B5KAKRB1011112-2WCDMA Base station amplifier

Open Information DESCRIPTION1 ( 25 ) ERA/RGN/PD Jennie Bergström5/1551-HRB 105 102/1 Uen ERA/RKF/TU Carl Helander2003-01-28C Prepared (also subject responsible if other)No ApprovedCheckedDateRevReference E Node Description ContentsPage 1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.1Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1.2Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2Radio Network Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 3RBS Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 3.1Main Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 3.2Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3.3Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 3.4RBS Characteristics and Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 4Hardware Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4.1Connection Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 4.2CU ..................................................................................8 4.3BB Subrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4.4RF Subrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 4.5MCPA Subrack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.6Transmission Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.7Internal Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5Node Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5.1Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.2Common Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6.1Application Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 7External Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 7.1lub Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.2Uu Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 7.3Mub Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.4GUI ................................................................................. 23 7.5VMI ................................................................................. 23 8O&M ................................................................................ 24 8.1Standard Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 8.2Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 A4 XSEIF R2 Open Information DESCRIPTION2 ( 25 ) ERA/RGN/PD Jennie Bergström5/1551-HRB 105 102/1 Uen ERA/RKF/TU Carl Helander2003-01-28C Prepared (also subject responsible if other)No ApprovedCheckedDateRevReference E 1Introduction This document describes the indoor Radio Base Station (RBS) 3202 in a Radio Access Network (RAN) that uses Wideband Code Division Multiple Access (WCDMA) technology. 1.1Purpose This document is intended as a first level introduction to the RBS for network Operations and Maintenance (O&M) personnel. 1.2Scope This document is divided in the following sections: •Radio Network Overview •RBS Overview •Hardware Structure •Software Structure •Functions •External Interfaces •O&M 2Radio Network Overview This section gives an overview of the Radio Network of which the RBS is a part. figure 1 shows the parts of the Radio Network. Open Information DESCRIPTION3 ( 25 ) ERA/RGN/PD Jennie Bergström5/1551-HRB 105 102/1 Uen ERA/RKF/TU Carl Helander2003-01-28C Prepared (also subject responsible if other)No ApprovedCheckedDateRevReference E User Equipment RAN RNC RBS Core Network B 00 00268A RAN customer services Network Management System RANOS Core Network/ other management applications Figure …

