BJM-TTABB12DATablet PC

Tatung Company

Click to zoom

Application Details

Equipment Class: NII - Unlicensed National Information Infrastructure TX
Date of Grant: Dec 23, 2003
Application Purpose: Original Equipment
Date of Application: Oct 15, 2003
Equipment Note: Tablet PC
Frequency Range: 5150.00000000 - 5350.00000000
Company: Tatung Company
Country: Taiwan

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

TABLET PC USER’S MANUAL ACCESSORY CHECKLIST Standard Accessories (depends on model and configuration) Power Cord AC Adapter Cleaning Cloth Stylus (includes an eraser function) Stylus Tether Slipcover Recovery CD Microsoft Windows XP Tablet PC Edition Introductory Guide SAFETY GUIDELINES Safety Information Please pay attention to the following two symbols that appear in the User Manual. Each symbol is followed by important, useful information that will help you use your Tablet PC. Warning! This symbol warns of incorrect usage of equipment and/or a violation of the instructions for usage that will damage the Tablet PC or impair its performance. Attention! This symbol marks advice that will help you get better results when using your Tablet PC. Safety and Regulatory Information z When moving the Tablet PC, be careful not to drop it. z Do not dismantle the outer casing, especially during system start-up. Any type of dismantling will damage the system, and the manufacturer will not be held responsible. z Using an incorrect memory module may damage the system. z Do not install any expansion card that draws large amounts of electric current and will overload the system. z If the battery is replaced incorrectly, there is the risk of an explosion. When replacing the battery, the user should use the same kind as the original. Dispose of the used battery according to the manufacturer’s instructions. In order to get optimal results from your Tablet PC, please follow the recommendations below. The user should remember: z When viewing the computer screen, please maintain a distance of 38cm–45cm for the best results. z Avoid exposing the computer screen to direct sunlight, which can cause viewing discomfort and/or reduce the screen brightness. Power Cord and Power Supply Safety Guidelines z Use together with the designated AC adapter. z Keep away from cold. z Keep away from high temperatures or fire hazards. z Do not short-circuit the power-out. z Do not set in water. z Do not use in humid areas. z Do not pull on the power cord. z Use together with the designated power cord. z Operate at a room temperature of 5 o C–40 o C (41 o F–104 o F), relative humidity 10%–95% z High voltage inside; do not open. z Do not try to alter or repair. z Do exert pressure on or drop. z Store at a room temperature of -20 o C–85 o C (-4 o F–185 o F), relative humidity 5%–95%. z Do not damage the cord insulation. z Set the computer up near an AC outlet. The AC power cord is the main AC power breaker for the Tablet PC, and you must be able to access it easily. For safety reasons, the power cord supplied with the system has a grounded plug. You also need to plug the power cord into a grounded wall outlet to avoid the danger of electric shock. z This system can handle a power system of 100–240V. It is suitable for use in the place or country of purchase. z In order to reduce the possibility of electric shock from the telephone network, plug the computer power cord into the AC outlet before connecting the computer with the telephone line. Also, you should disconnect the telephone line first when unplugging the computer power cord from the AC power outlet. z Do not repair the power supply yourself. To avoid damage to the power supply, contact a professional to have it repaired or replaced. z All performance procedures, adjustments, controls, etc. aside from those that are listed in the User Manual (as computer upgrading and maintenance) can cause serious radiation damage. In order to avoid laser exposure, please do not open the LCD cover. Battery Safety Guidelines z The battery is restricted to usage with this computer. z Do not dismantle the battery. z Do not expose the battery to fire or water. z Avoid fire, heat and any sort of damage to the battery. Do not touch either end of the battery with anything metallic. z Be extremely careful when using a damaged or leaking battery. z If the surrounding temperature exceeds 45 o C (113 o F), do not charge the battery. z If electrolytes come into contact with the battery, use soap and water to clean the affected area. z If electrolytes come into contact with your eyes, wash your eyes with water for 15 minutes, and then go to a physician immediately. z To buy a battery, contact a local distributor. z Do not store the battery in a warehouse under high temperatures (over 60 o C, 140 o F). z When you want to dispose of the battery, consult your local Waste Treatment Center regarding disposal and recycling restrictions. Mercury Battery Warning z This computer contains a mercury battery that is used to power the clock and the calendar loop. z If the battery is improperly replaced, there is the risk of an explosion. Please only use an identical or equivalent battery supplied by the manufacturer when replacing the battery. Please dispose of the used battery in accordance with the manufacturer’s instructions and local laws. Operating Specifications Electrical Rating: DC 12V, 3.5A Operating Temperature: 25 o C (77 o F) Storage Temperature: -20 o C–70 o C (-4 o F–158 o F) Operating Humidity: under 26 o C (78.8 o F), 15%–80% humidity Storage Humidity: under 65 o C (149 o F), 90% humidity (no condensation) Storage Altitude: 0m–4572m TABLET PC INTRODUCTION Properties z The Tablet PC’s size is designed with the user in mind: while writing, you can conveniently rest your hand on top of the screen. z The Tablet PC’s advanced speech recognition system also allows it to be used as a dictation machine. (See Note 1.) z The wireless network function lets you conduct business no matter where you are, increasing your efficiency. z Inputting information into the computer is no longer any trouble! Using the stylus, you can write directly on the screen and handwritten documents can even be converted to typed text. (See Note 2.) Components z Processor: Intel Pentium M Processor z Memory: 256MB (Upgradeable to 1GB) z Hard Drive: 30G z Display: 12.1” TFT technology, 1024x768 resolution z External Monitor Port: 1600x…

