AZD319Wireless Module

User Manual Since this module is not sold to general end users directly, there is no user manual of module. For the details about this module, please refer to the specification sheet of module. This module should be installed in the host device according to the interface specification (installation procedure). The end product must be labeled “Contains FCC ID: AZD319/ IC: 498J-319” Following statement must be included in the user manual of host device. FCC/IC Notice Model: CD1132 (including Wireless Module Model WM319, FCC ID: AZD319 / IC: 498J-319) This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body. This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. FCC Notice (Compact Photo Printer, Model CD1132 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. The cable with the ferrite core provided with the digital camera must be used with this equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Park, Melville, New York 11747, U.S.A. Tel No. 1-800-OK-CANON (1-800-652-2666) Canadian Radio Interference Regulations CAN ICES-3 (B)/NMB-3 (B)

Photo Canon Inc. WM319 WLAN module Antenna Photo Canon Inc. WM319

㻱 㻯 㻟 㻥 㻞 䝯 䜲 䞁 㻼 㼃 㻮 䝷 䝧 䝹 グ ㍕ ෆ ᐜ 㻞㻜㻝㻡㻛㻜㻟㻛㻝㻟䝷䝧䝹グ㍕ෆᐜ 16 5.2m 16mm 16mm16 mm FCC ID:AZD319 IC:498J - 319

1 Internal Photo <With Shield> Top view Bottom view 2 Internal Photo Top view Side view <Without Shield>

UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Applicant: Canon Inc. Type of Equipment: W ireless M odule Model No. : WM319 FCC ID: AZD319 Canon Inc. declares that M odel : W M 319 complies with FCC radiation exposure requirement specified in the FCC Rules 2.1091. RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “W M 319“ as calculated from FCC Part 1, §1.1310, TABLE 1 (B) Limits for General Population / Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system , considering m axim um power and antenna gain, and considering a 1.0m W /cm ^2 uncontrolled exposure lim it. The Friis form ula used was: S = (P * G) / (4* π * r 2 ) Where P = 13.18 mW (M aximum average output power) G = 0.55 Numerical Antenna gain; equal to -2.60 dBi r =20.0 cm For: W M 319S = 0.00144 mW/cm 2 Even taking into account the tolerance, this device can be satisfied with the lim its. No. : 10679344S-A RF Exposure / SAR Statement

Test report No. : 10679344S-A Page : 1 of 37 Issued date : March 19, 2015 Revised date : April 3, 2015 FCC ID : AZD319 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 RADIO TEST REPORT Test Report No.: 10679344S-A Applicant : Canon Inc. Type of Equipment : Wireless Module Model No. : WM319 FCC ID : AZD319 Test regulation : FCC Part 15 Subpart C: 2015 Test result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report apply only to the sample tested. 3. This sample tested is in compliance with the limits of the above regulation. 4. The test results in this test report are traceable to the national or international standards. 5. This test report must not be used by the customer to claim product certification, approval, or endorsement by any agency of the Federal Government. 6. The opinions and the interpretations to the result of the description in this report are outside scopes where UL Japan has been accredited. Date of test: February 19 to 27, 2015 Representative test engineer: Tatsuya Arai Engineer Consumer Technology Division Approved by : Toyokazu Imamura Leader Consumer Technology Division RTL02610 The testing in which "Non-accreditation" is displayed is outside the accreditation scopes in UL Japan. There is no testing item of "Non-accreditation". 13-EM-F0429 Test report No. : 10679344S-A Page : 2 of 37 Issued date : March 19, 2015 Revised date : April 3, 2015 FCC ID : AZD319 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 REVISION HISTORY Original Test Report No.: 10679344S-A Revision Test report No. Date Page revised Contents - (Original) 10679344S-A March 19, 2015 - - 1 10679344S-A April 3, 2015 4 Correction of Rating and operation temperature Test report No. : 10679344S-A Page : 3 of 37 Issued date : March 19, 2015 FCC ID : AZD319 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Contents Page SECTION 1: Customer information ........................................................................................ 4 SECTION 2: Equipment under test (E.U.T.) .......................................................................... 4 SECTION 3: Test specification, procedures & results ........................................................... 5 SECTION 4: Operation of E.U.T. during testing .................................................................... 7 SECTION 5: Conducted emission ............................................................................................ 9 SECTION 6: 6dB bandwidth & Occupied bandwidth (99%) .............................................. 10 SECTION 7: Maximum peak output power .......................................................................... 10 SECTION 8: Out of band emissions (Antenna port conducted) ......................................... 10 SECTION 9: Peak power density ........................................................................................... 10 SECTION 10: Radiated emission ........................................................................................... 11 Contents of APPENDIXES ....................................................................................................... 13 APPENDIX 1: Data of Radio tests .......................................................................................... 14 APPENDIX 2: Test instruments ............................................................................................. 34 APPENDIX 3: Photographs of test setup ............................................................................... 35 Test report No. : 10679344S-A Page : 4 of 37 Issued date : March 19, 2015 Revised date : April 3, 2015 FCC ID : AZD319 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 SECTION 1: Customer information Company Name : Canon Inc. Address : 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Telephone Numbe r : +81-3-5482-8070 Facsimile Numbe r : +81-3-3757-8431 Contact Person : Hironobu Saida SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of equipmen t : Wireless Module Model No. : WM319 Serial No. : Refer to 4.2. Rating : DC24V Country of Mass- production : China Condition of EUT : Engineering prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No modification by the test lab. Receipt Date of Sample : February 18, 2015 2.2 Product description Model: WM319 (referred to as the EUT in this report) is a Wireless Module. General specification: Clock frequency(ies) in the system : 24MHz, 40MHz Radio specification: Equipment type : Transceiver Frequency of operation : 2412-2462MHz Bandwidth : 20MHz Channel spacing : 5MHz Type of modulation : DSSS (IEEE 802.11b), OFDM (IEEE 802.11g) Antenna type : Pattern Antenna connector type : None Antenna gain : -2.6dBi ITU code : D1D, G1D Operation temperature : Max.+55 deg.C FCC 15.31 (e) / 212 The stable voltage (DC3.3V) is provided constantly to RF part via regulator. Therefore, the EUT complies with the requirement. FCC 15.203 / 212 The antenna is not removable from the EUT. Therefore, the equipment complies with the requirement. Test report No. : 10679344S-A Page : 5 of 37 Issued date : March 19, 2015 FCC ID : AZD319 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 SECTION 3: Test specification, procedures & results 3.1 Test specification Test specification : FCC Part 15 Subpart C: 2015, final revised on January 21, 2015 Title : FCC 47CFR Part15 …

Text truncated - open the document above for the full version.

UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 APPENDIX 3: Photographs of test setup Conducted emission Test Report No 10679344S-A 35 of 37 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Radiated emission Front Rear (Below 1GHz) Rear (Above 1GHz) Test Report No 10679344S-A 36 of 37 UL Japan, Inc. Shonan EMC Lab. 1-22-3 Megumigaoka, Hiratsuka-shi, Kanagawa-ken, 259-1220 JAPAN Telephone : +81 463 50 6400 Facsimile : +81 463 50 6401 Pre-check of the worst position X-axis Y-axis Z-axis End of Report Test Report No 10679344S-A 37 of 37