CASTMAB1CMobile Transceiver

March 2004 © Tait Electronics LtdTait general software licence agreement1 Tait general software licence agreement This legal document is an Agreement between you (the “Licensee”) and Tait Electronics Limited (“Tait”). By using any of the Software or Firmware items prior- installed in the related Tait product, included on this CD or downloaded from the Tait website, (hereinafter referred to as “the Software or Firmware”) you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install and use any of the Software or Firmware. If you install and use any of the Software or Firmware that will be deemed to be acceptance of the terms of this licence agreement. The terms of this agreement shall apply subject only to any express written terms of agreement to the contrary between Tait and the Licensee. Licence TAIT GRANTS TO YOU AS LICENSEE THE NON- EXCLUSIVE RIGHT TO USE THE SOFTWARE OR FIRMWARE ON A SINGLE MACHINE PROVIDED YOU MAY ONLY: 1. COPY THE SOFTWARE OR FIRMWARE INTO ANY MACHINE READABLE OR PRINTED FORM FOR BACKUP PURPOSES IN SUPPORT OF YOUR USE OF THE PROGRAM ON THE SINGLE MACHINE (CERTAIN PROGRAMS, HOWEVER, MAY INCLUDE MECHANISMS TO LIMIT OR INHIBIT COPYING, THEY ARE MARKED “COPY PROTECTED”), PROVIDED THE COPYRIGHT NOTICE MUST BE REPRO- DUCED AND INCLUDED ON ANY SUCH COPY OF THE SOFTWARE OR FIRMWARE; AND / OR 2. MERGE IT INTO ANOTHER PROGRAM FOR YOUR USE ON THE SINGLE MACHINE (ANY PORTION OF ANY SOFTWARE OR FIRMWARE MERGED INTO ANOTHER PROGRAM WILL CONTINUE TO BE SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT). THE LICENSEE MAY NOT DUPLICATE, MODIFY, REVERSE COMPILE OR REVERSE ASSEMBLE ANY SOFTWARE OR FIRMWARE IN WHOLE OR PART. Title to Software THIS AGREEMENT DOES NOT CONSTITUTE A CONTRACT OF SALE IN RELATION TO THE SOFT- WARE OR FIRMWARE SUPPLIED TO THE LICEN- SEE. NOT WITHSTANDING THE LICENSEE MAY OWN THE MAGNETIC OR OTHER PHYSICAL MEDIA ON WHICH THE SOFTWARE OR FIRMWARE WAS ORIGINALLY SUPPLIED, OR HAS SUBSEQUENTLY BEEN RECORDED OR FIXED, IT IS A FUNDAMENTAL TERM OF THIS AGREEMENT THAT AT ALL TIMES TITLE AND OWNERSHIP OF THE SOFTWARE OR FIRMWARE, WHETHER ON THE ORIGINAL MEDIA OR OTHERWISE, SHALL REMAIN VESTED IN TAIT OR THIRD PARTIES WHO HAVE GRANTED LICENCES TO TAIT. Term and Termination THIS LICENCE SHALL BE EFFECTIVE UNTIL TERMI- NATED IN ACCORDANCE WITH THE PROVISIONS OF THIS AGREEMENT. THE LICENSEE MAY TERMINATE THIS LICENCE AT ANY TIME BY DESTROYING ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCIATED WRITTEN MATERI- ALS. THIS LICENCE WILL BE TERMINATED AUTO- MATICALLY AND WITHOUT NOTICE FROM TAIT IN THE EVENT THAT THE LICENSEE FAILS TO COMPLY WITH ANY TERM OR CONDITION OF THIS AGREEMENT. THE LICENSEE AGREES TO DESTROY ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCIATED WRITTEN MATERI- ALS IN THE EVENT OF SUCH TERMINATION. 