BJM-M1Quad Band Smart Phone W/ Bluetooth

1 TATUNG SMARTPHONE M1 USER MANUAL Smartphone User Manual 1 Congratulations on the purchase of your new Windows Mobile™ Smartphone! Please read before operating your device. THE SMARTPHONE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE PACKAGE. DO NOT REMOVE THE BATTERY WHEN THE SMARTPHONE IS BEING CHARGED. WHEN INSTALLING YOUR SIM CARD, MAKE SURE THE SMARTPHONE IS POWERED OFF AND THE SIM CARD IS INSERTED INTO THE SLOT SECURELY. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE OUTER CASING OF THE SMARTPHONE. Safety Instructions To ensure your safety, and prevent the Smartphone from potential damages, please follow the instructions carefully at all times. Avoid dropping, hitting, applying excessive pressure or putting heavy objects on the Smartphone. Avoid exposing the Smartphone to chemical, corrosive and alcoholic liquids or using materials to clean the Smartphone. Do not use, leave, expose, or store the Smartphone under fire or where it will be subjected to prolonged direct sunlight or extreme temperatures. Avoid exposing the Smartphone to water. If any water may drop on the panel, please use a dry cloth to wipe the Smartphone right away so not to harm the player and its system. Keep the Smartphone away from strong magnetic objects or environments. Do not try to modify, repair or take apart components of your Smartphone. If you need further service, please refer servicing to the authorized service technician or provider. Smartphone User Manual 2 ? Avoid pushing objects into product Never push any objects into the Mini-SD card slot or other openings in the product. ? Use only original manufacturer-approved accessories that don’t contain any metal, else FCC RF exposure guidelines will be violated. ? While using earphones, please pay attention to the volume. Being exposed to high volume can damage your hearing. This device can cause interference to an aircraft's navigation system and network. In most countries it is against the law to use this device on board an airplane. Do not use this product in gas stations, fuel stores, chemical plants and locations containing explosives. Vehicle drivers in motion are not permitted to use hand-held devices, except in emergency. In some countries, using hands-free devices as an alternative is allowed. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. In most hospitals or medical facilities, using this device is forbidden. Contents Chapter 1 Get Started 1.1 KnowYour Smartphone 1.2 Setup Your Smartphone 1.3 Status Indicators 1.4 Accessories 1.5 Enter Text and Numbers 1.6 Navigate 1.7 Secure Your Smartphone Chapter 2 Use Your Smartphone 2.1 Make a Phone Call 2.2 Receive a Phone Call 2.3 Use the Contacts and Beam 2.4 In-call Options 2.5 Retrieve a Voice Mail Message 2.6 Review Your Calls 2.7 Speed Dials 2.8 Additional Dialing Information Smartphone User Manual 3 Chapter 3 Use Your Camera 3.1 Use the Camera 3.2 Use Pictures & Videos Chapter 4 Personalize Your Smartphone 4.1 Customize Smartphone Settings 4.2 Customize Profiles and Sounds 4.3 Customize Date and Time Chapter 5 Get Connected 5.1 Connect to the Internet 5.2 Pocket Internet Explorer 5.3 Bluetooth 5.4 Modem Link 5.5 Wireless Manager Chapter 6 Messaging Features 6.1 Set up Accounts 6.2 Manage Accounts 6.3 Send E-mail and Text Messages 6.4 Receive E-mail and Text Messages 6.5 View Message Folders 6.6 Instant Messaging 6.7 MMS Messaging Chapter 7 Synchronization 7.1 Use ActiveSync 7.2 Install ActiveSync 7.3 Exchange Server 7.4 Synchronize music, video and pictures