Text truncated - open the document above for the full version.

External Photos

Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 1 APPENDIX 2 EXTERNAL PHOTOGRPHS Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 2 Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 3 Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 4

ID Label/Location Info

Scale: 2:1 35.5mm 99.5mm R1X4 Tatung Tablet PC Assembled by TATUNG CO. 400,Chenteh.Rd.,7th Sec.,Peitou.Taipei Taiwan,122,R.O.C. Operate this device only with AC adapter provided with this product Made in Taiwan Model No.: TTAB-B12D Input: 12V 2.5A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with RSS-210 / CNR-210,CLASS B. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Canada ICES-003 CLASS B/NMB-003 CLASS B. IC:4484A-TTABB12DA FCC ID: BJM-TTABB12DA TTAB-B12D

ID Label/Location Info

LABEL AREA

Internal Photos

Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page1 APPENDIX 3 INTERNAL PHOTOGRPHS OF EUT Internal of EUT --- 1 Internal of EUT --- 2 Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 2 Internal of EUT --- 3 Internal of EUT --- 4 Antenna Position Antenna Position Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 3 Internal of EUT --- 5 Internal of EUT --- 6 Antenna Position Antenna Position Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 4 Internal of EUT --- 7 Internal of EUT --- 8 Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 5 Module --- 1 Module --- 2 Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 6 Module --- 3 Module --- 4 Compliance Certification Services Inc. Report No: B30814207-RP FCC ID: BJM-TTABB12DA Date of Issue: September 15, 2003 Page 7 Module --- 5

