BGBCP-C60DWDigital Color Printer

DIGITAL COLOR PRINTER MODEL CP-C60DW-WE OPERATION MANUAL THIS OPERATION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL COLOR PRINTER. Hereby, Mitsubishi Electric Corporation, declares that this digital color printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. OTHERS PRECAUTIONS FEATURES PREPARATION TROUBLE- SHOOTING CONTENTS WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. INFORMATION This Class A digital apparatus complies with Canadian ICES-003. CAUTION :TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION 7KHOLJKWQLQJÀDVKZLWKDUURZKHDGV\PEROZLWKLQDQHTXLODWHUDOWULDQJOHLVLQWHQGHG to alert the user to the presence of uninsulated “dangerous voltage” within the SURGXFW¶VHQFORVXUHWKDWPD\EHRIVXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHWKHULVNRI HOHFWULFVKRFN The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 7KH³&DXWLRQKRWVXUIDFH ́V\PEROLQGLFDWHVWKDWWKHPDUNHGLWHPPD\EHKRWDQG should not be touched. The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including equipment malfunction) due to static electricity may occur in certain conditions. The “OFF/ON” symbol indicates connection to or disconnection from the mains, at least for mains switches. The “Alternating current” symbol indicates that the equipment is suitable for alternating current only. WARNING: Use the included AC power cord so as not to interfere with radio and television reception. If you use other cables, it may cause interference with radio and television reception. OTHERS PRECAUTIONS FEATURES PREPARATION TROUBLE- SHOOTING CONTENTS CAUTION: &KDQJHVRUPRGL¿FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLG the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 2SHUDWLRQRIWKLVHTXLSPHQWLQDUHVLGHQWLDODUHDLVOLNHO\WRFDXVHKDUPIXOLQWHUIHUHQFHLQZKLFKFDVH the user will be required to correct the interference at his or her own expense. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. WARNING: In the USA or Canada, use the AC power cord according to the recommendations as below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03. Connect to the 120 V receptacle of the room or the host equipment. The AC power cord should be UL or CSA approved and consist of type SVT, size 16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type, 125 V 10 A or higher rating connector and NEMA 5-15 type, 125 V 10 A or higher rating plug. 8VHWKH$&SRZHUFRUGDVVSHFL¿HGDERYHVRDVQRWWRLQWHUIHUHZLWKUDGLRDQG television reception. If you use other cables, it may cause interference with radio and television reception. WARNING: In Europe, use the AC power cord according to the recommendations as below, in order to comply with EN60950-1. Connect to the 230 V receptacle of the room or the host equipment. The AC power cord should be VDE approved and consist of core size 0.75 mm 2 or bigger, length 2 m or shorter cord with IEC60320-1/C13 type, 250 V 10 A or higher rating connector and CEE(7)VII type, 250 V 10 A or higher rating plug. 8VHWKH$&SRZHUFRUGDVVSHFL¿HGDERYHVRDVQRWWRLQWHUIHUHZLWKUDGLRDQG television reception. If you use other cables, it may cause interference with radio and television reception. WARNING: 7KHVRFNHWRXWOHWVKDOOEHLQVWDOOHGQHDUWKHHTXLSPHQWDQGVKDOOEHHDVLO\DFFHVVLEOH 1RWH7KLVV\PEROPDUNLVIRU(8FRXQWULHVRQO\ 7KLVV\PEROPDUNLVDFFRUGLQJWRWKHGLUHFWLYH(&$UWLFOH,QIRUPDWLRQIRUXVHUVDQG$QQH[,9DQGRU to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste. If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%) In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators. Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre. Please, help us to conserve the environment we live in! 1 OTHERS PRECAUTIONS FEATURES PREPARATION TROUBLE- SHOOTING CONTENTS CONTENTS Contents .................................................................................................1 Safety precautions ..................................................................................2-4 8QSDFNLQJ.............................................................................…

Text truncated - open the document above for the full version.

Photo . LABEL Photo . Photo .