Text truncated - open the document above for the full version.

Open EXHIBIT 4 1 (3) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-11-25 A 1 EXHIBIT 4 – BLOCK DIAGRAMS Contents 1 EXHIBIT 4 – BLOCK DIAGRAMS 1 1.1 MCPA 1900 WCDMA 2/1913-KRB 101 1112/2 Uen Block Diagram 2 1.2 MCPA WCDMA 1/1913-ROA 101 1112/1 Function Diagram 3 Spread Spectrum Injction -1 - -3 -11 0&3$BB7;*DLQ  dB 0&3$BB3RXW  dBm -2 0,25 dBm 1,5 dBm -17 dBm -17 dBm -3 dBm -5,5 dBm 47,5 dBm )'8 46 dBm AC PR -1,5 dB GALI-5 GALI-5 GALI-5 ODP Gali-3 Delilah -11 Gali-3 -38 dBc -0,1 -0,3 -0,3 -0,5 -0,1 - 5)B287 16,75 -12,5 -3 16,75 0 -18,5 0 0 -5 19 0 -20 -0,5 19 41 12 -26 -10 -26 (-2 - -20) 21,5 dBm - 36,0 dBm -16,5 dBm -7 dBm -21 -1,00 -10 - 3LQ  dBm -6 TA TA 20 dBm TA 11,5 dBm 40 3HDNWR$YHUDJH   dB - - -3 -6 -8,5 -4 dBm -11 BPF1 SXA389 -10 -15 4 dBm -30,0 dBm -15,8 dBm -19,0 dBm -7,8 dBm -23,3 dBm 5)B,1 0 -0,5 PHS1 PHS2 SXA389 PHS3 ODP -0,5 - - -0,5 -3 GALI-3 GALI-3 TA GALI-5 Delilah (MACOM) GALI-5 ODP GALI-3 -4,0 dBm - -3 - 9 dBm -3,5 -15 -1,25 0 14 -2 -6,5 14 -11 -0,5 0 -7,5 0 -6 19,25 -2 -2 -18,5 -2 19,25 -6 17,25 -2 -23 -1,5 17,3 -6,3 19,25 -11 -1,25 -1 (-2 - -20) 0 -10,5 (-2 - -20) -7 dBm -12,25 dBm 5 dBm 4,5 dBm -3 -2,5 dBm -12,8 dBm -3 -3 SW_CTRL_2 BPF2 GALI-3 -8,8 dBm SDL -8 -0,5 -14 dBm 0 -5 20,5 -4 1 dBm 0 -11 -1 -6 LOGDET -4 -2 -20,3 dBm -11 - -12,5 dBm SW_CTRL_1 Gali-3 - -31,8 dBm -38,5 dBm 20,5 0-2 -1 -29 dBm -0,5 -11,5 dBm -22,75 dBm -24 dBm -2 -4 - GALI-3 GALI-3 -15 GALI-3 -11 SW_CTRL BPF3 GALI-3 -3 - -3 SW_CTRL_4 -11 -2 19,25 -4 -4 -3 19,25 0 -20,5 0 -0,5 19,5 -0,5 -1 19,5 -3 -14,5 dBm -1 RMSDET -45 dBm 0 (20dB cancellation) -27 dBm -3 8 SW_CTRL_2 -11 dBm mixer MAX2681 -1 -9 Gali-3 RF to BB 0 Err_I 30 6 SW_CTRL_5 -14 -1 SW_CTRL_4-1 -6 dBm (CW) -14 PLL -0,5 -3 -3 SW_CTRL_5 0 -11 -2 -3 -3 -1 -1 -3,0 dBm (CW) mixer MAX2681 GALI-3 SW_CTRL_3 -6 J1 -> J24 -4,8 -20 Err_Q PYT9016 J1 -> J11 1,5 (-2 - -30) RF to BB 30 6 SS to CW J1 -> J25 -11,5 8 J21 -> J11 -5,5 -6 J13 -> J12 4,5 &: WR66 SW_CRTL_1 -61 dBm -3 J13 -> J24 -23,3 PYT 9016 To Spead Spctrum injection -17,5 dBm J14 -> J25 -38,5 -3 0 -1 -17 SW_CRTL_1 -37,0 dBm(CW) PRBS_O -1 SW_CRTL_3 2.5Khz PRBS M CW to SS 0 Uppgjord - Prepared ($%5:/5/*6SHH Dokansv/Godk - Doc respons/Approved Datum - Date Rev. ($%5:/52(QJGDKO 2003-09-04 $ Produktbenämning - Product name %/2&.',$*5$00&3$3 Dokumentnr - Document No. Blad - Sheet .5%8HQ 1(1) I I APD Salvatore BB BB BB BB DPA MPA tp tp EPA I HPU ( ROZ 104 157/1) EPA ( ROZ 104 156/1) DC_PA ( ROZ 104 130/1) MCPA (KRB 101 1112/1) RAXCON UNIT (1/KRB 101 1112, ROA 117 8592/1) PA UNIT (2/KRB 101 1112, ROA 117 8596/1) RACO CONTROL INTERFACE ODP APD G, φ (QGPA) τ CTRL τ G, φ (QGPA) SALVATORE DE- SPREAD SPREAD R, φ DETECT G, φ (QGPA) τ, SLOPE EQUALIZER φ SLOPE EQUALIZER PILOT I/Q DETECT J1 J11J13J12J14 ODP PLL PILOT CW RMS_I_LV RF_I_LV PRD_CV VM1_I RACO_I2C_SDA VM1_Q I_START Q_START I_OFFSET Q_OFFSET RACO_L3_ON VM3_IVM3_Q VM2_IVM2_Q ERR_AV1EP_AV1 ERR_AV3 EP_AV3 ERR_I2 ERR_Q2 PRBS_O PRBS_M PHS_CV PHS_CTRL PLL_CLKPLL_DATA PLL_LD PLL_DISABLE RACO ( ROZ 