AZ499FT7177DH300 CURVE DIGITAL HUB 1W 900MHZ

DH300 Curve Digital Hub Quick Reference Guide August 2023 © 2023 Motorola Solutions, Inc. All rights reserved *MN009239A01* MN009239A01-AA en-US fr-CA DH300 Curve Digital Hub Quick Reference Guide This Quick Reference Guide covers the basic operation of the device. For more operational details and information, refer to the MN009243A01 DH300, CB400 Series Installation Guide at https:// learning.motorolasolutions.com. Important Safety Information ATTENTION! Before using this product, read the RF Energy Awareness and Acoustic Safety information and operating instructions. RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use Note: This device is intended for use in occupational/controlled conditions where users are aware of their exposure and can exercise control over their exposure to meet the requirements in national and international regulations. This device is not authorized for general population, consumer use. Observe a minimum safe distance of 80 cm from the device to the operator. For more information on what RF energy exposure is, and how to control your exposure to ensure compliance with established RF exposure limits, consult the following websites: • https://www.fcc.gov/ • https://www.osha.gov/ • https://osha.europa.eu/en • https://www.who.int/health-topics/electromagnetic-fields/ • http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html • http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html For additional user training information on exposure requirements, consult the following websites: • https://www.motorolasolutions.com/en_us/about/company-overview/ corporate-responsibility/governance-and-policies.html • http://learning.motorolasolutions.com/ Notice to Users (FCC and ISED) This device complies with Part 15 of the FCC rules and Innovation, Science and Economic Development Canada's license-exempt RSS(s) per the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. • Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. The DH300 Digital Hub operates in the license-free 900 MHz ISM Band (902-928 MHz). DH300 Curve Digital Hub Overview 2 4 5 1 3 English Table 1: DH300 Curve Digital Hub Overview NoDescription 1LED Indicator 23.5 mm Audio Jack 3USB-2 Service Connector 4RJ45 Ethernet Connector 512 VDC Power Input Connector Getting Started Connecting through Ethernet Port 1.Connect to the DC power adaptor. 2.Connect the DH300 to your local LAN using the Ethernet connector. • The DH300 IP address is Dynamic Host Configuration Protocol (DHCP) and automatically connects to the internet and starts provisioning in within 45 seconds. • The Transmission Control Protocol (TCP)/Internet protocol (IP) ports must be open. The default settings are TCP port 443 and UDP ports 53 and 123. LED Indicators Table 2: LED Indicators LED Indicators StatusTroubleshooting Solid RedHub is powering up.- Solid Blue Hub is provisioning the cloud deployment. - Blinking WhiteConnection establish- ed. - LED Indicators StatusTroubleshooting Blinking Green Audio communication transmission is in pro- gress. - Solid GreenTransmitting audio communication. - Solid YellowInternet is connected but the hub connec- tion to the cloud serv- er is not successful. Check the internet connection. Blinking Yellow No internet connec- tion. Check the internet connection. Blinking RedCommunication with the modem is not suc- cessful. Faulty hub. Contact technical support. English Guide de référence rapide du concentrateur numérique DH300 Curve Ce guide de référence rapide décrit le fonctionnement de base de l’appareil. Pour plus de détails et d’informations sur son fonctionnement, reportez- vous au Guide d’installation de la série MN009243A01 DH300, CB400 à l’adresse https://learning.motorolasolutions.com. Information sur la sécurité importante ATTENTION! Avant d’utiliser ce produit, lisez les informations sur l’exposition à l’énergie de RF et sur la sécurité acoustique ainsi que les instructions de fonctionnement. Sensibilisation à l'exposition à l'énergie de RF, moyens de contrôle et consignes d'utilisation pour l'usage professionnel de cette radio Remarque : Cet appareil a été conçu pour un usage professionnel dans un environnement contrôlé, où les utilisateurs sont pleinement conscients de l’exposition à laquelle ils sont soumis et peuvent exercer un contrôle sur cette exposition afin de respecter les limites établies par les règlements nationaux et internationaux. Cet appareil n’est pas autorisé pour l’utilisation par la population générale et les consommateurs. Nous recommandons à l’opérateur de se maintenir à une distance minimale de 80 cm de l’appareil. Visitez les sites Web suivants pour obtenir plus de renseignements sur ce qu’est l’énergie RF et sur les moyens de contrôle à prendre afin de respecter les limites établies en matière d’exposition à l’énergie RF : • https://www.fcc.gov/ • https://www.osha.gov/ • https://osha.europa.eu/en • https://www.who.int/health-topics/electromagnetic-fields/ • http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf11467.html • http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01904.html Pour plus de renseignements sur la formation des utilisateurs relativement aux limites d’exposition, consultez les sites suivants : • https://www.motorolasolutions.com/en_us/about/company-overview/ corporate-responsibility/governance-and-policies.html • http://learning.motorolasolutions.com/ Avis aux utilisateurs (FCC et ISED) Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence et à la partie 15 des règlements de la FCC : • Cet appareil ne doit pas causer d’interférence nuisible. • Cet appareil doit accepter toute interférence reçue, y com…

