BW3DB-2068Mobile Phone

DBTEL is a registered trademark of DBTEL Incorporated. Copyright © 2001 DBTEL Incorporated. All rights reserved. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. DBTEL Incorporated reserves the right to make changes in technical and product specifications without provisional notification. Address: No.29, Tzu Chiang St, Tu-Cheng, Taipei, Taiwan. Website: http://www.dbtel.com.tw Warning: Use only approved accessories and battery. Do not connect to any incompatible products; otherwise, it will invalidate the recognition or warranty applying to your mobile phone. The font type of the legend, graphics and icons in the user manual may differ from that shown on the handset. Technical specifications and some certain features are subject to change in technology, design, software upgrade and availability. USER MANUAL D5 Notice To reduce exposure to electromagnetic radiation, use it with properly. SAR Radiation Limit: 1.6 W/Kg Tested SAR Rating: 0.671 w/kg (CAUTION - It's required to provide at least 1.5 cm separation between the device and the user body.) Safety Information DBTEL handset is the first Specific Absorption Rate (SAR) compliance in Taiwan. Compliance with International standard SAR Radiation Limit: 1.6 W/Kg Tested SAR Rating: 0.671 W/Kg Product Safety Product safety is always the first priority of DBTEL Incorporated. With the SAR Safety Certificate, the persistence we insist on has been proved that to be right, again. Customer’s safety is of paramount importance to us, there is no exception. FCC requirements A declaration of conformity to the essential requirements. Identification of the United States of America in which the equipment is intended to be used. Identification of the public telecommunication network to which the equipment is intended to be connected. “ Hereby, we <DBTEL Inc.>, declares that this D5 is in compliance with the essential requirements and other relevant provisions of “FCC Part 2(Section 2 1093) & FCC OET Bulletin 65”. Contents 1 European Union - SAR 3 For Your Safety 4 Your D5 5 Your phone ------------------------------------------5 Key description -------------------------------------5 Function key table --------------------------------5 Display indicators ---------------------------------6 Installation 7 SIM card and battery ------------------------------7 Installation of the SIM card and the battery ----7 Removal of the SIM card and the battery ------7 Battery Information 8 Battery charging ------------------------------------8 Battery specifications ------------------------------8 Notice on battery charging and discharging ----8 Low battery indicator -------------------------------8 Use of battery ---------------------------------------8 Battery disposal ------------------------------------8 Quick & Easy 10 Menu Map 11 Call Functions 22 Turning your phone ON and OFF -------------22 When PIN is requested ------------------------22 Unlock the blocked SIM card ------------------22 Making calls ---------------------------------------22 International calls -------------------------------22 Making calls via the Phone Book -------------22 Redial calls missed, received and dialled ----22 Speed dialling -----------------------------------23 Calling your voice mailbox ---------------------23 Answering calls -----------------------------------23 Call waiting --------------------------------------23 In-call menu -------------------------------------23 Multiparty ----------------------------------------24 Other operations ---------------------------------25 Input text -----------------------------------------25 Using Predictive Text input -----------------25 Using Capitalization input ----------------------26 Using The Menu 27 Accessing to menu function -------------------27 Returning from menu function -----------------27 Messages 28 Text messages -----------------------------------28 Multimedia messages ---------------------------29 Message settings --------------------------------30 Records 32 Dialed calls ---------------------------------------32 Received Calls -----------------------------------32 Missed Calls -------------------------------------32 Delete All -----------------------------------------32 Call Register -------------------------------------32 LCD 33 Wallpapers ---------------------------------------33 Background Color -------------------------------33 LCD Contrast ------------------------------------33 Backlight -----------------------------------------33 LED Alert -----------------------------------------33 Profiles 34 Normal --------------------------------------------34 Mute ----------------------------------------------34 Meeting -------------------------------------------34 Outdoor -------------------------------------------34 Customized --------------------------------------34 Clock 35 Alarm ---------------------------------------------35 Date Setting --------------------------------------35 Time Setting -------------------------------------35 Display Mode ------------------------------------35 Time Zone ----------------------------------------35 Auto Power Off ----------------------------------35 Calendar -----------------------------------------35 Settings 36 Normal Settings ---------------------------------36 Irda Settings -------------------------------------36 Call Settings -------------------------------------36 Network Settings --------------------------------37 Security Settings ---------------------------------37 Time&Cost Settings -----------------------------38 Short Cut Key ------------------------------------38 JAVATM39 JAVA TM List ---------------------------------------39 Download Settings ------------------------------39 Memory State ------------------------------------39 About JAVA™ ------------------------------------39 Extras40 Contents 2 My Collections ----------------------------------…