104 154/1) HPU_LOOP3HPU_LOOP1 EPA_INHPU_IN MCPA_IN DPA J11J13J12J14 MPA EPA τ J2J3 FDU HPU input EPA input HPU loop 1 HPU loop 3 TX out Monitor –39 dB TX in X7 BA0 Comm X9 DSPTXDEBUG Test X11 X11 MCPA_8V Power / Signals MCPA_8V GND RACO_I2C_SCL PA_BIAS_ON PA_BIAS_ON MPA_ON MPA_ON DPA_ON DPA_ON EPA_ON EPA_ON GND -48V_OK PA_I2C_SDA PA _I2C_SCL X1 -48 V DC Power INPUT STAGE DC/DC 28 V DC/DC 8 V LDO 27.5 V MCPA_DC_IN GND I2C INTERFACE MCPA_8V PA_5.3V EPA_28V HPU_28V PA _I2C_SDAPA _I2C_SCL PA CONTROL, SUPERVISION, & ALARMS MCPA_8V MCPA_8V EPA_28V HPU_28V FILTER LDO 5.3 V DC/DC 3.3 V AUMTEX_1.8V AUMTEX_3.3V AUMTEX_5.3V RACO_8V PA_8V_RACO PA_8V_AUMTEX GND GND -48V_OK LDO 1.5 V FILTER AUMTEX_1.5V DC_RAXCON ( ROZ 104 130/2) BA1 BA2BA3 RSA485A RSA485B DSPRXDEBUG PPCTXDEBUG PPCRXDEBUG+3V3 FPGA AUC (PPC) DSP DAC ADC BUS PPC BUS UART 1 PA_I2C PA CTRL POWER_FAIL_ EARLY_N RACO_I2C DIG I/O PRBS_O PRBS_M ANALOG I/O OSC 19.44 MHz CLK CLK_OUT CLK AUMTEX( ROZ 104 155/1) HPU_LOOP3HPU_LOOP1EPA_INHPU_IN MCPA_MON MCPA_OUT SW CTRL ODP SW CTRL LOOP 3 SW CTRL LOOP 2 MMI Fault Oper Info AUMTEX_3.3V RESET ANALOG CTRL LOOP 1 Block Diagram, MCPA (KRF 111 248/1) SUPERVISION SUPERVISION LOOP 1 ADJUST LOOP 3 ADJUST LOOP 2 ADJUST τ, SLOPE EQUALIZER SW CTRL LOOP 1 CARRIER CANCELLATION (LOOP 1) SPREAD SPECTRUMSIGNAL INJECTION CARRIER CANCELLATION (LOOP 3) ERROR CANCELLATION (LOOP 2) EMALMHA Uppgjord (även faktaansvarig om annan) – Prepared (also subject responsible if other) Dokansv/Godk – Doc respons/Approved Kontr – Checked Nr – No. Datum – Date Rev File EAB/RWL/T (Anders Samuelsson) 1/1913-KRB 101 1112/1 Uen2003-02-06 B Limited internalBLOCK DIAGRAM 1(1) AGC_SS_EXT REF_EXT TEMP_READSW3_CTRLSW2_CTRLSW1_CTRL RACO_POWER_ON RS232RS232 RS485 BOARD ADR TSPINTSPOUT TSPCLKTSPSYNC RESET_IN_N LDO 5.3 V τ Level detectorDelay Circulator Directional coupler Directional coupler or circuit for addition or subtraction of signals WP_PA WP_PA EEPROM AUMTEX_8V DC/DC 1.8 V UART 2 RESET CIRCUIT FLASH SDRAM RESET GND TESTSTRB GNDWE_FLASH_N JTAG_ENABLE_N JTAG TCKJTAG TCKJTAG TDIJTAG TRST_NJTAG TDO LED RS485 SDRAM FB_ON TEMP_SALVSW4_CTRLSW5_CTRL WP_RACO EEPROM GS1 GS2 τ EQUALIZER - + REF_CLK RESET_IN_POWER_N RESET_IN_APPL_N RESET_OUT_APPL_N RACO CTRL PLL_LE WC - + - + + + - + ALT SWITCHES Reference path Main pathError path PHASE ADJUST MCPA GAIN ADJUST & OVERDRIVE PROTECTION ANALOG PREDISTORTION Reference path Main path Error path PA _I2C_DAC_SDA PA _I2C_DAC_SDA +- COMP LOG RMS

Open EXHIBIT 4 1 (4) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-12-23 A 1 EXHIBIT 4 – BLOCK DIAGRAMS AIU Contents 1 EXHIBIT 4 – BLOCK DIAGRAMS AIU 1 1.1 Block Diagram MCPA and AIU 2 1.2 AIU CSU WCDMA 1911-ROA 128 0767/1 RF Low Power Block 3 1.3 AIU FCU WCDMA 1911-ROA 128 0230/1 RF Power Block 4 Clearification Antenna Branch B on page 2 is not in use. Open EXHIBIT 4 2 (4) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-12-23 A 1.1 Block Diagram MCPA and AIU ANPB MCPA CSU AIU _ R X _ A FCU ANT_A = ANPB External port = ANPB Internal inter face ANT_B AI U _ R X _ B AI U _ R X _ D AI U _ R X _ C RPS C S U _ T X i n_A C S U _ T X i n_B CS U _ T X i n _ C CS U _ T X i n _ D AIU _ A N T _ A R B S an t e nna p o r t R B S a n t e nn a por t AI U_M ON_A LPS ANT i/f LNA Bypass TX