CGDRELAYCommunication repeater for Sensit sensors

SENSIT SYSTEM install guide 15-7-2014 | v1.4.2 SENSIT SYSTEM | MANUAL Introduction 2/93 CONTENT 1 INTRODUCTION _______________________________________________________ 6 2 SENSIT SYSTEM________________________________________________________ 7 2.1 ARCHITECTURE _________________________________________________ 7 2.2 THE SENSIT SENSORS ____________________________________________ 8 2.2.1 SENSIT IR ________________________________________________ 8 2.2.2 SENSIT FLUSH MOUNT _____________________________________ 9 2.2.3 SENSIT SURFACE MOUNT __________________________________ 10 2.3 RELAY NODES _________________________________________________ 11 2.3.1 SENSIT RELAY NODE 2G ___________________________________ 11 2.4 DATA COLLECTORS _____________________________________________ 12 2.4.1 STANDARD DATA COLLECTOR ______________________________ 12 2.4.2 DATA COLLECTOR GPRS ___________________________________ 13 2.5 ADDITIONAL EQUIPMENT ________________________________________ 14 2.5.1 ELECTRONIC PARKING LICENSE ____________________________ 14 2.5.2 SENSIT DISPLAY __________________________________________ 15 2.6 SENSIT INTERFACE SOFTWARE ___________________________________ 16 3 INSTALLATION PROCEDURE ____________________________________________ 17 3.1 HOW TO INSTALL THE SENSIT SYSTEM IN 4 STEPS ___________________ 17 3.1.1 STEP 1 – PREPARATION ___________________________________ 17 3.1.2 STEP 2 – DATA COLLECTORS AND RELAY NODE INSTALLATION __ 17 3.1.3 STEP 3 – SENSIT INSTALLATION _____________________________ 17 3.1.4 STEP 4 – SETTING UP THE SENSIT INTERFACE SOFTWARE _______ 17 4 RELAYNODETOOL ____________________________________________________ 18 4.1 SCALED DRAWING ______________________________________________ 18 4.2 START A NEW PROJECT __________________________________________ 19 4.3 THE FIRST SEGMENT ____________________________________________ 19 4.3.1 IMPORT MAP ____________________________________________ 20 4.3.2 SET THE SCALE___________________________________________ 20 4.3.3 PLACE THE DATA COLLECTOR ______________________________ 21 4.3.4 PLACE THE RELAY NODE __________________________________ 21 4.4 THE SECOND SEGMENT _________________________________________ 22 4.4.1 IMPORT MAP ____________________________________________ 22 4.4.2 SET THE SCALE___________________________________________ 23 4.4.3 PLACE THE DATA COLLECTOR ______________________________ 23 4.4.4 PLACE THE RELAY NODE __________________________________ 24 4.5 SAVE THE PROJECT _____________________________________________ 25 4.6 EXPORT PROJECT FILES __________________________________________ 25 4.6.1 PROJECT FILE ____________________________________________ 25 4.6.2 SAVE AS IMAGE __________________________________________ 25 4.6.3 PRINT PROJECT __________________________________________ 25 4.7 REQUEST PROJECT REVIEW ______________________________________ 25 5 INSTALLATION DATA COLLECTOR _______________________________________ 26 5.1 SAFETY PRECAUTIONS __________________________________________ 26 5.2 FCC AND IC DECLARATIONS ______________________________________ 26 Compliance statements (part15.19) _______________________________ 26 5.3 DATA COLLECTOR INSTALLATION _________________________________ 27 5.3.1 MOUNTING ______________________________________________ 27 5.3.2 POWER SUPPLY __________________________________________ 28 5.3.3 TCP/IP COMMUNICATION__________________________________ 28 5.3.4 ANTENNA _______________________________________________ 28 5.3.5 LED INDICATIONS ________________________________________ 28 5.4 DATA COLLECTOR GPRS INSTALLATION ____________________________ 29 5.4.1 MOUNTING ______________________________________________ 29 5.4.2 POWER SUPPLY __________________________________________ 30 5.4.3 BACKUP BATTERY ________________________________________ 30 5.4.4 SIM CARD _______________________________________________ 31 SENSIT SYSTEM | MANUAL Introduction 3/93 5.4.5 ANTENNA _______________________________________________ 31 6 DATA COLLECTOR CONFIGURATION _____________________________________ 32 6.1 TCP/IP CONFIGURATION _________________________________________ 32 6.2 GPRS CONFIGURATION __________________________________________ 33 6.3 GPRS MODEM LED BEHAVIOR ____________________________________ 33 6.3.1 RED LED ________________________________________________ 34 6.3.2 AMBER LED _____________________________________________ 34 6.4 VERIFY COMMUNICATION _______________________________________ 34 7 MOUNTING THE RELAY NODE 2G _______________________________________ 35 7.1 SAFETY PRECAUTIONS __________________________________________ 35 7.2 FCC AND IC DECLARATIONS ______________________________________ 35 Compliance statements (part15.19) _______________________________ 35 7.3 DIMENSIONS __________________________________________________ 36 7.4 INSTALLATION CONDITIONS _____________________________________ 36 7.5 REQUIRED INSTALLATION MATERIALS _____________________________ 36 7.6 INSTALLATION PROCEDURE ______________________________________ 37 7.7 BATTERY REPLACEMENT ________________________________________ 38 8 MOUNTING THE SENSIT IR _____________________________________________ 39 8.1 SAFETY PRECAUTIONS __________________________________________ 39 8.2 FCC AND IC DECLARATIONS ______________________________________ 39 Compliance statements (part15.19) _______________________________ 39 8.3 DIMENSIONS __________________________________________________ 40 8.4 INSTALLATION CONDITIONS _____________________________________ 40 8.5 REQUIRED INSTALLATION MATERIALS _____________________________ 40 8.6 INSTALLATION PROCEDURE ______________________________________ 41 8.7 REPLACEMENT _________________________________________________ 41 9 MOUNTING THE SENSIT FLUSH MOUNT __________________________________ 42 9.1 SAFETY PRECAUTIONS __________________________________________ 42 9.2 FCC AND IC DECLARATIONS ______________________________________ 42 Compliance statements (part15.19) _______________________________ 42 9.3 DIME…

