacity Plus ......................40 Making and Receiving Calls in Non-Connect Plus Mode....................................42 Selecting a Zone.................................42 Selecting a Channel............................42 Receiving and Responding to a Radio Call...................................... 43 Receiving and Responding to a Group Call....................43 Receiving and Responding to a Private Call .............. 44 Receiving an All Call ...............44 Receiving and Responding to a Selective Call ...........45 Receiving and Responding to a Phone Call ............... 46 Making a Radio Call............................47 Making a Group Call................ 48 Making a Private Call ...........49 Making an All Call ................... 50 Making a Selective Call ....... 50 Making a Phone Call................51 Making a Private Call with a One Touch Call Button........52 Making a Group, Private or All Call with the Programmable Number Key .....................................53 Stopping a Radio Call .....................54 Talkaround..........................................55 Contents 2 English Advanced Features in Non- Connect Plus Mode............56 Radio Check....................................... 56 Sending a Radio Check........... 56 Remote Monitor.................................. 57 Initiating Remote Monitor.........58 Stopping Remote Monitor........ 59 Scan Lists........................................... 59 Viewing an Entry in the Scan List............................. 59 Editing the Scan List................ 60 Scan....................................................62 Starting and Stopping Scan..... 62 Responding to a Transmission During a Scan....................................63 Deleting a Nuisance Channel...63 Restoring a Nuisance Channel...............................63 Vote Scan .......................................64 Contact Settings..................................64 Making a Group Call from Contacts..............................65 Making a Private Call from Contacts ..........................66 Assigning an Entry to a Programmable Number Key ..................................66 Removing the Association between Entry and Programmable Number Key ..................................67 Adding a New Contact............. 68 Setting a Default Contact .....69 Call Indicator Settings.........................69 Activating and Deactivating Call Ringers for Call Alert .........................................69 Activating and Deactivating Call Ringers for Private Calls ................................70 Activating and Deactivating Call Ringers for Selective Call ..................................71 Activating and Deactivating Call Ringers for Text Message............................. 71 Activating and Deactivating Call Ringers for Contents 3 English Telemetry Status with Text.....................................72 Assigning Ring Styles.............. 72 Escalating Alarm Tone Volume................................73 Call Log Features................................73 Viewing Recent Calls...............73 Deleting a Call from a Call List...................................... 74 Viewing Details from a Call List...................................... 74 Call Alert Operation.............................75 Receiving and Responding to a Call Alert...................... 75 Making a Call Alert from the Contact List.........................75 Making a Call Alert with the One Touch Access Button..................................76 Emergency Operation.........................76 Receiving an Emergency Alarm...................................77 Responding to an Emergency Alarm............... 77 Exiting Emergency Mode After Receiving the Emergency Alarm............... 78 Sending an Emergency Alarm...................................78 Sending an Emergency Alarm with Call....................79 Sending an Emergency Alarm with Voice to Follow ............................. 80 Reinitiating an Emergency Mode...................................82 Exiting Emergency Mode After Sending the Emergency …

Text truncated - open the document above for the full version.