RX LNA Bypass -3dB S_T MA RX TX CSU ANT i/f S_DMCPA S_TX_4to1 S_RX_1to4 AI U_M ON_B AIU _ AN T _ B i/f_T X_1i/f_TX_2 LPS LPC i/ f _ TX _ 2 HPCin_A1 HP C i n_ A 2 CSU _T Xout_A MCPA_inMC PA_out FCU_TXin_A CSU _T Xout_BF CU_T Xin_B HP C o u t _A 0 1 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 i/f_TX_1 0 1 0 1 S_TX_4to1 HPC LPS RFPM MCPA MCPA_inMCPA_out S_DMCPA LPC Adj. L Adj. L RPS RPS LPC Adj. L Adj. L AIU E2 LZF083256/1 RESET_OUT_APPL_N IO_A[0:20] IO_A1 IO_A0 IO_A9IO_A2IO_A3 BIT=0 CABLE_CTRL[0:5] CABLE_CTRL4CABLE_CTRL3 EBC_ADDR31 BUF_JTAG_TRST_N DEBUG[3:0] C405_TRACE[0:3] C405_E_O[0:4] X101 2 1 X107 2 1 X102 1 2 X105 LLINB 1 2 LLINA X106 2 1 RW_HALT_N BIT=0 BIT=0BIT=0 BIT=0 X103 LLIND 1 2 LLINC X104 2 1 X109 LLOUTB 1 2 LLOUTA X108 2 1 CLK_48_BUFFERED 30V_ON ASC_TMA 1(18) RSAULLI RWL/FB B2003-11-03 AIU - RAT1900 DIGITAL BOARD TOP LEVEL 1911-ROA 128 0767/1 Uen JTAG_TCK_DBC CLK_48_UNBUFFERED LZF083256/1 E1 HPC101 1 42 3 50 R101 LABEL * Ritningsregler - Drawing Rules Uppgjord (även faktaansvarig om annan - Prepared (also subject responsable if other) Produktbenämning - Product Name Dokumentnr - Document No. Dokansv/Godk - Doc Respons/Appreved ERICSSON Datum - DateRev Blad - Sheet Referenser - References ref3 ref4 * ** * CAD: VIEWLOGIC 1012-221 REF3 REF4 CIRCUIT DIAGRAM LABEL CABLE_CTRL[0:5]IO_A[0:20] LLINA LLINB LLINC LLIND LOUTA LOUTB SPI[0:2] SH3 SH4 LPS -48V_A -48V_B -48V_RTN 30V_ON ASC_TMA SH5 SH6 RAT_DC_DC -48 -48RET PRIMARYSECONDARY -5 +1.8 +3.3 +5 +30 UART1_RXD UART1_TXD COM_TEST SH14 30V_ON ASC_TMA AS_A_NAS_B_N AUX[0:5] CH_A CH_BIO_A[0:20] MODEM[0:8] SPI[0:2] SH7 SH8 MODEM FSKANTENNA MONITOR POWER MONITOR RAT_AUX AS_A_NAS_B_N BPI_DATA[0:31]BPI_RW CABLE_CTRL[0:5] CLK_19_44 CLK_48_UNBUFFERED CON_JTAG[0:5] CS_N[0:7]EBC_ADDR[6:31]GEN_IO_B[0:15]GEN_RESET_N[7:0]GEN_SER[0:2]INT_N[0:7] IO_A[0:20] JTAG_BUF[0:2] JTAG_TD_DBC_APPL LVDS[0:7] MODEM[0:8] RF_BUS[0:2] SPI[0:2] WBE_N[0:3] SH2 LVDS FPGA EPROM CONTROL CH_A CH_B CON_JTAG[0:5] GEN_IO_B[0:15] GEN_RESET_N[7:0] GEN_SER[0:2] JTAG_BUF[0:2] JTAG_TDO_RF LED[0:2] RF_BUS[0:2] SPI[0:2] RF_CONNECT SH16 -48V_A-48V_B-48V_RTN ASCI_A[0:11] ASCI_B[0:11] AUX[0:5] BPI_OE_N BPI_RW CLK_48_BUFFERED CON_JTAG[0:5] DEBUG[3:0] FLASH_VPP GEN_IO_B[0:15] IO_A[0:20] JTAG_TDO_RF JTAG_TD_DBC_APPL LVDS[0:7] MANUAL_RESET_N MODEM[0:8] PD_ASCI_A PD_ASCI_B RESET_OUT_APPL_N RW_HALT_N SYNC[0:3] UART1_RXD UART1_TXD BB_CON SH15 BUF_JTAG_TRST_N CLK_48_BUFFERED CLK_48_UNBUFFERED JTAG_BUF[0:2] JTAG_TD_DBC_APPL MANUAL_RESET_N UART1_RXD UART1_TXD CON_JTAG[0:5] JTAG_TCK_DBC DBB_INF SH17 ASCI_A[0:11] ASCI_B[0:11] BPI_DATA[0:31] BPI_OE_N BPI_RW BUF_JTAG_TRST_N CLK_19_44 CLK_48_UNBUFFERED CON_JTAG[0:5] CS_N[0:7] DEBUG[3:0] EBC_ADDR[6:31] FLASH_VPP GEN_IO_B[0:15] GEN_RESET_N[7:0] GEN_SER[0:2] INT_N[0:7] JTAG_BUF[0:2] JTAG_TD_DBC_APPL LED[0:2] MANUAL_RESET_N MODEM[0:8] PD_ASCI_A PD_ASCI_B SYNC[0:3] UART1_RXD UART1_TXD WBE_N[0:3] JTAG_TCK_DBC SH9 DBC DBM2 RAMFLASH In layoout: HPC101 HLINA1 HLINA2 HLOUTA Michael Holmgren 360P Z101 JTAG_I[0:3] SYNT[0:2] PDATA[0:23]ADR[0:4]CTRL[0:7]BUS_A[0:7] 60MHZ SW[0:6] FWD_AFWD_B Z105 360P Z104 360P JTAG_E[0:5] BIT=4BIT=0BIT=1BIT=2BIT=3 GEN_SIGNALS[0:4]CONNECT[0:5] BIT=2BIT=1BIT=0 GEN_RESET_N BIT=5BIT=4BIT=3 X101 29272523211917151311 97531 2630282422201816141210 