Operational Description

OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 1/1 Regulatory Antenna Information Example PIFA Antenna Spec. (English Required) Tatung Corporation OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 2/2 Antenna Information Example I. Antenna Assembly Specifications Antenna assembly overview: Peak Gain including cable loss. Designator Manufacture Antenna type Cable Assembly Info. Peak Gain W/ Cable loss (dBi) 2400-2500MHz 0.078 dBi (peak) Main antenna ANTENNIQUE CORPORATION PIFA (P/NUL1745-SB) 50ohm Coaxial. length: 27.2 cm diameter: 1.13 mm Connector: UL 5150-5350MHz 1.68 dBi (peak) 2400-2500MHz 1.069 dBi (peak) Auxiliary antenna ANTENNIQUE CORPORATION PIFA (P/NUL1745-SB) 50ohm Coaxial. length: 20 cm diameter: 1.13 mm Connector: UL 5150-5350MHz 1.643 dBi (peak) Antenna overview: Peak Gain not including cable loss. Antenna Designator Manufacture Antenna type Peak Gain w/o Cable Loss (dBi) 2400-2500MHz 1.003dBi (peak) Main antenna ANTENNIQUE CORPORATION PIFA 5150-5350MHz 3.312dBi (peak) 2400-2500MHz 1.881dBi (peak) Auxiliary antenna ANTENNIQUE CORPORATION PIFA 5150-5350MHz 3.186dBi (peak) OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 3/3 Cable assembly overview: Cable loss (including connector). Designator Manufacture Cable type and length VSWR Cable Loss (dBi) 2400-2500MHz 1.475 max 2400-2500MHz -0.925dBi (peak) For use with the Main antenna S.A.S CABLE &INTERCONNECT Example: (P/NUL1745-SB) 50ohm Coaxial. length: 27.2 cm diameter: 1.13 mm Connector: UL 5150-5350MHz 1.517 max 5150-5350MHz -1.632dBi (peak) 2400-2500MHz 1.3044 max 2400-2500MHz -0.812dBi (peak) For use with the Auxiliary antenna S.A.S CABLE &INTERCONNECT Example: (P/NUL1745-SB) 50 ohm Coaxial. length: 20 cm diameter: 1.13 mm Connector: UL 5150-5350MHz 1.6744 max 5150-5350MHz -1.542dBi (peak) OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 4/4 Please insert mechanical drawings of antenna here. Main antenna drawing Aux antenna drawing OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 5/5 Radiation characteristic of antennae Loaded (In Host System) 2400-2500MHz radiation characteristic Main antenna: 2400 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 2400 MHz Horizontal (dBi) peak -3.844 Vertical (dBi) peak -6.015 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 6/6 Main antenna: 2450 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 245 MHz Horizontal (dBi) peak -1.628 Vertical (dBi) peak -7.075 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 7/7 Main antenna: 2500 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 2500MHz Horizontal (dBi) peak 0.078 Vertical (dBi) peak -6.503 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 8/8 Auxiliary antenna: 2400 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 2400 MHz Horizontal (dBi) peak -0.001 Vertical (dBi) peak -2.943 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 9/9 Auxiliary antenna: 2450 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 2450 MHz Horizontal (dBi) peak -0.303 Vertical (dBi) peak -2.926 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 10/10 Auxiliary antenna: 2500 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 2500 MHz Horizontal (dBi) peak -1.069 Vertical (dBi) peak -1.943 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 11/11 5150-5135 MHz radiation characteristic Main antenna: 5150 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 5150 Horizontal (dBi) peak 1.567 Vertical (dBi) peak -5.187 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 12/12 Main antenna: 5250 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 5250 Horizontal (dBi) peak 0.957 Vertical (dBi) peak -2.542 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 13/13 Main antenna: 5350 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 5350 Horizontal (dBi) peak 1.68 Vertical (dBi) peak -4.245 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 14/14 Auxiliary antenna: 5150 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 5150 Horizontal (dBi) peak 1.643 Vertical (dBi) peak -5.187 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 15/15 Auxiliary antenna: 5250 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 5250 Horizontal (dBi) peak 1.585 Vertical (dBi) peak -8.636 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 16/16 Auxiliary antenna: 5350 MHz BLUE__E-PLANE RED__H-PLANE Center Frequency 5350 Horizontal (dBi) peak 1.492 Vertical (dBi) peak -6.878 OEM Name or other identification Document Number: XXXX Rev: XX Tatung Regulatory Antenna Information Example Rev. 1 17/17 Host PC Information Host model: TTB12-D Main Antenna Auxiliary antenna Auxiliary antenna Main antenna

