BCR-RPT-MR303V-90Repeater

User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 126-Oct-2000 User's Manual for MR303D Varia Id.-Nos.: 152796, 152797 & 154595 User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 226-Oct-2000 Copyright  MIKOM, Buchdorf 2000 All rights reserved. No parts of this publication may be reproduced, stored in a retrieval system, transmitted in any form or by any means, electronical, mechanical photocopying, recording or otherwise, without prior written permission of the publisher. User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 326-Oct-2000 TABLE OF CONTENTS LIST OF FIGURES AND TABLES4 LIST OF ABBREVIATIONS4 CONTENTS OF DELIVERY5 HEALTH AND SAFETY WARNINGS5 PREAMBLE6 1INTRODUCTION8 1.1The MR303D Varia8 1.2Functional Description9 1.3Downlink9 1.4Uplink10 2FUNCTIONS AND FEATURES11 2.1Configuration of the Connectors11 2.1.1RF Connectors11 2.1.2Power supply12 2.2Configuration of the LEDs12 2.3Mechanical Installation13 2.4Electrical Installation14 3SETTING INTO OPERATION17 3.1Adjusting the Frequency17 3.2Setting the Attenuation17 4APPENDIX18 4.1Electrical Specification18 4.2Mechanical Specification19 4.3Environmental and Safety Specifications19 4.4Spare part list20 INDEX20 User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 426-Oct-2000 LIST OF FIGURES AND TABLES figure 1-1 Block diagram............................................................................................9 figure 2-1 Configuration of the connectors...............................................................11 figure 2-2 Installation drawing...................................................................................13 figure 3-1 Channel setting for Id.No. 152796 & 154595...........................................17 figure 3-2 Channel setting for Id.No. 152797............................................................17 figure 3-3 Usage of rotary switch for attenuation setting..........................................17 figure 4-1 Cabinet drawing........................................................................................19 LIST OF ABBREVIATIONS ALCAutomatic Level Control BCCHBroadcast Control Channel BITEBuilt In Test Equipment BTSBase Transceiver Station CEPTConférénce Europe ́ennedes Postes et Telecommunications D.I.C.E.Distributed Indoor Coverage Equipment DLDownl ink ESDElectrostatic Discharge ETSEuropean Telecommunication Standard FSKFrequency Shift Keying GSMGlobal System for Mobile communication Id.-No.Identification Number IFIntermediate Frequency LMTLocal Maintenance Timeout OMCOperation and Maintenance Centre PABXPrivate Automatic Branch Exchange PCMCIAPersonal Computer Modem Communication International Association PSTNPublic Switched Telephone Network RevRevision RFRadio Frequency RLPRadio Link Protocol RSSIReceive Signal Strength Indication ULUpli nk User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 526-Oct-2000 CONTENTS OF DELIVERY Qty1Repeater MR303D Varia Qty1User’s manuals for repeater MR303D Varia Qty1Set of test protocols consisting of an electrical acceptance test protocol and a safety test protocol regarding the power supply Qty1Wall mounting template HEALTH AND SAFETY WARNINGS F Note: Electrical installation must be carried out in accordance with the safety regulations of the local authorities. Due to safety reasons, electrical installation must be conducted by qualified personnel only. The cover of this unit should not be opened while power is applied. Subsequent installations, commissioning and maintenance activities that require the unit to be under power while the cover is open, must only be carried out by suitably qualified personnel. F Note: ESD precautions must be observed! Before commencing main- tenance work, disconnect the repeater from mains. User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 626-Oct-2000 PREAMBLE In cellular systems, repeaters are used to extend the coverage of a base station in regions where, due to topological or structural conditions, weak field strengths disable communication. MIKOM is a leading manufacturer of repeaters, providing excellent electrical characteristics. The repeaters are light-weight and easy to install. MIKOM repeaters provide a preferred solution for extended cellular coverage. This repeater has been built using only highly reliable materials. A comprehensive quality assurance has been carried out on all fabrication steps, ensuring constant quality of the product. Every repeater leaves the factory only after a thorough final acceptance test, accompanied by a test certificate, which guarantees perfect function. Any intervention must be carried out by authorised persons only. If technical assistance for the repeater MR303D Varia is needed, contact the local sales office (see List of international sales offices on the following page) or contact MIKOM directly at the following address: When set-up is performed according to this manual, the repeater will operate without complications for a significant length of time. MIKOM GmbH Industriering 10 86675 Buchdorf Germany Tel: +49 (0) 9099 69 0 Fax: +49 (0) 9099 69 31 email: [email protected] http://www.mikom.com User’s Manual for Repeater MR303D Varia M0041A8B.docId.-No. 153114Page 726-Oct-2000 List of international sales offices Allen TelecomAllen Telecom (Australia) P/L Forem France 30500 Bruce Industrial Parkway 6 Stuart StreetZ.I. des Ebisoires Cleveland, Ohio 44 139-3996Padstow NSW 221178370 Plaisir USAAustraliaFrance Phone: +1 ( 216 ) 349-8657Phone: +61 (2) 9774-4200Phone: +33-1-30-79-15-30 FAX: +1 ( 216 ) 349-8408FAX: +61 (2) 9774-4500FAX: +33-1-30-55-55-37 FOREM S.p.A.AT SingaporeAT China Via Archimede N. 22/2480 Marine Parade RoadCITIC Building, # 11-05 20041, Agrate Brianza#19-1 Parkway Parade19 Jiangguomenwai Avenue MilanSingapore 449269Beijing ItalyChina 100004 Phone: +39-39-605-41 Phone: +65-345-8022Phone: +86-10-6508-3088 FAX: +39-39-605-4477FAX: +65-345-8033FA…

