BOI-ULXATSCMaxiva ULX ATSC Series Digital Transmitter

Maxiva ULX ATSC Series Digital Transmitter User MANUAL 888-2715-001 Maxiva ULX ATSC Series Digital Transmitter February 19, 2010 Rev: A T.M. No. 888-2715-001 © Copyright Harris Corporation 2010 All rights reserved ii888-2715-0012/19/10 WARNING: Disconnect primary power prior to servicing. 2/19/10888-2715-001iii WARNING: Disconnect primary power prior to servicing. Technical Assistance Technical and troubleshooting assistance for HARRIS Transmission products is available from HARRIS Field Service (factory location: Quincy, Illinois, USA) during normal business hours (8:00 AM - 5:00 PM Central Time). Telephone +1-217-222-8200 to contact the Field Service Department; FAX +1-217-221-7086; or E-mail questions to [email protected]. Emergency service is available 24 hours a day, seven days a week, by telephone only. On-line assistance, including technical manuals, white papers, software downloads, and service bulletins, is available at http://support.broadcast.harris.com/eservice_enu. Address written correspondence to Field Service Department, HARRIS Broadcast Communications Division, P.O. Box 4290, Quincy, Illinois 62305-4290, USA. For other global service contact information, please visit: http://www.broadcast.harris.com/contact. NOTE: For all service and parts correspondence, you will need to provide the Sales Order number, as well as the Serial Number for the transmitter or part in question. For future reference, record those numbers here: ___________________/____________________ Please provide these numbers for any written request, or have these numbers ready in the event you choose to call regarding any Service, or Parts requests. For warranty claims it will be required, and for out of warranty products, this will help us to best identify what specific hardware was shipped. Replaceable Parts Service Replacement parts are available from HARRIS Service Parts Department from 7:00 AM to 11:00 PM Central Time, seven days a week. Telephone +1-217-222-8200 or email [email protected] to contact the Service Parts Department. Emergency replacement parts are available by telephone only, 24 hours a day, seven days a week by calling +1-217-222-8200. Unpacking Carefully unpack the equipment and preform a visual inspection to determine if any apparent damage was incurred during shipment. Retain the shipping materials until it has been verified that all equipment has been received undamaged. Locate and retain all PACKING CHECK LISTs. Use the PACKING CHECK LIST to help locate and identify any components or assemblies which are removed for shipping and must be reinstalled. Also remove any shipping supports, straps, and packing materials prior to initial turn on. Returns And Exchanges No equipment can be returned unless written approval and a Return Authorization is received from HARRIS Broadcast Communications Division. Special shipping instructions and coding will be provided to assure proper handling. Complete details regarding circumstances and reasons for return are to be included in the request for return. Custom equipment or special order equipment is not returnable. In those instances where return or exchange of equipment is at the request of the customer, or convenience of the customer, a restocking fee will be charged. All returns will be sent freight prepaid and properly insured by the customer. When communicating with HARRIS Broadcast Communications Division, specify the HARRIS Order Number or Invoice Number. iv888-2715-0012/19/10 WARNING: Disconnect primary power prior to servicing. 2/19/10888-2715-001MRH-1 WARNING: Disconnect primary power prior to servicing. Manual Revision History Maxiva ULX ATSC Series Digital Transmitter User Manual REV.DATEECNPages Affected AFEB 2010-Created MRH-2888-2715-0012/19/10 WARNING: Disconnect primary power prior to servicing. 2/19/10888-2715-001vii WARNING: Disconnect primary power prior to servicing. Guide to Using Harris Parts List Information The Harris Replaceable Parts List Index portrays a tree structure with the major items being leftmost in the index. The example below shows the Transmitter as the highest item in the tree structure. If you were to look at the bill of materials table for the Transmitter you would find the Control Cabinet, the PA Cabinet, and the Output Cabinet. In the Replaceable Parts List Index the Control Cabinet, PA Cabinet, and Output Cabinet show up one indentation level below the Transmitter and implies that they are used in the Transmitter. The Controller Board is indented one level below the Control Cabinet so it will show up in the bill of material for the Control Cabinet. The tree structure of this same index is shown to the right of the table and shows indentation level versus tree structure level. Example of Replaceable Parts List Index and equivalent tree structure: Replaceable Parts List Index Part Number Page Table 7-1. Transmitter 994 9283 001 7-2 Table 7-2. Control Cabinet 992 9244 002 7-3 Table 7-3. Controller Board 992 8344 002 7-6 Table 7-4. PA Cabinet 992 9400 002 7-7 Table 7-5. PA Amplifier 994 7894 002 7-9 Table 7-6. PA Amplifier Board 992 7904 002 7-10 Table 7-7. Output Cabinet 992 9450 001 7-12 The part number of the item is shown to the right of the description as is the page in the manual where the bill for that part number starts. Inside the actual tables, four main headings are used: •Table #-#. ITEM NAME - HARRIS PART NUMBER - this line gives the information that corresponds to the Replaceable Parts List Index entry; •HARRIS P/N column gives the ten digit Harris part number (usually in ascending order); •DESCRIPTION column gives a 25 character or less description of the part number; •REF. SYMBOLS/EXPLANATIONS column 1) gives the reference designators for the item (i.e., C001, R102, etc.) that corresponds to the number found in the schematics (C001 in a bill of material is equiva - lent to C1 on the schematic) or 2) gives added information or further explanation (i.e., “Used for 208V operation only…

