CASTMAD1AMobile Transceiver

TM8000mobiles TM8100 Mobile Radio Service Manual MM8100-02-00-812 Version 1.01 October 2003 © Tait Electronics Limited 2TM8100 Mobile Radio Service Manual October 2003 © Tait Electronics Limited Contact Information Tait Radio Communicationshttp://www.taitworld.com Corporate Head Office New Zealand Tait Electronics Ltd P.O. Box 1645 Christchurch New Zealand E-mail: [email protected] Website: http://www.taitworld.com Technical Support: E-mail: [email protected] Website: http://support.taitworld.com Tait North America Regional Head Office: United States of America Tait North America Inc E-mail: [email protected] Canada Tait North America Inc E-mail: [email protected] Latin America Tait Latin America E-mail: [email protected] Tait Europe Regional Head Office: United Kingdom Tait Mobile Radio Ltd E-mail: [email protected] Tait North Asia Regional Head Office: Hong Kong Tait Mobile Radio (Hong Kong) Ltd E-mail: [email protected] Beijing Tait Mobile Radio (Hong Kong) Ltd E-mail: [email protected] Tait South Asia Regional Head Office: Singapore Tait Electronics (Far East) Pte Ltd E-mail: [email protected] Thailand Tait Mobile Radio Ltd E-mail: [email protected] Tait Oceania New Zealand Tait Communications Ltd E-mail: [email protected] Australia Tait Electronics (Aust) Pty Ltd E-mail: [email protected] Note For the addresses and telephone numbers of the above regional offices refer to the TaitWorld website. TM8100 Mobile Radio Service Manual3 October 2003 © Tait Electronics Limited Tait General Software Licence Agreement This legal document is an Agreement between you (the “Licensee”) and Tait Electronics Limited (“Tait”). By using any of the Software or Firmware items prior-installed in the related Tait product, included on this CD or downloaded from the Tait website, (hereinafter referred to as “the Software or Firmware”) you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install and use any of the Software or Firmware. If you install and use any of the Software or Firmware that will be deemed to be acceptance of the terms of this licence agreement. The terms of this agreement shall apply subject only to any express written terms of agreement to the contrary between Tait and the Licensee. Licence TAIT GRANTS TO YOU AS LICENSEE THE NON- EXCLUSIVE RIGHT TO USE THE SOFTWARE OR FIRMWARE ON A SINGLE MACHINE PROVIDED YOU MAY ONLY : 1.COPY THE SOFTWARE OR FIRMWARE INTO ANY MACHINE READABLE OR PRINTED FORM FOR BACKUP PURPOSES IN SUPPORT OF YOUR USE OF THE PROGRAM ON THE SINGLE MACHINE (CERTAIN PROGRAMS ,HOWEVER,MAY INCLUDE MECHANISMS TO LIMIT OR INHIBIT COPYING ,THEY ARE MARKED “ COPY PROTECTED”),PROVIDED THE COPYRIGHT NOTICE MUST BE REPRODUCED AND INCLUDED ON ANY SUCH COPY OF THE SOFTWARE OR FIRMWARE ; AND / OR 2.MERGE IT INTO ANOTHER PROGRAM FOR YOUR USE ON THE SINGLE MACHINE (ANY PORTION OF ANY SOFTWARE OR FIRMWARE MERGED INTO ANOTHER PROGRAM WILL CONTINUE TO BE SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT ). THE LICENSEE MAY NOT DUPLICATE,MODIFY, REVERSE COMPILE OR REVERSE ASSEMBLE ANY SOFTWARE OR FIRMWARE IN WHOLE OR PART . Title to Software THIS AGREEMENT DOES NOT CONSTITUTE