Text truncated - open the document above for the full version.

DH300 Curve Digital Hub and CB400 Series Installation Guide SEPTEMBER 2023 © 2023 Motorola Solutions, Inc. All Rights Reserved. *MN009243A01* MN009243A01-AA Draft Contents Foreword................................................................................................................................3 Document History ..................................................................................................................4 Intellectual Property and Regulatory Notices.........................................................................5 Legal and Compliance Statements........................................................................................6 Supplier's Declaration of Conformity........................................................................................................6 Supplier's Declaration of Conformity........................................................................................................7 ISED WLAN Statement............................................................................................................................8 Notice to Users (FCC and Innovation, Science and Economic Development Canada (ISED))...............8 Compliance with RF Exposure Standards...............................................................................................8 Important Safety Information....................................................................................................................8 Operational Safety Guidelines...................................................................................................... 8 Chapter 1: Introduction......................................................................................................... 10 1.1 Installation Overview........................................................................................................................10 Chapter 2: Configuring Motorola Solutions Tool...................................................................11 Chapter 3: On-Site Installation..............................................................................................12 3.1 Setting up the DH300 Curve Digital Hub......................................................................................... 12 3.2 Setting up the CB400 Series Wi-Fi Call Button................................................................................12 3.2.1 Basic Troubleshooting........................................................................................................14 Chapter 4: Wi-Fi Call Button Mount......................................................................................15 4.1 Mounting CB401 Glass Mount Wi-Fi Call Button.............................................................................15 4.2 Mounting CB402 Blade Style Wi-Fi Call Button...............................................................................17 4.3 Mounting CB403C Counter Top WiFi Call Button............................................................................23 4.4 Mounting CB403W Wall Mount Wi-Fi Call Button............................................................................28 Chapter 5: Accessories.........................................................................................................31 MN009243A01-AA Contents 2 Draft Foreword This manual is intended for on-site installation of the DH300 Curve Digital Hub and CB400 Series Call Buttons. Configuration to the devices is performed in Motorola Solutions Configuration Tool by Motorola Solutions authorized dealers. For more information, see Configuring Motorola Solutions Tool on page 11. MN009243A01-AA Foreword 3 Draft Document History EditionDescriptionDate MN009243A01-AAInitial release.September 2023 MN009243A01-AA Document History 4 Draft Intellectual Property and Regulatory Notices Copyrights The Motorola Solutions products described in this document may include copyrighted Motorola Solutions computer programs. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola Solutions. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc. Trademarks MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. License Rights The purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Open Source Content This product may contain Open Source software used under license. Refer to the product installation media for full Open Source Legal Notices and Attribution content. European Union (EU) and United Kingdom (UK) Waste of Electrical and Electronic Equipment (WEEE) Directive The European Union's WEEE directive and the UK's WEEE regulation require that products sold into EU countries and the UK must have the crossed-out wheelie bin label on the product (or the package in some cases). As defined by the WEEE directive, this crossed-out wheelie bin label means that customers and end-users in EU and UK countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU and UK countries should cont…

Text truncated - open the document above for the full version.