8642 V103 YELLOW V102 GREEN V101 RED 22N Z106 Z102 360P BIT=5BIT=3BIT=2BIT=1BIT=4BIT=0 LED_Y R103 100100 R102R101 100 LZF38314/4L E1 BUS[0:2] TEMP[0:2] RSAAWI, RSALENK EAB/RWL/RR (LARS BROTAEUS) A 1 (10) 2003-09-29 AIU-1900 RF BOARD1911- ROA 128 0230/1RSALENK, RSAAWI Ritningsregler - Drawing Rules Uppgjord (även faktaansvarig om annan - Prepared (also subject responsable if other)Produktbenämning - Product NameDokumentnr - Document No.Dokansv/Godk - Doc Respons/Appreved ERICSSON Datum - Date Rev Blad - Sheet Referenser - Referencesref3ref4 +1V8 +5V +3V3 +5VAD BIAS_ABIAS_BFWD_AFWD_B TX/RX_B ANT_B TX/RX_A ANT_A MCU Sheet 9 BUS[0:2] SW[0:6] RXHLout_ARXHLout_B RXin_B RXin_A Sheet 4 RXPATH RXout_ARXout_CRXout_DRXout_B -A5V -5V LABEL 60MHZ ADR[0:4] BUS_A[0:7] CTRL[0:7] FWD_AFWD_B JTAG_I[0:3]PDATA[0:23] SW[0:6] SYNT[0:2]TEMP[0:2] RFPM Sheet 2 60MHZ ADR[0:4] BUS[0:2] BUS_A[0:7] CONNECT[0:5] CTRL[0:7] GEN_RESET_N GEN_SIGNALS[0:4] JTAG_E[0:5] JTAG_I[0:3] PDATA[0:23] SW[0:6] SYNT[0:2] TEMP[0:2] FPGA JTAG BUFFER CONTROL Sheet 10 CAD: VIEWLOGIC1012-221REF3REF4 CIRCUIT DIAGRAM LED_RSPI_CLKSPI_DATA_INSPI_DATA_OUTGEN_RESET_NPROG_DATAPROG_CLKnCONFIGLED_GCONF_DONE -5V 1.8V3.3VIRQ_NJTAG_BUF_ENJTAG_TDIJTAG_TRST_NJTAG_CLK_APPLJTAG_TMS_APPLJTAG_TDO5V1.8V0VSPI_RF_NBIAS_BnSTATUSSAMPLE_STARTBIAS_A 0V

Open EXHIBIT 13 1 (1) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-12-19 A B5KAKRB1011112-2 Federal Communications Commission Authorization & Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Attention: Equipment Authorization Branch SP Sveriges Provnings- och ForskningsInstitut Brinellgatan 4 Box 857 S-501 15 Borås Sweden December 19, 2003 Subject: Certification for FCC ID: B5KAKRB1011112-2 Gentlemen; Ericsson AB requests a Grant of Certification (Type Acceptance) for the above mentioned FCC Identifier. This base station multi carrier power amplifier (used as a single carrier amplifier) are designed for use in the WCDMA 1900 MHz cellular telephone system. The transmitter will operate at 1930.0 to 1970.0 MHz. The base station operates in the A, B, D and E-band in the 1900 MHz broadband PCS services as per 47 CFR Part 24 subpart E. It meets the requirements of 3GPP specification for operation in WCDMA cellular systems. This base station multi carrier power amplifier will in normal mode operate at a nominal power out of 20 watts at the antenna connector. Ericsson AB requests confidentiality under CFR 0.459. Confidentiality for the following exhibits is requested: Exhibit 5 Schematics. Exhibit 8 Internal Manual Justification of this request is in order to protect the large investment in developing this technology and to facilitate the circuit miniaturization utilized in this design and protect the innovative design as well as proprietary techniques which are implemented. In order to protect Ericsson’s competitive advantage on these proprietary techniques, we request the above listed exhibits be held as confidential and withheld from the Public Information File. If additional information is needed, please contact me on the below listed number. Sincerely, Larry Lindström Staff Engineer, Regulatory Programs Ericsson AB Torshamnsgatan 21-23 (Färögatan 6) Kista, SE-164 80 Stockholm Sweden Telephone No.: +46 8 764 12 73 Fax No.: +46 8 404 44 20 e-mail [email protected]