2Tait general software licence agreement Limited Warranty THE SOFTWARE OR FIRMWARE IS SUPPLIED BY TAIT AND ACCEPTED BY THE LICENSEE “AS IS” WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT BEING LIMITED TO ANY IMPLIED WARRANTIES AS TO MERCHANTABIL- ITY OR FITNESS FOR ANY PARTICULAR PURPOSE. THE LICENSEE ACKNOWLEDGES THAT THE SOFT- WARE OR FIRMWARE IS USED BY IT IN BUSINESS AND ACCORDINGLY TO THE MAXIMUM EXTENT PERMITTED BY LAW NO TERMS OR WARRANTIES WHICH ARE IMPLIED BY LEGISLATION SHALL APPLY TO THIS AGREEMENT. TAIT DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFT- WARE OR FIRMWARE WILL MEET THE LICENSEE’S REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE OR FIRMWARE WILL BE UNINTERRUPTED OR ERROR FREE. Exclusion of Liability TAIT’S ENTIRE LIABILITY AND THE LICENSEE’S EXCLUSIVE REMEDY SHALL BE THE FOLLOWING: 1. IN NO CIRCUMSTANCES SHALL TAIT BE UNDER ANY LIABILITY TO THE LICENSEE, OR ANY OTHER PERSON WHATSOEVER, FOR ANY DIRECT OR CONSEQUENTIAL DAMAGE ARIS- ING OUT OF OR IN CONNECTION WITH ANY USE OR INABILITY OF USING THE SOFTWARE OR FIRMWARE. 2. TAIT WARRANTS THE OPERATION OF THE SOFT- WARE OR FIRMWARE ONLY WITH THE OPERAT- ING SYSTEM FOR WHICH IT WAS DESIGNED. USE OF THE SOFTWARE OR FIRMWARE WITH AN OPERATING SYSTEM OTHER THAN THAT FOR WHICH IT WAS DESIGNED MAY NOT BE SUPPORTED BY TAIT, UNLESS OTHERWISE EXPRESSLY AGREED BY TAIT. General THE LICENSEE CONFIRMS THAT IT SHALL COMPLY WITH THE PROVISIONS OF LAW IN RELATION TO THE SOFTWARE OR FIRMWARE. Law and Jurisdiction THIS AGREEMENT SHALL BE SUBJECT TO AND CONSTRUED IN ACCORDANCE WITH NEW ZEALAND LAW AND DISPUTES BETWEEN THE PARTIES CONCERNING THE PROVISIONS HEREOF SHALL BE DETERMINED BY THE NEW ZEALAND COURTS OF LAW. PROVIDED HOWEVER TAIT MAY AT ITS ELECTION BRING PROCEEDINGS FOR BREACH OF THE TERMS HEREOF OR FOR THE ENFORCEMENT OF ANY JUDGEMENT IN RELA- TION TO A BREACH OF THE TERMS HEREOF IN ANY JURISDICTION TAIT CONSIDERS FIT FOR THE PURPOSE OF ENSURING COMPLIANCE WITH THE TERMS HEREOF OR OBTAINING RELIEF FOR BREACH OF THE TERMS HEREOF. No Dealings THE LICENSEE MAY NOT SUBLICENSE, ASSIGN OR TRANSFER THE LICENCE OR THE PROGRAM EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREE- MENT. ANY ATTEMPT OTHERWISE TO SUBLICENSE, ASSIGN OR TRANSFER ANY OF THE RIGHTS, DUTIES OR OBLIGATIONS HEREUNDER IS VOID. No Other Terms THE LICENSEE ACKNOWLEDGES THAT IT HAS READ THIS AGREEMENT, UNDERSTANDS IT AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS. THE LICENSEE FURTHER AGREES THAT SUBJECT ONLY TO ANY EXPRESS WRITTEN TERMS OF AGREEMENT TO THE CONTRARY BETWEEN TAIT AND THE LICENSEE THIS IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN IT AND TAIT IN RELATION TO THE SOFTWARE OR FIRMWARE WHICH SUPER- SEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN AND ANY OTHER COMMUNI- CATIONS BETWEEN THE LICENSEE AND TAIT RELATING TO THE SOFTWARE OR FIRMWARE. About this guide3 About this guide This user’s guide provides information about the TM8250 and TM8255 mobile radios and is divided into two parts.
Part A explains how the TM8255 radio operates. The TM8250 radio has a control head without user controls, so no TM8250…

Text truncated - open the document above for the full version.