FCC ID: AZ499FT7177 _______________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13e Revision 1 (30 Jan 2023) Date: October 22, 20023 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements pursuant to Part 2.911 (d)(5)(i) with FCC ID: AZ499FT7177 Dear Sir/Madam, According to FCC 22-84 and KDB 986446, Motorola Solutions Malaysia Sdn Bhd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ____________________ Arine Lee FCC/IC Certification Manager E-mail : [email protected] FCC ID: AZ499FT7177 _______________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13e Revision 1 (30 Jan 2023) Date: October X, 2023 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements pursuant to Part 2.911 (d)(5)(ii) with FCC ID: AZ499FT7177 Dear Sir/Madam, According to FCC 22-84 and KDB 986446, Motorola Solutions Inc certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, ____________________ Arine Lee FCC/IC Certification Manager E-mail : [email protected]

FCC ID: AZ499FT7177 _______________________________________________________________________________________________________________________ Motorola Solutions Inc. 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 EXHIBIT 13f Revision 2 (24 Februray 2023) Date: October 22, 2023 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements pursuant to Part 2.911 (d)(7) with FCC ID: AZ499FT7177 Dear Sir/Madam, This letter is to confirm that Motorola’s Solutions Inc has a US Representative on behalf of for all future FCC certification/registrations. As the FCC Representative, we are aware of the requirements involved as outlined in US applicable document (FCC 22-84 and KDB 986446). US Representative Company Name: Motorola Solutions FRN Number: 0003778479 Company Grantee Code: AZ4 Contact Name: Deanna Zakharia Address: 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 Telephone Number: (954) 723-4707 E-mail: [email protected] Applicant Company Name: Motorola Solutions Company Grantee Code: AZ4 Contact Name: Deanna Zakharia Address: 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 Telephone Number: (954) 723-4707 Sincerely, ____________________ Deanna Zakharia Regulatory Compliance Manager E-mail: [email protected]

EXHIBIT 2d Revision 1 (30 Jun 2023) SHEET 1 OF 1 Certification Department Date: October 24, 2023 Subject: Authorization for FCC and IC filing To Whom It May Concern: I hereby authorize Khoo Teik Kean to apply to sign Ex02a_Statement_of_Certification, Ex02b_Attestation-WLAN Declaration and Ex02c_Attestation-Bands Declaration (Module), on my behalf, for the following FCC and IC: FCC ID: AZ499FT7177 IC: 109U-99FT7177 Please contact me if there are any questions or issues. Regards, ____________________ Arine Lee FCC/IC Certification Manager Tel: 604-2240258 E-mail : [email protected]

FCC ID: AZ499FT7177 ___________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia Declaration Date: October 25, 2023 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch Federal Communications Commission Laboratory 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern, Please be notified that we, Arine Lee, have designated Spencer Zhong of Nemko Canada, Inc. being responsible and to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out in their professional capacity by Spencer Zhong of Nemko Canada, Inc. in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier: FCC ID: AZ499FT7177 If you have any acknowledgement and response, please send it to Nemko Canada, Inc. directly. Should you have any questions or comments regarding this matter, please don’t hesitate to contact me. Sincerely, Arine Lee FCC/IC Certification Manager E-mail : [email protected] Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia Contact: +60(4)2240258

____________________________________________________________________________ Motorola Solutions Inc, 8000 West Sunrise Boulevard, Fort Lauderdale, Florida 33322 Certification Department Date: 25 October 2023 Subject: Application Authorization for FCC/IC filing To Whom It May Concern: I hereby authorize Arine Lee to apply, on my behalf, the application for the following FCC/IC ID: FCC/IC ID: AZ499FT7177 / 109U-99FT7177 Please contact me if there are any questions or issues. Regards, Deanna Zakharia Regulatory Compliance Manager Tel: (954) 723 4707 Email: [email protected]