Text truncated - open the document above for the full version.

Block Diagram

REQUEST FOR CONFIDENTIALITY Allen Telecom Systems would like to request confidentiality with regard to the following documents in the filing for equipment approval identified by the FCC ID. No. BCR-RPT-MR303V-90 (1) Schematic diagrams contained in electronic file identified as schematics.pdf. It is the opinion of Allen Telecom Systems that disclosure of this information would result in significant loss of revenue. This information should be kept confidential for 10 years.

External photo FCC ID: BCR-RPT-MR303V

TM Repeater: MR303 B Varia Uplink: 890-915 Varia MHz Downlink: 935-960 Varia MHz Id-No.: 149110 Rev.: 01 SN.: Supply (6.7VDC/2A Typ) FCC ID: BCR-RPT-MR303V-24 BCR-RPT-MR303V-90 Canada:

Internal photos FCC ID: BCR-RPT-MR303V

Operational Description for the MR303D Varia The repeater MR303D Varia is a bi-directional amplifier with adjustable RF-bandwidth. The first and the last channel of the transmission bandwidth can be set manually by means of rotary switches. The repeater has been designed for applications in medium sized rooms such as suites, offices and basements. A quality connection with a mobile phone can usually not be established in these rooms. The repeater is equipped with a connector for an external receiving/transmitting antenna which provides the RF connection to the mobile. Connection to the BTS can be established via an outdoor antenna. Other components of the D.I.C.E. COAX system can also be connected to the repeater. The final amplifiers are protected by individual level limiters, which allow the mobile unit to be operated in close proximity to the repeater. Third order intermodulation products are kept below the CEPT limit of -36 dBm constantly, even if the repeater receives the signals of more than one mobile unit.