Text truncated - open the document above for the full version.

N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E [email protected] www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request. Groenlo, 14 July 2014 Return address: PO Box 6, 7140 AA Groenlo, The Netherlands American Certification Body, Inc Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA To whom it may concern, We, N.V. Nederlandsche Apparatenfabriek "Nedap", hereby would like to apply for FCC certification of the following device: FCC ID : CGDRELAY FRN : 0007696149 Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US Antenna : Dipole Description : Communication repeater for Sensit sensors operating on 902-928 MHz The following PDF files (exhibits) are electronically submitted: 1. Cover letter (this document) 2. Request of Long-Term confidentiality 3. Application form 731 4. Antenna information 5. Bill of material 6. Circuit diagrams 7. Block diagram 8. Interior photograph report 9. Exterior photograph report 10. Label location incl. label 11. Theory of Operation 12. Test report in conformity with 47 CFR Part 15 13. Test setup photographs 14. Install Manual 15. Data sheet single chip Transceiver nRF905 16. RF Exposure 17. Statement 15.19(3) in the manual 18. Tracking number 966041 Best regards, N.V. Nederlandsche Apparatenfabriek “Nedap“ Jacques Hulshof Approbation Management

N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E [email protected] www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request. Return address: PO Box 6, 7140 AA Groenlo, The Netherlands American Certification Body, Inc Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Groenlo, 14 July 2014 Subject: Request of Confidentiality FCC ID: CGDRELAY To whom it may concern, Pursuant to section 0.457(d)(2)(i) and Section 0.459 of the FCC rules we herewith request the following exhibits, related to this application for FCC ID : CGDRELAY Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US Antennae : Dipole Description : Communication repeater for Sensit sensors operating on 902-928 MHz to be withheld from public inspection and to be kept confidential. The contents of these exhibits may not be disclosed to other parties than N.V. Nederlandsche Apparatenfabriek "Nedap" and TÜV Rheinland Nederland B.V.: 1. Bill of materials 2. Circuit diagram 3. Block diagram 4. Theory of operation (technical description) The reason for this request for confidentiality is that the information contained in the exhibits as listed above has been classified as company confidential. Disclosure of any portion of this information to other parties would cause substantial competitive harm. Best regards, N.V. Nederlandsche Apparatenfebriek “Nedap” Jacques Hulshof Approbation Management