Chapter8 Applications 8.1 Use Calendar 8.2 Use Tasks 8.3 Use Calculator 8.4 Use Voice Notes 8.5 Use Windows Media Player 8.6 Use JAVA Manager 8.7 Games Smartphone User Manual 4 Appendix Regulatory Notices Troubleshooting Specifications INDEX Chapter 1 Get Started 1 Chapter 1 Get Started 1.1 Know Your Smartphone 1.2 Setup Your Smartphone 1.3 Status Indicators 1.4 Accessories 1.5 Enter Text and Numbers 1.6 Navigate 1.7 Secure Your Smartphone 1.1 Know Your Smartphone This section will help you familiarize yourself with your Smartphone, including a basic introduction to the buttons and features. 1. Power Button Press and hold the Power Button to switch on or off your Smartphone. Press and quickly release the Power Button to display the Quick List, which enables you to change profiles, lock your Smartphone, manage wireless status, or switch off your Smartphone. Chapter 1 Get Started 2 2. Mini-SD Card Slot Use the push-push technique. Simply push the Mini-SD card to click in or push again to eject. 3. Earphone Jack Plug the stereo headset into the Earphone Jack to use the headset frofile and listen to music or multimedia files. 4. Volume Up/Down Button This button allows you to adjust the volume at any time. 5. Camera Button Press this button once to switch on the preview mode. Press again for still pictures capturing or video recording. 6. Mini USB Port Plug the Mini USB cable into the port to synchronize data in your Smartphone with desktop or laptop. Also, plug the AC adapter in here to charge the battery. 7. Receiver 8. Microphone 9. Battery Charging Indicator Indicate the charging status. Battery Charging Indicator Status Solid Green Battery is fully charged. Solid Amber Battery is being charged. 10. Navigation Button Scroll left, right, up, and down or press down as enter. When executing Windows Media Player 10, scroll up or down for adjusting the volume; scroll left or right to select previous or the next song; to fast forward/rewind quickly, scroll and hold left or right, press down to pause, press again to play. 11. Media Player Button Switch on Windows Media Player 10. 12. Left Softkey Perform the function shown in the “Softkey Label” on the screen immediately above the button. (For example, when in the Home screen, pressing the Left Softkey opens the Start menu.) Chapter 1 Get Started 3 13. Right Softkey Perform the function shown in the “Softkey Label” on the screen immed…

Text truncated - open the document above for the full version.

Chris Harvey From: amanda.wu [[email protected]] on behalf of application [[email protected]] Sent: Thursday, February 09, 2006 7:22 AM To: [email protected] Subject: Re ¡G Re¡G RE: Re ¡G TATUNG CO., FCC ID: BJM-M1, Assessment NO.: AN06T5448, Notice#1 Page 1 of 3 2/12/2006 Dear Charvey: Please see my reply as below. Thank you. The correct FCC ID is: BJM-M1 Best Regards Amanda Dear Anthony Yao: I have reviewed the above referenced TCB application and have the following issues that need to be addressed before the review can be completed: 1. The application submitted contains the technical documentation for the composite operation of the GSM/GPRS handset (Equipment Class PCE) and Bluetooth (Equipment Class DSS). Since this composite device operates in 2 different Equipment Classes, 2 separate applications for Certification must be submitted, even though they can use the same FCC ID. Please submit another application using the CCS TCB web based system for the Bluetooth Portion of this device. This will require a separate Certification fee as well as uploading the documentation