CB262932Automotive Electronics Infotainment Head Unit with Bluetooth and WLAN

Mazda3_8CX9-EA-13F_Edition1.indb 1Mazda3_8CX9-EA-13F_Edition1.indb 12013/05/17 11:47:472013/05/17 11:47:47 Mazda3_8CX9-EA-13F_Edition1.indb 2Mazda3_8CX9-EA-13F_Edition1.indb 22013/05/17 11:48:202013/05/17 11:48:20 A Word to Mazda Owners Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind. To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommendations. An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is necessary, that's the place to go. Our nationwide network of Mazda professionals is dedicated to providing you with the best possible service. We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure and in your full satisfaction with your Mazda product. Mazda Motor Corporation HIROSHIMA, JAPAN Important Notes About This Manual Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you resell the vehicle, leave this manual with it for the next owner. All specifi cations and descriptions are accurate at the time of printing. Because improvement is a constant goal at Mazda, we reserve the right to make changes in specifi cations at any time without notice and without obligation. Air Conditioning and the Environment Your Mazda's genuine air conditioner is fi lled with HFC134a (R134a), a refrigerant that has been found not to damage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda Dealer. Perchlorate Certain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries,...] may contain Perchlorate Material-- Special handling may apply for service or vehicle end of life disposal. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Please be aware that this manual applies to all models, equipment and options. As a result, you may fi nd some explanations for equipment not installed on your vehicle. ©2013 Mazda Motor Corporation Printed in Japan June 2013 (Print1) Mazda3_8CX9-EA-13F_Edition1.indb 3Mazda3_8CX9-EA-13F_Edition1.indb 32013/05/17 11:48:202013/05/17 11:48:20 How to Use This Manual We want to help you get the most driving pleasure from your vehicle. Your owner's manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can fi nd out about the features, important safety information, and driving under various road conditions. The symbol below in this manual means "Do not do this" or "Do not let this happen". Index: A good place to start is the Index, an alphabetical listing of all information in your manual. You'll fi nd several WARNINGs, CAUTIONs, and NOTEs in the manual. WARNING A WARNING indicates a situation in which serious injury or death could result if the warning is ignored. CAUTION A CAUTION indicates a situation in which bodily injury or damage to your vehicle, or both, could result if the caution is ignored. NOTE A NOTE provides information and sometimes suggests how to make better use of your vehicle. The symbol below, located on some parts of the vehicle, indicates that this manual contains information related to the part. Please refer to the manual for a detailed explanation. Mazda3_8CX9-EA-13F_Edition1.indb 4Mazda3_8CX9-EA-13F_Edition1.indb 42013/05/17 11:48:202013/05/17 11:48:20 Table of Contents Pictorial Index Interior, exterior views and part identification of your Mazda. 1 Essential Safety Equipment Important information about safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. 2 Before Driving Use of various features, including keys, doors, mirrors and windows. 3 When Driving Information concerning safe driving and stopping. 4 Interior Features Use of various features for ride comfort, including air-conditioning and audio system. 5 Maintenance and Care How to keep your Mazda in top condition. 6 If Trouble Arises Helpful information on what to do if a problem arises with the vehicle. 7 Customer Information and Reporting Safety Defects Important consumer information including warranties and add-on equipment. 8 Specifications Technical information about your Mazda. 9 Index 10 Mazda3_8CX9-EA-13F_Edition1.indb 5Mazda3_8CX9-EA-13F_Edition1.indb 52013/05/17 11:48:222013/05/17 11:48:22 Mazda3_8CX9-EA-13F_Edition1.indb 6Mazda3_8CX9-EA-13F_Edition1.indb 62013/05/17 11:48:222013/05/17 11:48:22 1–1 1 Pictorial Index Interior, exterior views and part identifi cation of your Mazda. Interior Overview ............................................................................... 1-2 Interior Equipment (View A) ........................................................ 1-2 Interior Equipment (View B) ........................................................ 1-3 Interior Equipment (View C) ........................................................ 1-4 Exterior Overview .............................................................................. 1-5 (4-Door) ........................................................................................ 1-5 (5-Door) ........................................................................................ 1-6 Mazda3_8CX9-EA-13F_Edition1.indb 1Mazda3_8CX9-EA-13F_Edition1.indb 12013/05/17 11:48:222013/05/17 11:48:22 The equipment and installation position varies by vehicle Pictorial Index Interior Overview 1–2 Interior Equipment (View A) Door-lock knob ..................................................................................................... page 3-19 DSC OFF switch ................................................................................................... page 4-76 Tire pressure monitoring system set switch .......................................................... page 4-90 Turn and lane-change signal ...........................................…