Text truncated - open the document above for the full version.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 August 31, 2004 RE: DBTEL Incorporated FCC ID: BW3DB-2068 I have a few comments on this Application. Depending on your responses, kin dly understand there may be additional comments. 1.) The Confidentiality letter calls for Block Diagram, Schematics and Parts List to be held Confidential. There is no mention of Tune-Up Procedure. Please confirm that Tune-Up should not be held Confidential. 2.) The Tune Up exhibit contains inside the Block Diagram that was requested be held Confidential. This discrepancy must be resolved before a Grant can be issued. 3.) This product is multiband and contains both DCS/GSM functions that are not applicable in USA. Please provide a letter from DBTEL that attests that non-USA bands [list the frequency bands and system] will not be available in US. 4.) The Tune-Up procedure does not contain any target values for RF power. Please revise. 5.) The Internal Photographs appear incomplete. Please remember that all RF shields must be removed, and both sides of any printed wiring board should be photographed. 6.) The label is of incorrect format. The FCC logo should be removed and simply the identifier in the format “FCC ID: XXXxxxx” should be presented. 7.) In addition, the label should contain the language found in 47CFR 15.19(a)(1). This language is commonly referred to as the “one-part statement” and applies to all Licensed radio transmitters that contain a receiver. It is a stronger that the “two-part statement’ of 15.19(a)(2) [common to all Part 15 computers and low power transmitters] and allows for stronger legal rights to the consumer against received interference. 8.) Test Report: I am concerned about the Tx Spurious Emissions test. The signal presented is a repeating 1ms pulsed transmission viewed on a plot, multiple GHz in span, with a relatively short sweep time. Kindly explain how the laboratory was assured that the maximum spurious emissions are shown. 9.) Test Report: Section 4.7.3 gives a description of the substitution method for finding spurious emissions, but the data tables of 4.7.5 appear to show only the standard radiated field strength methodology. Please review and correct. 10.) Test Report. 47CFR Part 2.1057 requires that measurements be made to the 10 th harmonic. The test results provided in Section 4.8.7 does not seem to comply with this rule. Please review. 11.) Please provide voltage and current through the final amplifier as required by the Rules in 47CFR 2.1041(c)(8). 12.) Please provide measurements justifying the requested emission designator of 300KGXW. William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. z Page 2 August 31, 2004 Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 October 4, 2004 RE: DBTEL Incorporated FCC ID: BW3DB-2068 I have a few comments on this Application. Depending on your responses, kindly understand there may be additional comments. 1.) Kindly add the required 2.1033(c)(8) information for voltage and currents through the final amplifying device. 2.) FYI: Please be sure that all tune-up procedures contain RF output target values and their tolerance. This was discussed today in your phone conversation with AmericanTCB. 3.) FYI: No response needed In the future please kindly do your best to shrink the size of your SAR reports. It is difficult for any examiner to manipulate files of this size, either FCC or TCB. Your cooperation would be appreciated. 4.) Please refer to page 26 of your SAR report. The summary validation table is presented for body data only. Should there also be head validation data presented? William H. Graff President and Director of Engineering mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

FCC ID Label Location

Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14

FCC ID: BW3DB-2068 ADT No. 930729L09 Operational Description This device is the Mobile Phone and operated frequency in the 1.9GHz (PCS) 900MHz(E- GSM)/1800MHz (DCS)/1900MHz (PCS) in band. When GSMK technique will be applied under the transmission data and voice. In addition, the GPRS transmission rate is the class 10. The transmitter of the EUT is powered by charged battery. The antenna is External antenna. There is no antenna connector. The other instruction, please have a look at the users manual.