for the Bluetooth portion of this handset. Please notify me at charvey- [email protected] when this Bluetooth application has been filed. Ans: Well noted it & Thank you for your information. Bluetooth application has been filed of Feb, 6, 2006 and the ass. no. is AN06T5495. Please check it and if there is any comments , please kindly advise us. 2. For the Bluetooth portion, there are several FCC requirements that are not yet declared as being compliant in the application referenced above. These requirements are automatically deemed compliant if the device meets the Bluetooth Specification. The device is uses the Bluetooth name; however there is no statement that the headset complies with the Bluetooth Specification. Please either provide a declaration of compliance with the Bluetooth Specification (please include version) or provide individual "Chris Harvey" <[email protected]> 2006/02/01 12:34 AM ??? ? charvey ???: "'application'" <[email protected]>, <[email protected]> ????: <[email protected]>, "'Claire Hoque'" <[email protected]> ??: RE: Re ? TATUNG CO., FCC ID: BJMM1, Assessment NO.: AN06T5448, Notice#1 declarations of compliance with the following items needed for FCC 15.247 compliance: Ans: We had asked customer provide a declaration of compliance with the Bluetooth Specification. However it seems very difficults to them... So, they are applying to the BQB certificate now and it could meet the Bluetooth Specification. We estimate that we will receive the BQB certificate from customer on Feb. 7th and once get the certificate will offer you immediately. • Is the hopping sequence pseudorandom, based on the technical description? • Is each channel used equally on average, based on the technical description? • Does the associated system receiver have a compliant input bandwidth, based on the measured 20 dB emission bandwidth? • Does the associated system receiver have the ability to hop in synchronization with the transmitter, based on the technical description? • Does the design of the frequency hopping system allow it to comply with all pertinent requirements when presented with a lengthy data stream? • Does the frequency hopping system comply with the non-coordination requirement? 3. The Label is required to contain the term “FCC ID”, not just the FCC logo and below the term “ID”. Please correct the label to contain the term “FCC ID: BJM-M1” in a continuous string. Ans: The label format had been modified. Please have the attachment. 4. The RF Transmit Power (ERP/EIRP) data in the EUT Description summary on page 4 of the RF report is not the maximum listed in the data tables of pages 15 & 16. Please update this information in the test report. 5. The Occupied bandwidth measurements document the 26dB bandwidths to be approximately 240 kHz; however the emission type on page 4 of the test report is listed as 997KGXW, which would indicate a necessary bandwidth of 997 kHz. Please update the Q4&5 Ans:Sorry, it's typo. it had been revised on page 4. Please see the revised test report as attachment. 