154595MR303 D Varia UL:890,0-915,0 Varia MHz G0783ZK A StufePos.ObjObjektId RevStdDokumentVersSortBegr.PosTextBGrMengeME .10010@A6@151106Assembly MaterialX1,000ST ..20010@A6@153641Gehäuse Obere HalbschaleG0783GDB2,000ST ..20020@A6@148437Gehäuse Untere HalbschaleG0825G0BX2,000ST ...30010@[email protected] 1 F28 458x12,0x303 ±1,00,400ST ..20030@A6@153644Radom plastic coverG0738GJC1,000ST ..20040@A6@143991Deckel (Federkontakt)G0738B0B20,000ST ..20050@A6@146719Deckel (Federkontakt)G0738B3B2,000ST ..20060@A6@141738Zylinderstift W.st.1.4305 Ø1h8x6mm DIN74,000ST ..20070@A6@10132SKS M2,0x12 DIN965 WSt:1.43014,000ST ..20080@A6@10025SKS M2,0x5 DIN965 WSt:1.430140,000ST ..20090@A6@149323Schraubsockel für Kabelbinder2,000ST ..20100@A6@10504LKS M3,0x6 DIN7985 WSt:1.43012,000ST ..20110@A6@152100SMA-Buchse 50,0Ohm 4-Loch,gewinkelt1,000ST ..20120@A6@10371LKS M2,0x4 DIN7985 WSt:1.43014,000ST ..20130@A6@153646Mounting bracketG0783B3A1,000ST ..20140@A6@153634LKS DIN85 M2,5x6 Polyamid 6.64,000ST .10020@A6@151088Platine best.1396.2 WSt:FR4P1396B0EX1,000ST ..20010@A6@151087Platine roh 1396.2 WSt:FR4P1396P0B1,000ST ..20020@A6@7914Wid SMD 0,0Ohm ±5%,0,125W,08054,000ST ..20030@A6@7971Wid SMD 5,6Ohm ±5%,0,125W,08052,000ST ..20040@A6@8029Wid SMD 12,0Ohm ±5%,0,125W,08053,000ST ..20050@A6@8045Wid SMD 15,0Ohm ±5%,0,125W,08054,000ST ..20060@A6@8052Wid SMD 16,0Ohm ±5%,0,125W,08054,000ST ..20070@A6@8102Wid SMD 27,0Ohm ±5%,0,125W,08052,000ST ..20080@A6@8144Wid SMD 43,0Ohm ±5%,0,125W,08056,000ST ..20090@A6@8151Wid SMD 47,0Ohm ±5%,0,125W,08051,000ST ..20100@A6@8169Wid SMD 51,0Ohm ±5%,0,125W,08058,000ST ..20110@A6@8177Wid SMD 56,0Ohm ±5%,0,125W,08052,000ST ..20120@A6@8193Wid SMD 68,0Ohm ±5%,0,125W,08052,000ST ..20130@A6@8722Wid SMD 0,0Ohm ±5%,0,25W,12062,000ST ..20140@A6@12039Wid SMD 220,0Ohm ±5%,0,25W,12062,000ST ..20150@[email protected] 1,0pF ±0,25pF,50V,08051,000ST ..20160@[email protected] 2,2pF ±0,25pF,08051,000ST ..20170@[email protected] 3,3pF ±0,25pF,08055,000ST ..20180@[email