A CONTRACT OF SALE IN RELATION TO THE SOFTWARE OR FIRMWARE SUPPLIED TO THE LICENSEE .NOT WITHSTANDING THE LICENSEE MAY OWN THE MAGNETIC OR OTHER PHYSICAL MEDIA ON WHICH THE SOFTWARE OR FIRMWARE WAS ORIGINALLY SUPPLIED ,OR HAS SUBSEQUENTLY BEEN RECORDED OR FIXED ,IT IS A FUNDAMENTAL TERM OF THIS AGREEMENT THAT AT ALL TIMES TITLE AND OWNERSHIP OF THE SOFTWARE OR FIRMWARE ,WHETHER ON THE ORIGINAL MEDIA OR OTHERWISE ,SHALL REMAIN VESTED IN TAIT OR THIRD PARTIES WHO HAVE GRANTED LICENCES TO TAIT . Term and Termination THIS LICENCE SHALL BE EFFECTIVE UNTIL TERMINATED IN ACCORDANCE WITH THE PROVISIONS OF THIS AGREEMENT .THE LICENSEE MAY TERMINATE THIS LICENCE AT ANY TIME BY DESTROYING ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCIATED WRITTEN MATERIALS . THIS LICENCE WILL BE TERMINATED AUTOMATICALLY AND WITHOUT NOTICE FROM TAIT IN THE EVENT THAT THE LICENSEE FAILS TO COMPLY WITH ANY TERM OR CONDITION OF THIS AGREEMENT .THE LICENSEE AGREES TO DESTROY ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCIATED WRITTEN MATERIALS IN THE EVENT OF SUCH TERMINATION . Limited Warranty THE SOFTWARE OR FIRMWARE IS SUPPLIED BY TAIT AND ACCEPTED BY THE LICENSEE “AS IS”WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED ,INCLUDING BUT NOT BEING LIMITED TO ANY IMPLIED WARRANTIES AS TO MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE .THE LICENSEE ACKNOWLEDGES THAT THE SOFTWARE OR FIRMWARE IS USED BY IT IN BUSINESS AND ACCORDINGLY TO THE MAXIMUM EXTENT PERMITTED BY LAW NO TERMS OR WARRANTIES WHICH ARE IMPLIED BY LEGISLATION SHALL APPLY TO THIS AGREEMENT .TAIT DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE OR FIRMWARE WILL MEET THE LICENSEE ’S REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE OR FIRMWARE WILL BE UNINTERRUPTED OR ERROR -FREE. 4TM8100 Mobile Radio Service Manual October 2003 © Tait Electronics Limited Exclusion of Liability TAIT’S ENTIRE LIABILITY AND THE LICENSEE’S EXCLUSIVE REMEDY SHALL BE THE FOLLOWING : 1.IN NO CIRCUMSTANCES SHALL TAIT BE UNDER ANY LIABILITY TO THE LICENSEE ,OR ANY OTHER PERSON WHATSOEVER ,FOR ANY DIRECT OR CON- SEQUENTIAL DAMAGE ARISING OUT OF OR IN CON- NECTION WITH ANY USE OR INABILITY OF USING THE SOFTWARE OR FIRMWARE . 2.TAIT WARRANTS THE OPERATION OF THE SOFTWARE OR FIRMWARE ONLY WITH THE OPERATING SYSTEM FOR WHICH IT WAS DESIGNED . USE OF THE SOFTWARE OR FIRMWARE WITH AN OPERATING SYSTEM OTHER THAN THAT FOR WHICH IT WAS DESIGNED MAY NOT BE SUPPORTED BY TAIT ,UNLESS OTHERWISE EXPRESSLY AGREED BY TAIT . General THE LICENSEE CONFIRMS THAT IT SHALL COMPLY WITH THE PROVISIONS OF LAW IN RELATION TO THE SOFTWARE OR FIRMWARE . Law and Jurisdiction THIS AGREEMENT SHALL BE SUBJECT TO AND CONSTRUED IN ACCORDANCE WITH NEW ZEALAND LAW AND DISPUTES BETWEEN THE PARTIES CONCERN…

Text truncated - open the document above for the full version.

© Tait Electronics Ltd May 2003About this Guide1 About this Guide This user’s guide provides information about both TM8105 and TM8115 mobile radios and is divided into two parts.
Part A explains how the TM8115 radio operates. The TM8105 radio has a control head without user con- trols, so no TM8105 operating information is needed.