TELTEST Laboratories Tait Electronics Ltd PO Box 1645 558 Wairakei Road Christchurch New Zealand Phone: 64 – 3 – 358 1026 Fax: 64 – 3 – 358 3903 11 August 2004 To Whom It May Concern: TMAB1C Mobile Transceiver This equipment meets the requirements of FCC Rules Part 90.203(e) and (g) as applicable. Programming of this product’s transmit frequencies can be performed ONLY by the manufacturer or by service or maintenance personnel. The operator cannot program transmit frequencies using the equipment’s external operation controls. Yours faithfully, Garry Pringle (Compliance Laboratory Technician)

FCC ID: [CASTMAB1C] Request for Confidentiality In accordance with 47 C.F.R. Section 0.459, we, (Tait Electronics Limited), hereby request confidentiality for the [Block diagrams, Schematics, Parts Lists, Tune up and Operational Description] presented for certification. In support of the Request for Confidentiality, the following is stated: Enclosed within this application is technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to our disadvantage. To assist in assuring that we receive the full value of our product and protect its competitive posture, we respectfully request this grant of confidentiality. [Steve Crompton] [Tait Electronics Limited]

Pos Item Description Len Qt y Units Effective Exp StdCost W/H Circuit References 10 001-10002-02 Diode SMD BB202 VCAP SOD523 0 1 ea 19-Jun-03 TELMS6 D2 30 002-10054-02 IC SMD TMS320VC5402 144TQFP 0 1 ea 19-Jun-03 TELMS6 IC2 40 002-10093-66 IC 93C66 4k Serial Eeprom Tsop 0 1 ea 26-Aug-03 TELMS6 IC6 50 002-10793-18 IC TPS79318 1V8 LD0 200mA Reg 0 1 ea 19-Jun-03 TELMS6 IC10 60 002-12880-00 IC 28W800 Bot Flash 90ns Tsop 0 1 ea 19-Jun-03 TELMS6 IC5 70 002-74910-41 IC SMD 74V1G04 Inverter SC70 0 1 ea 19-Jun-03 TELMS6 IC4 80 014-08100-30 Cap Tant SMD 100u 10v Loesr D 0 2 ea 19-Jun-03 TELMS6 C48, C49 120 018-13150-00 Cap 0603 150p 50v NPO +-5% 0 2 ea 19-Jun-03 TELMS6 C51, C52 130 018-16100-00 Cap 0603 100n 16vx7r+- 10% 0 32 ea 27-Aug-03 TELMS6 C10, C12, C17, C23, C24, C25, C26, C27, C28, C29, C31, C32, C33, C34, C35, C36, C37, C38, C39, C4, C43, C44, C45, C46, C50, C57, C58, C59, C60, C61, C7, C9 150 038-13470-00 Res 0603 470e 1/16w +- 5% 0 2 ea 19-Jun-03 TELMS6 R23, R3 160 038-14150-00 Res 0603 1k5 1/16w +-5% 0 2 ea 19-Jun-03 TELMS6 R10, R7 180 038-15470-10 Res 0603 47k 1/16w+-1% 0 3 ea 19-Jun-03 TELMS6 R14, R26, R27 200 038-17100-00 Res 0603 1m 1/16w +-5% 0 1 ea 19-Jun-03 TELMS6 R9 210 159-77560-35 Ind SMD 0603 5.6uh 10% Smi F 0 1 ea 19-Jun-03 TELMS6 L1 420 038-10000-00 Res 0603 Zero 0hm 1/16w +-5% 0 1 ea 25-Jun-03 TELMS6 R16 430 038-12100-00 Res 0603 10e 1/16w +-5% 0 1 ea 25-Jun-03 TELMS6 R17 460 018-11180-10 Cap 0603 1p8 50v NPO+- 0.1p 0 1 ea 7-Jul-03 TELMS6 C55 470 018-12180-10 Cap 0603 18p 50v NPO +- 1% 0 2 ea 7-Jul-03 TELMS6 C53, C54 480 018-12100-10 Cap 0603 10p 50v NPO+- 0.1 0 1 ea 26-Aug-03 TELMS6 C68 BOM for XMABP10 revision 00 5 35 - SMD To p Side 490 038-15100-10 Res 0603 10k 1/16w +-1% 0 1 ea 27-Aug-03 TELMS6 R4 500 038-16100-10 Res 0603 100k 1/16w +- 1% 0 1 ea 26-Aug-03 TELMS6 R12 510 220-01698-03 Pcb Dgtl Mcm TMA 0 1 ea 26-Aug-03 TELMS6 PCB 230 001-10054-02 Diode SMD BAT54AW SOT-323 0 1 ea 19-Jun-03 TELMS6 D1 250 002-10741-39 IC 74LCX139 2X2T04 DCdr Tosp16 0 1 ea 19-Jun-03 TELMS6 IC3 260 002-11020-15 IC Sram 32KX16 15ns Async Tsop 0 1 ea 19-Jun-03 TELMS6 IC9 270 002-20100-60 IC SMD EP1C6T144C8 Pld 144TQFP 0 1 ea 19-Jun-03 TELMS6 IC1 280 014-08100-30 Cap Tant SMD 100u 10v Loesr D 0 2 ea 19-Jun-03 TELMS6 C21, C8 310 018-15100-00 Cap 0603 10n 50v X7r +- 10% 0 1 ea 19-Jun-03 TELMS6 C56 320 018-16100-00 Cap 0603 100n 16vx7r+- 10% 0 17 ea 27-Aug-03 TELMS6 