CFD5G2RUTBPCS Licensed Transmitter - 5G Tri Band RRH

Attestation not applicable in 2022

1 MUTUAL NON-DISCLOSURE AGREEMENT THIS MUTUAL NON-DISCLOSURE AGREEMENT (this “Agreement”) is entered into as of [Date] (the “Effective Date”), by and between [CUSTOMER NAME] (“CUSTOMER”), having a place of business at [Customer Address] and Fujitsu Network Communications, Inc. (the “Company”), having a place of business at 2801 Telecom Parkway, Richardson, TX 75082. Each of [Customer] and the Company may be referred to in this Agreement as a “Party”, and collectively, as the “Parties”. WHEREAS, certain financial, technical and non-technical, business and other information, including, but not limited to, business plans, analyses, forecasts, predictions, projections, intellectual property, trade secrets, contracts, proposals, documents, mechanical and electronic design drawings, specifications, software, technical or engineering data, test procedures, schematics, writings, materials, methods, operations, procedures, know-how, financial information, financial statements and other business data and other information (hereinafter collectively referred to as “Data and Information”), some of which may be Confidential Information (as defined below), may be disclosed: (a) by [Customer] itself and/or through its Representatives (as defined below) to the Company itself and/or its Representatives; and/or (b) by the Company itself and/or its Representatives to [Customer] itself and/or through its Representatives, in the case of each of clause (a) and (b), the Party disclosing such information (through itself or its Representatives) being the “Disclosing Party” and the Party receiving such information (through itself or its Representatives) being the “Receiving Party”. For purposes of this Agreement, “Affiliate” means, with respect to a Party, any person or entity directly or indirectly controlling, controlled by or under common control with such Party. NOW, THEREFORE, in consideration of the terms and conditions hereinafter set forth, and other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the Parties mutually agree as follows: 1. This Agreement confirms the understanding between the Parties concerning a Receiving Party's obligation of strict confidentiality with respect to Confidential Information (as defined below) furnished by the Disclosing Party to a Receiving Party. For purposes of this Agreement, “Confidential Information” means any and all Data and Information received by a Receiving Party from the Disclosing Party, whether before or after the Effective Date, and whether written or oral, and if written, however produced or reproduced, which Data and Information is marked “Confidential” or “Proprietary” or bears a marking of like import, or the Disclosing Party states is to be considered confidential or proprietary, or would logically be considered confidential or proprietary, and any and all information generated therefrom. 2. This Agreement shall expire on the third (3 rd ) anniversary of the Effective Date, unless sooner terminated, renewed or extended in accordance with the terms of this Agreement. Either Party may, at any time and in its sole and absolute discretion for any reason or no reason whatsoever, terminate this Agreement upon prior written notice to the other Party. Notwithstanding the expiration or termination of this Agreement (for any reason or no reason), cessation of discussions, or the successful completion of a potential business relationship, for a period of three (3) years following the date of disclosure of Confidential Information by the 2 Disclosing Party to a Receiving Party (the “Non-Disclosure Period”), such Confidential Information shall not be disclosed to any third parties, and release of and/or access to such Confidential Information shall be restricted to those employees, officers, agents and representatives of the other Party's organization who have a need to know such Confidential Information (its “Representatives”, which term shall include such Party’s Affiliates and the employees, officers, agents and representatives of such Party’s Affiliates). For clarity, expiration or termination of this Agreement (for any reason or no reason) shall not affect the Non- Disclosure Period. All of a Party’s Representatives shall be informed of the confidential nature of the Confidential Information and the restrictions of this Agreement. Any act or omission of a Party’s Representatives that would be a breach of this Agreement if committed by the Party itself shall be deemed to be a breach of this Agreement by the Party. In the event that the Receiving Party determines that it must disclose the Disclosing Party’s Confidential Information to third parties other than its Representatives, then all such third parties must enter into a separate agreement directly with the Disclosing Party prior to any disclosure of the Disclosing Party’s Confidential Information to such third parties by the Receiving Party. The Receiving Party shall use the same degree of care to protect the secrecy and confidentiality of the Confidential Information as it uses to protect its own confidential information and in all events at least a reasonable degree of care. 3. The original and all copies of all or any part of the Disclosing Party’s Confidential Information (including, without limitation, any and all tangible embodiments of Confidential Information that are in the Receiving Party’s possession or under its control, including, without limitation, any Confidential Information that may be found in analyses, compilations, evaluations, studies or other documents based on, containing or referencing the Confidential Information provided by the Disclosing Party and/or prepared by or for the Receiving Party, whether in hard-copy or machine-readable form), shall be returned to the Disclosing Party or destroyed by the Receiving Party, in either case, promptly following written request by the Disclosing Party, except that a Receiving Party may retain a singl…

Text truncated - open the document above for the full version.