Text truncated - open the document above for the full version.

* Some models. 4–61 When Driving Forward Sensing Camera Forward Sensing Camera * Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward Sensing Camera (FSC) is positioned near the rearview mirror and used by the following systems. • High Beam Control System (HBC) • Lane Departure Warning System (LDWS) The Forward Sensing Camera (FSC) determines the conditions ahead of the vehicle while traveling at night and detects traffi c lanes. The distance in which the Forward Sensing Camera (FSC) can detect objects varies depending on the surrounding conditions. Mazda3_8CX9-EA-13F_Edition1.indb 61Mazda3_8CX9-EA-13F_Edition1.indb 612013/05/17 11:49:522013/05/17 11:49:52 4–62 When Driving Forward Sensing Camera CAUTION Heed the following cautions to assure the correct operation of the Forward Sensing Camera (FSC). ¾ Do not remove the Forward Sensing Camera (FSC) cover. ¾ Do not place objects on the dashboard which refl ect light. ¾ Do not apply accessories, stickers or fi lm to the windshield near the Forward Sensing Camera (FSC). If there are objects in front of the Forward Sensing Camera (FSC) lens, even a transparent sticker, they will cause the system to not operate correctly. ¾ Always keep the windshield glass around the camera clean by removing dirt or fogging. Use the windshield defroster to remove fogging on the windshield. ¾ When cleaning the windshield, do not allow glass cleaners or similar cleaning agent to get on the Forward Sensing Camera (FSC) lens. In addition, do not touch the Forward Sensing Camera (FSC) lens. ¾ Consult an Authorized Mazda Dealer regarding cleaning the interior side of the windshield around the Forward Sensing Camera (FSC). ¾ Be careful not to scratch the Forward Sensing Camera (FSC) lens or allow it to get dirty. Also, do no take the camera apart. Otherwise, it could result in damage or malfunction. ¾ Consult an Authorized Mazda Dealer before performing repairs around the Forward Sensing Camera (FSC). ¾ The Forward Sensing Camera (FSC) is installed to the windshield. Consult an Authorized Mazda Dealer for windshield repair and replacement. ¾ When performing repairs around the rearview mirror, consult an Authorized Mazda Dealer. ¾ Consult an Authorized Mazda Dealer regarding cleaning of the Forward Sensing Camera (FSC) lens. ¾ Do not hit or apply strong force to the Forward Sensing Camera (FSC) or the area around it. If strong force is applied, stop using the Lane Departure Warning System (LDWS) and the High Beam Control System (HBC), and consult an Authorized Mazda Dealer. ¾ The direction in which the Forward Sensing Camera (FSC) is pointed has been fi nely adjusted. Do not change the installation position of the Forward Sensing Camera (FSC) or remove it. Otherwise, it could result in damage or malfunction. Mazda3_8CX9-EA-13F_Edition1.indb 62Mazda3_8CX9-EA-13F_Edition1.indb 622013/05/17 11:49:522013/05/17 11:49:52 4–63 When Driving Brake Brake System Foot Brake Your Mazda has power-assisted brakes that adjust automatically through normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual. WARNING Do not coast with the engine stalled or turned off , fi nd a safe place to stop: Coasting with the engine stalled or turned off is dangerous. Braking will require more eff ort, and the brake's power-assist could be depleted if you pump the brake. This will cause longer stopping distances or even an accident. Shift to a lower gear when going down steep hills: Driving with your foot continuously on the brake pedal or steadily applying the brakes for long distances is dangerous. This causes overheated brakes, resulting in longer stopping distances or even total brake failure. This could cause loss of vehicle control and a serious accident. Avoid continuous application of the brakes. Dry off brakes that have become wet by driving slowly, releasing the accelerator pedal and lightly applying the brakes several times until the brake performance returns to normal: Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been aff ected. CAUTION ¾ Do not drive with your foot held on the clutch pedal or brake pedal, or hold the clutch pedal depressed halfway unnecessarily. Doing so could result in the following: ¾ The clutch and brake parts will wear out more quickly. ¾ The brakes can overheat and adversely aff ect brake performance. ¾ Always depress the brake pedal with the right foot. Applying the brakes with the unaccustomed left foot could slow your reaction time to an emergency situation resulting in insuffi cient braking operation. ¾ Wear shoes appropriate for driving in order to avoid your shoe contacting the brake pedal when depressing the accelerator pedal. Mazda3_8CX9-EA-13F_Edition1.indb 63Mazda3_8CX9-EA-13F_Edition1.indb 632013/05/17 11:49:532013/05/17 11:49:53 4–64 When Driving Brake Parking Brake CAUTION Driving with the parking brake on will cause excessive wear of the brake parts. NOTE For parking in snow, refer to Winter Driving (page 3-48 ) regarding parking brake use. Setting the parking brake Depress the brake pedal and then fi rmly pull the parking brake lever fully upwards with suffi cient force to hold the vehicle in a stationary position. Releasing the parking brake Depress the brake pedal and pull the parking brake lever upwards, then press the release button. While holding the button, lower the parking brake lever all the way down to the released position. Warning Light The warning light turns on when the system has a malfunction. Refer to Warning Lights on page 4-21 . Brake Pad Wear Indicator When the disc brake pads become worn, the built-in wear indicators contact the disc plates. This causes a screeching noise to warn that the pads should be replaced. When you hear this noise, consul…