C1, C11, C13, C14, C15, C16, C18, C19, C2, C20, C3, C30, C40, C41, C42, C5, C6 340 038-13470-00 Res 0603 470e 1/16w +- 5% 0 1 ea 19-Jun-03 TELMS6 R22 350 038-14330-00 Res 0603 3k3 1/16w +-5% 0 1 ea 19-Jun-03 TELMS6 R11 370 038-15470-10 Res 0603 47k 1/16w+-1% 0 1 ea 19-Jun-03 TELMS6 R32 390 274-10023-00 Xtal 12.288MHz Hc- 49/Sm+-30ppm 0 1 ea 19-Jun-03 TELMS6 XL1 440 018-12470-10 Cap 0603 47p 50v NPO+- 0.1 0 4 ea 25-Jun-03 TELMS6 C69, C70, C71, C72 450 038-12220-00 Res 0603 22e 1/16w +-5% 0 1 ea 25-Jun-03 TELMS6 R1 520 002-10725-15 IC SMD TPS72515 1V5 LDO 1A Reg 0 1 ea 26-Aug-03 TELMS6 IC11 530 038-15100-10 Res 0603 10k 1/16w +-1% 0 2 ea 27-Aug-03 TELMS6 R2, R5 540 038-16100-10 Res 0603 100k 1/16w +- 1% 0 2 ea 26-Aug-03 TELMS6 R13, R25 36 - SMD Bottom Side Pos Item Description Len Qt y Units Effective Exp StdCost W/H Circuit References 10 252-00010-41 Mic Capsule Electret 2.7*6mm 0 1 ea 2-Sep-03 TELMR1 20 365-00011-38 Lbl Static Warning Yel 0 1 ea 2-Sep-03 TELMR1 30 369-01031-00 Rbbr Mic Upper A3M2751 T3K 0 1 ea 2-Sep-03 TELMR1 40 399-00010-53 Bag Plstc 150*250mm 0 1 ea 2-Sep-03 TELMR1 50 399-00010-86 Bag Static Shlding 127x203mm 0 1 ea 2-Sep-03 TELMR1 60 410-01162-00 Pkg Hdr Card Blank 0 1 ea 2-Sep-03 TELMR1 70 XMAA02-06 Pba Concealed & Dyn Mic 0 1 ea 2-Sep-03 TELMR1 80 240-10003-00 Hdr SMD 6w 2x3 Lo-Prof 2mm 0 1 ea 9-Sep-03 TELMR1 P3 90 240-10004-00 Hdr SMD 8w 2x4 Lo-Prof 2mm 0 1 ea 9-Sep-03 TELMR1 P2 BOM for TMAA02-06 revision 002 80 - Final Assembl y /Pac k TM8255 Control-Head Board PCB Information May 2004 © Tait Electronics Ltd This document can be printed on A3 as single-sided, double-sided, unfolded or z-folded. Ref Var IPN Description C1 018-13470-00 Cap 0603 470p 50v X7r+-10% C2 015-23270-05 Cap 0805 270p 1% 200v Grm40 C3 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C4 018-13100-00 Cap 0603 100p 50v NPO +-5% C5 018-13100-00 Cap 0603 100p 50v NPO +-5% C6 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C7 015-23270-05 Cap 0805 270p 1% 200v Grm40 C8 015-24100-05 Cap Cer 0805 1N 100V 5% COG C9 015-23270-05 Cap 0805 270p 1% 200v Grm40 C10 015-23270-05 Cap 0805 270p 1% 200v Grm40 C11 018-15100-00 Cap 0603 10n 50v X7r +-10% C12 018-13220-00 Cap 0603 220p 50v NPO+-5% C13 018-15270-00 Cap 0603 27n 50v X7r+-10% C14 014-08330-00 Cap Tant SMD 330u 10v Loesr E C101 018-15100-00 Cap 0603 10n 50v X7r +-10% C102 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C103 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C104 018-14100-00 Cap 0603 1n 50v X7r +-10% C105 018-14100-00 Cap 0603 1n 50v X7r +-10% C108 018-15100-00 Cap 0603 10n 50v X7r +-10% C109 018-13470-00 Cap 0603 470p 50v X7r+-10% C110 018-14100-00 Cap 0603 1n 50v X7r +-10% C201 015-27100-10 Cap Cer 0805 1m+80-20% Y5v 16v C202 015-07470-10 Cap Cer 1206 4u7 X7r 16v C204 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C205 015-06470-01 Cap Cer 1206 470n X7r 20% 50v C206 015-10047-00 Cap Cer SMD 4U7 50v X7R Grm55 C207 015-26100-08 Cap Cer 0805 100n 10% X7r 50v C210 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C302 018-13120-10 Cap 0603 120p 50v NPO+-1% C303 018-15100-00 Cap 0603 10n 50v X7r +-10% C304 018-12180-10 Cap 0603 18p 50v NPO +-1% C305 018-13120-10 Cap 0603 120p 50v NPO+-1% C307 018-13120-10 Cap 0603 120p 50v NPO+-1% C401 018-15100-00 Cap 0603 10n 50v X7r +-10% C402 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C403 018-14100-00 Cap 0603 1n 50v X7r +-10% C404 018-16100-01 Cap 0603 100n 16v Y5v +80-20% C405 018-14100-00 Cap 0603 1n 50v X7r +-10% C406 018-15100-00 Cap 0603 10n 50v X7r +-10% C407 018-15100-00 Cap 0603 10n 50v X7r +-10% C408 018-15100-00 Cap 0603 10n 50v X7r +-10% C409 018-15100-00 Cap 0603 10n …