Text truncated - open the document above for the full version.

ATSC series Transmitter FCC Certification Application HARRIS CORPORATION Broadcast Communications Division 3200 Wismann Lane Post Office Box 4290 Quincy, IL USA 62305-4290 telephone 1-217-222-8200 www.harris.com Request for Confidentiality Pursuant to 47CFR 0.459, we hereby request that the following Exhibits be withheld from public inspection. -Block Diagrams -Technical/Operation Description -Schematics -Tune-up Description These exhibits contain information of a proprietary nature to our company, and possibly to our customers also. Information which could be obtained from the cited Exhibits, which are commonly known as "Trade Secrets", includes printed circuit trace routing, component selection, RF circuit "broadbanding" techniques, mechanical construction layouts and modulation methods. The confidentiality of such information is carefully guarded within our company, and only shared when further disclosure is restricted by binding agreement. Additional proprietary information is contained within drawings, schematics and equipment configuration instructions, normally supplied to customers only after their purchase of the described equipment. Our customers, after having made such purchases, have no reason to share the documents with other parties and, in some cases, may be restricted from doing so by binding agreement. Additionally, those documents are normally supplied as hard copies as part of the equipment's documentation, and often in a size that is difficult to duplicate with standard office equipment. We are therefore concerned that in the event the above described information were to be made available in a public forum, particularly one as easy to access as the World Wide Web, our competitors, or those of our customers, could easily obtain and use it to compromise our ability, and that of our customers, to maintain our respective competitive positions in the marketplace worldwide. We therefore respectfully ask that you honor our request to maintain that confidentiality in regard to the selected documents. To support the requested confidentiality, we have placed the information requested to be kept confidential in Exhibits whose cover pages are marked “Confidential”. Sincerely, Carl B Williams Systems Engineer (217) 221-7334 (office) (217) 221-7088 (fax) [email protected]

Page 1 of 2 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Photos – External BOI-ULXATSC ULX Front View Page 2 of 2 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Unit Tested: ULX-6300AT

HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ FCCID Label ULX-6300AT 9920225102G 722-728 MHz 56 6.3 X 2083 60 31.5 BOI-ULXATSC FCCID Plate Location

Page 1 of 5 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Photos – Internal BOI-ULXATSC ULX Rear View, Door Removed Page 2 of 5 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Page 3 of 5 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Page 4 of 5 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Page 5 of 5 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™

DVF series Transmitter FCC Certification Application HARRIS CORPORATION Broadcast Communications Division 3200 Wismann Lane Post Office Box 4290 Quincy, IL USA 62305-4290 telephone 1-217-222-8200 www.harris.com RF Exposure statement Harris FCCID: BOI-ULXATSC To: FCC The transmission line, antenna, and supporting structure are integrated at the installation. RF Exposure is evaluated according to 47CFR1.1307 during installation and site licensing. Sincerely, Carl B Williams Systems Engineer (217) 221-7334 (office) (217) 221-7088 (fax) [email protected]