Part B outlines the installation procedure for both TM8105 and TM8115 radios, and gives the interface specifications for the TM8105 remote connector. Important Safety Information This user’s guide also contains important safety informa- tion about using and installing TM8105 and TM8115 radios. Refer to page 6 for user safety instructions and page 18 for installation safety instructions. Updating this Guide In the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Ltd reserves the right to update both the equipment or this user’s guide, without prior notice. 2About this Guide Your Radio’s Settings Use the following table to list your radio’s programmed settings. Channel List Function Key Settings IDDescriptionIDDescription Radio Operation5 Part 1: Radio Operation About this Guide ...........................................................................1 Important Safety Information ....................................................................... 1 Updating this Guide .................................................................................... 1 Safety Warnings ...........................................................................6 Warning: Safe Operation ....................................................................... 6 Warning: High Temperatures ................................................................. 6 Warning: FCC RF Exposure Limits ..........................................................6 Caution: Radio Protection ...................................................................... 7 Getting Started .............................................................................8 Radio Controls ............................................................................................ 8 Radio Indicators ........................................................................................ 10 LED Indicators ..................................................................................... 10 Audible Indicators ............................................................................... 10 Basic Operation ...........................................................................11 Turning the Radio On and Off .................................................................... 11 Adjusting the Volume ................................................................................ 11 Selecting a Channel .................................................................................. 11 Making a Call ........................................................................................... 11 Transmit Timer .................................................................................... 12 Receiving a Call ........................................................................................ 12 What You Hear on a Channel .................................................................... 12 Signalling Mute ................................................................................... 12 Squelch ............................................................................................... 13 Monitor .................................................................................................... 13 Activating Monitor .............................................................................. 13 Activating Squelch Override ................................................................. 13 Scanning ................................................................................................... 14 Activating Scanning ............................................................................ 14 Nuisance Delete .................................................................................. 14 Priority Scanning ................................................................................. 14 Troubleshooting .........................................................................15 Removing the Radio from the Vehicle ........................................................ 15 Notes ............................................................................................16 6Safety Warnings Safety Warnings Warning: Safe Operation
Switch the radio off at petrol filling stations or near flammable liquids or gases.
Switch the radio off in the vicinity of explo- sive devices and blasting zones.
Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area. Warning: High Temperatures The bottom surface of the radio and the heatsink fins can become hot during prolonged operation. Do not touch these parts of the radio. Warning: FCC RF Exposure Limits This product generates RF (radio frequency) energy during transmissions. This device must be restricted to work-related use in an occupational/controlled expo- sure environment. The radio operator must have control of the exposure conditions and duration of all persons exposed to the antenna of this transmitter to satisfy FCC RF exposure compliance. This device is not approved for general population use.
This device must only be used with authorized acces- sories and antennas.
The operator must ensure that the minimum safe dis- tance of 0.9 m (35 inches) between persons and the antenna is maintained during transmissions. Safety Warnings7
This minimum safe distance is based on the assump- tion that there is a duty cycle of 50% transmit mode to stand-by or receive modes. The radio is in transmit mode when the PTT (press-to-talk) key on the micro- phone is pressed and th…

Text truncated - open the document above for the full version.