Text truncated - open the document above for the full version.

Tun eup Issue 1 August 2004 TM8200 base station Tuneup info for compliance Tuneup 2 © Tait Electronics Ltd August 2004 Tait Contact Information Tait Radio Communicationshttp:// www.taitworld.com Corporate Head Office New Zealand Tait Electronics Ltd P.O. Box 1645 Christchurch New Zealand E-mail: [email protected] Website: http://www.taitworld.com Technical Support: E-mail: [email protected] Website: http://support.taitworld.com Tait North America Regional Head Office - United States of America Tait North America Inc. E-mail: [email protected] Canada Tait North America Inc. E-mail: [email protected] Latin America Tait Latin America E-mail: [email protected] Ta i t E u r o p e Regional Head Office - United Kingdom Tait Mobile Radio Ltd E-mail: [email protected] Tait North Asia Regional Head Office - Hong Kong Tait Mobile Radio (Hong Kong) Ltd E-mail: [email protected] Beijing Tait Mobile Radio (Hong Kong) Ltd E-mail: [email protected] Tait South Asia Regional Head Office - Singapore Tait Electronics (Far East) Pte Ltd E-mail: [email protected] Thailand Tait Mobile Radio Ltd E-mail: [email protected] Oceania New Zealand Tait Communications Ltd E-mail: [email protected] Australia Tait Electronics (Aust) Pty Ltd E-mail: [email protected] Note: For the addresses and phone numbers of the above regional offices refer to the Tait- World website. 3 Tuneup © Tait Electronics Ltd August 2004 Tuneup 4 © Tait Electronics Ltd August 2004 Preface Scope of Manual Welcome to the Tuneup information for compliance. This manual provides information on Tuneup for the TM8200 hardware. Enquiries and Comments If you have any enquiries regarding this manual, or any comments, suggestions and notifications of errors, please contact Technical Support (refer to “Tait Contact Information” on page 2). Updates of Manual and Equipment In the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Ltd reserves the right to update the equipment or this manual or both without prior notice. Copyright All information contained in this manual is the property of Tait Electronics Ltd. All rights are reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Electronics Ltd. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. Disclaimer There are no warranties extended or granted by this manual. Tait Electronics Ltd accepts no responsibility for damage arising from use of the information contained in the manual or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. 5 Tuneup © Tait Electronics Ltd August 2004 Typographical Conventions “File > Open” means “click File on the menu bar, then click Open on the list of commands that pops up”. Associated Documentation TM8200 Installation Guide. TM8200 Service Manual. TM8200 Specifications Manual. TM8200 Service Kit and Alarm Center User’s Manuals and online Help. TM8200 Calibration Kit User’s Manual and online Help. Technical notes are published from time to time to describe applications for Tait products, to provide technical details not included in manuals, and to offer solutions for any problems that arise. Updates may also be published on the Tait support website. Publication Record IssuePublication DateDescription 1August 2004 Tuneup 6 © Tait Electronics Ltd August 2004 Contents 1 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1.1 Equipment Set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 TOPA-SV-024 Test Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2.1 Test Equipment Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2.2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 TOP / TM8000 switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 TOP Mod Audio / Off / Mic Audio switch . . . . . . . . . . . . . . . . . . . . 