English RF Energy Exposure and Product Safety Guide for Mobile Two-Way Radios Installed in Vehicles, Vessels or as Fixed Site Control Stations ATTENTION! The information provided in this document supersedes the general safety information contained in user guides published prior to January 2008. BEFORE USING THIS RADIO, READ THIS BOOKLET WHICH CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. *6881095C99* 6881095C99-J *NNTN7851D* NNTN7851D Motorola Solutions, Inc. 1303 E. Algonquin Rd., Schaumburg, IL 60196, U.S.A. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2005 – 2012 Motorola Solutions, Inc. All rights reserved. 6881095C99_SafetyM_Eng.fm Page 1 Tuesday, March 20, 2012 2:43 PM 2 English RF Energy Exposure Awareness and Control Information, and Operational Instructions for FCC Occupational Use Requirements NOTICE: This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses radio frequency (RF) energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, sunlight and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for safe exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All Motorola two-way radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. 6881095C99_SafetyM_Eng.fm Page 2 Tuesday, March 20, 2012 2:43 PM 3 English Please refer to the following Web sites for more information on what RF energy exposure is and how to control your exposure to assure compliance with established RF exposure limits. http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov/SLTC/radiofrequencyradiation/index.html Federal Communication Commission Regulations The FCC rules require manufacturers to comply with the FCC RF energy exposure limits for mobile two-way radios before they can be marketed in the U.S. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. Your Motorola two-way radio has a RF exposure product label. Also, your Motorola user manual, or separate safety booklet, includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements. Compliance with RF Exposure Standard Your Motorola two-way radio is designed and tested to comply with a number of national and international standards and guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This radio complies with the IEEE and ICNIRP exposure limits for occupational/ controlled RF exposure environment at duty factors of up to 50% talk-50% listen and is authorized by the FCC for occupational use only. In terms of measuring RF energy for compliance with the FCC exposure guidelines, your radio antenna radiates measurable RF energy only while it is transmitting (during talking), not when it is receiving (listening) or in standby mode. 6881095C99_SafetyM_Eng.fm Page 3 Tuesday, March 20, 2012 2:43 PM 4 English Your Motorola two-way radio complies with the following RF energy exposure standards and guidelines: • United States Federal Communications Commission (FCC), Code of Federal Regulations; 47 CFR et seq. • FCC, OET Bulletin 65 • Institute of Electrical and Electronic Engineers (IEEE) C95.1 • International Commission on Non-Ionizing Radiation Protection (ICNIRP) • Ministry of Health (Canada) Safety Code 6 • Industry Canada RSS-102 • Australian Communications Authority Radiocommunications Standard et seq. • ANATEL ANNEX to Resolution No. 303 et seq. RF Exposure Compliance and Control Guidelines and Operating Instructions To control exposure to yourself and others and to ensure compliance with the RF exposure limits, always adhere to the following procedures. Guidelines: • User awareness instructions should accompany device when transferred to other users. • DO NOT use this device if the operational requirements described herein are not met. 6881095C99_SafetyM_Eng.fm Page 4 Tuesday, March 20, 2012 2:43 PM 5 English Instructions: •Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-To-Talk (PTT) button or, for radios equipped with VOX, speak into the microphone. The red LED will illuminate when the radio is transmitting. To receive calls, release the PTT button, or, for radios equipped with VOX, stop talking. The red LED will extinguish when the radio stops tran…

Text truncated - open the document above for the full version.

-i m MOTOTRBO ™ Mobile Installation Guide XPR TM 4350/XPR TM 4380 Numeric Display Mobile (with GPS) XPR TM 4550/XPR TM 4580 Display Mobile (with GPS) XPR TM 5350/XPR TM 5380 Numeric Display Mobile (with Bluetooth and GPS) XPR TM 5550/XPR TM 5580 Color Display Mobile (with Bluetooth and GPS) XPR TM 5350e/XPR TM 5380e Numeric Display Mobile (with WLAN, Bluetooth and GPS) XPRTM 5550e/XPR TM 5580e Color Display Mobile (with WLAN, Bluetooth and GPS) *6880309T23* 6880309T23-FA 0 i Foreword This manual is intended for use by experienced technicians familiar with similar types of equipment. Specifically, it contains installation information required for the XPR Series Mobile Radios. For information related to the service of the XPR Series Mobile Radios, refer to Related Publications on page v for the list of applicable manuals available separately. Product Safety and RF Exposure Compliance See Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards on page ii. Manual Revisions Changes which occur after this manual is printed are described in PMRs (Publication Manual Revisions). These PMRs provide complete replacement pages for all added, changed, and deleted items. To obtain PMRs, go to: https://businessonline.motorolasolutions.com Parts Ordering See Appendix A: Replacement Parts Ordering for information on how to obtain replacement parts. For part numbers, refer to the service manuals listed in Related Publications on page v. Computer Software Copyrights The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Document Copyrights No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Motorola. Disclaimer The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights nor the rights of others. Trademarks MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2006 – 2015 Motorola Solutions, Inc. All rights reserved. ii Installation Requirements for Compliance with Radio Frequency (RF) Energy Exposure Safety Standards ATTENTION! This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to meet FCC limits. This radio device is NOT authorized for general population, consumer, or any other use. To ensure compliance to RF Energy Safety Standards: •Install only Motorola approved antennas and accessories. •Be sure that antenna installation is per Antenna Installation on page 2-11 of this manual. •Be sure that Product Safety and RF Safety Booklet enclosed with this radio is available to the end user upon completion of the installation of this radio. Before using this product, the operator must be familiar with the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet enclosed with each radio (Motorola publication part number 6881095C99_) to ensure compliance with Radio Frequency (RF) energy exposure limits. This radio has a transmitter Time-out Timer that disables the transmitter during a transmission after a pre- defined time period, which by default is set to 60 seconds. For a list of Motorola-approved antennas and other accessories, visit the following web site, which lists approved accessories for your radio model: http://www.motorolasolutions.com For radios installed in vehicles fuelled by liquefied petroleum gas, refer to the (U.S.) National Fire Protection Association standard, NFPA58, for storage, handling, and/or container information. It is recommended NOT to change the default 60 seconds time period for the Time-out Timer as the radio is intended for intermittent duty cycle operation. ! W A R N I N G ! C a u t i o n Table of Contentsiii Table of Contents Foreword ..........................................................................................................i Product Safety and RF Exposure Compliance .............................................................................................i Manual Revisions .........................................................................................................................................i Parts Ordering ..............................................................................................................…