protected] 4,7pF ±0,25pF,50V,08053,000ST ..20190@A6@15321Universaldiode SMD LL4148 100,0V 150mA10,000ST ..20200@A6@23663Bipolarer Transistor PNP BCX17 100MHz6,000ST ..20210@A6@23861Bipolarer Transistor NPN BCX19 150MHz5,000ST ..20220@A6@41715Pindiode BA679-GS18 30V 0,050A MiniMELF8,000ST ..20230@A6@42010Spule SMD 100nH ±5% 1206 verg.Keramikk.4,000ST ..20240@A6@51078Spule SMD 68nH ±5% 1206 verg.Keramikk.2,000ST ..20250@A6@53751Leuchtdiode Ø3mm rot1,000ST ..20260@A6@56168Spule SMD 270nH ±5% 1206 verg.Keramikk.1,000ST ..20270@A6@57877IC SMD LM393M SO8 2fach Komparator8,000ST ..20280@A6@58446Spule SMD 220nH ±5% 1206 verg.Keramikk.1,000ST ..20290@A6@61440Schottky-Diode SMD BAS70-04 -70V7,000ST ..20300@A6@62877Spule SMD 1μH ±5% 1206 verg.Keramikk.7,000ST ..20310@A6@67045Kontaktstreifen Klebemon.Tender Finger0,040M ..20320@A6@68668Wid SMD 15,0Ohm ±5%,0,25W,12062,000ST ..20330@A6@70300Spule SMD 47nH ±5% 1206 verg.Keramikk.2,000ST ..20340@A6@75564Spule SMD 12nH ±10% 1206 verg.Keramikk.4,000ST ..20350@A6@75655Spule SMD 330nH ±5% 1206 verg.Keramikk.23,000ST ..20360@[email protected] SMD LTC1044CS8 -1,5-12V2,000ST ..20370@A6@90092Zenerdiode SMD ZMM4,3 4,3V,0,5W,MiniMELF2,000ST ..20380@[email protected] 100,0pF 50V,06034,000ST ..20390@A6@99200Wid SMD 820,0Ohm ±5%,0,25W,12061,000ST ..20400@A6@106047IC SMD 74HC244D SO20 Octal 3 statedriver1,000ST ..20410@A6@110130Miniatur-SMD-Isolator 0,947GHz1,000ST ..20420@A6@117549Spule SMD 22nH ±5% 1206 verg.Keramikk.1,000ST ..20430@A6@117556Spule SMD 33nH ±5% 1206 verg.Keramikk.4,000ST ..20440@A6@117572Spule SMD 120nH ±5% 1206 verg.Keramikk.2,000ST ..20450@A6@118653MMS-Buchse 50,0Ohm5,000ST ..20460@[email protected],0μF 25V,Baugröße A10,000ST ..20470@A6@130666Dämpfungsglied 30dB SO-16 AT220 4Bit2,000ST ..20480@[email protected] 0,5pF ±0,25pF,06033,000ST ..20490@[email protected] 1,0pF ±0,25pF,06031,000ST ..20500@[email protected] 2,2pF ±0,25pF,0603,NPO5,000ST ..20510@[email protected] 47,0pF ±5%,0603 50V19,000ST ..20520@[email