B5D300760Cordless Telephone Base Transceiver

Document Update for FCC ID B5D300760 Reference:J. Dichoso email to G.Wright, 4/13/99 Update Explanation: The data on page 9 lists measurements taken at 1 meter, but the table header states that the measurements were taken at 3 meters. The table shows limits per FCC 15.209 restated for 1 meter per calculation listed on page 6. Page 6 also states that all measurements were taken at 1 meter. We have confirmed that the data were taken at 1 meter. Measurements recorded at 3 meters, per industry standard, were unable to generate a reading above the noise floor of the test equipment. The unit was brought into 1 meter so that readings above the noise floor could be measured. These values recorded at 1 meter show that all requirements of FCC 15.209 are met. Unfortunately, a standard template table was used in listing the data from the six highest radiated peaks, which incorrectly called out a measurement of 3 meters instead of the 1 meter actually used. The following page lists the information measured accurately: To replace table on page 9 of Wireless Base document Six Highest Radiated Peaks (Measured at 3 meters) Frequency (MHz) Peak Amplitude (dBμμV/m)) Class B Limit (dBμμV/m)) Limit Delta (dB) Polarization (H/V) and Axis Results 1.82Below Noise Floor 69.5---VCompliant *****Compliant *****Compliant *****Compliant *****Compliant *****Compliant Six Highest Radiated Peaks (Measured at 1 meter) Frequency (MHz) Peak Amplitude (dBμμV/m)) Class B Limit (dBμμV/m)) Limit Delta (dB) Polarization (H/V) and Axis Results 1.8272.888.6-15.8VCompliant *****Compliant *****Compliant *****Compliant *****Compliant *****Compliant * All other emissions were below the ambient noise floor.