TELTEST Laboratories Tait Electronics Ltd PO Box 1645 558 Wairakei Road Christchurch New Zealand Phone: 64 – 3 – 358 1026 Fax: 64 – 3 – 358 3903 2nd March 2004 To Whom It May Concern: TMAD1A Mobile Transceiver This equipment meets the requirements of FCC Rules Part 90.203(e) and (g) as applicable. Programming of this product’s transmit frequencies can be performed ONLY by the manufacturer or by service or maintenance personnel. The operator cannot program transmit frequencies using the equipment’s external operation controls. Yours faithfully, Garry Pringle (Compliance Laboratory Technician)

TM8000 Programming Application User’s Manual 2ND DRAFT1 Part A: Getting started ......................................................................................9 Reading and programming your radio ....................................................... 11 Reading a radio .................................................................................... 11 Opening a database file ......................................................................... 11 Creating a new database file .................................................................. 11 Saving a database file ............................................................................. 12 Programming a radio ............................................................................ 12 Using the programming application ........................................................... 13 Navigating between forms .................................................................... 13 Changing access levels .......................................................................... 13 Changing the application language ........................................................ 13 Changing application start-up options ................................................... 14 Shortcut keys ........................................................................................ 14 Changing data ............................................................................................ 15 Text box .............................................................................................. 15 Drop-down box ................................................................................... 15 Check box ............................................................................................ 16 Grids .................................................................................................... 16 Transferring data ........................................................................................ 17 Creating templates ................................................................................ 17 Copying data to grids ............................................................................ 17 Copying rows within a grid .................................................................. 18 Copying individual fields ...................................................................... 18 Menu commands ....................................................................................... 20 File menu ............................................................................................. 20 Edit menu ............................................................................................ 21 Radio menu ......................................................................................... 22 Network menu ..................................................................................... 23 Tools menu .......................................................................................... 23 Help menu ........................................................................................... 24 Part B: Getting and using help .......................................................................25 Using What's This? Help ........................................................................... 27 Accessing information in the help file ......................................................... 28 Getting help on the Internet ...................................................................... 29 Part C: Programming conventional features .................................................31 Basic radio settings ..................................................................................... 33 About audible indicators ....................................................................... 33 Enabling all audible indicators .......................................................... 