6. The SAR testing was performed using the Bluetooth transmitter turned on for the body-worn configuration, without any explanation as to why the Bluetooth was not also turned on for the held-to-head operating mode. If the Bluetooth is only used for headset connection then this would be a logical choice, but this is not explained. Please either provide an explanation as to why this was done or provide data for the worst case SAR positions/settings for the held-to-head mode with the Bluetooth transmitter turned on. Ans:We had confirmed the worst case with bluetooth at any conditions (included held-to-head and body-worm) (named : Bt+GSM or BT+GPRS) 7. The ConvF probe factors used in many of the SAR plots are different than the calibration factors provided (for example the 835MHz band use a value of 9.75 or 9.47; however the probe calibration lists a value of 7.94 for the ConvF at 835MHz Head). The date of calibration on the probe is listed as November 19, 2004, which is greater than 1 year from the date of testing. Please explain and correct as necessary. Ans:The calibration date of probe SN3552 is march ,2005. Please refer to the attached file. The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the Page 2 of 3 2/12/2006 filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. Best regards, Chris Harvey [email protected] Page 3 of 3 2/12/2006

Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 1 Total Page: 18 Rev. 00 EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 2 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 3 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 4 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 5 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 6 Rev.00

Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 7 Rev.00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 8 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 9 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 10 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 11 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 12 Rev.00

Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 13 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 14 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 15 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 16 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 17 Rev.00 Compliance Certification Services Inc. Report No: 51201002 Date of Issue: January 17, 2006 Page 18 Rev.00

yellow font - new part 紅色字體 -> 此版修改部分 (AZURE_A868 ) MAIN BOARD Bill of Material Revision: 01C Block Number : 5799066101 MODIFY: 2005/11/16 Bill Of Materials Page1 PCB Footprint No. TATUNG P/N Qty LOCATION Part Description SPECIFICATION AUTHORIZED VENDOR VENDOR PART NAME TEL Contact Person Size 單價 ML414R-TT40 1 NEW-E050104001 1 B401 ML414RU-TT40 LITHIUM BATTERY SANYO ML414R-TT40 3V 0.1mA SANYO ML414RU-TT40 0918-007676 patrick_chao USD 0.37 MPZ1608S221A 2 NEW 4 B402,B403,B404,B405 MPZ1608S221A BEAD MPZ1608S221A TDK MPZ1608S221A 02-2712-5090#197 陳子欽 1.6*0.8*0.8mm NT 0.7716 0402C 3 5230015391 35,34 C1, C201,C212,C213,C214, 100 nF CAPACITOR, MONOLITHIC SMD REEL X7R DC 16V 0.10UFK T 0402 C215,C216,C217,C218,C219,C224,C225,C229,C230,C231,C235,C236,C237,C238,C239,C306, C312,C315,C323,C416, C417,C435,C441 ,C447,C449, C450,C452,C462, C606,C608, C616,C620,C628,C631,C632,C653,C908, C913,C916,C434, 0402C 4 5240003791 12 C202,C607,C610,C614,C615, 100 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 100.00PFJ T 0402 C617,C629,C630,C633,C647,C909,C910 0402C 5 5240003191 5,3 C203,C204,C443, C436,C401 22 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 22.00PFJ T 0402 C404 0402C 6 5230023091 1 C205 33 nF CAPACITOR, MONOLITHIC SMD REEL X7R DC 16V 333 PFK T 0402 0402C 7 5240405091 1 C206 5 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 5.00PFC T 0402 0402C 8 5240004491 8,8 C207, C446,C600,C644,C646, 12 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 12.00PFJ T 0402 C651,C658,C662,C663,C667 0402C 9 5230010591 8,9 C208,C314,C410,C411,C419, 1 nF CAPACITOR, MONOLITHIC SMD REEL X7R 