Text truncated - open the document above for the full version.

5–136 Interior Features Interior Equipment Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sunvisor Side Extension Sunvisors The visor extender extends the sunvisor's range of sun shading. To use, pull it out. CAUTION When moving the sunvisor, retract the visor extender to its original position. Otherwise, the visor extender could hit the rearview mirror. Vanity Mirrors To use the vanity mirror, lower the sunvisor. If your vehicle is equipped with a vanity mirror light, it will illuminate when you open the cover. Mazda3_8CX9-EA-13F_Edition1.indb 136Mazda3_8CX9-EA-13F_Edition1.indb 1362013/05/17 11:51:332013/05/17 11:51:33 * Some models. 5–137 Interior Features Interior Equipment Interior Lights Overhead Lights Switch Position Overhead Lights Light off • Light is on when any door is open • Light is on or off when the illuminated entry system is on Light on With Map Lights Without Map Lights NOTE (With map lights) The map lights and rear overhead light also turn on and off when the front overhead light switch is operated. Map Lights * When the overhead light switch is in the door or off position, press the lens to illuminate the map lights, and then press the lens again to turn them off. NOTE The map lights will not turn off even if the lens is pressed in the following cases: • The overhead light switch is in the ON position. • The overhead light switch is in the door position with the door open. • The illuminated entry system is on. Mazda3_8CX9-EA-13F_Edition1.indb 137Mazda3_8CX9-EA-13F_Edition1.indb 1372013/05/17 11:51:332013/05/17 11:51:33 5–138 Interior Features Interior Equipment Luggage Compartment Lights (5–door) Switch Position Luggage Compartment Light Light off Light on when the liftgate is open Trunk Light (4–door) The trunk light is on when the lid is open and off when it's closed. NOTE To prevent the battery from being discharged, do not leave the trunk open for a long period when the engine is not running. Illuminated Entry System When the illuminated entry system operates, the overhead light (switch is in the DOOR position) turn on for: • About 30 seconds after the driver's door is unlocked and the ignition is switched off. • About 15 seconds after all doors are closed and the ignition is switched off. • About 5 seconds after all doors are closed and the ignition is switched off when the key is out of the vehicle. • Illuminates for about 15 seconds when the ignition is returned from ACC to OFF. The light also turns off when: • The ignition is switched on and all doors are closed. • The driver's door is locked. NOTE • Battery saver If any door is left open with the overhead light switch in the DOOR position, or the liftgate/trunk lid is left open, the overhead light or luggage compartment light/trunk light turns off after about 30 minutes to prevent battery depletion. • The operation of the illuminated entry system can be changed. Refer to Personalization Features on page 9-10 . Mazda3_8CX9-EA-13F_Edition1.indb 138Mazda3_8CX9-EA-13F_Edition1.indb 1382013/05/17 11:51:352013/05/17 11:51:35 * Some models. 