protected] 10,0pF ±0,25pF,06035,000ST ..20530@[email protected] 1,0nF ±5%,0603 COG/NPO294,000ST ..20540@A6@131706Wid SMD 0,0Ohm ±2%,0,063W,060367,000ST ..20550@A6@131714Wid SMD 12,0Ohm ±1%,0,063W,06031,000ST ..20560@A6@131722Wid SMD 18,0Ohm ±1%,0,063W,06035,000ST ..20570@A6@131730Wid SMD 47,0Ohm ±1%,0,063W,06033,000ST ..20580@A6@131748Wid SMD 100,0Ohm ±1%,0,063W,060310,000ST ..20590@A6@131755Wid SMD 180,0Ohm ±1%,0,063W,06034,000ST ..20600@A6@131763Wid SMD 220,0Ohm ±1%,0,063W,060319,000ST ..20610@A6@131771Wid SMD 270,0Ohm ±1%,0,063W,06032,000ST ..20620@A6@131789Wid SMD 820,0Ohm ±1%,0,063W,06032,000ST ..20630@A6@131797Wid SMD 1,0kOhm ±1%,0,063W,060314,000ST ..20640@A6@131805Wid SMD 1,8kOhm ±1%,0,063W,06031,000ST ..20650@A6@131821Wid SMD 3,3kOhm ±1%,0,063W,06032,000ST ..20660@A6@131847Wid SMD 10,0kOhm ±1%,0,063W,060334,000ST ..20670@A6@131854Wid SMD 100,0kOhm ±1%,0,063W,060315,000ST ..20680@A6@133835OP-Single Supply LM258DR2 SO-8 2 Systeme3,000ST ..20690@A6@134700Wid SMD 2,7kOhm ±1%,0,063W,06032,000ST ..20700@A6@138875Wid SMD 1,0Ohm ±5%,0,125W,08054,000ST ..20710@A6@138909Wid SMD 1,8Ohm ±5%,0,125W,08053,000ST ..20720@A6@140201IC SMD 74 HC 00 NAND-Gatter1,000ST ..20730@A6@140381Wid SMD 10,0Ohm ±1%,0,063W,06038,000ST ..20740@A6@140482GaAs-Fet Verstärker CLY 51,000ST ..20750@A6@140483GaAs-Fet Verstärker CLY 101,000ST ..20760@A6@141902Leuchtdiode Ø3mm rot/grün LDE 3021,000ST ..20770@A6@141957Filter NFM4516P13C204FT16,000ST ..20780@A6@141958Filter NFM3212R13C471RT112,000ST ..20790@[email protected],7μF SMD 10V,Elko-Tantal32,000ST ..20800@A6@142305ENH-MOSFET-N Typ:BSS 138 GEG3,000ST ..20810@[email protected] 100,0nF 16,0V,0603,±10%4,000ST ..20820@[email protected] 56,0pF 63,0V,06034,000ST ..20830@A6@142714Wid SMD 22,0kOhm ±1%,0,063W,06034,000ST ..20840@A6@142715Wid SMD 470,0Ohm ±1%,0,063W,06032,000ST ..20850@A6@142806SAW Filter TFS195X bw25MHz fc195MHzD142806C2,000ST ..20860@A6@142825IC SMD MAX471CSA Current-Sense Amplifier2,000ST ..20870@A6@142899SAW Filt…