50V 1000.00PFK T 0402 C444,C456,C457 ,C459,C460, C463,C464,C468, C650 0603C 10 NEW-E230028091 5,6 C209,C221,C223,C654 ,C902, 4.7 uF CAPACITOR,MONOLITHIC SMD REEL X5R DC 6.3V 4.70 UFK T 0603 MURATA GRM188R60J475KE19D 02-25378363 陳彥穎 C912 0402C 11 5230022991 1 C210 47 nF CAPACITOR, MONOLITHIC SMD REEL X7R DC 16V 473 PFK T 0402 0402C 12 5230014791 1 C211 4.7 nF CAPACITOR, MONOLITHIC SMD REEL X7R DC 25V 4700.00PFK T 0402 0805C 13 5230020591 1,3 C222,C232,C303,C309,C313, 10 uF, 10%, 6.3V, X7R CAPACITOR.MONOLITHIC SMD REEL X7R DC 6.3V 10.00UFK T 0805 EPCOS B37941-K7106-K62 C330,C333,C342,C344,C420, C422,C445, C656 0402C 14 NEW-E230030391 15,15 C226,C227,C233,C234,C301, 1 uF CAPACITOR,MONOLITHIC SMD REEL X5R DC 6.3V 1.00UFK T 0402 MURATA GRM155R60J105K 02-25378363 陳彥穎 0.24 C304,C307,C310,C311,C329, C340,C347,C402,C403 ,C405, C406, C407,C409 ,C414,C418, C434 ,C437 ,C438 ,C439,C442, C455,C467,C501 ,C613,C619, C622,C915,C441,C405,C418 0402C 15 5240410091 4,5 C240,C609,C624,C625,C901, 10 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 10.00PFD T 0402 0402C 16 5230447191 2 C295,C296 470 pF CAPACITOR, MONOLITHIC SMD REEL X7R 50V 470PFK 0402 0402C 17 5240447991 2,1 C305,C436, C434 4.7 pF CAPACITOR, MONOLITHIC SMD REEL NPO 50V 4.7PFC 0402 0402C 18 5240002891 2 C328,C334 33 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 33.00PFJ T 0402 0402C 19 5230418191 2 C331,C332 180 pF CAPACITOR, MONOLITHIC SMD REEL X7R 50V 180.00PFK 0402 0402C 20 5230017291 1,3 C343,C448,C453 10 nF CAPACITOR, MONOLITHIC SMD REEL X7R DC 16V 0.01UFK T 0402 0402C 21 NEW-E240456091 21,20 C401,C404, C408,C412,C413, 56 pF CAPACITOR,MONOLITHIC SMD REEL NPO DC 50V 56PFJ T 0402 Taiyoyuden 蜜望實 UMK105CH560JW 0918-923-787 聶永銘 C415,C461,C469,C423,C424,C425,C426,C427,C428,C430, C431,C432,C433,C437,C447,C448,C450,C454,C458,C470,C471,C472,C473,C455,C463 0402C 22 5230023691 1,2 C421, C634 470 nF CAPACITOR, MONOLITHIC SMD REEL Y5V DC 6.3V 0.47 UFZ T 0402 0805C 23 NEW- E230032691 14,13 C222,C232,C303,C309,C313, 22 uF CAPACITOR,MONOLITHIC SMD REEL X7R DC 16V 22.00UFK 0805 Taiyoyuden蜜望實 JMK212BJ226MG-T E230027991 C330,C333,C342,C344,C347, CAPACITOR,MONOLITHIC SMD REEL X5R DC 6.3V 22.00UFM T 0805 C442,C445,C465,C466 ,C654 C449 0402C 24 5240003091 5,4 C603,C645,C652,C655 ,C657, 47 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 47.00PFJ T 0402 C661 0402C 25 5240004791 1 C637 0.5 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 0.50PFC T 0402 0402C 26 5230468191 1 C648 680 pF CAPACITOR, MONOLITHIC SMD REEL X7R 50V 680PFK 0402 0402C 27 5230014891 1 C649 2.2 nF CAPACITOR, MONOLITHIC SMD REEL X7R DC 50V 2200.00PFK T 0402 0402C 28 5240004591 1,2 C659, C908 1 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 1.00PFC T 0402 0402C 29 NEW-E240412991 1 C660 1.2 pF CAPACITOR,MONOLITHIC SMD REEL NPO DC 50V 1.2PFC 0402 MURATA GRM1555C1H1R2CZ01D 02-25378363 陳彥穎 0402C 30 5240407091 1 C665 7 pF CAPACITOR, MONOLITHIC SMD REEL NPO DC 50V 7.00PFD T 0402 0402C 31 NEW 1 C666 2.2 pF GRM1555C1H2R2CZ01D MURATA GRM1555C1H2R2CZ01D 02-25378363 陳彥穎 0402C 32 NEW-E230032791 1 C918 0.68 uF CAPACITOR,MONOLITHIC SMD REEL X5R DC 6.3V 0.68UFK 0402 MURATA GRM155R60J684KE19D 02-25378363 陳彥穎 HVC375B 33 NEW-F614001051 1 D201 HVC375B DIODE,VERICAP RENESAS HVC375B UFP 光菱 HVC375B-UFP 02-2698-1143#116 李佳龍 USD 0.05 RB521S30T1 34 NEW-F611004851 2,3 D301,D405,D406 RB521S30T1 DIODE,SCHOTTKY BARRIER ON RB521S30T1GSOD-523 30V/200mA TI_世平 RB521S30T1 0952-521276 楊善硯 NTD 1.2 UDZSTE-176.2B 35 NEW-F615040032 1 D402 UDZSTE-176.2B DIODE,ZENER ROHM UDZS6.2B 6.06~6.33V SOD-323 ROHM_增你強 UDZTE-176.20B 