Photos Amplifier Unit, KRB 101 1112/2, R1A Front side Back side Top side Bottom side Antenna interface unit, KRC 101 1451/3, R1B Front side Back side Top side Bottom side

Photos Amplifier Unit, KRB 101 1112/2, R1A FCC ID Front side Antenna interface unit, KRC 101 1451/3, R1B FCC ID Label Placement, Front side

Photos Amplifier Unit, KRB 101 1112/2, R1A Board 1 component side Board 1 back side Board 1 removed Board 2, component side Board 2, component side with transistor holdings and filter removed Board 2, back side Antenna interface unit, KRC 101 1451/3, R1B Board 1 component side Board 1 back side Board 1 removed Board 2 component side Board 2 back side Filter

Open EXHIBIT 12 1 (13) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-12-19 A Exhibit 12 – Cover Sheet Contents 1 2.1033(c) Circuit Description 2 1.1 (2) FCC Identifier: B5KAKRB1011112-2 2 1.2 (4) Type of Emission: N/A 2 1.3 (5) Frequency range: 1930 to 1970 MHz 2 1.4 (6) Range of Operating Power: 2 1.5 (7) Maximum Power Rating: 2 1.6 (8) Final Amplifier Voltage and Current in normal operation 2 1.7 (10) Frequency Stabilizing Circuit Description 3 1.8 (10) Spurious and Harmonic Suppression 3 1.9 (10) Limiting Power 3 1.10 (10) Digital Modulation QPSK 3 Open EXHIBIT 12 2 (13) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-12-19 A 1 2.1033(c) Circuit Description 1.1 (2) FCC Identifier: B5KAKRB1011112-2 This MCPA (Multi Carrier Power Amplifier) consist of one power amplifier operating in the frequency band of 1930 to 1990 MHz. The amplifier is capable of operation in a WCDMA system. 1.2 (4) Type of Emission: N/A The MCPA is a plain power amplifier: 1.3 (5) Frequency range: 1930 to 1970 MHz The output signal from the MCPA passes a cavity band pass filter in the antenna interface system (AIU) which pass band is 1930 to 1970 MHz. 1.4 (6) Range of Operating Power: This transmitter is designed to supply a nominal power level of 43 dBm at the antenna connector at the AIU. 1.5 (7) Maximum Power Rating: The maximum power rating with one TRX under environmental and supply voltage variations is equal to 43 dBm plus a power level tolerance of + 1.0 dB. Therefore the maximum output power is 44 dBm equal to 25 W at the antenna connector (AIU) of the radio base station. This output is linked to the input signal to the AIU which shall be maximized to 8.5 dBm. 1.6 (8) Final Amplifier Voltage and Current in normal operation Average Output Power 43 dBm Values for V2001, V2002 Collector Voltage 28.0 Volt DC Collector Current 7.5 Amps DC Open EXHIBIT 12 3 (13) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-12-19 A 1.7 (10) Frequency Stabilizing Circuit Description The MCPA is a plain power amplifier: 1.8 (10) Spurious and Harmonic Suppression The output signal from MCPA passes a cavity band pass filter in the antenna interface system (AIU). 1.9 (10) Limiting Power The MCPA measures the output power at its output connector via a RF-detector and the detected value is used by the power loop control block to steer the three amplifiers between the input and the output of the amplifier. 1.10 (10) Digital Modulation QPSK The power amplifier is intended for amplification of QPSK-modulated signals in a WCDMA system.

