AZD317Wireless Module

Installation Manual Screw TOP VIEW TOP COVER TOP VIEW Screw TOP VIEW Bottom VIEW The end product must be labeled "Contains FCC ID: AZD317/IC: 498J‐317” Following statement must be included in the user manual of host device. FCC/IC Notice Model:CD1100(includingWLANModuleModelWM317FCCID:AZD317) The end product must be labeled "Contains FCC ID: AZD317/IC: 498J‐317” Following statement must be included in the user manual of host device. FCC/IC Notice Model:CD1100 (including WLAN Module Model WM317, FCC ID:AZD317) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS‐102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). ThisdevicecomplieswithPart15ofFCCRulesandIndustryCanadalicence‐exemptRSSstandard(s)Operationis The end product must be labeled "Contains FCC ID: AZD317/IC: 498J‐317” Following statement must be included in the user manual of host device. FCC/IC Notice Model:CD1100 (including WLAN Module Model WM317, FCC ID:AZD317) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS‐102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). This device complies with Part 15 of FCC Rules and Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co‐located or operated in conjunction with any other antenna or transmitter. The end product must be labeled "Contains FCC ID: AZD317/IC: 498J‐317” Following statement must be included in the user manual of host device. FCC/IC Notice Model:CD1100 (including WLAN Module Model WM317, FCC ID:AZD317) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS‐102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). This device complies with Part 15 of FCC Rules and Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co‐located or operated in conjunction with any other antenna or transmitter. FCC Notice (Printer, Model CD1100 Systems) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant The end product must be labeled "Contains FCC ID: AZD317/IC: 498J‐317” Following statement must be included in the user manual of host device. FCC/IC Notice Model:CD1100 (including WLAN Module Model WM317, FCC ID:AZD317) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS‐102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles). This device complies with Part 15 of FCC Rules and Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co‐located or operated in conjunction with any other antenna or transmitter. FCC Notice (Printer, Model CD1100 Systems) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: The end product must be labeled "Contains FCC ID: AZD317/IC: 498J‐317” Following statement must be included in the user manual of host device. FCC/IC Notice Model:CD1100 (including WLAN Module Model WM317, FCC ID:AZD317) This equipment complies w…

Text truncated - open the document above for the full version.

聓      㖆 㖆 㖆 㖆   ⚑ ⚑ ⚑ ⚑ ❧ ❧ ❧ ❧ A ntenna

Label Location(Main Board) 「」

聓      㖆 㖆 㖆 㖆   ⚑ ⚑ ⚑ ⚑ ❧ ❧ ❧ ❧ A ntenna

UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Applica nt: C an on Inc. T ype of Equipment : W ireless Module Model No. : WM317 FCC ID: AZD317 Canon Inc. declares that M odel : W ireless M odule complies with FCC radiation exposure requirement specified in the FCC Rules 2.1091. The “W M317“ has 122.46 mW of conducted Peak O utput power and 177.01 mW of EIRP. This equipment is considered as a mobile device so that SAR testing is excluded. The Following calculation is the reference data for 20cm distance. RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “W M 317“ as calculated from FCC OET Bulletin 65 Appendix A, Table (B) Limits for General Population / Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1.0mW/cm^2 uncontrolled exposure limit. The Friis formula used was: S = (P * G) / (4* π * r 2 ) Where P = 122.46 mW (M aximum peak output power) G = 1.45 Numerical Antenna gain; equal 1.60 dBi r =20.0 cm For: W M 317S = 0.03521mW/cm 2 No. : 32DE0228-SH-02-A RF Ex posure / SAR Statement