02-2792-8788#731 章家旭 USD 0.018 0603P-R01 36 NEW-F618031015 1 D403 0603P-R01 DIODE LED SMD AOT AOT-0603P-R01-HS/RED AOT AOT-0603P-R01-HS 1.6*0.8*0.6mm NT 0.6 0603-B110 37 NEW-F618031016 1 D404 0603-B110 DIODE LED SMD AOT AOT-0603-B110-HS/BLUE AOT AOT-0603-B110-HS 1.6*0.8*0.4mm NT 1.1 0603P-G01 38 NEW-F618031017 1 D408, D409 0603P-G01 DIODE LED SMD AOT AOT-0603P-G01-HS/GREEN AOT AOT-0603P-G01-HS 1.6*0.8*0.4mm NT 2.5 0603P-A01 39 NEW-F618031018 1 D409, D408 0603P-A01 DIODE LED SMD AOT AOT-0603P-A01-HS/AMBER AOT AOT-0603P-A01-HS 1.6*0.8*0.5mm NT 0.6 RFANT3216090A0T 40 NEW-F643001350 1 E901 RFANT3216090A0T 2.4G ISM BAND CHIP ANTENNA WAL EFANT3216090A0T 華新科 ANT3216090A0T 0910-123-380 劉得傑 3.2x1.6x0.9 mm NTD 5.0 D1016 41 NEW-F643001550 1 FE600 D1016 SAW MODULES EPCOS B30144-D1016-0619 台灣瑞普 D1016 5.5x8.2x1.7 mm DBF71C901 42 NEW-E061133014 1 FL901 DBF71C901 BALANCE FILTER FOR BLUETOOTH DBF71C901-T SOS…

Text truncated - open the document above for the full version.

Walsin Technology Corporation Page 1 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 MULTILAYER CERAMIC ANTENNA RFANT Series 2.4 GHz ISM Band Working Frequency P/N: RFANT3216090A0T *Contents in this sheet are subject to change without prior notice. Walsin Technology Corporation Page 2 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 REVISION HISTORY Rev P/N Description Date V01 RFANT3216090A0T First Version 2004-12-10 Walsin Technology Corporation Page 3 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 FEATURES … Surface Mounted Devices with a small dimension of 3.2 x 1.6 x 0.9 mm 3 meet future miniaturization trend. … Embedded and LTCC (Low Temperature Co-fired Ceramic) technology is able to future integrate with system design as well as beautifying the housing of final product. … High Stability in Temperature / Humidity Change APPLICATIONS … Bluetooth … Wireless LAN … ISM band 2.4GHz wireless applications DESCRIPTION Walsin Technology Corporation develops a new ceramic embedded antenna specified for 2.4 GHz ISM Band application, as shown in below “CONSTRUCTION”. Both of Wireless LAN IEEE 802.11b/g and Bluetooth TM typically located on this unlicensed frequency band which range covers from 2.4GHz to 2.4835GHz. To fulfil the friendly usage for antenna, this antenna has been designed to a typical 350MHz bandwidth through Walsin’s advanced LTCC (Low Temperature Co-fired Ceramic) technology and superior product design via 3D EM Simulation Skill. This antenna has a rectangular ceramic body with a tiny dimension of 3.2x 1.6 x 0.9 mm 3 meet the future SMT automation and miniaturization requirements on modern portable devices. CONSTRUCTION Fig 1. Outline of 2.4GHz Antenna – RFANT3216090A0T DIMENSIONS Figure Dimension Port definition L 3.20 ± 0.15 mm - W 1.60 ± 0.15 mm - T 0.90 ± 0.10 mm - F 0.50 ± 0.10 mm Feed termination G 0.50 ± 0.10 mm Ground termination P1 0.50 ± 0.10 mm Solder termination C 0.60 ± 0.15 mm - Walsin Technology Corporation Page 4 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 ELECTRICAL CHARACTERISTICS Item Specification Working Frequency Range 2.4 GHz ～ 2.5GHz Gain 2 dBi (Typical) VSWR 2 max. Polarization Linear Azimuth Beamwidth Omni-directional Impedance 50Ω Rated Power (max.) 500 mW Operation Temperature -40C ~ +85C Remark: The specification is defined based on the test board dimension as in below Antenna on Test Board 55.8mm 60 mm 20 mm 11.6mm SMA connector : Empty Area : 50 ohm Feedin g : Ground SMA connector : : Walsin Technology Corporation Page 5 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 Antenna S11 on Test