FCC ID: BW3DB-2068 Report No.: SA930729L091Issued: Aug. 04, 2004 SAR TEST REPORT REPORT NO.: SA930729L09 MODEL NO.: D5(2068) RECEIVED: Jul. 29, 2004 TESTED: Aug. 02 ~ 03, 2004 APPLICANT: DBTEL Incorporated ADDRESS: No. 29, Tzu Chiang St., Tu-Cheng, Taipei, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: 47 14th Lin, Chiapau Tsun, Linko, Taipei, Taiwan, R.O.C. This test report consists of 34 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA FCC ID: BW3DB-2068 Report No.: SA930729L092Issued: Aug. 04, 2004 Table of Contents 1.CERTIFICATION........................................................................................................................ 3 2.GENERAL INFORMATION........................................................................................................ 4 2.1GENERAL DESCRIPTION OF EUT.......................................................................................... 4 2.2GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................................... 5 2.3GENERAL INOFRMATION OF THE SAR SYSTEM ................................................................. 5 2.4GENERAL DESCRIPTION OF THE SPATIAL PEAK SAR EVALUATION ................................ 9 3.DESCRIPTION OF TEST MODES AND CONFIGURATIONS................................................ 12 3.1TOUCH/CHEEK TEST POSITION .......................................................................................... 13 3.2TILT TEST POSITION ............................................................................................................. 14 3.3BODY-WORN CONFIGURATION ........................................................................................... 14 4.DESCRIPTION OF SUPPORT UNITS .................................................................................... 15 5.TEST RESULTS ...................................................................................................................... 16 5.1TEST PROCEDURES .............................................................................................................16 5.2MEASURED SAR RESULT ..................................................................................................... 17 5.3SAR LIMITS ............................................................................................................................. 21 5.4RECIPES FOR TISSUE SIMULATING LIQUIDS .................................................................... 21 5.5TEST EQUIPMENT FOR TISSUE PROPERTY...................................................................... 23 6.SYSTEM VALIDATION ............................................................................................................24 6.1TEST EQUIPMENT ................................................................................................................. 24 6.2TEST PROCEDURE................................................................................................................ 24 6.3VALIDATION RESULT............................................................................................................. 26 6.4SYSTEM VALIDATION UNCERTAINTIES .............................................................................. 27 7.MEASUREMENT SAR PROCEDURE UNCERTAINTIES ...................................................... 28 7.1PROBE CALIBRATION UNCERTAINTY ................................................................................ 28 7.2ISOTROPY UNCERTAINTY.................................................................................................... 28 7.3BOUNDARY EFFECT UNCERTAINTY................................................................................... 29 7.4PROBE LINEARITY UNCERTAINTY ...................................................................................... 29 7.5READOUT ELECTRONICS UNCERTAINTY.......................................................................... 30 7.6RESPONSE TIME UNCERTAINTY ........................................................................................ 30 7.7INTEGRATION TIME UNCERTAINTY .................................................................................... 31 7.8PROBE POSITIONER MECHANICAL TOLERANCE ............................................................. 31 7.9PROBE POSITIONING............................................................................................................32 7.10 PHANTOM UNCERTAINTY .................................................................................................... 32 7.11 DASY4 UNCERTAINTY BUDGET .......................................................................................... 33 8.INFORMATION ON THE TESTING LABORATORIES............................................................ 34 APPENDIX A: TEST CONFIGURATIONS AND TEST DATA APPENDIX B: ADT SAR MEASUREMENT SYSTEM APPENDIX C: PHOTOGRAPHS OF SYSTEM VALIDATION APPENDIX D: SYSTEM CERTIFICATE & CALIBRATION FCC ID: BW3DB-2068 Report No.: SA930729L093Issued: Aug. 04, 2004 1. CERTIFICATION PRODUCT : Mobile Phone MODEL NO. : D5(2068) BRAND NAME : DBTEL APPLICANT : DBTEL Incorporated TEST DATE: Aug. 02 ~ 03, 2004 TEST ITEM: ENGINEERING SAMPLE STANDARDS : FCC Part 2 (Section 2.1093), FCC OET Bulletin 65, Supplement C (01-01), RSS-102 The above equipment have been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPAR…

Text truncated - open the document above for the full version.