33 Setting the volume of audible indicators .......................................... 34 Permanently disabling individual audible indicators .......................... 34 Configuring the LCD backlight ............................................................ 34 Setting low power conditions ............................................................... 35 Setting how the radio starts ................................................................... 35 About PTT Inhibit ............................................................................... 36 Setting what happens when the PTT is keyed ....................................... 36 Setting an external alert ......................................................................... 37 Transmit, receive and monitor ................................................................... 39 About mutes ......................................................................................... 39 Restricting the transmit time and setting a lockout ................................ 39 Setting when the radio can transmit (Transmit Inhibit) .......................... 40 Bypassing repeaters (repeater talkaround) .............................................. 40 22ND DRAFT © Tait Electronics Ltd 2003 About monitor ..................................................................................... 40 Using monitor with subaudible signalling ............................................. 40 Using monitor with a closed selective system ....................................... 41 Setting how monitor is opened ............................................................ 41 Opening and closing monitor via a keypress .................................... 42 Opening and closing monitor via the hookswitch ........................... 42 Opening monitor via a press of the PTT ......................................... 42 Opening monitor when sending a selective call ............................... 42 Opening monitor when receiving a selective call ............................. 43 Setting how …

Text truncated - open the document above for the full version.

Pos ItemDescriptionLen Qty Units Effective Exp 10XMAB12-D100216-266M PCA01ea25-Jul-03 20XMABM00Rad Body Mech Std01ea25-Jul-03 30410-01184-01Pkg Box Radio 210X210X70 TMA01ea25-Jul-03 40410-01185-01Pkg Ins Radio Body TMA01ea25-Jul-03 50428-00002-01S/W Licence Agreement Eng01ea25-Jul-03 70MM8100-00-03-804 U/Gde TM8105/8115 Eng/Fre/SAsp 01ea21-Aug-03 80FAT-MAB12-D100-1 TMA1 D1 Test Spec00ea27-Sep-03 BOM for TMAB12-D100 revision 003 65 - Carcassing 80 - Final Assembly/Pack StdCost Curr W/HCircuit References NZD TELMR2 NZD TELMR2 NZD TELMR2 NZD TELMR2 NZD TELMR2 NZD TELMR2 NZD TELMR2

FCC ID: CASTMAD1APage 1 of 9 SUPPLEMENTARY REPORT NUMBER 1985MPEFCC ID: CASTMAD1A TEST: FCC 47 CFR 1.1310 Maximum Permissible Exposure ENVIRONMENTAL ASSESSMENT On the TMAB12-D100 Mobile Transceiver S/N: 19005533 In accordance with ANSI/IEEE Std C95.1, 1999 OET Bulletin 65 97-01 DATE:February 2004 PREPARED BY:M. Ludwig___________________ Test Technician CHECKED & APPROVED BY:SA Crompton___________________ Laboratory Manager TELTEST Laboratories Tait Electronics Limited PO Box 1645 558 Wairakei Road Christchurch New Zealand Phone : (64) (3) 3583399 Fax: (64) (3) 3580432 FCC ID: CASTMAD1APage 2 of 9 REPORT ON : Type Approval Testing of the TMAB12-D100 (Serial No 19005533 ) in accordance with: ANSI/IEEE Std C95.1, 1999 OET Bulletin 65 97-01 Report No 1985MPE FCC ID: CASTMAD1A PREPARED FOR : Tait Electronics Ltd PO Box 1645 558 Wairakei Rd Christchurch New Zealand DISTRIBUTION : TELTest LaboratoryMr S CromptonCopy No 1 Tait Electronics LtdMr. Des Fox Copy No 2 Tait Electronics LtdMr. Dave Wright Copy No 3 APPROVED : S. A. Crompton Compliance Laboratory Manager Date : All tests reported herein have been performed in accordance with the laboratory's scope of accreditation This document must not be reproduced except in full, without the written permission of the Compliance Laboratory Manager. Copy No: FCC ID: CASTMAD1APage 3 of 9 TABLE OF CONTENTS PAGE Contents: 3 Operating Conditions and Exposure conditions, Minimum Safe Distance calculations. 4 Test results, Transmitter Power. 5 Test results, MPE, Average power calculations. 