RF Exposure Info

in accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C for Wireless LAN Module Built in Tablet PC (TTAB-B12D) Model: TTAB-B12D FCC ID: BJM-TTABB12DA October 24, 2003 REPORT NO: 03T2272-1 Prepared for Tatung Co. 22 Chungshan North Rd, Section 3 Taipei, Taiwan, R.O.C Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 REPORT NO: 03T2272-1 DATE: October 24, 2003 FCC ID: BJM-TTABB12DA COMPLIANCE CERTIFICATION SERVICES Page: 2 of 30 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) Dates of Tests: October 24, 2003 APPLICANT: Tatung Co. 22 Chungshan North Rd, Section 3 Taipei, Taiwan, R.O.C BRAND/MODEL NAME: Tatung/TTAB-B12D; RM/SC2000, SC2010 FCC ID: BJM-TTABB12D DEVICE CATEGORY: PORTABLE DEVICES EXPOSURE CATEGORY: GENERAL POPULATION/UNCONTROLLED EXPOSURE Test Sample is a: Production unit Modulation type: 802.11a Orthogonal Frequency Division Multiplexing (OFDM) Tx Frequency: 5180 MHz to 5320 MHz (UNII-1 & UNII-2) Max. O/P Power: (Conducted/Peak) 14.38 dBm Max. SAR (1g): 0.482 mW/g Application Type: Certification FCC Rule Part(s): 15E Note: This Report is only applicable for 802.11a This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C (released on 6/29/2001 see Test Report). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Steve Cheng EMC Engineering Manager REPORT NO: 03T2272-1 DATE: October 24, 2003 FCC ID: BJM-TTABB12DA COMPLIANCE CERTIFICATION SERVICES Page: 3 of 30 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS 1. EQUIPMENT UNDER TEST (EUT) DESCRIPTION.......................................................4 2. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC.........................5 3. DOSIMETRIC ASSESSMENT SYSTEM.......................................................................5 3.1. MEASUREMENT SYSTEM DIAGRAM.....................................................................................................6 3.2. SYSTEM COMPONENTS......................................................................................................................7 DASY4 MEASUREMENT SERVER..........................................................................................7 DATA ACQUISITION ELECTRONICS (DAE)...............................................................................7 SAM PHANTOM (V4.0).........................................................................................................8 DEVICE HOLDER FOR SAM TWIN PHANTOM...........................................................................8 SYSTEM VALIDATION KITS.....................................................................................................8 4. EVALUATION PROCEDURES...................................................................................9 5. MEASUREMENT UNCERTAINTY.............................................................................12 6. EXPOSURE LIMIT.................................................................................................13 7. MEASUREMENT RESULTS....................................................................................14 7.1. SYSTEM PERFORMANCE CHECK.......................................................................................................14 7.2. TEST LIQUID CONFIRMATION.............................................................................................................15 7.3. EUT TUNE-UP PROCEDURES...........................................................................................................16 7.4. SAR MEASUREMENTS RESULTS.......................................................................................................17 8. EUT PHOTOS.....................................................................................................21 9. EQUIPMENT LIST & CALIBRATION STATUS............................................................25 10. REFERENCES.....................................................................................................26 11. ATTACHMENTS...................................................................................................27 REPORT NO: 03T2272-1 DATE: October 24, 2003 FCC ID: BJM-TTABB12DA COMPLIANCE CERTIFICATION SERVICES Page: 4 of 30 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. EQUIPMENT UNDER TEST (EUT) DESCRIPTION APPLICANT: Tatung Co. 22 Chungshan North Rd, Section 3 Taipei, Taiwan, R.O.C BRAND/MODEL NAME: Tatung/TTAB-B12D; RM/SC2000, SC2010 FCC ID: BJM-TTABB12D DEVICE CATEGORY: PORTABLE DEVICES EXPOSURE CATEGORY: GENERAL POPULATION/UNCONTROLLED EXPOSURE Test Sample is a: Production unit Modulation type: 802.11a Orthogonal Frequency Division Multiplexing (OFDM) Tx Frequency: 5180 MHz to 5320 MHz (UNII-1 & UNII-2) Max. O/P Power: (Conducted/Peak) 14.38 dBm Max. SAR (1g): 0.482 mW/…

Text truncated - open the document above for the full version.