5–139 Interior Features Interior Equipment Accessory Sockets Only use genuine Mazdaaccessories or the equivalent requiring no greater than 120 W (DC 12 V, 10 A). Type A The accessory sockets can be used regardless of whether the ignition is on or off. Type B * The ignition must be switched to ACC or ON. With CD Player Without CD Player CAUTION ¾ To prevent accessory socket damage or electrical failure, pay attention to the following: ¾ Do not use accessories that require more than 120 W (DC 12 V, 10 A). ¾ Do not use accessories that are not genuine Mazda accessories or the equivalent. ¾ Close the cover when the accessory socket is not in use to prevent foreign objects and liquids from getting into the accessory socket. ¾ Correctly insert the plug into the accessory socket. ¾ Do not insert the cigarette lighter into the accessory socket. Mazda3_8CX9-EA-13F_Edition1.indb 139Mazda3_8CX9-EA-13F_Edition1.indb 1392013/05/17 11:51:352013/05/17 11:51:35 5–140 Interior Features Interior Equipment ¾ Noise may occur on the audio playback depending on the device connected to the accessory socket. ¾ Depending on the device connected to the accessory socket, the vehicle's electrical system may be aff ected, which could cause the warning light to illuminate. Disconnect the connected device and make sure that the problem is resolved. If the problem is resolved, disconnect the device from the socket and switch the ignition off . If the problem is not resolved, consult an Authorized Mazda Dealer. NOTE To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling. Connecting the accessory socket 1. Open the lid. 2. Pass the connection plug cord through the cutout of the console and insert the plug into the accessory socket. Plug Cup Holder WARNING Never use a cup holder to hold hot liquids while the vehicle is moving: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded. Do not put anything other than cups or drink cans in cup holders: Putting objects other than cups or drink cans in a cup holder is dangerous. During sudden braking or maneuvering, occupants could be hit and injured, or objects could be thrown around the vehicle, causing interference with the driver and the possibility of an accident. Only use a cup holder for cups or drink cans. Front Mazda3_8CX9-EA-13F_Edition1.indb 140Mazda3_8CX9-EA-13F_Edition1.indb 1402013/05/17 11:51:362013/05/17 11:51:36 * Some models. 5–141 Interior Features Interior Equipment Rear * The rear cup holder is on the rear center armrest. Bottle Holder Bottle holders are on the inside of the doors. Bottle holder CAUTION Do not use the bottle holders for containers without caps. The contents may spill when the door is opened or closed. Mazda3_8CX9-EA-13F_Edition1.indb 141Mazda3_8CX9-EA-13F_Edition1.indb 1412…

Text truncated - open the document above for the full version.