Date/Time: 08/02/04 17:50:42 Test Laboratory: Advance Data Technology D5 LeftHeadSide Cheek PCS1900 Mode 5 Ch512 DUT: Mobile Phone ; Type: D5 ; Test Channel Frequency: 1850.2 MHz Communication System: PCS 1900 ; Frequency: 1850.2 MHz; Duty Cycle: 1:8.3 Medium: HSL1900 (σ = 1.3944 mho/m, ε r = 40.0081, ρ = 1000 kg/m 3 ) ; Liquid level : 152mm Phantom section: Left Section ; DUT test position : Tilt ; Modulation type: GMSK Antenna type : External Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(5.1, 5.1, 5.1) ; Calibrated: 2003/8/29 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2003/8/15 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.6 Build 115 Touch position - Low Channel/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 4.2 V/m Power Drift = 0.2 dB Maximum value of SAR = 0.519 mW/g Touch position - Low Channel 2/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.647 W/kg SAR(1 g) = 0.469 mW/g; SAR(10 g) = 0.305 mW/g Reference Value = 4.2 V/m Power Drift = 0.2 dB Maximum value of SAR = 0.502 mW/g Date/Time: 08/02/04 18:22:18 Test Laboratory: Advance Data Technology D5 LeftHeadSide Cheek PCS1900 Mode 5 Ch661 DUT: Mobile Phone ; Type: D5 ; Test Channel Frequency: 1880 MHz Communication System: PCS 1900 ; Frequency: 1880 MHz ; Duty Cycle: 1:8.3 Medium: HSL1900 (σ = 1.4267 mho/m, ε r = 39.8804, ρ = 1000 kg/m 3 ) ; Liquid level : 152mm Phantom section: Left Section ; DUT test position : Cheek ; Modulation type: GMSK Antenna type : External Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790; ConvF(5.1, 5.1, 5.1) ; Calibrated: 2003/8/29 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2003/8/15 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.6 Build 115 Touch position - Middle Channel/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 5.02 V/m Power Drift = 0.2 dB Maximum value of SAR = 0.648 mW/g Touch position - Middle Channel/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.824 W/kg SAR(1 g) = 0.599 mW/g; SAR(10 g) = 0.387 mW/g Reference Value = 5.02 V/m Power Drift = 0.2 dB Maximum value of SAR = 0.635 mW/g Date/Time: 08/02/04 18:50:38 Test Laboratory: Advance Data Technology D5 LeftHeadSide Cheek PCS1900 Mode 5 Ch810 DUT: Mobile Phone ; Type: D5 ; Test Channel Frequency: 1909.8 MHz Communication System: PCS 1900 ; Frequency: 1909.8 MHz ; Duty Cycle: 1:8.3 Medium: HSL1900 (σ = 1.4606 mho/m, ε r = 39.7443, ρ = 1000 kg/m 3 ) ; Liquid level : 152mm Phantom section: Left Section ; DUT test position : Cheek ; Modulation type: GMSK Antenna type : External Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790; ConvF(5.1, 5.1, 5.1) ; Calibrated: 2003/8/29 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2003/8/15 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.6 Build 115 Touch position - High Channel/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 5.76 V/m Power Drift = 0.07 dB Maximum value of SAR = 0.684 mW/g Touch position - High Channel/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.9 W/kg SAR(1 g) = 0.633 mW/g; SAR(10 g) = 0.407 mW/g Reference Value = 5.76 V/m Power Drift = 0.07 dB Maximum value of SAR = 0.682 mW/g Date/Time: 08/02/04 19 :18:22 Test Laboratory: Advance Data Technology D5 LeftHeadSide Tilt PCS1900 Mode 6 Ch512 DUT: Mobile Phone ; Type: D5 ; Test Channel Frequency: 1850.2 MHz Communication System: PCS 1900 ; Frequency: 1850.2 MHz; Duty Cycle: 1:8.3 Medium: HSL1900 (σ = 1.3944 mho/m, ε r = 40.0081, ρ = 1000 kg/m 3 ) ; Liquid level : 152mm Phantom section: Left Section ; DUT test position : Tilt ; Modulation type: GMSK Antenna type : External Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(5.1, 5.1, 5.1) ; Calibrated: 2003/8/29 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2003/8/15 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.6 Build 115 Tilt position - Low Channel/Area Scan (7x12x1): Measurement grid: dx=15mm, dy=15mm Reference Value = 7.49 V/m Power Drift = -0.05 dB Maximum value of SAR = 0.223 mW/g Tilt position - Low Channel/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Peak SAR (extrapolated) = 0.286 W/kg SAR(1 g) = 0.199 mW/g; SAR(10 g) = 0.121 mW/g Reference Value = 7.49 V/m Power Drift = -0.05 dB Maximum value of SAR = 0.215 mW/g Date/Time: 08/02/04 19:45:34 Test Laboratory: Advance Data Technology D5 LeftHeadSide Tilt PCS1900 Mode 6 Ch661 DUT: Mobile Phone ; Type: D5 ; Test Channel Frequency: 1880 MHz Communication System: PCS 1900 ; Frequency: 1880 MHz; Duty Cycle: 1:8.3 Medium: HSL1900 (σ = 1.4267 mho/m, ε r = 39.8804, ρ = 1000 kg/m 3 ) ; Liquid level : 152mm Phantom section: Left Section ; DUT test position : Tilt ; Modulation type: GMSK Antenna type : External Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.0 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(5.1, 5.1, 5.1) ; Calibrated: 2003/8/29 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2003/8/15 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.6 Build 115 Tilt position - Middle Channel/Area Scan (7x12x…

Text truncated - open the document above for the full version.