FUJITSU NETWORK COMMUNICATIONS, INC. 2801 Telecom Parkway, Richardson, Texas 75082-3515 Telephone: (972) 690-6000 (800) 777-FAST (U.S.) July 11, 2022 Attention: Application Examiner RE: Request for Confidentiality Applicant: Fujitsu Network Communications, Inc. Model: TA08029-B130 FCC ID: CFD5G2RUTB To Whom It May Concern: Permanent Confidentiality Request is hereby submitted by Fujitsu Network Communications, Inc. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Block Diagram • Schematics • User Manual • Internal Photographs - This product is not internally accessible to the end user because the enclosure is fastened together with special line-head (LH) security screws that cannot be removed/unfastened without a special security tool, which is not provided to any customers. An NDA between Fujitsu and their customer is also provided. • Parts List / Tune Up • Operational Description • SDR Software / Security Info Short-term Confidentiality Request is hereby submitted by Fujitsu Network Communications, Inc. to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: • External Photos • Test Setup Photos These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 11 th Day of July 2022 By: Title: Signed Principal Compliance Engineer Corey M. Dayton Printed

FUJITSU NETWORK COMMUNICATIONS, INC. 2801 Telecom Parkway, Richardson, Texas 75082-3515 Telephone: (972) 690-6000 (800) 777-FAST (U.S.) August 1, 2022 Nemko North America Inc. Attn: Director of Certification 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: CFD5G2RUTB Authority to Act as Agent FCC On behalf of Fujitsu Network Communications, Inc., I appoint Jenny Gibbs of Nemko USA, Inc. 2650 FM 407, Suite 255P Bartonville, TX 76226 to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in FCC regulations will have affixed to it a label identical to that submitted for approval with this application. In signing this letter, Applicant certifies that neither the applicant nor any party to the application is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko North America Inc., still resides Radius Networks, Inc., 1228 31st St. SW, Suite 2, Washington D.C. 20007. Dated this __11 Day of __July , 2022 Agency agreement expiration date: 08/31/2023 Signed: Print Name: Corey M. Dayton Title: Principal Compliance Engineer

Triple Band RRH Photos FCC ID: CFD5G2RUTB ______________________________________________________ Triple Band RRH Photos FCC ID: CFD5G2RUTB ______________________________________________________ Back View Triple Band RRH Photos FCC ID: CFD5G2RUTB ______________________________________________________ Triple Band RRH Photos FCC ID: CFD5G2RUTB ______________________________________________________ Triple Band RRH Photos FCC ID: CFD5G2RUTB ______________________________________________________ Triple Band RRH Photos FCC ID: CFD5G2RUTB ______________________________________________________

FCC Label – TB RRH © 2022 Fujitsu Limited 1 TB RRH FCC Label Location © 2022 Fujitsu Limited RURightSideView Backof RU RULeftSideView Backof RU FCC label 2