RF Exposure Info

Date/Time: 10/24/03 13:45:18 Test Laboratory: Compliance Certification Services C1-Ant 1 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A Program Name: EUT Setup Congiguration 1_Antenna 1 Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: 802.11a; Frequency: 5180 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.4502 mho/m, ε r = 47.5599, ρ = 1000 kg/m 3 ) Phantom section: Flat Section DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 3.1mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 Low/Area Scan (9x10x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 9.94 V/m Power Drift = -0.1 dB Maximum value of SAR = 0.475 mW/g Low/Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Peak SAR (extrapolated) = 1.16 W/kg SAR(1 g) = 0.378 mW/g; SAR(10 g) = 0.147 mW/g Reference Value = 9.94 V/m Power Drift = -0.1 dB Maximum value of SAR = 0.519 mW/g Date/Time: 10/24/03 12:01:52 Test Laboratory: Compliance Certification Services C1-Ant 1 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A Program Name: EUT Setup Congiguration 1_Antenna 1 Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: 802.11a; Frequency: 5240 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.4502 mho/m, ε r = 47.5599, ρ = 1000 kg/m 3 ) Phantom section: Flat Section DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 3.1mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 Middle/Area Scan (8x10x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 10.1 V/m Power Drift = -0.15 dB Maximum value of SAR = 0.676 mW/g Middle/Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Peak SAR (extrapolated) = 1.45 W/kg SAR(1 g) = 0.482 mW/g; SAR(10 g) = 0.189 mW/g Reference Value = 10.1 V/m Power Drift = -0.15 dB Maximum value of SAR = 0.646 mW/g Date/Time: 10/24/03 12:01:52 Test Laboratory: Compliance Certification Services C1-Ant 1 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 0mm (Fix Surface) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 Middle/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 10.1 V/m Power Drift = -0.15 dB Maximum value of SAR = 0.291 mW/g Date/Time: 10/24/03 13:02:40 Test Laboratory: Compliance Certification Services C1-Ant 1 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A Program Name: EUT Setup Congiguration 1_Antenna 1 Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: 802.11a; Frequency: 5320 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.4502 mho/m, ε r = 47.5599, ρ = 1000 kg/m 3 ) Phantom section: Flat Section DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 3.1mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 High/Area Scan (8x10x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 11.2 V/m Power Drift = -0.16 dB Maximum value of SAR = 0.626 mW/g High/Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Peak SAR (extrapolated) = 1.47 W/kg SAR(1 g) = 0.461 mW/g; SAR(10 g) = 0.181 mW/g Reference Value = 11.2 V/m Power Drift = -0.16 dB Maximum value of SAR = 0.607 mW/g Date/Time: 10/24/03 16:47:14 Test Laboratory: Compliance Certification Services C2-Ant 2 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A Program Name: EUT Setup Congiguration 2_Antenna 2 Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: 802.11a; Frequency: 5240 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.4502 mho/m, ε r = 47.5599, ρ = 1000 kg/m 3 ) Phantom section: Flat Section DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 3.1mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 High/Area Scan (8x10x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 2.79 V/m Power Drift = -0.13 dB Maximum value of SAR = 0.412 mW/g High/Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Peak SAR (extrapolated) = 1.06 W/kg SAR(1 g) = 0.338 mW/g; SAR(10 g) = 0.134 mW/g Reference Value = 2.79 V/m Power Drift = -0.13 dB Maximum value of SAR = 0.459 mW/g Date/Time: 10/24/03 16:47:14 Test Laboratory: Compliance Certification Services C2-Ant 2 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 0mm (Fix Surface) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 High/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 2.79 V/m Power Drift = 0.0 dB Maximum value of SAR = 0.188 mW/g Date/Time: 10/24/03 14:19:56 Test Laboratory: Compliance Certification Services C3-Ant 1 DUT: Tatung Co.; Type: TTAB-B12D; Serial: N/A Program Name: EUT Setup Congiguration 3_Antenna 1 Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: 802.11a; Frequency: 5240 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.4502 mho/m, …

Text truncated - open the document above for the full version.

RF Exposure Info

Date/Time: 10/24/03 10:39:22 Test Laboratory: Compliance Certification Services D5GHzV2_M5200_102403 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Program Name: System Performance Check at Body 5200 MHz Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: CW 5200MHz; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.4502 mho/m, ε r = 47.5599, ρ = 1000 kg/m 3 ) Phantom section: Flat Section DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 3.1mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 d=10mm, Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 89.6 V/m Power Drift = -0.0 dB Maximum value of SAR = 34.4 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Peak SAR (extrapolated) = 85.2 W/kg SAR(1 g) = 22.6 mW/g; SAR(10 g) = 6.23 mW/g Reference Value = 89.6 V/m Power Drift = -0.0 dB Maximum value of SAR = 32 mW/g 0 dB = 32mW/g Date/Time: 10/24/03 10:39:22 Test Laboratory: Compliance Certification Services D5GHzV2_M5200_102403 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 0mm (Fix Surface) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 d=10mm, Pin=250mW/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 89.6 V/m Power Drift = -0.1 dB Maximum value of SAR = 15 mW/g

RF Exposure Info

Text truncated - open the document above for the full version.