FCC ID: AZ499FT7177 _______________________________________________________________________________________________________________________ Motorola Solutions Malaysia Sdn Bhd, Plot 2A, Medan Bayan Lepas, Mukim 12 SWD, 11900 Bayan Lepas, Penang, Malaysia EXHIBIT 13(i) Revision 1 (2 Aug 2022) CONFIDENTIALITY REQUEST October 22, 2023 Office of Engineering and Technology Laboratory Division Equipment Authorization Branch FCC Laboratory 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for Transmitter with FCC ID: AZ499FT7177 Dear Sir / Madam, Motorola Solutions Malaysia Sdn Bhd is requesting that Exhibit 4 (Circuit Descriptions), Exhibit 5 (Schematic Diagrams), Exhibit 10 (Parts List and Tune Up Procedures), and Exhibit 12 (Operational Description) not be made routinely available for public inspection. Motorola Solutions considers the information in these exhibits to be classified as trade secrets, pursuant to 47 CFR Section 0.457(d), 0.459 and Section 552(b)(4) of the Freedom of Information Act. Please mark Exhibits 4, 5, 10, and 12 as “Confidential.” Please contact me if you require any additional information. Sincerely, ____________________ Arine Lee FCC/IC Certification Manager E-mail : [email protected]

Applicant: Motorola Solutions Inc FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 3A Revision 1 (16 Nov 2022) SHEET 1 OF 6 EXHIBIT 3A EXTERNAL PHOTOGRAPHS (Pursuant to FCC Part 2.1033(b)(7) and 2.1033(c)(12) and RSP 100 Annex C) The following photographs are attached. Exhibit 1. Front View 3A 2. Back View with FCC/IC label location 3B 3. Side view (Right) 3C 5. Side view (Left) 3D 6. Top view 3E 7. Bottom view 3F Applicant: Motorola Solutions Inc FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 3A Revision 1 (16 Nov 2022) SHEET 2 OF 6 Exhibit 3A - Front View Applicant: Motorola Solutions Inc FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 3A Revision 1 (16 Nov 2022) SHEET 3 OF 6 Exhibit 3B - Back View with FCC/IC label location Applicant: Motorola Solutions Inc FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 3A Revision 1 (16 Nov 2022) SHEET 4 OF 6 Exhibit 3C - Side view (Right) Applicant: Motorola Solutions Inc FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 3A Revision 1 (16 Nov 2022) SHEET 5 OF 6 Exhibit 3D - Side view (Left) Applicant: Motorola Solutions Inc FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 3A Revision 1 (16 Nov 2022) SHEET 6 OF 6 Exhibit 3E - Top view Exhibit 3F - Bottom view *** END ***

Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9 Internal Photographs (Pursuant to FCC Part 2.1033(b)(7), 2.1033(c)(12) and RSP 100 Annex C) The following photographs are attached.Exhibit 1.RF board with Shields (Top)9A 2.RF board without Shields (Top)9B 3.RF board with Shields (Bottom)9C 4.RF board without Shields (Bottom)9D 5.RF boards with chassis and housing for (Front Side)9E 6.Chassis and housing (Back Side)9F 7.Raspberry Pi Board (Top)9G 8.Raspberry Pi Board (Bottom)9H 9.Interface board (Top)9I 10.Interface board (Bottom)9J 11.DH300 Hub (Side View Right)9K EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 1 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9A - RF board with Shields (Top) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 2 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9B - RF board without Shields (Top) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 3 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9C - RF board with Shields (Bottom) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 4 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9D - RF board without Shields (Bottom) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 5 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9E - RF boards with chassis and housing for (Front Side) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 6 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9F - Chassis and housing (Back Side) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 7 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9G - Raspberry Pi Board (Top) EXHIBIT 9H - Raspberry Pi Board (Bottom) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 8 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9I - Interface board (Top) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 9 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9J - Interface board (Bottom) EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 10 OF 11 Applicant: Motorola Solutions Inc.FCC ID: AZ499FT7177 / IC: 109U-99FT7177 EXHIBIT 9K - DH300 Hub (Side View Right) *** END *** EXHIBIT 9 Revision 1 (2 Aug 2022) SHEET 11 OF 11