www.nemko.com ARFWL (FCC & ISED MPE Calculation)).docx; Date: May, 2021 Assessment report 467684-1R2ARFWL Date of issue: August 24, 2022 Applicant: Fujitsu Network Communications, Inc. Product: Gen2 Tri Band RU for North America Model G2_N71N29N26-RU Type of assessment: MPE Calculation Report Specifications:  FCC 47 CFR Part 1 Subpart I, §§1.1307, 1.1310  FCC 47 CFR Part 2 Subpart J, §2.1091  KDB 447498 D01 General RF Exposure Guidance v06 Choose Scandinavian trust Report reference ID: 467684-1R2ARFWL Page 2 of 6 Lab and test locations Company name Nemko USA, Inc. Address 1110 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com Prepared by James Cunningham, EMC/MIL/WL Supervisor Date August 24, 2022 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party because of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: 467684-1R2ARFWL Page 3 of 6 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Section 1 Evaluation summary ........................................................................................................................................................................... 4 1.1 MPE exemption for stand-alone transmission .................................................................................................................................................................... 4 Section 1 Evaluation summary Report reference ID: 467684-1R2ARFWL Page 4 of 6 Section 1 Evaluation summary 1.1 MPE exemption for stand-alone transmission 1.1.1 References, definition, and limits FCC §2.1091(d) (2) For operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from the whole-body SAR limits and listed in Table 1 in paragraph (e)(1) of this section, may be used instead of whole-body SAR limits as set forth in paragraphs (a) through (c) of this section to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b) of this part, except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. Table 1.1-1: Table 1 to §1.1310(e)(1)—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (i) Limits for Occupational/Controlled Exposure 0.3–3.0 614 1.63 *(100) ≤6 3.0–30 1842 / f 4.89 / f *(900 / f 2 ) <6 30–300 61.4 0.163 1.0 <6 300–1500 f / 300 <6 1500–100000 5 <6 (ii) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) <30 1.34–30 824 / f 2.19 / f *(180 / f 2 ) <30 30–300 27.5 0.073 0.2 <30 300–1500 f / 1500 <30 1500–100000 1.0 <30 Notes: f = frequency in MHz. * = Plane-wave equivalent power density. Equation from Page 18 of OET Bulletin 64, Edition 97-01: 푆= 푃퐺 4휋푅 2 where: S = power density (mW/cm 2 or W/m 2 ) P = power input to the antenna (mW or W) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm or m) Section 1 Evaluation summary Report reference ID: 467684-1R2ARFWL Page 5 of 6 1.1.2 EUT technical information Operational frequency 862 – 869 MHz (Band n26) 717 – 728 MHz (Band n29) 617 – 652 MHz (Band n71) Antenna type External (The EUT is professionally installed) Antenna gain See below Number of antennas 4 Maximum transmitter conducted power 38.70 dBm (Band n26) (7.41 Watts) 42.87 dBm (Band n29) (19.39 Watts) 44.51 dBm (Band n71) (28.25 Watts) Max power across four ports 44.72 dBm (Band n26) (29.65 Watts) 48.49 dBm (Band n29) (77.45 Watts) 50.53 dBm (Band n71) (112.98 Watts) The maximum permitted antenna gain is calculated based on the transmitter conducted power and the maximum permitted EIRP or EIRP density (as appropriate). Band n26: Maximum permitted EIRP: 60 dBm (1 kW). From maximum transmitted power above, the maximum permitted antenna gain is: (60 – 44.52) = 15.48 dBi. Band n29: Maximum permitted EIRP density: 60 dBm/MHz. From measurement data, maximum measured power density is 44.15 dBm/MHz therefore the maximum permitted antenna gain is (60 – 44.15) = 15.85 dBi. Band n71: Maximum permitted EIRP density: 60 dBm/MHz. From measurement data, maximum measured power density is 45.83 dBm/MHz therefore the maximum permitted antenna gain is (60 – 45.83) = 14.17 dBi. 1.1.3 MPE exemption calculations Note: In the calculations below, “number of antennas = 4” adds the correct 10Log(4) correction to account for correlated output of 4 antenna ports. For example, in band n26, the maximum single antenna gain is 15.48 dBi but the total system gain is 21.50 dBi reflecting the addition of 10Log(4)=6.02 dB for the 4 antennas. Band n26: Fundamental tr…

Text truncated - open the document above for the full version.