Test report No. : 32DE0228-SH-02-A Page : 1 of 52 Issued date : March 1, 2012 Revised date : April 3, 2012 FCC ID : AZD317 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 RADIO TEST REPORT Test Report No. : 32DE0228-SH-02-A Applicant : Canon Inc. Type of Equipment : Wireless Module Model No. : WM317 FCC ID : AZD317 Test regulation : FCC Part15 Subpart C: 2012 Test result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. The test results in this test report are traceable to the national or international standards. 5. This test report must not be used by the customer to claim product certification, approval, or endorsement by any agency of the Federal Government. 6. The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan has been accredited. Date of test: February 3 to 12, 2012 Representative test engineer: ______________________________ Tatsuya Arai Engineer of WiSE Japan, UL Verification Service Approved by : ______________________________ Go Ishiwata Manager of WiSE Japan, UL Verification Service RTL02610 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan. There is no testing item of "Non-accreditation". 13-EM-F0429 Test report No. : 32DE0228-SH-02-A Page : 2 of 52 Issued date : March 1, 2012 Revised date : April 3, 2012 FCC ID : AZD317 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 REVISION HISTORY Original Test Report No.: 32DE0228-SH-02-A Revision Test report No. Date Page revised Contents - (Original) 32DE0228-SH-02-A March 1, 2012 - - 1 32DE0228-SH-02-A April 3, 2012 P1, 2, 8 P8: Addition of comment for power setting Correction of Model No. Test report No. : 32DE0228-SH-02-A Page : 3 of 52 Issued date : March 1, 2012 FCC ID : AZD317 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Contents Page SECTION 1: Customer information ..................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ....................................................................... 4 SECTION 3: Test specification, procedures & results ......................................................... 5 SECTION 4: Operation of E.U.T. during testing ................................................................. 8 SECTION 5: Conducted emission ......................................................................................... 9 SECTION 6: 6dB bandwidth & Occupied bandwidth (99%) ............................................. 9 SECTION 7: Maximum peak output power ....................................................................... 10 SECTION 8: Spurious emission (Antenna port conducted) .............................................. 10 SECTION 9: Radiated emission .......................................................................................... 11 SECTION 10: Peak Power density ...................................................................................... 12 Contents of APPENDIXES ................................................................................................... 13 APPENDIX 1: Test data ...................................................................................................... 14 APPENDIX 2: Test instruments .......................................................................................... 49 APPENDIX 3: Photographs of test setup ............................................................................ 50 Test report No. : 32DE0228-SH-02-A Page : 4 of 52 Issued date : March 1, 2012 FCC ID : AZD317 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 SECTION 1: Customer information Company Name : Canon Inc. Brand Name : CANON Address : 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Telephone Number : +81-3-3757-6218 Facsimile Number : +81-3-3757-8431 Contact Person : Ryoji Kon SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Wireless Module Model No. : WM317 Serial No. : Refer to 4.2 in this report. Rating : DC3.3V Receipt Date of Sample : February 3, 2012 Country of Mass-production : China Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No modification by the test lab. 2.2 Product description Model: WM317 (referred to as the EUT in this report) is a Wireless Module. Clock frequency(ies) in the system : 32.768kHz, 38.4MHz Radio specification Equipment type : Transceiver Frequency of operation : 2412-2462MHz Bandwidth & channel spacing : 20MHz & 5MHz Type of modulation : DSSS (IEEE 802.11b), OFDM (IEEE 802.11g) Antenna type : /4 monopole Antenna connector type : None Antenna gain with cable loss : +1.6 dBi ITU code : D1D, G1D Operation temperature range : 0 to +60 deg.C. FCC Part15.31 (e) The Wireless Module is provided with stable power supply DC 3.3V and DC1.8V from the host device, therefore, the equipment complies power supply regulation. FCC Part15.203 The antenna is not removable from the EUT. Therefore, the equipment complies with the antenna requirement of Section 15.203. Test report No. : 32DE0228-SH-02-A Page : 5 of 52 Issued date : March 1, 2012 FCC ID : AZD317 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 SECTION 3: Te…

Text truncated - open the document above for the full version.

Test report No. : 32DE0228-SH-02-A UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 APPENDIX 3: Photographs of test setup Conducted emission Front view Side view 50 Test report No. : 32DE0228-SH-02-A UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radiated emission Front view Rear view (below 1GHz) Rear view (above 1GHz) 51 Test report No. : 32DE0228-SH-02-A UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Pre-check of the worst position X-axis Y-axis Z-axis 52/52