Open EXHIBIT 10 1 (19) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-11-26 A Exhibit 10 – Components, Tune Up Contents 1 2.1033 (c) (10) Function of Active Circuit Devices ......................... 2 1.1 AMPLIFIER PA UNIT KRY 112 82/1 .............................................. 2 1.1.1 PA PRINTED BOARD ASSEMBLY ROA 128 0713 ....................... 2 1.1.1.1 FUNCTION BLOCK DC/DC PA ROZ 104 130/1 ............................ 2 1.1.1.2 FUNCTION BLOCK PA BOARD ROZ 104 249/1........................... 6 1.2 RADIO CONTROL UNIT KRY 101 1918/1..................................... 8 1.2.1 RAXCON PRINTED BOARD ASSEMBLY ROA 128 0721 ............ 8 1.2.1.1 FUNCTION BLOCK DC/DC PA ROZ 104 130/1 ........................... 8 1.2.1.2 FUNCTION BLOCK AUMTEX 1911-ROZ 104 155/1 .................. 12 1.2.1.3 FUNCTION BLOCK RAXCON 1911-ROZ 104 247/1.................. 13 2 2.1033(c)(9) Tune-Up Procedure ................................................. 18 3 2.1033(c)(9,10) Power Tune-Up – Power Limiting ....................... 19 Open EXHIBIT 10 2 (19) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-11-26 A 1 2.1033 (c) (10) Function of Active Circuit Devices 1.1 AMPLIFIER PA UNIT KRY 112 82/1 Product KRY 112 82/1 Revision B Pos Prod name/Func des Product number 7 TRANSISTOR/MRF19030 , RF Power FET RYN 123 1642/1 9 TRANSISTOR/Transistor RF Power RYN 123 1654/1 1.1.1 PA PRINTED BOARD ASSEMBLY ROA 128 0713 1.1.1.1 FUNCTION BLOCK DC/DC PA ROZ 104 130/1 Product ROZ 104 130/1 Revision Z Pos Prod name/Func des Product number N5000 MICROCIRCUIT/CONTROLLER HOT SWAP NEG. VOLT. RYT 126 6013/3C N5001 OPTOCOUPLER/CTR=200-600 RYR 351 210/2 N5002 OPTOCOUPLER/CTR=200-600 RYR 351 210/2 N5100 MICROCIRCUIT/REG LIN+ 3.3V 200mA RYT 113 090/2C N5101 MICROCIRCUIT/PWM 5.0V +/-1.5% 1MHz RYT 113 6053/4 N5102 OPTOCOUPLER/CTR=200-600 RYR 351 210/2 N5103 MICROCIRCUIT/LM431 ADJ REGULATOR RYT 113 008/3C N5200 MICROCIRCUIT/REG SW- ADJ IN=5.5V-60V 1.5A RYT 113 6363/1 N5201 MICROCIRCUIT/Triple-Voltage uP Supervisory RYT 113 291/C N5300 MICROCIRCUIT/LINEAR CONTROLLER RYT 113 6355/1 N5401 MICROCIRCUIT/10 Bit 4-channel A/D w/ temp s RYT 120 6033/2C N5500 OPTOCOUPLER/CTR=200-600 RYR 351 210/2 N5501 MICROCIRCUIT/LM431 ADJ REGULATOR RYT 113 008/3C N5502 MICROCIRCUIT/REG LIN+ 5.0V 50mA 0.225V RYT 113 6057/1 N5503 MICROCIRCUIT/OSCILLATOR 1 to 30MHz RYT 108 6018/1 N5504 MICROCIRCUIT/74'4017 HC SOP16 DECADE J:SON RYT 306 6001/C N5505 MICROCIRCUIT/74'08 HC SOP14 4X2 AND RYT 304 0008/C N5506 MICROCIRCUIT/COMP 2.7V 50ns OPEN DRAIN RYT 101 6342/1 N5600 MICROCIRCUIT/PWM RYT 113 476/C N5601 MICROCIRCUIT/COMP 2.7V 50ns OPEN DRAIN RYT 101 6342/1 N5602 MICROCIRCUIT/OPAMP 3V OUT=R/R 130MHz RYT 101 6343/1 Open EXHIBIT 10 3 (19) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-11-26 A N5700 MICROCIRCUIT/PWM RYT 113 476/C N5701 MICROCIRCUIT/COMP 2.7V 50ns OPEN DRAIN RYT 101 6342/1 N5702 MICROCIRCUIT/OPAMP 3V OUT=R/R 130MHz RYT 101 6343/1 N5800 MICROCIRCUIT/PWM RYT 113 476/C N5801 MICROCIRCUIT/COMP 2.7V 50ns OPEN DRAIN RYT 101 6342/1 N5802 MICROCIRCUIT/OPAMP 3V OUT=R/R 130MHz RYT 101 6343/1 T5100 TRANSFORMER/FORWARD REG 527 2006 T5101 TRANSFORMER/Current Transformer 4900uH REG 135 79/1 T5600 TRANSFORMER/Planar E18, 48/28V 4,5A REG 272 2001/1 T5601 TRANSFORMER/Current Transformer 1400uH REG 135 79/2 T5602 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5603 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5604 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5605 