26 Hook On / Hook Off switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Rx / Tx/PTT switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Speaker / Radio / Load switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 2.3 PCB Information (PCB IPN 220-01418-02A) . . . . . . . . . . . . . . . . . . . . . 28 Parts List (Rev. 4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 PCB Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Circuit Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Calibration basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Calibrating the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 NoteUsing the calibration application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Sliders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Option buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Instruction boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Radio Model toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 nSpecifications form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 2.Viewing calibration test results . . . . . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

REPORT 2007MPE FCC ID: CASTMAB1CPage 1 of 9 REPORT NUMBER 2007MPEFCC ID: CASTMAB1C TELTEST Laboratories Tait Electronics Limited PO Box 1645 558 Wairakei Road Christchurch New Zealand Phone : (64) (3) 3583399 Fax: (64) (3) 3580432 TEST: FCC 47 CFR 1.1310 Maximum Permissible Exposure ENVIRONMENTAL ASSESSMENT Mobile Transceiver Type TMAB1C ( TMAB22-B100 S/N: 19006577) In accordance with ANSI/IEEE Std C95.1, 1999 OET Bulletin 65 97-01 and Supplement C (Edition 01-01) DATE:May 2004 PREPARED BY:H. Newton__________________ Test Technician CHECKED & APPROVED BY:SA Crompton __________________ Laboratory Manager This document must not be reproduced except in full, without the written permission of the Compliance Laboratory Manager. REPORT 2007MPE FCC ID: CASTMAB1CPage 2 of 9 TABLE OF CONTENTS Page SUMMARY OF RESULTS ................................................................................................................... 3 OPERATING CONDITIONS AND EXPOSURE CONDITIONS .................................................... 4 LIMITS ................................................................................................................................................... 4 RECOMMENDED ANTENNAS .......................................................................................................... 4 MEASUREMENT GUIDANCE ...........................................................................................................4 TEST RESULTS, TRANSMITTER POWER ..................................................................................... 5 TEST RESULTS, MPE.......................................................................................................................... 6 TEST EQUIPMENT LIST .................................................................................................................... 8 INFORMATION TO BE PLACED IN MANUAL.............................................................................. 8 APPENDIX 1 TEST POSITIONS DIAGRAM.................................................................................... 