N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E [email protected] www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request. Statement 15.19(3) in manual according to Tracking number 966041 Return address: PO Box 6, 7140 AA Groenlo, The Netherlands American Certification Body, Inc Certification Department 6731 Whittier Avenue, Suite C110 McLean, Virginia 22101 USA Groenlo, 14 July 2014 Subject: Putting statement 15.19(3) in manual of SENSIT REALY NODE 2G of FCC ID: CGDRELAY To whom it may concern, With tracking number 966041 we, N.V. Nederlandsche Apparatenfabriek “Nedap”, requested FCC to put the statement as mentioned in15.19 (3): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. in the manual. FCC’s answer: “The FCC allows the statement to be placed in a prominent location in the instruction manual or pamphlet supplied to the user”. There for the above mentioned statement will only be in the manual. Best regards, N.V. Nederlandsche Apparatenfabriek “Nedap“ Jacques Hulshof Approbation Management

1 Jacques Hulshof From:[email protected] Sent:vrijdag 11 juli 2014 20:08 To: Jacques Hulshof Subject:Response to Inquiry to FCC (Tracking Number 966041) Right-click here to download pictures. To help protect your privacy, Outlook prevented automatic download of this picture from the Internet. Link to Federal Communications Commission Home Page FCC Home | Search | RSS | Updates | E-Filing | Initiatives | Consumers | Find People Right-click here to download pictures. To help protect your privacy, Outlook prevented automatic download of this picture from the Internet. Office of Engineering and Technology Office of Engineering and Technology Inquiry on 07/10/2014 : Inquiry: Dear Madam or Sir, Soon we will file an application for FCC ID: CGDRELAY (see pdf) This product is for professional installation and is mounted 13-20 feet above ground. The FCC ID will laser printed on the flat part of the product and the rest of the product is curved. It is impossible to laser print on the curved part of this device. Adding a label to this special designed product will influence the nice look of this device. There for I request to put following statement as mentioned in15.19 (3) on the packaging box and/or in the manual only whatever is necessary: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. I wish to refer to the following (5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. I hope you can honor our request.. Kind regards Jacques 2 FCC response on 07/11/2014 (5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. The FCC allows the statement to be placed in a prominent location in the instruction manual or pamphlet supplied to the user. Attachment Details: Put statement on shipping box Do not reply to this message. Please select the Reply to an Inquiry Response link from the OET Inquiry System to add any additional information pertaining to this inquiry.

Page 1 of 6 Communication repeater for Sensit sensors operating on 902-928 MHz Brand Nedap Model SENSIT RELAY NODE 2G US Exterior Photographs Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 2 of 6 Description of item Description of EUT : Communication repeater for Sensit sensors operating on 902-928 MHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US FCC ID : CGDRELAY IC : 1444A-RELAY Type of service : New Application Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 09 July 2014 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 3 of 6 Table of contents 1 FRONT SIDE ............................................................................................................................................................................. 4 2 LEFT SIDE ................................................................................................................................................................................ 4 3 RIGHT SIDE .............................................................................................................................................................................. 5 4 BACK SIDE ............................................................................................................................................................................... 5 5 BOTTOM SIDE ......................................................................................................................................................................... 6 6 TOP SIDE .................................................................................................................................................................................. 6 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 4 of 6 1 Front side 2 Left side Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 5 of 6 3 Right side 4 Back side Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 6 of 6 5 Bottom side 6 Top side