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5700 TRANSFORMER/Planar E18, 48/28V 4,5A REG 272 2001/1 T5701 TRANSFORMER/Current Transformer 1400uH REG 135 79/2 T5702 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5703 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5704 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5705 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5800 TRANSFORMER/Planar E18, 48/28V 4,5A REG 272 2001/1 T5801 TRANSFORMER/Current Transformer 1400uH REG 135 79/2 T5802 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5803 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5804 TRANSFORMER/FET Driver Transformer REG 604 08/1 T5805 TRANSFORMER/FET Driver Transformer REG 604 08/1 V5000 TRANSIENTPROTECTOR/TVS ZEN bidir 64V SMC 1.5kW(10 RKZ 223 606/4 V5001 TRANSISTOR/NFET 100V 140A Max247 with pre RYN 123 123/2 V5003 TRANSISTOR/NFET SS 60V 100mA SOT23 7.5ohm RYN 123 614/1 V5100 RECTIFIER/REC SCH x2 60V 2x15A D2PAK com RKZ 323 6046/1 V5102 RECTIFIER/REC 200V 1A SMA 35ns RKZ 123 05/2 V5103 TRANSISTOR/Nfet 200V 24A D2PAK 0.1 RYN 123 272 V5104 DIODE/SWI x2 70V 200mA SOT23 com.cat RKZ 123 03/3 V5106 TRANSISTOR/PNP SS 60V 600mA SOT23 hFE>100 RYN 120 12/1 V5170 RECTIFIER/REC SCH x2 60V 2x15A D2PAK com RKZ 323 6046/1 V5200 RECTIFIER/REC SCH 100V 1A SMB RKZ 323 27/1 V5201 DIODE/SWI x2 70V 200mA SOT23 serial RKZ 123 03/1 V5203 RECTIFIER/REC 200V 1A SMA 35ns RKZ 123 05/2 V5204 RECTIFIER/REC 200V 1A SMA 35ns RKZ 123 05/2 V5205 RECTIFIER/REC 200V 1A SMA 35ns RKZ 123 05/2 V5300 TRANSISTOR/PFET 55V 74A D2PAK 20mohm(10V) RYN 122 670/2 V5301 TRANSISTOR/PNP 80V 1A SOT223 hFE63-160(15 RYN 120 615/1 V5302 ZENERDIODE/ZEN 15.0V 5% 0.2W SOT23 RKZ 223 01/20 V5303 DIODE/SWI x2 70V 200mA SOT23 com.cat RKZ 123 03/3 V5400 DIODE/SWI x2 70V 200mA SOT23 com.cat RKZ 123 03/3 Open EXHIBIT 10 4 (19) Prepared (also subject responsible if other) No. EAB/RWG/RB Larry Lindström B5KAKRB1011112-2 Approved Checked Date Rev Reference KI/EAB/RWG/RB (L Lindström) 2003-11-26 A V5401 DIODE/SWI x2 70V 200mA SOT23 com.cat RKZ 123 03/3 V5501 ZENERDIODE/ZEN 3.9V 5% 0.2W SOT23 RKZ 223 01/6 V5600 TRANSISTOR/NFET 100V 6A SO8 26mohm(10V) V RYN 123 6032/1 V5601 TRANSISTOR/NFET 100V 6A SO8 26mohm(10V) V…

Text truncated - open the document above for the full version.

REPORT Datum/Date Beteckning/Reference Sida/Page 2003-12-19 F326326-F24 1 (1) FCC ID: B5KAKRB1011112-2 Encl. 1 Sign:..... Description - Equipment Under Test (EUT) Equipment: WCDMA Base station amplifier unit used in single carrier configuration. Frequency range: 1930 MHz to 1970 MHz Tested channels: 1932.5 MHz, 1947.5 MHz, and 1967.5 MHz. Product number: KRB 101 1112/2, R1A Serial numbers: See Hardware list in enclosure 7 The RF conducted measurements were done at the output connectors on top of the base station. TRXB ROJ 119 2233/1 WCDMA transceiver units were used to generate the carrier channels. The identities of the units used can be found in the hardware list on encl. 7. Configuration: The transmitters were set-up according to 3GPP TS 25.141 V6.3.0 (2003-09) Test model 1. 16 DPCH:s at 30 ksps (SF=128) distributed randomly across the code space, at random power levels and random timing offsets are defined so as to simulate a realistic scenario which may have high PAR (Peak to Average ratio). Manufacturer’s representative: Larry Lindström, Ericsson AB Purpose of test The purpose of the t…

Text truncated - open the document above for the full version.