Board ------------------------------------------------------------------------------------------------------------------------------ -10dB bandwidth 370MHz Walsin Technology Corporation Page 6 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 SOLDER LAND PATTERN DESIGN Figure Symbol Dimension L 4.20 ± 0.10 mm Lp 0.60 ± 0.10 mm Wp 0.70 ± 0.10 mm Lf 0.80 ± 0.10 mm Lg 1.00 ± 0.10 mm Wg 0.70 ± 0.10 mm Lh 0.20 ± 0.10 mm Wd 0.60 ± 0.10 mm RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT3216090A0T antenna was measured based on the test board size and the antenna installation position as shown in the below: SMA : Empty Area :50 ohm Feeding :Ground SMA X Y Z To RF 50 Ω Transmission Line To RF I/O GROUND L Lp Ground Soldering Pad Wp Pad connected to Ground Pad connected to 50 Ω Transmission Line Lg Wg Lh Lf Walsin Technology Corporation Page 7 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 Vertical Horizontal Y - Z Plane Average Gain= 0.318 dBi Peak Gain = 3.81dBi Average Gain = -0.35 dBi Peak Gain= -3.78dBi Average Gain=-8.14 dBi X - Z Plane Average Gain=- 2.224 dBi Peak Gain= -5.12 dBi Average Gain= -10.24dBi Peak Gain= 1.96 dBi Average Gain= -2.97 dBi X - Y Plane Average Gain= - 2.173 dBi Peak Gain= -2.16 dBi Average Gain= -9.20dBi Peak Gain= 2.58 dBi Average Gain= -3.84 dBi z Y z Y z X z X X Y X Y Walsin Technology Corporation Page 8 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 RFANT3216090A0T APPLICATION INFORMATION – For USB Dongle with PCB Dimension 20 x 60 mm 2 (1). Layout-A, Anrenna Area (Empty Space): 4.2 x 20mm 2 S11 for RFANT3216090A0T at Layout-A: S11 for Antenna - 2 ---------------------------------------------------------------------------------------------------------------------------------------- -10dB bandwidth 350MHz Walsin Technology Corporation Page 9 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 Radiation Pattern at 2.45GHz: E Plane H Plane Peak Gain = +2.94 dBi @ 158° Average Gain = -2.74 dBi Peak Gain= +2.57 dBi @ 80° Average Gain= -0.64dBi (2). Layout-B, Antenna Area (Empty Space): 2.95 x 20mm 2 Walsin Technology Corporation Page 10 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 S11 for RFANT3216090A0T at Layout-B : Radiation Pattern at 2.45GHz: E Plane H Plane Peak Gain = +3.1 dBi @ 154° Average Gain = -2.83 dBi Peak Gain = +2.27 dBi @ 98° Average Gain = -0.88 dBi -------------------------------------------------------------------------------------------------------------------------------------- -10dB bandwidth 190MHz Walsin Technology Corporation Page 11 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 (3). Layout-C, Antenna Area (Empty Space): 1.9 x 20mm 2 S11 for RFANT3216090A0T at Layout-C : ---------------------------------------------------------------------------------------------------------------------------------- -10dB bandwidth 125MHz Walsin Technology Corporation Page 12 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 Radiation Pattern at 2.45GHz: E Plane H Plane Peak Gain = +1.60 dBi @ 158° Average Gain = -2.74 dBi Peak Gain= +0.70 dBi @ 82° Average Gain= -2.30dBi Walsin Technology Corporation Page 13 of 15 ASC_RFANT3216090A0T_01 Nov. 2004 RELIABILITY TEST „ Mechanical performance Test item Test condition / Test method Specification Solderability Solder temp. : 235 ± 5°C Immersion time: 2 ± 1 sec Solder: SN63 95% min. coverage of all metabolised area Resistance to soldering heat Solder: Sn63 Preheating temperature: 150 ± 10°C Solder Temperature: 260 ± 5°C Immersio…

Text truncated - open the document above for the full version.