9 REPORT 2007MPE FCC ID: CASTMAB1CPage 3 of 9 Summary of Results: Antenna GainAntenna PositionMeasurement PositionResult 2.15 dBi RoofExternal: Side COMPLIES 2.15 dBi TrunkExternal: Rear Side COMPLIES 2.15 dBi TrunkExternal: Rear Corner COMPLIES 2.15 dBi TrunkExternal: Centre rear COMPLIES 5.15 dBi RoofExternal: Side COMPLIES 5.15 dBi TrunkExternal: Rear Side COMPLIES 5.15 dBi TrunkExternal: Rear Corner COMPLIES 5.15 dBi TrunkExternal: Centre rear COMPLIES 2.15 dBi RoofInternal: Front Seat COMPLIES 2.15 dBi RoofInternal: Back Seat COMPLIES 2.15 dBi TrunkInternal: Front Seat COMPLIES 2.15 dBi TrunkInternal: Back Seat COMPLIES 5.15 dBi RoofInternal: Front Seat COMPLIES 5.15 dBi RoofInternal: Back Seat COMPLIES 5.15 dBi TrunkInternal: Front Seat COMPLIES 5.15 dBi TrunkInternal: Back Seat COMPLIES See Appendix A for details of the measurement positions. REPORT 2007MPE FCC ID: CASTMAB1CPage 4 of 9 Operating and Exposure conditions: Operating Conditions:Mobile transmitter using vehicle mounted antennas only Exposure conditions:Occupational/Controlled Exposure (operator). General Population/Uncontrolled (passengers and bystanders) Safe Distance: Recommended Minimum lateral safe distance from the antenna:90 cm Limit: Occupational/Controlled Exposure: 30 - 300 MHz: 1.0 mW/cm 2 300 – 1500 MHz:F/300 mW/cm 2 General population/Uncontrolled Exposure: 30 - 300 MHz: 0.2 mW/cm 2 300 – 1500 MHz:F/1500 mW/cm 2 Recommended Antennas: Antenna Type:Monopole (λ/4 antenna) Antenna Gain:2.15 dBi Antenna Type:Monopole (5λ/8 antenna) Antenna Gain:5.15 dBi Measurement Guidance: 2) Mobile PTT – Parts 80, 90 a) §2.1033(c)(3) requires device operating and installation instructions to be submitted during equipment certification; instructions should include the minimum separation distance and other constraints required for the device and its antenna(s) to meet MPE limits b) Per definition of a mobile device a minimum separation distance of 20 cm is required REPORT 2007MPE FCC ID: CASTMAB1CPage 5 of 9 i) Antenna installation conditions should maintain the estimated minimum MPE separation distance ii) A separation distance based on MPE evaluation (measurement or computer modelling) that is smaller than the estimated MPE distance may be used if it is applicable for the antenna installation conditions c) Basic RF exposure instructions are requested for devices that meet general population exposure requirements, as part of the §2.1033(c)(3) required operating instructions; RF exposure training instructions and labelling info are requested for devices that satisfy occupational exposure requirements Federal Communications Commission OET Laboratory Division March 18, 2004 Test Results: NAME OF TEST:TRANSMITTER OUTPUT POWER (CONDUCTED) TEST CONDITIONS:Ambient Temperature22.5 o C Relative Humidity51 % SPECIFICATION:FCC 47 CFR 2.1046 GUIDE:TIA/EIA-603 2.2.1 MEASUREMENT PROCEDURE: 1. The Equipment Under Test (EUT) was connected to a RF Power meter using a coaxial attenuator with an impedance of 50 Ohms. 2. The unmodulated output power was measured. MEASUREMENT RESULTS: Transmit Frequency:157.65MHz Manufacturer’s Rated Output Power25Watts Supply Voltage, motor idling, transmitting.13.8Volts Measured Output Power28.0Watts Measurement Uncertainty (dB) ± 0.5 dB Maximum Transmit Power is set in the factory to 26 watts +2 / -1 watt. This setting is not adjustable by the user. The MPE results are scaled to simulate results from a 28 watt carrier with a 50% duty cycle. REPORT 2007MPE FCC ID: CASTMAB1CPage 6 of 9 NAME OF TEST:ENVIRONMENTAL ASSESSMENT SPECIFICATION:FCC 47 CFR 1.1310 Measurement Method: Field strength measurements were performed for two antenna positions on a representative vehicle (Honda Accord 2001 LXI four door sedan, dimensions 185.5 long, 71.5 wide and 57.1 inches high ). See Appendix A for details. External Field strength readings were recorded at four positions 20 cm’s fr…

Text truncated - open the document above for the full version.