6 Information to be placed in Manual 7 FCC ID: CASTMAD1APage 4 of 9 Operating and Exposure conditions: Operating Conditions:Mobile transmitter using vehicle mounted antennas only Exposure conditions:Occupational/Controlled Exposure. Minimum Safe Distance calculations: R = ( P G / 4 π S ) 1/2 Where S = power density in mW per cm 2 P = net power input to the antenna in mW R = distance from the antenna in cm G = linear gain of antenna relative to an isotropic radiator Antenna Type:Monopole (λ/4 whip) Antenna Gain:2.15 dBi Transmitter Power:28.4 Watts Limit:30 - 300 MHz: 1.0 mW/cm 2 Power gain product:28400 x 1.64 = 46576 mW Minimum safe distance:(46576 / 4π x 1.0) 1/2 = 61 cm Antenna Type:Monopole (5λ/8 whip) Antenna Gain:5.15 dBi Transmitter Power:28.4 Watts Limit:30 - 300 MHz: 1.0 mW/cm 2 Power gain product:28400 x 3.27 = 92868 mW Minimum safe distance:(92868 / 4π x 1.0) 1/2 = 86 cm FCC ID: CASTMAD1APage 5 of 9 Test Results: NAME OF TEST:TRANSMITTER OUTPUT POWER (CONDUCTED) TEST CONDITIONS:Ambient Temperature23 o C Relative Humidity49 % Standard Voltage13.8V DC SPECIFICATION:FCC 47 CFR 2.1046 GUIDE:TIA/EIA-603 2.2.1 MEASUREMENT PROCEDURE: 1. The Equipment Under Test (EUT) was connected to an RF Power meter using a coaxial attenuator with an impedance of 50 Ohms. 2. The unmodulated output power was measured. MEASUREMENT RESULTS: Frequency: 219.1 MHzManufacturer’s Rated Output Power: 25 W nominal POWER (W)28.4 Measurement Uncertainty (dB) +0.63, -0.68 NAME OF TEST:ENVIRONMENTAL ASSESSMENT TEST CONDITIONS:Ambient Temperature23 o C Relative Humidity49% Standard Voltage13.8V DC SPECIFICATION:FCC 47 CFR 1.1310 GUIDE:ANSI/IEEE Std C95.1, 1999, OET Bulletin 65 97-01 Test Method: The antenna is mounted on a metallic ground-plane which is placed on a non metallic turntable 1.35 m high and clear of nearby objects. Peak power density readings are taken at 0.2m vertical increments using a calibrated isotropic probe at the calculated safe distance from the antenna. The measurement equipment is operated remotely using fibre optics to reduce field perturbations. FCC ID: CASTMAD1APage 6 of 9 Test Distance metres 0.61 m (distance for λ/4 whip)0.86 m (distance for 5λ/8 whip) Power Density, mW/cm 2 Power Density, mW/cm 2 Probe Height metres Result for 28.4W TX power.Result for 28.4W TX power. 0.2 0.0530.006 0.4 0.0370.020 0.6 0.0900.046 0.8 0.2920.074 1.0 0.4630.109 1.2 0.6050.132 1.4 0.7560.205 1.6 0.7740.297 1.8 0.5530.359 2.0 0.3260.465 Calculations of average power (sum of results/number of results): Test Distance, m 0.61 m (distance for λ/4 whip) 0.86 m (distance for 5λ/8 whip) Body partAverage Power Density, mW/cm 2 Average Power Density, mW/cm 2 Whole Body Probe Height 0.2 to 2.0m 0.1970.086 Upper Body Probe Height 1.0 to 2.0m 0.2480.112 Lower Body Probe Height 0.2 to 0.8m 0.0590.018 Limit, Occupational/Controlled Exposure: 30 - 300 MHz: 1.0 mW/cm 2 Test Equipment Used: Power Head:HP11722A s/n 2320A00688 Modulation An.:HP8901B (OPT 002)s/n 3704A05837 Isotropic ProbeHoladay HI-422 s/n 95661 Antenna MastTait TurntableTait FCC ID: CASTMAD1APage 7 of 9 Information to be placed in User/Installation manual: Warning: Warning: RF Exposure Hazard To comply with FCC RF exposure limits, this product must be installed using an externally mounted antenna with either a 2.15dBi or 5.15dBi gain. This antenna must not be mounted at a location such that any person or persons can come closer than 0.9m (35 inches) to the antenna. Safety Training Information: Warning: FCC RF Exposure Limits This product generates RF (radio frequency) energy during transmissions. This device must be restricted to work-related use in an occupational/controlled exposure environment. The radio operator must have control of the exposure conditions and duration of all persons exposed to the antenna of this transmitter to satisfy FCC RF exposure compliance. • This device is not approved for general population use. • This device must only be used with authorized accessories and antennas. The operator must ensure that the minimum safe distance of 0.9m (35 inches) between persons and the antenna is maintained during transmissions. This minimum safe distance is based on the assumption that there is a duty cycle of 50% transmit mode to stand-by or receive modes. The radio is in transmit mode when the PTT (press-to- talk) key on the microphone is pressed and the control head red LED (light emitting diode) glows. Please refer to the foll…

Text truncated - open the document above for the full version.