Johnson Controls Inc MAZDA_GEN_65_CMU EXTERNAL PHOTOGRAPHS Johnson Controls Inc MAZDA_GEN_65_CMU Johnson Controls Inc MAZDA_GEN_65_CMU

Johnson Controls Inc MAZDA_GEN_65_CMU INTERNAL PHOTOGRAPHS Johnson Controls Inc MAZDA_GEN_65_CMU Johnson Controls Inc MAZDA_GEN_65_CMU Johnson Controls Inc MAZDA_GEN_65_CMU Johnson Controls Inc MAZDA_GEN_65_CMU Johnson Controls Inc MAZDA_GEN_65_CMU

Report No.: 134484R-RFUSP42V01 Page : 1 of 91 FCC Test Report Product Name Automotive Electronics Infotainment Head Unit Model No MAZDA_GEN_65_CMU FCC ID CB262932 Applicant Johnson Controls Interiors L.L.C. Address 915 E 32nd Street, Holland, MI, 49423, USA Date of Receipt Apr. 25, 2013 Issue Date Jun. 20, 2013 Report No. 134484R-RFUSP42V01 Report Version V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No.: 134484R-RFUSP42V01 Page : 2 of 91 Test Report Certification Issue Date: Jun. 20, 2013 Report No.: 134484R-RFUSP42V01 Product Name Automotive Electronics Infotainment Head Unit Applicant Johnson Controls Interiors L.L.C. Address 915 E 32nd Street, Holland, MI, 49423, USA Manufacturer Johnson Controls Interiors L.L.C. Model No. MAZDA_GEN_65_CMU FCC ID CB262932 EUT Rated Voltage DC 10V~16V EUT Test Voltage DC 12V Trade Name Johnson Controls Inc Applicable Standard FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.4: 2003, ANSI C63.10: 2009, KDB 558074 Test Result Complied The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Documented By : ( Senior Adm. Specialist / Rita Huang ) Tested By : ( Engineer / Nowal Kuo ) Approved By : ( Manager / Vincent Lin ) Report No.: 134484R-RFUSP42V01 Page : 3 of 91 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .....................................................................................................5 1.1. EUT Description............................................................................................................................5 1.2. Operational Description ................................................................................................................7 1.3. Tested System Details....................................................................................................................8 1.4. Configuration of Tested System ....................................................................................................8 1.5. EUT Exercise Software .................................................................................................................9 1.6. Test Facility .................................................................................................................................10 2. Conducted Emission.................................................................................................................. 11 2.1. Test Equipment............................................................................................................................11 2.2. Test Setup ....................................................................................................................................11 2.3. Limits ..........................................................................................................................................12 2.4. Test Procedure .............................................................................................................................12 2.5. Uncertainty ..................................................................................................................................12 2.6. Test Result of Conducted Emission.............................................................................................13 3. Peak Power Output ...................................................................................................................14 3.1. Test Equipment............................................................................................................................14 3.2. Test Setup ....................................................................................................................................14 3.3. Limits ..........................................................................................................................................14 3.4. Test Procedure .............................................................................................................................14 3.5. Uncertainty ..................................................................................................................................14 3.6. Test Result of Peak Power Output...............................................................................................15 4. Radiated Emission .....................................................................................................................18 4.1. Test Equipment............................................................................................................................18 4.2. Test Setup ....................................................................................................................................19 4.3. Limits ..........................................................................................................................................20 4.4. Test Procedure .............................................................................................................................21 4.5. Uncertainty ..................................................................................................................................21 4.6. Test Result of Radiated Emission................................................................................................22 5. RF antenna conducted test........................................................................................................34 5.1. Test Equipment.....................................................................................................…

Text truncated - open the document above for the full version.

Report No.: 134484R-RFUSP42V01 Page : 1 of 2 Attachment 1: EUT Test Setup Photographs Front View of Radiated Test Back View of Radiated Test Report No.: 134484R-RFUSP42V01 Page : 2 of 2 Front View of Radiated Test (Horn) Back View of Radiated Test (Horn)