Text truncated - open the document above for the full version.

Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal:24.00(dBm) Maximum peak output power at antenna input terminal:251.1886432(mW) Antenna gain(typical):0(dBi) Maximum antenna gain:1(numeric) Prediction distance:20(cm) Prediction frequency:824(MHz) MPE limit for uncontrolled exposure at prediction frequency:0.533333333(mW/cm^2) Power density at prediction frequency:0.049972(mW/cm^2) Maximum allowable antenna gain:10.28268583(dBi) 2 4R PG S π =

Master: ktlPT90PLMR Date: April 19, 1999 Nemko Test Report: 1L0388RUS2 Applicant: Allen Telecom 140 Vista Center Drive Forest, VA 24551 Equipment Under Test: Repeater MR303 Varia (E.U.T.) In Accordance With: FCC Part 90, Subpart I Private Land Mobile Repeater Tested By: Nemko Dallas Inc. 802 N. Kealy Lewisville, TX 75057-3136 Authorized By: Tom Tidwell, Wireless Group Manager Date: 10/18/01 Total Number of Pages: 60 Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: MR303 Varia PROJECT NO.: 1L0388RUS2 Page 2 of 2 Table of Contents Section 1. Summary of Test Results.................................................................................................3 Section 2. General Equipment Specification......................................................................................5 Section 3. RF Power Output.............................................................................................................8 Section 4. Occupied Bandwidth........................................................................................................9 Section 5. Spurious Emissions at Antenna Terminals......................................................................26 Section 6. Field Strength of Spurious Emissions..............................................................................45 Section 7. Frequency Stability.........................................................................................................49 Section 8. Test Equipment List.......................................................................................................50 ANNEX A - TEST METHODOLOGIES............................................................................................51 ANNEX B - TEST DIAGRAMS.........................................................................................................57 Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: MR303 Varia PROJECT NO.: 1L0388RUS2 Page 3 of 3 Section 1. Summary of Test Results Manufacturer: Allen Telecom Model No.: 149110 Serial No.: 1576 General: All measurements are traceable to national standards. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 90, Subpart I. New Submission Production Unit Class II Permissive Change Pre-Production Unit T N B Equipment Code THIS TEST REPORT RELATES ONLY TO THE ITEM(S) TESTED. THE FOLLOWING DEVIATIONS FROM, ADDITIONS TO, OR EXCLUSIONS FROM THE TEST SPECIFICATIONS HAVE BEEN MADE. See “ Summary of Test Data”. NVLAP LAB CODE: 100426-0 Nemko Dallas Inc. authorizes the above named company to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Dallas Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. This report applies only to the items tested. Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: MR303 Varia PROJECT NO.: 1L0388RUS2 Page 4 of 4 Summary Of Test Data NAME OF TEST PARA. NO. SPEC. RESULT RF Power Output 90.205 < Rated Complies Audio Frequency Response TIA EIA-603.3.2.6 N/A N/A Audio Low-Pass Filter Response TIA EIA-603.3.2.6 N/A N/A Modulation Limiting TIA EIA-603.3.2.6 N/A N/A Occupied Bandwidth 90.210 Plots Complies Spurious Emissions at Antenna Terminals 90.210 Plots Complies Field Strength of Spurious Emissions 90.210 < Rated Complies Frequency Stability 90.213 N/A N/A Transient Frequency Behavior 90.214 N/A N/A Footnotes For N/A’s: (1) Since the E.U.T. does not contain modulation circuitry modulation testing was not performed. (2) Since the E.U.T. is not a keyed carrier system, Transient Frequency Behavior was not performed. (3) Since the E.U.T. is a repeater there was no need for frequency stability. . Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: MR303 Varia PROJECT NO.: 1L0388RUS2 Page 5 of 5 Section 2. General Equipment Specification Transmitter Supply Voltage Input: 115 Vac Frequency Range: Uplink 896-901 MHz Downlink 935-940 MHz Tunable Bands: Complete coverage Type(s) of Modulation: 2FSK 4FSK F2D (Voice) D7W (QAM) Other Gain: 58 dB Maximum Input: +10 dBm without damage Output Impedance: 50 ohms RF Power Output (rated): Uplink +24 dBm Downlink +8 dBm Channel Spacing(s): 12.5 kHz Operator Selection of Operating Frequency: Complete band coverage Power Output Adjustment Capability: Manual Frequency Translation: F1-F1 F1-F2 N/A Band Selection: Software Duplexer Change Fullband Coverage Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: MR303 Varia PROJECT NO.: 1L0388RUS2 Page 6 of 6 Description of Modifications For Class II Permissive Change Modifications Made During Testing Nemko Dallas FCC PART 90, SUBPART I PRIVATE LAND MOBILE REPEATER EQUIPMENT: MR303 Varia PROJECT NO.: 1L0388RUS2 Page 7 of 7 Theory of Operation The repeater MR303 Varia is a bi-directional amplifier with adjustable RF-bandwidth. The first and the last channel of the transmission bandwidth can be set manually by means of rotary switches. The repeater has been designed for applications in medium sized rooms such as suites, offices and basements. A quality connection with a mobile phone can usually not be established in these rooms. The repeater is equipped with a connector for an external receiving/transmitting antenna which provides the RF connection to the mobile. Connection to the BTS can be established via an outdoor antenna. Other components of the D.I.C.E. COAX system can also be connected to the repeater. The final amplifiers are protected by individual level limiters, which allow the mobile unit to be operated in close proximity to the repeater. Third order intermodulation products are kept below t…

Text truncated - open the document above for the full version.

RF DC Currents & Voltages RF power output 0.1W for all modulation schemes DC voltage -36 to -72 VDC Remote Current consumption @-48V = less than .35A Donor Current consumption @-48V = less than .5A When donor is powering the remotes total current consumption = .5+4*.35 = 1.9A @-48V

Test setup photos FCC ID: BCR-RPT-MR303V