Page 1 of 5 Communication repeater for Sensit sensors operating on 902-928 MHz Brand Nedap Model SENSIT RELAY NODE 2G US Label artwork and - position Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY New Application Page 2 of 5 Description of item Description of EUT : Communication repeater for Sensit sensors operating on 902-928 MHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US FCC ID : CGDRELAY IC : 1444A-RELAY Type of service : New Application Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 09 July 2014 Revised 28 July 2014 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY New Application Page 3 of 5 Table of contents 1 FRONT SIDE ............................................................................................................................................................................. 4 2 LABEL INFORMATION .......................................................................................................................................................... 4 2.1 FURTHER AWAY ................................................................................................................................................................... 4 2.2 CLOSE UP ............................................................................................................................................................................. 5 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY New Application Page 4 of 5 1 Front side 2 Label information 2.1 Further away Label information Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY New Application Page 5 of 5 2.2 Close up

Page 1 of 6 Communication repeater for Sensit sensors operating on 902-928 MHz Brand Nedap Model SENSIT RELAY NODE 2G US Interior Photographs Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 2 of 6 Description of item Description of EUT : Communication repeater for Sensit sensors operating on 902-928 MHz Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US FCC ID : CGDRELAY IC : 1444A-RELAY Type of service : New Application Applicant information Applicant's representative : Mr. Jacques Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo PO-box : 6 Postal code : 7140 AA City : Groenlo Country : The Netherlands Telephone number : +31 (0) 544 471111 Telefax number : +31 (0) 544 463475 09 July 2014 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 3 of 6 Table of contents 1 EXTERNAL VIEW .................................................................................................................................................................... 4 2 INTERNAL VIEW ..................................................................................................................................................................... 4 3 PRINTED CIRCUIT BOARD .................................................................................................................................................. 5 3.1 FRONT SIDE ......................................................................................................................................................................... 5 3.1.1 Total overview ........................................................................................................................................................... 5 3.1.2 Detailed ...................................................................................................................................................................... 5 3.2 BACK SIDE ........................................................................................................................................................................... 6 3.2.1 Antenna front side ..................................................................................................................................................... 6 3.2.2 Detailed ...................................................................................................................................................................... 6 Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 4 of 6 1 External view 2 Internal view Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 5 of 6 3 Printed circuit board 3.1 Front side 3.1.1 Total overview 3.1.2 Detailed Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: Type of Service: Communication repeater for Sensit sensors operating on 902-928 MHz N.V. Nederlandse Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G CGDRELAY 1444A-RELAY New Application Page 6 of 6 3.2 Back side 3.2.1 Antenna front side 3.2.2 Detailed

N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2 NL-7141 DC Groenlo P.O. Box 6 NL-7140 AC Groenlo T +31 (0)544 471 111 F +31 (0) 544 463 475 E [email protected] www.nedap.com Traderegister 08013836 ABN-AMRO 59.16.32.330 IBAN NL83ABNA0591632330 BIC ABNANL2A VAT NL006456285B01 The General Terms & Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website www.nedap.com and can be provided upon request. Groenlo, 28 July 2014 Declaration on radiation safety standard conformance To whom it may concern: N.V. Nederlandsche Apparatenfabriek “Nedap” Parallelweg 2 7141 DC Groenlo The Netherlands declares that the following product: FCC ID : CGDRELAY manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US Antenna : Dipole Description : Communication repeater for Sensit sensors operating on 902-928 MHz has a rated RF power of 67.8 mW, which means that the worst case prediction of power density (100% reflection) at 20 cm distance (worst case) can be calculated as follows: 2 **4R EIRP S π = (power density without reflection) 2 2 **4 *2 R EIRP S π = (power density with 100% reflection) 2 2 **4 *2 R EIRP S π = = 2 )20(* 8,67 cm mW π = 54 μW/cm² (Limit = 457 μW/cm²) Best regards, N.V. Nederlandsche Apparatenfabriek “Nedap“ Jacques Hulshof Approbation Officer