www.nemko.com Nemko USA Inc., a testing laboratory, is accredited by ANAB. The tests included in this report are within the scope of this accreditation. Choose Scandinavian trust Assessment Report REP001909-3R2ARFWL Type of assessment: MPE Calculation report Manufacturer: Model: Motorola Solutions, Inc. DHS1100BMPAA Product description: Product marketing name(s) DH300 DH300 FCC ID: ISED certification number: AZ499FT7177 109U-99FT7177 Specification:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 5 Amendment 1, (February 2021)  FCC OET Bulletin 65 Report reference ID: REP013204-3R2ARFWL Page 2 of 6 Lab locations= Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 392943 Designation Number: US5058 ISED Test Site 2040B-3 Prepared by James Cunningham, EMC/WL Manager Date August 29, 2023 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: REP013204-3R2ARFWL Page 3 of 6 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Declaration ......................................................................................................................................................................................... 4 Evaluation summary ........................................................................................................................................................................... 5 2.1 MPE calculation for standalone transmission ........................................................................................................................................................... 5 Report reference ID: REP013204-3R2ARFWL Page 4 of 6 Declaration Description of product: DH300 CURVE DIGITAL HUB 1W 900MHZ (BRUS/BRCAN) Model(s) / HVIN: DHS1100BMPAA Product marketing name (PMN): DH300 Firmware Version Identification Number (FVIN): 1.5.0 Host Marketing Name (HMN): DH300 RSS-102 Annex B - Declaration of RF Exposure Compliance ATTESTATION: I attest that the information provided is correct; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of RSS-102. Date of issue: August 21, 2023 James Cunningham, EMC/WL Manager Prepared by Signature Report reference ID: REP013204-3R2ARFWL Page 5 of 6 Evaluation summary 2.1 MPE calculation for standalone transmission 2.1.1 References, definitions, and limits FCC §2.1091(d) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 2.1-1: Table 1 to §1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. RSS-102, Section 4 For the purpose of this standard, Industry Canada has adopted the SAR and RF field strength limits established in Health Canada’s RF exposure guideline, Safety Code 6: Table 2.1-2: Table 4 to RSS-102— RF Field Strength Limits Frequency range (MHz) Electric field strength (V/m rms) Magnetic field strength (A/m rms) Power density (W/m 2 ) Reference Period (minutes) Limits for Controlled Environment 10–20 61.4 0.163 10 6 20–48 129.8 / ƒ 0.25 0.3444 / ƒ 0.25 44.72 / ƒ 0.5 6 48–100 49.33 0.1309 6.455 6 100–6000 15.60 ƒ 0.25 0.04138 ƒ 0.25 0.6455 ƒ 0.5 6 6000–15000 137 0.364 50 6 Limits for Uncontrolled Environment 10–20 27.46 0.0728 2 6 20–48 58.07 / ƒ 0.25 0.1540 / ƒ 0.25 8.944 / ƒ 0.5 6 48–300 22.06 0.05852 1.291 6 300–6000 3.142 ƒ 0.3417 0.008335 ƒ 0.3417 0.02619 ƒ 0.6834 6 6000–15000 61.4 0.163 10 6 Notes: ƒ = frequency in MHz. Report reference ID: REP013…

Text truncated - open the document above for the full version.

Datasheet ANT-915-NUB-ccc 915 MHz LPWA Whip Antenna The ANT-915-NUB-ccc is an extremely compact whip-style antenna designed for sub-1 GHz and low-power, wide-area (LPWA) applications including LoRaWAN ® , IoT, remote controls, and ISM band applications in the 902 MHz to 930 MHz range. The ANT-915-NUB-ccc is a rugged monopole antenna with a length of less than 18 mm. The ANT-915-NUB-ccc may be used with metallic and non-metallic enclosures. The antenna connects using an SMA plug (male pin) or RP-SMA plug (female socket) connector. Ordering Information Part NumberDescription ANT-915 -NUB -RPS 915 MHz LPWA whip antenna with RP-SMA …

Text truncated - open the document above for the full version.