TELTEST Laboratories Tait Electronics Limited Report Number 2007 FCC ID: CASTMAB1C Page 1 of 35 REPORT NUMBER 2007MAY 2004 RADIO PERFORMANCE MEASUREMENTS On the TMAB22-B100Mobile Transceiver FCC ID: CASTMAB1C SN: 19007605 In accordance with FCC 47 CFR Parts 22 and 90 PREPARED BY:Garry Pringle___________________ Test Technician CHECKED & APPROVED BY:SA Crompton___________________ Laboratory Manager TELTEST Laboratories Tait Electronics Limited PO Box 1645 558 Wairakei Road Christchurch New Zealand Phone : (64) (3) 3583399 Fax: (64) (3) 3580432 TELTEST Laboratories Tait Electronics Limited Report Number 2007 FCC ID: CASTMAB1C Page 2 of 35 REPORT ON : Type Approval Testing of the TMAB22-B100 (Serial No 19007605 ) in accordance with: FCC CFR 47 Parts 22 & 90 Report No 2007 FCC ID: CASTMAB1C PREPARED FOR : Tait Electronics Ltd PO Box 1645 558 Wairakei Rd Christchurch New Zealand DISTRIBUTION : TELTest LaboratoryMr S CromptonCopy No 1 Tait Electronics LtdMr. Des Fox Copy No 2 Tait Electronics LtdMr. Neil FletcherCopy No 3 APPROVED : S. A. Crompton Compliance Laboratory Manager Date : All tests reported herein have been performed in accordance with the laboratory's scope of accreditation This document must not be reproduced except in full, without the written permission of the Compliance Laboratory Manager. Copy No: TELTEST Laboratories Tait Electronics Limited Report Number 2007 FCC ID: CASTMAB1C Page 3 of 35 TABLE OF CONTENTS DECLARATION OF CONFORMITY................................................................................................. 4 ENVIRONMENTAL CONDITIONS ................................................................................................... 5 NECESSARY BANDWIDTH AND EMISSION DESIGNATORS ................................................... 5 TEST RESULTS..................................................................................................................................... 7 TRANSMITTER OUTPUT POWER (CONDUCTED) ...................................................................... 7 TRANSMITTER AUDIO FREQUENCY RESPONSE - PRE-EMPHASIS ....................................... 8 TRANSMITTER MODULATION LIMITING ................................................................................. 10 OCCUPIED BANDWIDTH ..............................................................................................................13 SPURIOUS EMISSIONS (CONDUCTED)....................................................................................... 22 SPURIOUS EMISSIONS (RADIATED)........................................................................................... 25 Refer EMC Technologies Report 40534.2 dated 4 June 2004 ........................................................ 25 TRANSMITTER FREQUENCY STABILITY (TEMPERATURE) ................................................. 26 TRANSMITTER FREQUENCY STABILITY (VOLTAGE) ........................................................... 28 TRANSIENT FREQUENCY BEHAVIOR ....................................................................................... 29 TEST EQUIPMENT USED................................................................................................................. 34 APPENDIX A ....................................................................................................................................... 35 TEST SETUP DETAILS.................................................................................................................... 35 TELTEST Laboratories Tait Electronics Limited Report Number 2007 FCC ID: CASTMAB1C Page 4 of 35 DECLARATION OF CONFORMITY We, TELTEST LABORATORIES of 558 Wairakei Road, Christchurch New Zealand, declare under our sole responsibility that the product: Equipment:Mobile Transceiver Type:TMAB1C Product code:TMAB22-B100 Serial Numbers:19007605 Quantity:1 To which this declaration relates is in conformity with the following standards: FCC CFR 47 Parts 22 & 90 Signature:__________________________ S. A. Crompton Compliance Laboratory Manager. Date:__________ TELTEST Laboratories Tait Electronics Limited Report Number 2007 FCC ID: CASTMAB1C Page 5 of 35 Environmental Conditions All testing was performed at the following conditions. Ambient Temperature15 o C to 30 o C Relative Humidity20% to 75% Necessary Bandwidth and Emission Designators SPECIFICATION:FCC 47 CFR 2.202 The Necessary Bandwidth is the minimum value of the occupied bandwidth sufficient to ensure the transmission of information at the rate and with the quality required for the system employed. This is calculated using the following formula. Bn = 2M + 2DKWhere: Bn = Necessary Bandwidth M = Maximum modul…

Text truncated - open the document above for the full version.