D3: DAE

D4: 1900MHZ SYSTEM VALIDATION DIPOLE

FCC ID: BW3DB-2068 Report No.: RF930729L091Issued: 04 August, 2004 FCC Test Report REPORT NO.: RF930729L09 MODEL NO.: D5(2068) RECEIVED: 29 July , 2007 TESTED: 31 July, 2004 ~ 04 August, 2004 APPLICANT: DBTEL Incorporated ADDRESS: No. 29, Tzu Chiang St., Tu-Cheng, Taipei, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 19, Hwa Ya 2nd Rd., Kueishan, Taoyuan, Taiwan, R.O.C. This test report consists of 61 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA FCC ID: BW3DB-2068 Report No.: RF930729L092Issued: 04 August, 2004 Table of Contents 1CERTIFICATION ........................................................................................... 4 2SUMMARY OF TEST RESULTS................................................................... 5 2.1GENERAL DESCRIPTION OF EUT.............................................................. 6 3GENERAL INFORMATION ........................................................................... 7 3.1GENERAL DESCRIPTION OF EUT.............................................................. 7 3.2DESCRIPTION OF TEST MODES................................................................ 8 3.3GENERAL DESCRIPTION OF APPLIED STANDARDS ............................... 8 3.4DESCRIPTION OF SUPPORT UNITS .......................................................... 9 4TEST TYPES AND RESULTS..................................................................... 10 4.1MODULATION CHARACTERISTICS.......................................................... 10 4.1.1DESCRIPTION OF MODULATION TECHNIQUE ....................................... 10 4.1.2THE ACTIVE TIME SLOT 8 MODULATED FRAME PLOT...........................11 4.2OUTPUT POWER MEASUREMENT .......................................................... 13 4.2.1LIMITS OF OUTPUT POWER MEASUREMENT........................................ 13 4.2.2TEST INSTRUMENTS ................................................................................ 13 4.2.3TEST PROCEDURES................................................................................. 14 4.2.4TEST SETUP .............................................................................................. 15 4.2.5EUT OPERATING CONDITIONS................................................................ 16 4.2.6TEST RESULTS.......................................................................................... 17 4.3FREQUENCY STABILITY MEASUREMENT .............................................. 19 4.3.1LIMITS OF FREQUENCY STABILIITY MEASUREMENT ........................... 19 4.3.2TEST INSTRUMENTS ................................................................................ 19 4.3.3TEST PROCEDURE ................................................................................... 20 4.3.4TEST SETUP .............................................................................................. 20 4.3.5TEST RESULTS.......................................................................................... 21 4.4OCCUPIED BANDWIDTH MEASUREMENT.............................................. 23 4.4.1LIMITS OF OCCUPIED BANDWIDTH MEASUREMENT ........................... 23 4.4.2TEST INSTRUMENTS ................................................................................ 23 4.4.3TEST SETUP .............................................................................................. 23 4.4.4TEST PROCEDURES................................................................................. 24 4.4.5EUT OPERATING CONDITION .................................................................. 24 4.4.6TEST RESULTS.......................................................................................... 24 4.5BAND EDGE MEASUREMENT .................................................................. 31 4.5.1LIMITS OF BAND EDGE MEASUREMENT................................................ 31 4.5.2TEST INSTRUMENTS ................................................................................ 31 FCC ID: BW3DB-2068 Report No.: RF930729L093Issued: 04 August, 2004 4.5.3TEST SETUP .............................................................................................. 31 4.5.4TEST PROCEDURES................................................................................. 32 4.5.5EUT OPERATING CONDITION .................................................................. 32 4.5.6TEST RESULTS.......................................................................................... 33 4.6CONDUCTED SPURIOUS EMISSIONS..................................................... 35 4.6.1LIMITS OF CONDUCTED SPURIOUS EMISSIONS MEASUREMENT...... 35 4.6.2TEST INSTRUMENTS ................................................................................ 35 4.6.3TEST PROCEDURE ................................................................................... 36 4.6.4TEST SETUP .............................................................................................. 36 4.6.5EUT OPERATING CONDITIONS................................................................ 36 4.6.6TEST RESULTS.......................................................................................... 37 4.7EFFECTIVE RADIATED POWER MEASUREMENT .................................. 49 4.7.1LIMITS OF RADIATED EMISSION MEASUREMENT................................. 49 4.7.2TEST INSTRUMENTS ................................................................................ 50 4.7.3TEST PROCEDURES................................................................................. 51 4.7.4DEVIATION FROM TEST STANDARD ....................................................... 51 4.7.5TEST SETUP ......................................................…

Text truncated - open the document above for the full version.

FCC ID: BW3DB-2068 Report No.: …

Text truncated - open the document above for the full version.