Page 1 of 32 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Certification of Compliance ULX System TV Transmitter FCC Title 47 This document is compiled to provide the data and records supporting a Certification of Compliance with FCC Rules set forth in 47CFR Parts 2 and 27. Certification as described in Part 2, Subpart J applies to all subsequent identical units marketed. Use of the Certification method requires that the required records are filed accompanying FCC Form 731. The test record shall be retained as required by 2.938(c). This series of transmitters is for use in a single frequency network for mobile video. They will operate in the 722-728 MHz band as authorized under FCC 47CFR27, on a single channel (56) with center frequency of 725 MHz. The Emission Designator is 6M00C7W. The modulation is a 6 MHz ATSC signal. The power level models differ in the number of power amplifiers that are used to attain that power level, with just two power amplifiers used for 1600W, up to eight for 6300W. The performance of multiple power amplifiers will be very close to the performance of any single power amplifier. The intention of these tests is to demonstrate, by tests conducted on a ULX-6300AT, the compliance of this series of transmitters. Our basis for this is that the performance of each of the transmitters is entirely governed by the performance of the individual modules. Therefore, measurements of the ULX-6300AT provide a sound basis to project the performance which will be shown by other models. Manufacturer Harris Broadcast Communications Street Address 3200 Wismann Lane City, State, Zip Quincy, IL 62305 Product being certified ULX Transmitter Series for Mobile Video Models ULX-6300AT, ULX-4700AT, ULX-3800AT, ULX- 3200AT, ULX-2400AT, and ULX-1600AT. FCC Identifier BOI-ULXATSC Type of Emission 6M00C7W, Single Frequency Network Frequency Range One 6 MHz channel 722-728 MHz (Channel 56) Power Range Adjustable from zero to rated power Maximum Power 6300 watts ahead of the output filter Model Tested ULX-6300AT Assembly Number 9950225102G Serial Number Tested JW30001805-015 Test Location Harris Bldg 5, 2700 Ellington Road, Quincy, IL Persons responsible for testing are: ________________________________________ _______________ (Date) ________________________________________ _______________ (Date) Page 2 of 32 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Table of Contents As an aid to locating needed information in this document, the following Table of Contents links each portion of the record with the appropriate Rule and locates it in this document by page number. 1. Rule 47CFR2.938 Retention of records. .................................................................................. 3 2. Rule 47CFR2.1033 Application for certification..................................................................... 4 3. General Information.................................................................................................................. 10 4. Rule 47CFR 2.1046 Measurements required: RF power output............................................... 11 4.1. Test Methodology ..................................................................................................................... 11 4.2. Test Equipment Used................................................................................................................ 11 4.3. Power Output Test Results .......................................................................................................12 5. Rule 47CFR2.1047 Measurements required: Modulation characteristics.......................... 12 5.1. Harris Response ........................................................................................................................ 12 6. Rule 47CFR2.1049 Measurements required: Occupied bandwidth.......................................... 12 6.1. Test Methodology ..................................................................................................................... 12 6.2. Occupied Bandwidth Test Setup............................................................................................... 13 6.3. Test Equipment Used................................................................................................................ 13 6.4. Test Results............................................................................................................................... 13 7. Rule 47CFR2.1051 Measurements required: Spurious emissions at antenna terminals. .......... 14 7.1. Test Methodology ..................................................................................................................... 14 7.2. Spurious Emissions Test Setup................................................................................................. 15 7.3. Test Equipment Used................................................................................................................ 16 7.4. Spurious Test Results, Close-In................................................................................................16 7.5. Spurious Test Results, Wideband ............................................................................................. 18 8. Rule 47CFR2.1053 Measurements required: Field strength of spurious radiation........... 22 8.1. Test Methodology ..................................................................................................................... 22 8.2. Radiated Emissions Test Setup ................................................................................................. 23 8.3. Test Equipment Used................................................................................................................ 24 8.4. Test Results............................................................................................................................... 24 9. Rule 47CFR2.1055 Measurements required: Frequency st…

Text truncated - open the document above for the full version.

Page 1 of 2 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Photos – Test Setups, BOI-ULXATSC Horn Antenna from Front Biconicalog Antenna, Rear Page 2 of 2 HARRIS CORPORATION Broadcast Communications Division assuredcommunications™ Substitution Antenna Setup Spurious and Out-of-Band Equipment