www.nemko.com FCC 47 CFR Part 15B & ICES-003 Issue 7.dotm, Version V1.2 Nemko USA Inc., a testing laboratory, is accredited by NVLAP. The tests included in this report are within the scope of this accreditation. 467684-1TRFEMC Date of issue: August 11, 2022 Applicant: Fujitsu Network Communications, Inc. Product: Gen2 Tri Band RU for North America Model: Variant(s): G2_N71N29N26-RU None Specifications:  FCC 47 CFR Part 15, Subpart B – Verification Test report Report reference ID: 467684-1TRFEMC Page 2 of 27 Lab and test locations Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad State California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com FCC Site Number Test Firm Registration Number: 392943; Designation Number: US5058 ISED Test Site 2040B-3 Tested by Lan Sayasane, EMC Test Engineer Reviewed by James Cunningham, EMC/MIL/WL Supervisor Review date August 11, 2022 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: 467684-1TRFEMC Page 3 of 27 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Section 1 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications ................................................................................................................................................................................................................. 4 1.2 Exclusions ............................................................................................................................................................................................................................... 4 1.3 Statement of compliance...................................................................................................................................................................................................... 4 1.4 Test report revision history .................................................................................................................................................................................................. 4 Section 2 Summary of test results ...................................................................................................................................................................... 5 2.1 Sample information............................................................................................................................................................................................................... 5 2.2 Testing period ........................................................................................................................................................................................................................ 5 2.3 Emissions test results ............................................................................................................................................................................................................ 5 Section 3 Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Disclaimer .............................................................................................................................................................................................................................. 6 3.2 Applicant ................................................................................................................................................................................................................................ 6 3.3 Manufacturer......................................................................................................................................................................................................................... 6 3.4 EUT information .................................................................................................................................................................................................................... 6 3.5 EUT exercise and monitoring details ................................................................................................................................................................................... 6 3.6 EUT setup details ................................................................................................................................................................................................................... 7 Section 4 Engineering considerations ................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko USA Inc., a testing laboratory, is accredited by NVLAP. The tests included in this report are within the scope of this accreditation. O N E W O R L D O U R A P P R O V A L Test report 467684-1R2TRFWL Date of issue: August 24, 2022 Applicant: Fujitsu Network Communications, Inc. Product: Gen2 Tri Band RU for North America Model: Model variant: G2_N71N29N26-RU None Specifications:  FCC 47 CFR Part 27 Miscellaneous Wireless Communications Services  FCC 47 CFR Part 90 Private Land Mobile Radio Services Report reference ID: 467684-1R2TRFWL Page 2 of 185 Lab and test locations Company name Nemko USA Inc. Address 2210 Faraday Ave, Suite 150 City Carlsbad Province California Postal code 92008 Country USA Telephone +1 760 444 3500 Website www.nemko.com Tested by Lan Sayasane, EMC Test Engineer Reviewed by James Cunningham, EMC/MIL/WL Supervisor Review date August 24, 2022 Reviewer signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko USA’s ISO/IEC 17025 accreditation. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Copyright notification Nemko USA Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko USA Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko USA Inc. Report reference ID: 467684-1R2TRFWL Page 3 of 185 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer ................................................................................................................................................................................................ 4 1.2 Test specifications ................................................................................................................................................................................................................. 4 1.3 Statement of compliance ..................................................................................................................................................................................................... 4 1.4 Exclusions .............................................................................................................................................................................................................................. 4 1.5 Test report revision history .................................................................................................................................................................................................. 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 27 test results ......................................................................................................................................................................................................... 5 2.2 FCC Part 90 test results ......................................................................................................................................................................................................... 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .............................................................................................................................................................................................................. 6 3.2 EUT information .................................................................................................................................................................................................................... 6 3.3 Technical information ........................................................................................................................................................................................................... 6 3.4 Product description and theory of operation ..................................................................................................................................................................... 6 3.5 EUT exercise details .............................................................................................................................................................................................................. 6 3.6 EUT setup diagram ................................................................................................................................................................................................................ 7 Section 4. Engineering considerations ........................................................................................…

Text truncated - open the document above for the full version.

Section 8 Testing data Test name FCC §27.53 (h)(3) / §90.209 26 dB Occupied Bandwidth Specification FCC Part 27 / FCC Part 90 Report reference ID: 467684-1R2TRFWL Page 39 of 185 Band n26 (NB-IoT) – 0.2 MHz Band n26 – 5 MHz Section 8 Testing data Test name FCC §27.53 (h)(3) / §90.209 26 dB Occupied Bandwidth Specification FCC Part 27 / FCC Part 90 Report reference ID: 467684-1R2TRFWL Page 40 of 185 Band n29: Band OBW Declared Port Channel (MHz) 26 dB OBW (MHz) n29 5 MHz C 720.5 4.84 n29 5 MHz C 723 4.857 n29 5 MHz C 725.5 4.84 Table 8.3-8: 26 dB Occupied bandwidth, QPSK Modulation, 5 MHz Band OBW Declared Port Channel (MHz) 26 dB OBW n29 5 MHz C 720.5 4.84 n29 5 MHz C 723 4.874 n29 5 MHz C 725.5 4.823 Table 8.3-9: 26 dB Occupied bandwidth, 16QAM Modulation, 5 MHz Band OBW Declared Port Channel (MHz) 26 dB OBW n29 5 MHz C 720.5 4.84 n29 5 MHz C 723 4.857 n29 5 MHz C 725.5 4.806 Table 8.3-10: 26 dB Occupied bandwidth, 64QAM Modulation, 5 MHz Band OBW Declared Port Channel (MHz) 26 dB OBW n29 5 MHz C 720.5 4.823 n29 5 MHz C 723 4.857 n29 5 MHz C 725.5 4.84 Table 8.3-11: 26 dB Occupied bandwidth, 256QAM Modulation, 5 MHz Band OBW Declared Port Channel (MHz) 26 dB OBW n29 5 MHz C 720.5 4.84 n29 5 MHz C 723 4.857 n29 5 MHz C 725.5 4.84 Table 8.3-12: 26 dB Occupied bandwidth, 1024QAM Modulation, 5 MHz Band…

Text truncated - open the document above for the full version.