Label Location . LABEL

The description of Antenna 1.Location of ANTENNA RF module Antenna Connector Antenna Antenna Antenna Connector 2.Picture of Antenna Antenna Type: Loop Coil Antenna Fre quency Range : 13.56~13.86MHz Connector Type : Board to wire

Test report No. : 10097200H-A-R1 Page : 2 of 22 FCC ID : BGBCP-C60DW Issued date : December 5, 2013 Revised date :January 22, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 REVISION HISTORY Original Test Report No.: 10097200H-A Revision Test report No. Date Page revised Contents - (Original) 10097200H-A December 5, 2013 - - 1 10097200H-A-R1 January 22, 2014 P8 Addition of Comment. 2 10097200H-A-R1 January 22, 2014 P13, 14 Addition of test data of without Tag. Test report No. : 10097200H-A-R1 Page : 3 of 22 FCC ID : BGBCP-C60DW Issued date : December 5, 2013 Revised date :January 22, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ............................................................................................. 4 SECTION 2: Equipment under test (E.U.T.) ............................................................................... 4 SECTION 3: Test specification, procedures & results ................................................................ 5 SECTION 4: Operation of E.U.T. during testing ........................................................................ 8 SECTION 5: Conducted emission ............................................................................................... 10 SECTION 6: Radiated emission (Fundamental , Spurious Emission and Spectrum Mask ) 11 SECTION 7: Other test ................................................................................................................ 12 APPENDIX 1: Data of EMI test .................................................................................................. 13 Conducted emission ..................................................................................................................................................... 13 Fundamental emission and Spectrum Mask .............................................................................................................. 14 Spurious emission ........................................................................................................................................................ 15 Frequency Tolerance ................................................................................................................................................... 19 APPENDIX 2: Test instruments .................................................................................................. 20 APPENDIX 3: Photographs of test setup.................................................................................... 21 Conducted emission ..................................................................................................................................................... 21 Radiated emission ........................................................................................................................................................ 22 End of Report ............................................................................................................................................................... 22 Test report No. : 10097200H-A-R1 Page : 4 of 22 FCC ID : BGBCP-C60DW Issued date : December 5, 2013 Revised date :January 22, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : Mitsubishi Electric Corp Address : 1 Zusho, Baba, Nagaokakyo-city, Kyoto, 617-8550, Japan Telephone Number : +81-75-958-3249 Facsimile Number : +81-75-958-3709 Contact Person : Tatsuya Egawa SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Digital Color Printer Model No. : CP-C60DW-WE Serial No. : Refer to Clause 4.2 Rating : AC 100-240V 50/60Hz Receipt Date of Sample : November 9, 2013 Country of Mass-production : Malaysia Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description General Specification Clock frequency(ies) in the system : CPU: 66.6MHz (Outer), 200MHz (Inner) USB: 480MHz (Inner) FPGA: 60MHz Radio Specification Radio Type : Transceiver Frequency of Operation : 13.56MHz Modulation : ASK Bandwidth : 14kHz Power Supply (radio part input) : DC 5.0V Antenna Type : Loop coil Antenna Connector Type : Board to wire connector Method of Frequency Generation : Quartz Crystal Test report No. : 10097200H-A-R1 Page : 5 of 22 FCC ID : BGBCP-C60DW Issued date : December 5, 2013 Revised date :January 22, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2013, final revised on September 30, 2013 and effective October 30, 2013 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.225 : Operation within the band 13.110-14.010MHz 3.2 Procedures and results Item Test Procedure Specification Worst margin Results Remarks Conducted emission ANSI C63.4:2003 7. AC powerline conducted emission measurements Section 15.207 [QP] 10.1dB, 13.56020MHz, L [AV] 0.3dB, 13.56020MHz, L Complied - <IC>RSS-Gen 7.2.2 <IC>RSS-Gen 7.2.2 Electric Field Strength of Fundamental Emission ANSI C63.4:2003 13. Measurement of intentional radiators Section 15.225(a) 81.6dB 13.56000MHz, 0deg. Complied Radiated <IC> RSS-Gen 4.8, 4.11 <IC>RSS-210 A2.6 Spectrum Mask ANSI C63.4:2003 13. Measurement of intentional radiators Section 15.225(b)(c) 45.6dB 13.10000MHz 0deg. Complied Radiated <IC>RSS-Gen 4.9, 4.11 <IC> RSS-210 A2.6 20dB Bandwidth ANSI C63.4:2003…

Text truncated - open the document above for the full version.

Test report No. : 10097200H-A-R1 Page : 21 of 22 FCC ID : BGBCP-C60DW Issued date : December 5, 2013 Revised date :January 22, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Conducted emission Photo 1 Photo 2 Test report No. : 10097200H-A-R1 Page : 22 of 22 FCC ID : BGBCP-C60DW Issued date : December 5, 2013 Revised date :January 22, 2014 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Radiated emission Photo 1 Photo 2 End of Report