Text truncated - open the document above for the full version.

Motorola Solutions Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 Certification Department Advanced Compliance Solutions, Inc. 5015 B U Bowman Drive Buford, GA 30518 USA Date: November 19, 2015 SUBJECT: Application Authorization for FCC and IC filing To Whom It May Concern: I hereby authorize Arine Lee to apply, on my behalf, the application for the following FCC and IC: FCC ID: AZ492FT7079 IC: 109U-92FT7079 Please contact me if there are any questions or issues. Regards, Kim Uong Regulatory Compliance Engineer Tel: (954) 723-5422 E-mail: [email protected]

FCC ID: AZ492FT7079 EXHIBIT 13A ____________________________________________________________________________ Motorola Solutions Inc, Plot 2 Bayan Lepas, Technoplex Industrial Park, MK12 SWD, 11900 Penang, Malaysia 20 November 2015 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Application for Certification of Transmitter with FCC ID: AZ492FT7079 Dear Sir/Madam, Motorola Solutions Inc, Plot 2 Bayan Lepas, Technoplex Industrial Park, Mukim12 SWD, Malaysia, herein submits application for Certification of the subject transmitter. This transmitter is intended for use in a Mobile Transmitter environment with capabilities for clear and coded communications with a variable transmit power operating within the following frequency range: Product Name Frequency Rated Power FCC Rules Parts XPR 5350e XPR 5550e 406.1-470 MHz 459.025-459.650 MHz 450.00625-455.99375 MHz 467.75-467.825 MHz 40W (rated) 48W (max) 90 22 74 80 2402-2480 MHz 7.8 mW (max) 15C 2412-2462 MHz 17.8 mW (max) 15C XPR 5550e model is a color display model and is the most complex model that has 1024Mb mDDR memory, and supports both USB and GOB. XPR 5350e model is numeric display model and is identical electrically to XPR 5550e model. We are requesting Certification under Part(s) of the Commission’s Rules to allow operation of this equipment. The transmitter is intended for work related occupational use only under Part 90 of the FCC rules. The subject transmitter complies with Section 90.203 of the Rules in that the operator cannot directly program transmit frequencies using the unit's normally accessible external controls. A complete Certification application is enclosed. If you require any additional information, please contact me at 604-8503130. Sincerely, Arine Lee FCC/IC Regulatory Compliance Engineer

FCC ID: AZ492FT7079 EXHIBIT 13B ____________________________________________________________________________ Motorola Solutions Inc, Plot 2 Bayan Lepas, Technoplex Industrial Park, MK12 SWD, 11900 Penang, Malaysia CONFIDENTIALITY REQUEST 9 November 2015 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ492FT7079 Dear Sir or Madam: Motorola Solutions is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola Solutions considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d), 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential”. Please contact me if you require any additional information. Sincerely, Arine Lee FCC/IC Regulatory Compliance Engineer

Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 1 OF 8 EXHIBIT 3 EXTERNAL PHOTOGRAPHS - Pursuant to 47 CFR 2.1033(c) 12 The following photographs are attached. Exhibit 1. Front view (Color Display and Numeric Display) 3A 2. Back view 3B 3. Top view 3C 4. Bottom View (FCC label location) 3D 5. RF exposure label (Close view) 3E 6. Side view (Left) 3F 7. Side view (Right) 3G 8. Top view with microphone and rear accessory cable 3H Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 2 OF 8 EXHIBIT 3A Front view (Color Display) Front view (Numeric Display) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 3 OF 8 EXHIBIT 3B Back view Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 4 OF 8 EXHIBIT 3C Top view Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 5 OF 8 EXHIBIT 3D Bottom view (FCC Label Location) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 6 OF 8 EXHIBIT 3E RF Exposure Label (Close View) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 7 OF 8 EXHIBIT 3F Side view (Left) EXHIBIT 3G Side View (Right) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 3 SHEET 8 OF 8 EXHIBIT 3H Top view with microphone and rear accessory cable Note: 1. Cables from the connector are wrapped and placed on the radio. 2. RF exposure label placed at the end of the Microphone cable.

Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 1 EXHIBIT 1 Identification Label LOCATION See the Attached Photograph or Sketch Top of Radio X Back of Radio Back of Radio under Belt Clip TYPE X The label is a polyester film laminate with a pressure sensitive adhesive backing. The adhesive is a permanent type acrylic with the minimum peel strength of 32 oz/inch. MARKINGS (TEXT) X See the Attached Photograph and Exhibit 3D for the actual location of the FCC label on the device. X Label Attached Below. See Attached Drawing. FCC and IC Label for XPR 5350e 403-470MHz 40W GOB BT/GNSS/WiFi Numeric Display FCC and IC Label for XPR 5550e 403-470MHz 40W GOB BT/GNSS/WiFi Color Display Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 1 FCC and IC Label for XPR 5550e 403-470MHz 40W GOB GNSS CFS BT/WiFi Color Display

Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 1 OF 6 EXHIBIT 9 INTERNAL PHOTOGRAPHS The following photographs are attached. Exhibit 1. RF board with and without shields (Top) 9A 2. RF board with and without shields (Bottom) 9B 3. Chassis and control heads (Top) 9C 4. Chassis and control heads (Bottom) 9D 5. GOB board with and without shields 9E 6. Wifi/GPS/BT board with and without shields 9F Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 2 OF 6 Exhibits 9A RF board with and without shields (Top) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 3 OF 6 Exhibits 9B RF board with and without shields (Bottom) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 4 OF 6 Exhibits 9C Chassis and control heads (Top) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 5 OF 6 Exhibits 9D Chassis and control heads (Bottom) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 6 OF 6 Exhibits 9E GOB board (Top) GOB board with shield (Bottom) GOB board without shield (Bottom) Applicant: Motorola Solutions Inc. FCC ID: AZ492FT7079 / IC: 109U-92FT7079 EXHIBIT 9 SHEET 7 OF 6 Exhibits 9F GPS/BT/Wifi board (Top) GPS/BT/Wifi board with shield (Bottom) GPS/BT/Wifi board without shield (Bottom) BT/WiFi antenna GPS port BT/WiFi test port