FCC ID: CASTMAD1APage 1 of 8 SUPPLEMENTARY REPORT NUMBER 1985MPE-A FCC ID: CASTMAD1A TELTEST Laboratories Tait Electronics Limited PO Box 1645 558 Wairakei Road Christchurch New Zealand Phone : (64) (3) 3583399 Fax: (64) (3) 3580432 TEST: FCC 47 CFR 1.1310 Maximum Permissible Exposure ENVIRONMENTAL ASSESSMENT On the TMAB12-D100 Mobile Transceiver S/N: 19005533 In accordance with ANSI/IEEE Std C95.1, 1999 OET Bulletin 65 97-01 and Supplement C (Edition 01-01) DATE:May 2004 PREPARED BY:M. Ludwig__________________ Test Technician CHECKED & APPROVED BY:SA Crompton __________________ Laboratory Manager This document must not be reproduced except in full, without the written permission of the Compliance Laboratory Manager. FCC ID: CASTMAD1APage 2 of 8 TABLE OF CONTENTS PAGE Summary of Results2 Operating Conditions and Exposure conditions3 Limits3 Recommended Antennas3 Measurement Guidance 3 Test results, Transmitter Power. 4 Test results, MPE 5 Test Equipment List 6 Information to be placed in Manual 7 Appendix 1 Test positions diagram Summary of Results: Antenna GainAntenna PositionMeasurement PositionResult 2.15 dBi RoofExternal: Side COMPLIES 2.15 dBi TrunkExternal: Rear Side COMPLIES 2.15 dBi TrunkExternal: Rear Corner COMPLIES 2.15 dBi TrunkExternal: Centre rear COMPLIES 5.15 dBi RoofExternal: Side COMPLIES 5.15 dBi TrunkExternal: Rear Side COMPLIES 5.15 dBi TrunkExternal: Rear Corner COMPLIES 5.15 dBi TrunkExternal: Centre rear COMPLIES 2.15 dBi RoofInternal: Front Seat COMPLIES 2.15 dBi RoofInternal: Back Seat COMPLIES 2.15 dBi TrunkInternal: Front Seat COMPLIES 2.15 dBi TrunkInternal: Back Seat COMPLIES 5.15 dBi RoofInternal: Front Seat COMPLIES 5.15 dBi RoofInternal: Back Seat COMPLIES 5.15 dBi TrunkInternal: Front Seat COMPLIES 5.15 dBi TrunkInternal: Back Seat COMPLIES See Appendix A for details of the measurement positions. FCC ID: CASTMAD1APage 3 of 8 Operating and Exposure conditions: Operating Conditions:Mobile transmitter using vehicle mounted antennas only Exposure conditions:Occupational/Controlled Exposure (operator). General Population/Uncontrolled (passengers and bystanders) Safe Distance: Recommended Minimum lateral safe distance from the antenna:90 cm Limit: Occupational/Controlled Exposure: 30 - 300 MHz: 1.0 mW/cm 2 General population/Uncontrolled Exposure: 30 - 300 MHz: 0.2 mW/cm 2 Recommended Antennas: Antenna Type:Monopole (λ/4 antenna) Antenna Gain:2.15 dBi Antenna Type:Monopole (5λ/8 antenna) Antenna Gain:5.15 dBi Measurement Guidance: 2) Mobile PTT – Parts 80, 90 a) §2.1033(c)(3) requires device operating and installation instructions to be submitted during equipment certification; instructions should include the minimum separation distance and other constraints required for the device and its antenna(s) to meet MPE limits b) Per definition of a mobile device a minimum separation distance of 20 cm is required i) Antenna installation conditions should maintain the estimated minimum MPE separation distance FCC ID: CASTMAD1APage 4 of 8 ii) A separation distance based on MPE evaluation (measurement or computer modeling) that is smaller than the estimated MPE distance may be used if it is applicable for the antenna installation conditions c) Basic RF exposure instructions are requested for devices that meet general population exposure requirements, as part of the §2.1033(c)(3) required operating instructions; RF exposure training instructions and labeling info are requested for devices that satisfy occupational exposure requirements Federal Communications Commission OET Laboratory Division March 18, 2004 Test Results: NAME OF TEST:TRANSMITTER OUTPUT POWER (CONDUCTED) TEST CONDITIONS:Ambient Temperature23 o C Relative Humidity49 % SPECIFICATION:FCC 47 CFR 2.1046 GUIDE:TIA/EIA-603 2.2.1 MEASUREMENT PROCEDURE: 1. The Equipment Under Test (EUT) was connected to an RF Power meter using a coaxial attenuator with an impedance of 50 Ohms. 2. The unmodulated output power was measured. MEASUREMENT RESULTS: Transmit Frequency:219.1MHz Manufacturer’s Rated Output Power25Watts Supply Voltage, motor idling, transmitting.14Volts Measured Output Power26.6Watts Measurement Uncertainty (dB) ± 0.5 dB Maximum Transmit Power is set in the factory to 26 watts +2 / -1 watt. This setting is not adjustable by the user. The MPE results are scaled to simulate results from a 28 watt carrier with a 50% duty cycle. NAME OF TEST:ENVIRONMENTAL ASSESSMENT SPECIFICATION:FCC 47 CFR 1.1310 Measurement Method: Field strength measurements were performed for two antenna positions on a representative vehicle (Honda Accord 2001 LXI four door sedan, dimensions 185.5 long, 71.5 wide and 57.1 inches high ). See Appendix A for details. FCC ID: CASTMAD1APage 5 of 8 External Field strength readings were recorded at four positions 20 cms from the car body, …

Text truncated - open the document above for the full version.