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland Nederland B.V. Eiberkamp 10 9351 VT Leek Telephone: +31 88 8887888 Telefax: +31 594 504804 E-mail: [email protected] Web: www.tuv.com Project number: 14013102.fcc01_Rev01 Page 1 of 38 TEST REPORT CONCERNING THE COMPLIANCE OF A SPREAD SPECTRUM TRANSMITTER, BRAND Nedap, MODEL SENSIT RELAY NODE 2G US WITH 47 CFR PART 15 (10-1-13 Edition), RSS-Gen (issue 3, December 2010) and RSS-210 (Issue 8, December 2010). 14013102.fcc01_Rev01 March 25, 2014 FCC listed Industry Canada R&TTE, LVD, EMC Notified Body : : : 90828 2932G-2 1856 Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: FCC Part 15, RSS-Gen, RSS-210 Spread Spectrum Transmitter N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY Project number : 14013102.fcc01_Rev01 Page 2 of 38 MEASUREMENT/TECHNICAL REPORT N.V. Nederlandsche Apparatenfabriek “Nedap” Model: SENSIT RELAY NODE 2G US FCC ID: CGDRELAY IC: 1444A-RELAY This report concerns: Original grant/certification Class 1 permissive change Verification Equipment type: Spread Spectrum Transmitter (DSS) Report prepared by: Name : Richard van der Meer Company name : TÜV Rheinland Nederland B.V. Address : Eiberkamp 10 Postal code/city : 9351VT Leek Mailing address : P.O. Box 37 Postal code/city : 9350 AA Leek Country : The Netherlands Telephone number : + 31 594 505 005 Telefax number : + 31 594 504 804 E-mail : [email protected] The data taken for this test and report herein was done in accordance with 47 CFR Part 15 (10-1-13 Edition) and the measurement procedures of FCC Public Notice DA 00-705. TÜV Rheinland Nederland B.V. at Leek, The Netherlands, certifies that the data is accurate and contains a true representation of the emission profile of the Equipment Under Test (EUT) on the date of the test as noted in the test report. I have reviewed the test report and find it to be an accurate description of the test(s) performed and the EUT so tested. Date: March 25, 2014 Signature: O. Hoekstra Senior Engineer Telecom TÜV Rheinland Nederland B.V. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: FCC Part 15, RSS-Gen, RSS-210 Spread Spectrum Transmitter N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY Project number : 14013102.fcc01_Rev01 Page 3 of 38 Description of test item Test item : Spread Spectrum Transmitter (DSS) Manufacturer : N.V. Nederlandsche Apparatenfabriek “Nedap” Brand : Nedap Model : SENSIT RELAY NODE 2G US Serial number : -- Receipt date : February 27,2014 Applicant information Applicant's representative : Mr. J. Hulshof Company : N.V. Nederlandsche Apparatenfabriek “Nedap” Address : Parallelweg 2 Postal code : 7141 DC City : Groenlo Country : The Netherlands Telephone number : +31 544 471 162 Telefax number : +31 544 463 475 Test(s) performed Location : Leek Test(s) started : February 27, 2014 Test(s) completed : March 20, 2014 Purpose of test(s) : Equipment Authorization (Original grant/certification) Test specification(s) : FCC 47 CFR Part 15, Subpart C, Section 15.247 (10-1-13 Edition) RSS-Gen (Issue 3, December 2010) an RSS-210 (Issue 8, December 2010) FCC Public Notice DA 00-705 march 30, 2000 Test engineer(s) : R. van der Meer Report written by : R. van der Meer Report date : March 25, 2014 This report shall not be reproduced, except in full, without the written permission of TÜV Rheinland Nederland B.V. The test results relate only to the item(s) tested. Test specification(s): Description of EUT: Manufacturer: Brand mark: Model: FCC ID: IC: FCC Part 15, RSS-Gen, RSS-210 Spread Spectrum Transmitter N.V. Nederlandsche Apparatenfabriek “Nedap” Nedap SENSIT RELAY NODE 2G US CGDRELAY 1444A-RELAY Project number : 14013102.fcc01_Rev01 Page 4 of 38 Table of contents 1 General information. .............................................................................................................................................. 5 1.1 Product description. ........................................................................................................................................ 5 1.1.1 Introduction. ............................................................................................................................................ 5 1.2 Related submittal(s) and/or Grant(s). ............................................................................................................. 5 1.2.1 General. .................................................................................................................................................. 5 1.3 Tested system details. .................................................…

Text truncated - open the document above for the full version.