Test Report No. 7191120730-EEC15/01 dated 05 Oct 2015 Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜDGroup and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is governed by the terms set out within this report. Motorola Solutions Malaysia Sdn BhdPage 1 of67 MOTOTRBO Mobile Radio [ Model : AAM28QPN9RA1AN ] [ FCC ID : AZ492FT7079 & IC : 109U-92FT7079 ] TEST REPORT COVER PAGE Product Information Product Name / Description: MOTOTRBO MOBILE RADIO (BLUETOOTH LOW ENERGY) Applicant Company Number:109U Model Number(s):AAM28QPN9RA1ANUPN Number:92FT7079 All Used IC Test Site(s) Reg. #: 2932I-1SAR Test Lab Company Number: -- Emissions Information Band 1Band 2Band 3Band 4Band 5Band 6Band 7Band 8 RSS # & Issue #RSS-247 & Issue 1 Frequency Min (MHz)2402 Frequency Max (MHz)2480 RF Power Min (W ) Conducted / EIRP / ERP -- RF Power Max (W) Conducted 0.0026 Field Strength Units @ distance 103.4 dBPV/m @ 3m Measured BW (kHz) (99%, 26dB, 6dB, etc.) 1044 (99%) Calculated BW (kHz) As per TRC-43 1200 Emission Classification (FID, GID, DID, etc.) 1M20G1 D Transmitter Spurious Units @ distance 14.4GHz 50.5 dBPV/m (Peak) @ 3m BBBBBBBB RSS # & Issue # Frequency Min (MHz) Frequency Max (MHz) RF Power Min (W ) Conducted / EIRP / ERP RF Power Max (W) Conducted / EIRP / ERP Field Strength Units @ distance Measured BW (kHz) (99%, 26dB, 6dB, etc.) Calculated BW (kHz) As per TRC-43 Emission Classification (FID, GID, DID, etc.) Transmitter Spurious Units @ distance Agreement Signature ATTESTATION: The test measurements were made in accordance with the above-mentioned departmental standard(s), and that the radio equipment identified in this application has been subject to all the applicable test conditions specified in the departmental standards and all of the requirements of the standards have been met. Applicant / Agent Name:Lim Cher HweeApplicant / Agent Title:Assistant Vice President Applicant / Agent Signature:Signature Date:05 Oct 2015 Test Report No. 7191120730-EEC15/01 dated 05 Oct 2015 Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜDGroup and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is governed by the terms set out within this report. LA-2007-0380-A LA-2007-0381-F LA-2007-0382-B LA-2007-0383-G LA-2007-0384-G LA-2007-0385-E LA-2007-0386-C LA-2010-0464-D The results reported herein have been performed in accordance with the laboratory’s terms of accreditation under the Singapore Accreditation Council - Singapore Laboratory Accreditation Scheme. Tests/Calibrations marked "Not SAC-SINGLAS Accredited" in this Report are not included in the SAC- SINGLAS Accreditation Schedule for our laboratory. Laboratory: TÜV SÜD PSB Pte. Ltd. No.1 Science Park Drive Singapore 118221 Phone : +65-6885 1333 Fax : +65-6776 8670 E-mail: [email protected] www.tuv-sud-psb.sg Co. Reg : 199002667R Regional Head Office: TÜV SÜD Asia Pacific Pte. Ltd. 3 Science Park Drive, #04-01/05 The Franklin, Singapore 118223 Page 2 of 67 FORMAL REPORT ON TESTING IN ACCORDANCE WITH 47 CFR FCC Parts 15B & C RSS-GEN Issue 4: 2014 RSS-247 Issue 1: 2015 OF A MOTOTRBO MOBILE RADIO (BLUETOOTH LOW ENERGY) [ Model : AAM28QPN9RA1AN ] [ FCC ID : AZ492FT7079 & IC : 109U-92FT7079 ] TEST FACILITY TÜV SÜD PSB Pte Ltd Electrical & Electronics Centre (EEC), Product Services, No. 1 Science Park Drive, Singapore 118221 FCC REG. NO. 99142 (3m and 10m Semi-Anechoic Chamber, Science Park) IND. CANADA REG. NO. 2932I-1 (3m and 10m Semi-Anechoic Chamber, Science Park) PREPARED FOR Motorola Solutions Malaysia Sdn Bhd Plot 2, Technoplex Industrial Park Mukim 12 Swd, Medan Bayan Lepas, Bayan Lepas Industrial Park, 11900 Bayan Lepas, Pulau Penang, Malaysia Tel : +604 2528543Fax : +604 8503099 QUOTATION NUMBER 2191024729 JOB NUMBER 7191120730 TEST PERIOD 14 Sep 2015 – 28 Sep 2015 PREPARED BYAPPROVED BY ____________________ Quek Keng Huat Higher Associate Engineer ____________________ Lim Cher Hwee Assistant Vice President Motorola Solutions Malaysia Sdn BhdPage 3 of 67 MOTOTRBO Mobile Radio [ Model : AAM28QPN9RA1AN ] [ FCC ID : AZ492FT7079 & IC : 109U-92FT7079 ] Test Report No. 7191120730-EEC15/01 dated 05 Oct 2015 TABLE OF CONTENTS TEST SUMMARY ..........................................................................................................…

Text truncated - open the document above for the full version.