(B1) Wire Antenna (B2) Wire Antenna (B1) Wire Antenna H-PlaneFreq. (MHz) MaxAvg 824-1.46-3.30 8942.10-1.88 8801.37-0.56 9601.31-0.21 1710-1.58-4.57 18800.67-4.23 18501.34-3.75 1990-1.93-7.05 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = -1.46 dBi Avg = -3.30 dBi 824MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = 2.10 dBi Avg = 0.21 dBi 894MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = 1.37 dBi Avg = -0.56 dBi 880MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = 1.31 dBi Avg = -0.21 dBi 960MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = -1.58 dBi Avg = -4.57 dBi 1710MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = -1.58 dBi Avg = -4.57 dBi 1710MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = 1.34 dBi Avg = -3.75 dBi 1850MHz H-Plane -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 55 90 180 270 Max = -1.93 dBi Avg = -7.05 dBi 1990MHz H-Plane (B2) Wire Antenna H-PlaneFreq. (MHz) MaxAvg 824-1.76-3.12 8940.34-0.97 8800.39-1.02 9601.03-0.41 1710-2.42-5.69 1880-0.48-5.28 18500.19-4.34 1990-2.43-7.35

Compliance Certification Services Inc. Report No: 51201002-SF FCC ID:BJM-M1 Date of Issue: December 12, 2005 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 31 Rev. 00 ANSI/IEEE Std. C95.1-1992 In accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C FCC SAR TEST REPORT For Smart Phone (Quad band) Model: M1 Trade Name: TATUNG Issued to TATUNG CO. 22 Chungshan N. Rd., 3rd Sec. Taipei, Taiwan, 104, R.O.C. Issued by Compliance Certification Services Inc. No. 11, Wu-Kung 6 Rd, Wu-Ku Hsiang, Wu-Ku Industrial District, Taipei Hsien, (248) Taiwan. TEL: 886-2-2299-9720 FAX: 886-2-2299-9721 Compliance Certification Services Inc. Report No: 51201002-SF Date of Issue: December 12, 2005 Page 2 Rev. 00 TABLE OF CONTENTS 1. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) .......................................... 3 2. EUT DESCRIPTION ............................................................................................................ 4 3. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC........... 5 4. DOSIMETRIC ASSESSMENT SETUP ............................................................................. 5 4.1 MEASUREMENT SYSTEM DIAGRAM.....................................................................................6 4.2 SYSTEM COMPONENTS............................................................................................................7 5. EVALUATION PROCEDURES ......................................................................................... 9 6. MEASUREMENT UNCERTAINTY ................................................................................ 13 7. EXPOSURE LIMIT ............................................................................................................ 14 8. EUT ARRANGEMENT ..................................................................................................... 15 8.1 ANTHROPOMORPHIC HEAD PHANTOM .............................................................................15 8.2 DEFINITION OF THE “CHEEK/TOUCH” POSITION ............................................................16 8.3 DEFINITION OF THE “TILTED” POSITION...........................................................................17 9. MEASUREMENT RESULTS............................................................................................ 18 9.1 SYSTEM PERFORMANCE CHECK .........................................................................................18 9.2 TEST LIQUIDS CONFIRMATION............................................................................................20 9.3 EUT TUNE-UP PROCEDURES ...............................................…

Text truncated - open the document above for the full version.